Watt meter

- Máy có thể đo : Điện áp U, dòng điện A, công suất W, điện dung Ah... - Nguồn vào : 5-60VDC. - Dòng điện : 0-100A. - Đầu vào ( SOURCE ) ; Đầu ra ( LOAD ). dây đỏ (+) ; dây đen

RC Watt Meter 100A Bộ phân tích năng lượng LCD Cân bằng kỹ thuật số Kiểm tra điện áp pin Đặc trưng: Màn hình LCD kỹ thuật số cung cấp các bài đọc rõ ràng và rõ ràng. Xử lý gián đoạn lên đến 100 amps hiện tại và 50 amps dịch vụ liên tục. Kết nối kết thúc sạc với pin cung cấp số đọc mức pin theo thời gian thực. Điện áp DC từ 0 đến 60 volt. Nó phù hợp cho các hệ thống pin 12, 24, 36 và 48 volt. Chắc chắn và bền, nó có thể xử lý 50 A liên tục và 100 A đỉnh A 60V. Thông số kỹ thuật Màu: xanh Điện áp: (0) V-4V-60V 0,01V (Độ phân giải). Hiện tại: 0-100 Một đỉnh 0,01A (Độ phân giải). Công suất: 0-6554 W 0.1W (Độ phân giải). Phí: 0-65 Ah 0,001Ah (Độ phân giải). Năng lượng: 0-6554 wh 0,1 Wh (Độ phân giải). Thời gian cập nhật đo lường: 400mS. Tốc độ lấy mẫu tín hiệu: mẫu / s. Thời gian xếp hàng dữ liệu: 2 giây. Trong điện trở mạch: 0,001 Ohms. Hoạt động hiện tại: 7 mA. Điện áp phụ: 4.0V - 60V Kích thước: 8.2 * 5 * 2.3cm / 3.22 * 1.96 * 0.90in Trọng lượng 72g / 2.53oz Danh sách gói Máy đo 1 * watt meter Sách hướng dẩn #wattmeter #dodongdc #testtai #thudungluong #donghodovon #dongho #donghodientu #diy #doche

4-in-1 DC Multimeter: with 1.0 grade measuring accuracy, it combines Voltage, Current, Power and Energy measurement in one combo, super compact and lightweight that can be portable and easily used. Unique Voltage Alarm Function: the backlight and voltage value will flash simultaneously if the testing voltage is beyond alarm threshold (6-90V factory alarm value), and it can be set if needed Data Storage Design: it is designed to automatically storage the last testing data when suddenly powered off and the energy value can be reset by a short press after long pressing the function button for seconds Super Large Digital Display: 51x30mm easy reading LCD screen, clearly displays all testing figures at the same time, while the recessed button used to control the backlight, reset energy value, set voltage alarm threshold and choose measuring range Bonus Current S: it comes with a 100A/75mV current s, suitable for large range measurement, no need to waste extra money to get another one. 4-in-1 DC Multimeter is able to measure voltage, current, power and energy of most electrical devices (100A max.), which features high accuracy, low power consumption and easy reading large display. It also functions beyond voltage alarm, energy value reset, data storage, backlight control and measuring range option, suitable used for RV battery, voltage regulator, device detection and replacing various pointer-type electric meters. Specification Working Voltage: 6.5-100V/DC Power Rating: 100A/10000W Measuring Accuracy: 1.0 grade Power Consumption: 0.2W Measuring Speed: 2 times/s Net Weight: 190g/0.42lb/6.70oz Meter Dimensions: 9.0x5.0x2.4cm/3.5x2.0x0.9 inch S Dimensions: 10.5x3.0x2.2cm/4.1x1.2x0.9 inch Display format: 1. Power: 0-10KW Test Range, within 1KW, 0.0-999.9W; 1KW and above, 1000-9999W 2. Energy: 0-9999KWh Test Range, within 10KWh, 0-9999Wh; 10KWh and above, 10-9999KWh 3. Voltage: 6.5-100V, it shows 6.50-99.99V 4. Current: 0-100A, it shows 0.00-99.99A Colour: Black Material: LCD+PC Notices: 1. Wiring order cannot be wrong. 2. This meter is suitable for indoor use ONLY. 3. Applied load should not exceed the rated power or current. 4. "Zero current" and "All 888s display" are mostly caused by wrong wiring. 5. Need a pointing tool to press the function button to prevent acci touch. Package size: 11*3*3cm Package Contents: 1x DC Digital Multimeter 1x 100A Current S Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: 100% Brand new and high quality!! This meter provides Realtime readings of Voltage 0-60V, Current 0-150A, Power 0-6554W. This device accumulates Charge [Ah] Amphour and Energy [Wh] readings till it resets or shut off. This meter also captures and stores Peak Amps Ap, Peak Power Wp, Minimum Voltage Vm during the operation. Professional battery tester Great Performance and Precision Backlight Blue LCD Specifications: Operates from 4.8-60V Measures: 0-150A, resolution 0.01A; 0-60V, resolution 0.01V; 0-6554W, resolution 0.1W; 0-65Ah, resolution 0.001Ah; 0-6554Wh, resolution 0.1Wh. 16 x 2, backlit LCD display. Size: 85 x 42 x 25mm Material: Plastic & Electronics Color: Black Package includes: 1 x Power Ana

RC Watt Meter 100A Power Analyzer Digital LCD Balance Battery Voltage Checker Features： Digital LCD displays provide clear and clear readings. Intermittent processing of up to 100 amps of current and 50 amps of continuous service. Connecting the end of the charge to the battery provides real-time battery level readings. Drive from 0 to 60 volts. It is suitable for 12, 24, 36 and 48 volt battery systems. Rugged and durable, it can handle 50 A continuous and 100 A peak A 60V. Specifications： Color: Blue Voltage: (0)V-4V-60V 0.01V (Resolution). Current: 0-100 A peak 0.01A (Resolution). Power: 0-6554 W 0.1W (Resolution). Charge: 0-65 Ah 0.001Ah (Resolution). Energy: 0-6554 wh 0.1 Wh (Resolution). Measurement Update Period: 400mS. Signal Sampling Rate: sample/s. Data Queue Sequence time: 2 seconds. In Circuit Resistance: 0.001 Ohms. Operation Current: 7 mA. Auxiliary Power Voltage: 4.0V - 60V Size:8.2 * 5 * 2.3cm / 3.22 * 1.96 * 0.90in Weight：72g/2.53oz Package List： 1 * Watt Meter   #powermeter #wattmeter #rcwattmeter #Accessories #analyzer #digitalwattmeter #highprecision #Rchelic

Dimensions:89.6*49.6*24.3mm(L*W*H) Display Type:Digital Only Accuracy Class:1.0grade Operating Temperature:-10-60degree el Number:PZEM-022 DIY Supplies:Electrical Current range:0-100A Power:0-22000W Energy:0-9999.99kwh backlight:blue Voltage measuring range:80-260V Display:LCD Accessory:Split CT Colour:Black material:plastic Package Contents: 1* AC digital display 1* opening and closing CTOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

RC Watt Meter 100A Bộ phân tích năng lượng LCD Cân bằng kỹ thuật số Kiểm tra điện áp pin Đặc trưng: Màn hình LCD kỹ thuật số cung cấp các bài đọc rõ ràng và rõ ràng. Xử lý gián đoạn lên đến 100 amps hiện tại và 50 amps dịch vụ liên tục. Kết nối kết thúc sạc với pin cung cấp số đọc mức pin theo thời gian thực. Điện áp DC từ 0 đến 60 volt. Nó phù hợp cho các hệ thống pin 12, 24, 36 và 48 volt. Chắc chắn và bền, nó có thể xử lý 50 A liên tục và 100 A đỉnh A 60V. Thông số kỹ thuật Màu: xanh Điện áp: (0) V-4V-60V 0,01V (Độ phân giải). Hiện tại: 0-100 Một đỉnh 0,01A (Độ phân giải). Công suất: 0-6554 W 0.1W (Độ phân giải). Phí: 0-65 Ah 0,001Ah (Độ phân giải). Năng lượng: 0-6554 wh 0,1 Wh (Độ phân giải). Thời gian cập nhật đo lường: 400mS. Tốc độ lấy mẫu tín hiệu: mẫu / s. Thời gian xếp hàng dữ liệu: 2 giây. Trong điện trở mạch: 0,001 Ohms. Hoạt động hiện tại: 7 mA. Điện áp phụ: 4.0V - 60V Kích thước: 8.2 * 5 * 2.3cm / 3.22 * 1.96 * 0.90in Trọng lượng 72g / 2.53oz Danh sách gói Máy đo 1 * watt meter Sách hướng dẩn #wattmeter #dodongdc #testtai #thudungluong #donghodovon #dongho #donghodientu #diy #doche #12v KHI ĐẶT HÀNG, CẢM PHIỀN QUÝ KHÁCH ĐẶT ĐÚNG PHÂN LOẠI (NẾU CÓ) GIÚP SHO

<div><p>Plug: UK Plug/EU Plug/US Plug The Real Wattage Display (Watts) is 0~2900W Voltage Display Range: 0V~9999V Power Consumption of the Power Meter Monitor: 0.5W Price Display Range: 0.00COST-99.99COST/KWH Size: 15.5 * 7.3 * 7.5cm / 6.1 * 2.9 * 3inch Timing Display Range: 0 second~9999 days Color: White Package Included: 1* Power Consumption Meter Total KWh and Cost Display: 0.0-9999KWh, 0.0-9999COST Frequency Display: 0Hz~9999Hz Plug: UK Plug/EU Plug/US Plug Current Display (Amps): EU Plug: 0.000A~16.000A UK Plug: 0.000A~13.000A US Plug: 0.000A~15.000A Operating Voltage: EU Plug: 230V UK Plug: 230V US Plug: 120V Frequency Display: EU Plug: 50HZ UK Plug: 50HZ US Plug: 60HZ Operating Current: EU Plug: Max 16A UK Plug: Max 13A US Plug: Max 15A Wide Voltage Range: EU Plug: 230V-250V UK Plug: 230V-250V US Plug: 110V-130V Features: Large LCD display for easy reading. Measure Voltage, Frequency, Current, Power Factor, Wattage, minimum & maximum Wattage and record cumulative Kilowatt-hour KWh, Time, Date and Electricity Expenses. Seven display modes, transferred by pressing "FUNCTION" button. Overload warning displayed on LCD. Resetting for abnormal display or no-response of button. Built-in 3.6V rechargeable battery (NI-MH) to save electricity and saving setting. Easy electricity price setting. Easy to Monitor Your Electricity Bill: Electricity price setting by pressing OK, VALUE, DISPLAY and SET button Built-in Battery Backup: 2X1.5V rechargeable batteries allows meter to be moved and still visible without losing readings. Measure Various Parameters + Overload Protection Function: Power (W), Energy (kWh), Volts, Amps, Hertz, Power Factor and Maximum Power (W), Time, Days ( Your electricity bills are vitally based on kWh). Large & Clear LCD Display for Easy Reading.</p><

WattMeter thiết bị hiển thị 4 thông số Hỗ trợ điện áp DC 0-60v 150A. Lưu ý ko đc đấu lộn cực vào, và chập tải sẽ làm cháy thiết

Description: The large-screen 100A LCD Digital Voltage Watt Current Power Frequency Meter Ammeter Voltmeter can display power/ current/ voltage/ frequency/power factor/power consumption at the same time. Equipped with AC current transformer, donnot need to buy it separately. Features: 100% brand new and high quality The large-screen can display power/ current/ voltage/ frequency/power factor/power consumption at the same time Can measure voltage range of AC 110V-250V and maximal current of 20/100A Equipped with AC current transformer, donnot need to buy it separately With overload alarm function, reset energy function, power alarm threshold preset function, etc. The blue backlight can be turned on/off manually Store energy data when power off (can be reset to 0) Note: 1. This module is suitable for indoor, please do not use outdoor. 2. Applied load should not exceed the rated voltage, current. 3. Wiring order cannot be wrong. Specifications: Type: LCD Panel AC Power Meter with AC current transformer Maximum power: 22000W Maximum current: 20/100A Operating voltage: AC 110-250V Voltage accuracy: ±1% Power accuracy: ±2% Execution standard: JB/T9282-1999 Function: measure power/ current/ voltage/ frequency/power factor/power consumption Application range: all home electric appliances with voltage of 110V-250V Size: 90x54.5x28mm/3.54x2.15x1.1" Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x LCD Panel AC Power Meter with AC current transformer 1 x User M

Description: Digital LCD Screen Display: easy to read the LCD provides clear digital reading.And real-time reading: the wattmeter will continuously provide real-time reading of amperes, volts, and watts after connection.Provides 8 Electrical Readings: Current (A), Voltage (V), Watts (W), Amp-hours (Ah), Watt-hours (Wh), Peak Amps (Ap), Minimum Volts (Vm), Peak Watts (Wp).Perfect troubleshooting tool: it's indispensable for analyzing, testing and troubleshooting any DIY DC power project.Multi-functional tool: verify that there is sufficient working voltage under load.Prevent peak current from damaging batteries, ESC, motors, wiring and connectors.Verify correct battery charger operation (connect your battery and charger).Individual cells are balanced.Set the cut-off voltage and check the battery capacity. Detect the receiver and the actual operating current to determine whether UBEC, etc.Professional RC Watt Meter is an excellent addition to your RC hobby, DC circuits, Solar system, Boat/RV & Battery Backup systems. Specification: Material: PlasticSize: 84x43x26mm / 3.30x1.69x1.02inchOperates Voltage: 4.8V-60VMeasures:0-150A, resolution 0.01A;0-100A, resolution 0.01A;0-60V, resolution 0.01V;0-6554W, resolution 0.1W;0-65Ah,resolution 0.001An;0-6441Wh,resolution 0.1Wh; Package Includes: 1 Piece Watt Meter Power Analyzer Note: Please allow 1-3mm measuring deviation due to manual measurement.Due to the different monitor and light effect,the actual color of the item might be slightly different from the color showed on the pictures.Thank

7-IN-1 MULTIMETER --- This monitor measures and displays current (0-100A), voltage (0-90V), power, battery capacity, amp-hour, watt-hour and time simultaneously on its clear easy to read LCD color screen. WIDE APPLICATION --- The multifunctional detector can be used as battery charge-discharge tester, meter for automobile and car battery, battery capacity monitor for photovoltaic system, voltage meter, current meter, power meter, etc. And will be much more convenient with the extra 1 meter shielding wire. BIDIRECTIONAL AMMETER --- The multimeter can detect current in dual direction without changing the wiring direction when being used for monitoring charging or discharging. SAFER USE --- With various protections: over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc. It will be a safer tester for you to enjoy your work. OTHER FEATURES --- LCD color display; AH power off memorized function; Time & AH resettable; Calibration function; Automatically/manually switch off LCD screen; Connect the volt amp meter to a relay to use the output control button to enable/disable output. NOTE: This multimeter doesn't contain a relay. DROK DC Voltage Current Power Battery Capacity AH WH Time Multimeter Measuring Parameters: Voltage, current, power, battery capacity, amp-hour, watt-hour, time. Voltage Measurement Range: DC 0-90V Current Measurement Range: DC 0-100A Voltage Measurement Accuracy: ± 2% ± 5 digits Current Measurement Accuracy: ± 3% ± 5 digits Display Resolution: 0.1A, 0.01V,0.01AG, 0.01H(1 min) Measurement rate: 5 times/second Display: 1.8 inch LCD color screen Meter Overall Dimension: 79x43x26mm/3.11x1.69x1.02 inch Meter Opening Hole Size: 76.5x39.2mm/3.01x1.54 inch Hall Sensor Size: 57x32x50mm/2.24x1.26x1.97 inch (with screw and copper pillars) Hall Sensor Hole Diameter: 20mm/0.79 inch Protection Function: OVP (Over-voltage protection): 0.01V-90V OCP(Over-current protection): 0.1-100A OPP(Over-power protection): 0.01W-9.99KW LOP(Low-voltage protection): 0.01V-90V OAH(Over-charge protection): 0.01AH-9999AH OFT(Over-time protection): 1min-99hour59min Material:Metal + plastic colour:Black Package Contents: 1 set x Bidirectional Volt Amp Meter Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Good scenery is on the road.Easy-to-use DC power analyser 4 - 60V 0 - 100A for measuring power flow in a low voltage circuit such as the flow - in Watts - and the cumulative rate of flow - in Watt-hours - from a solar panel or a DC wind generator into a battery. Simple +positive/-negative (GND) two-wire input (Source) and two-wire output (Load) for series insertion into circuit. Two-line LCD - updated every 0.4 seconds - displays eight different values: Power 0 - 6554 Watts to 0.1W resolution Current 0 - 100 Amps (max) 50A continuous to 0.01A resolution Voltage 4 - 60 Volts to 0.01V resolution Power flow rate 0 - 6554 Watt-hours (Wh) to 0.1Wh resolution Current flow rate 0 - 65 Amp-hours (Ah) to 0.001Ah resolution Peak current in Amps Peak power in Watts Voltage minimum (dip) over monitoring period Low in-circuit resistance just 0.001 Ohms negligible 7mA circuit load. Dimensions 84 x 50 x 20mm (L x W x D) Included: 1 x Watt Meter 1 x instruc

220v 8 watt / meter super bright smd 5050 big eyes led strip tube light 5050 smd led light strip overview large eyes ,Bigger than any other type. Brighter emitting power per meter. There are 60pcs led smd big eyes. The flame is guaranteed super bright!! If Mr. needs 20m = click 2x If Mr. needs 30m = click 3x Usefulness: X room decoration lights X cafe lights, restaurants X tree lights Features With a warmwhite-colored led, it provides sufficient lighting and does not make the eyes weary because of its light. These led lights are suitable for lighting in the room or outdoors. Application is easy... Just plug connectors X recommended 20 meters maximum connector X led strip cut off by 1 meter Ac 220v voltage Color available: White, red, yellow (warm white), green, blue Note: Pay attention, please. - we 've ordered qc both quantity and quality, (Give an alternate color note, If it 's empty we' ll notify it through chat features and we 'll wait for a 1x24-hour response, No chat response. Then we 'll change color to a color similar to random.) - damage / loss of package in delivery beyond our responsibility (can claim directly to the chosen courier party) - wait for the next order invite friends and family yes! - thank you. ~ ~ > > > customer satisfaction is our primary goal < < < ~ ~ ~ ~ > > > > > thank you for your visit < < < < <

1 Control Fund.Press the key to turn the backlight on or off, the backlight has memory function, you can store the on or off state when it is turned off. 2 restart powerStep 1: press the key for 5 seconds until the energy value flashes and then release the key.Step 2: Press the key again to remove the power value and exit the intermittent reset state.Step 3: If the key is not activated within 5 seconds, it means that the energy value is not cleared and leaves the reset state. 3 Alarm threshold set.Step 1: Press and hold the key until the LCD SET screen sets CLr "and then release the key to enter the configuration status.Step 2: The power window shows the current power alarm value and the last digit starts to flash, then you can press more 1, when there is no operation for 3 seconds, the position of the digits will change automatically, the setting method It is the same as the previous one. Step 3: Once the configuration is finished, press the key for 5 seconds to automatically store and exit, the active power threshold range is 0.02222kw. 1. Operating voltage: 80 VAC 260VAC 2. Test voltage: 80 VAC 260VAC 3. Rated power: 100A / 22000W 4. Operating frequency: 45-65Hz 5. Accuracy of measurements: grade 1.0 A Function 1. Measurement function of electrical parameters (voltage, current, active power, energy, frequency, power factor) 2. Overload alarm function (supercharge alarm threshold, backlight and flashing alarm light). 3. Power alarm threshold preconfiguration function (power alarm threshold can be set). 4. The power can be restarted with the key. 5. Save the data when you are off. 6. Large LCD screen 7. Backlight function. B. Key appearance and function Me. Screen interface The screen interface is large screen LCD, it can display six parameters at the same time. precautions 1. This ule is suitable for indoor, do not use it outdoors. 2. The requested load must not exceed the rated power. 3. The wiring order cannot be wrong. colour:black Material:plastic size:89.6x49.6x24.3mm Package Contents: 1 x PZEM-022 AC Voltmeter Ammeter 1 x Coil CT Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#DC #7.5-100V #100A #10kW #Power #Energy #Meter #Wattmeter #Electrical #Panel #Gauge #Monitor #Digital #Display #Volt DC 7.5-100V 100A 10kW Power Energy Meter Wattmeter Electrical Panel Gauge Monitor Digital Display Volt kwh Watt Amp DC 7.5-100V 100A 10KW Power Energy Meter Wattmeter Electrical Panel Gauge Monitor Digital Display Volt kwh Watt Amp 4 in 1 Multi-funciton power monitor: Voltage measurement Current measurement Power measurement Energy statistics Features: Data is storaged when power off Low voltage / high voltage / electricity alarm function Backlight on/off function Electrical characteristics Working voltage: DC 7.5 -- 100V Operating current: less than 10mA Measuring Voltage: DC 7.50 -- 99.99V Measuring current: 0.00 - 99.99A Rated power: 100 A / 10 KW Measuring accuracy: 1.0S Operating temperature: -10℃ ~ 50℃ Energy statistics: 0-9999kWh Product size: 90*53*29mm Package included: 1 * Digital Voltage Ampere Energy Power Monitor 1 *

Description: This meter is really useful which can measure current, voltage, active power and energy with one instrument. With overload alarm function. You can preset power limit. Backlight and power will flash to give a warning when exceeding preset value. One button to operate. The button can be used to control backlight, reset energy, preset power alarm limit. Large LCD display with backlight, easy to read. Automatic storage data when power off. Specification: Power Test Range: 0-4.5kW Power Display: 0.0-999.9W(=1kW) Energy Test Range: 0-9999kWh Energy Display: 0-9999Wh(=10kWh) Voltage Test Range: 80-260V Voltage Display: 80-220V Current Test Range: 0-20A Current Display: 0.00-20.00A Working Voltage: AC80-260V Rated Power: 4500W/20A Working Frequency: 45-65Hz Package Includes: 1 x Multi-functional Me

SCM and so on, please prepare the fitable cable and write the program by yourself. the specification of the PZEM-004T AC communication ule, the ule is mainly used for measuring AC voltage, current, active power, frequency, power factor and active energy, the ule is without display function, the data is read through the TTL interface. PZEM-004T-10A: Measuring Range 10A (Built-in S) PZEM-004T-100A: Measuring Range 100A (external transformer) DIY Supplies: Electrical Measuring Energy Range: 100A/22000W Rated Voltage: 220V Power Supply: AC Display Type: Digital Only Output Voltage: 220V el Number: PZEM-004T Phase: Single Phase Operating Temperature: -10-60degree Accuracy Class: 1.0 Max Operating Current: 100A - 119A Accessory: Coil CT Communicate Port: TTL Current range: 0-100A Voltage range: 80-260V Power range: 0-22kw Power factor: 0-1 Frequency: 45-65Hz Protocol: bus Colour:Blue + Black Material:Plastic + Metal Package Contents: 1x 100A shell mainframe 1x closed CT 1x TTL to USB cableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: Made of flame retardant material, it is safe and durable to use. The large-screen can display voltage,current,power consumption,power,power factor,frequency at the same time. It can measure voltage range of A C 110V-250V and maximal current of 100A. Equipped with current transformer, do not need to buy it separately. The blue backlight can be turned on/off manually. With overload alarm function, reset energy function, power alarm threshold preset function, etc. The data of accumulated electric quantity can be reset to 0. The product can lift a alarm when the current power is less than the overload power. Specifications: Item type: Power Monitor Voltmeter Ammeter Maximum power: 22000W Maximum current: 100A Operating voltage: 110-250V Voltage accuracy: 1% Current accuracy: 2% Power accuracy: 2% Function: measure voltage/ current/ power consumption/ power/power factor/frequency Application range: all home electric appliances with voltage of 110V-250V Product size:85x47x28mm Package included: 1pc x Power Voltmeter Ammeter 1pc x Current Transformer Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement. Keys Operation: 1. Short press the button to turn on / off the backlight. 2. Long press for 3s to enter the overload power setting. 2.1 Enter the overload power settings, the factory default value is 4.4KW 2.2 The highest position flickers, short press button corresponds to the value plus 1, and long press for 2s is the shift, the settable maximum value is 99.9KW. 2.3 Without any keystrokes, it will exit after 5s and save data. 3. Long press 5s, system reset, accumulative power is cleared, overload power setting resets to default value. Attention: 1. The applied resistive load should not exceed the rated power of the product, or the product may be damaged, and cause a fire in severe cases. 2. The product is NOT waterproof, for indoor dry environment use only. And keep it away from spreading water when use in places like bathroom and kitchen. 3. Keep it out of the reach of children and away from fire. Do NOT insert foreign matter(except wires)into wiring holes. Please tighten the screws. 4. Do NOT unauthorizedly disassemble the product. Please get professional maintenance technicians or electricians when repairs are required. #Power #Monitor #Digital #Panel #LCD #Display #Watt #Meter #Voltmeter #Ammeter #Tester #Tools #Current #Multifunction #E

LCD Display Electricity Usage Power Meter Socket Energy Watt Volt Amps Wattage KWH Consumption Analyzer Monitor Outlet--with Backlight AC110V~130V US Plug This power meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and  the cost of the electricity consumed, helping users to track their electric consumption and reduce the power bill and carbon emissions. Features: Great for Energy Consumption Monitor: used to measure the power consumption, current, voltage, power and cost of the connected appliance, helping save energy and money. 7 Display Modes: it can display time, watt, cost, cumulative electrical quantity, voltage, frequency, current, power factor, minimum power, maximum power, price. Large LCD display: easy and clear to read. No backlight / With backlight optional. Electricity Price Setting: you can set the electricity price according to the actual condition in 00.00 COST/KWh~99.99 COST/KWh. Overload Setting: when current load power goes beyond the max. load power, the letters "OVERLOAD" on LCD will keep blinking to remind you. Reset Function: it allows resetting for abnormal display or no-response of button. Built-in Battery: built-in a rechargeable battery to store electricity and save memory setting when power failures. Specifications: Material: PC Plug Type: UK LCD Type: With Backlight / No Backlight (Optional) Working Voltage: 230V~250V(UK) Timing Display Range: 0 second~9999 days Wattage Display(watts): 0W~2900W Voltage Display Range: 0V~9999V Frequency Display: 0Hz~9999Hz Minimum/Maximum Wattage Display Range: 0.0W~9999W Price Display Range: 0.00€/KWH~99.99€/KWH Total KWh & Cost Display: 0.000KWH~9999KWH, 0.00€~9999€ For EU Plug Technical Parameters: Operating Voltage: 230V, 50Hz Operating Current: Max. 16A Current Display(amps): 0.000A~16.000A For US Plug Technical Parameters: Operating Voltage: 120V, 60Hz Operating Current: Max. 15A Current Display(amps): 0.000A~15.000A For UK Plug Technical Parameters: Operating Voltage: 230V, 50Hz Operating Current: Max. 13A Current Display(amps): 0.000A~13.000A Battery: built-in a 3.6V 20mAh rechargeable NI-MI battery(included) Item Size(without plug): 6.8 * 4 * 14cm / 2.7 * 1.6 * 5.5in (L * W * H) Item Weight: 186g / 6.6oz Package Size: 15 * 8 * 7.2cm / 5.9 * 3.1 * 2.8in Package Weight: 215g / 7.6oz Package List: 1 * Power Meter 1 * User Manual(Eng

4-in-1 DC Multimeter: with 1.0 grade measuring accuracy, it combines Voltage, Current, Power and Energy measurement in one combo, super compact and lightweight that can be portable and easily used. Unique Voltage Alarm Function: the backlight and voltage value will flash simultaneously if the testing voltage is beyond alarm threshold (6-90V factory alarm value), and it can be set if needed Data Storage Design: it is designed to automatically storage the last testing data when suddenly powered off and the energy value can be reset by a short press after long pressing the function button for seconds Super Large Digital Display: 51x30mm easy reading LCD screen, clearly displays all testing figures at the same time, while the recessed button used to control the backlight, reset energy value, set voltage alarm threshold and choose measuring range Bonus Current S: it comes with a 100A/75mV current s, suitable for large range measurement, no need to waste extra money to get another one. 4-in-1 DC Multimeter is able to measure voltage, current, power and energy of most electrical devices (100A max.), which features high accuracy, low power consumption and easy reading large display. It also functions beyond voltage alarm, energy value reset, data storage, backlight control and measuring range option, suitable used for RV battery, voltage regulator, device detection and replacing various pointer-type electric meters. Specification Working Voltage: 6.5-100V/DC Power Rating: 100A/10000W Measuring Accuracy: 1.0 grade Power Consumption: 0.2W Measuring Speed: 2 times/s Net Weight: 190g/0.42lb/6.70oz Meter Dimensions: 9.0x5.0x2.4cm/3.5x2.0x0.9 inch S Dimensions: 10.5x3.0x2.2cm/4.1x1.2x0.9 inch Display format: 1. Power: 0-10KW Test Range, within 1KW, 0.0-999.9W; 1KW and above, 1000-9999W 2. Energy: 0-9999KWh Test Range, within 10KWh, 0-9999Wh; 10KWh and above, 10-9999KWh 3. Voltage: 6.5-100V, it shows 6.50-99.99V 4. Current: 0-100A, it shows 0.00-99.99A Colour: Black Material: LCD+PC Notices: 1. Wiring order cannot be wrong. 2. This meter is suitable for indoor use ONLY. 3. Applied load should not exceed the rated power or current. 4. "Zero current" and "All 888s display" are mostly caused by wrong wiring. 5. Need a pointing tool to press the function button to prevent acci touch. Package size: 11*3*3cm Package Contents: 1x DC Digital Multimeter 1x 100A Current S Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: LCD display for easy data reading. Measurement data: power, voltage, current. Easy to use, just plug this device into a wall outlet. Can calculate electricity bills and reduce unnecessary energy waste. Specifications: Material: ABS Model: EU Plug Measuring current range: 16A/3680W Working temperature: -25~45°C Dimensions: 160x80x80mm/4.80*2.40*2.40" Measuring voltage: EU Plug: 230-250V Maximum current: 16A Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item.Thanks for your understanding. Included: 1 X Power Meter 1 X Instruction Ma

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Máy Phân Tích Năng Lượng Pin Cân Bằng Điện Áp DC 60V 100A Watt Meter Checke (Màu Xanh Dương) Đặc điểm nổi bật: 1. Màn hình LCD kỹ thuật số cho phép đọc số rõ nét . 2. Hoạt động ngắt quãng lên đến 100 ampe và hoạt động liên tục ở 50 ampe. 3. Kết nối tải với pin để cung cấp các chỉ số sạc pin theo thời gian thực. 4. Xử lý 0 đến 60 vôn. Thích hợp cho các hệ thống pin 12, 24, 36 và 48 vôn 5. Mức tiêu thụ điện năng rất thấp là 7 mA, hiệu quả hơn bất kỳ công cụ nào khác. 6. Đo năng lượng (wh), điện tích (ah), công suất (w), dòng điện (A) và điện áp (V). 7. Phân giải chính xác dòng điện 0,01 A và điện áp 0,01 V. 8. Đo dòng điện tối đa, công suất tối đa (trừ Doc Wattson) và điện áp tối thiểu (độ võng). 9. Xử lý 50A liên tục và 100 A tối đa ở 60V. 10. Điện trở cảm nhận dòng Alu-Chrom chính xác với điện trở chỉ 0,001 ôm và mạch chỉ tiêu thụ 7 mA. 11. Sử dụng DSP để tăng độ phân giải ADC và bộ khuếch đại đo vi sai để cải thiện khả năng chống nhiễu. Thông tin sản phẩm: Màu sắc: màu xanh dương Điện áp: (0) V-60V 0.01V Dòng điện: 0-100 A tối đa 0,01A (độ phân giải) Công suất: 0-6554 W 0,1W (độ phân giải) Sạc: 0-65 Ah 0,001Ah (độ phân giải) Năng lượng: 0-6554 wh 0,1 Wh (độ phân giải) Chu kỳ cập nhật đo lường: 400mS Tốc độ lấy mẫu tín hiệu: mẫu / giây Thời gian trình tự hàng đợi dữ liệu: 2 giây Điện trở mạch: 0,001 ohms Dòng điện hiện tại: 7 mA Kích thướ bao bì sản phẩm: 117 * 75 * 35mm / 4,61 * 2,95 * 1,37 '' Gói hàng bao gồm: 1 x Máy phân tích 1 x Hướng dẫn sử

★★★★ S dc watt meter 150a 60v lcd power analyzer rc backlight Range of measurements: 8.5cm x 4.2cm x 2.5cm Before making the reservation, please read it f

★★★★ Dc watt meter 150a 60v lcd power analyzer rc backlight Range of measurements: 8.5cm x 4.2cm x

SCM and so on, please prepare the fitable cable and write the program by yourself. the specification of the PZEM-004T AC communication ule, the ule is mainly used for measuring AC voltage, current, active power, frequency, power factor and active energy, the ule is without display function, the data is read through the TTL interface. PZEM-004T-10A: Measuring Range 10A (Built-in S) PZEM-004T-100A: Measuring Range 100A (external transformer) DIY Supplies: Electrical Measuring Energy Range: 100A/22000W Rated Voltage: 220V Power Supply: AC Display Type: Digital Only Output Voltage: 220V Dimensions: 7.8cm*3.7cm el Number: PZEM-004T Phase: Single Phase Operating Temperature: -10-60degree Accuracy Class: 1.0 Max Operating Current: 100A - 119A Accessory: Coil CT Communicate Port: TTL Current range: 0-100A Voltage range: 80-260V Power range: 0-22kw Power factor: 0-1 Frequency: 45-65Hz Protocol: bus colour:Blue + black Material:plastic Package Contents: 1 * PZEM-004T AC Voltmeter Ammeter with outcase 1 * Coil CTOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#20A #DC #7.5-100V #Digital #LCD #Voltmeter #Ammeter #Wattmeter #Power #Energy #Meter #Volt #kwh #Watt #Amp 20A DC 7.5-100V Digital LCD Voltmeter Ammeter Wattmeter Power Energy Meter Volt kwh Watt Amp DC 7.5-100V 20A 2000W Power Energy Meter Wattmeter Electrical Panel Gauge Monitor Digital Display Volt kwh Watt Amp 4 in 1 Multi-funciton power monitor: Voltage measurement Current measurement Power measurement Energy statistics Features: Data is storaged when power off Low voltage / high voltage / electricity alarm function Backlight on/off function Electrical characteristics Working voltage: DC 7.5 -- 100V Operating current: less than 10mA Measuring Voltage: DC 7.50 -- 99.99V Measuring current: 0.00 - 20.00A Rated power: 20 A / 2000W Measuring accuracy: 0.5S Operating temperature: -10℃ ~ 50℃ Energy statistics: 0-9999kWh Product size: 90*53*29mm Package included: 1 * Digital Voltage Ampere Energy Power Mo

Features: Made of flame retardant material, it is safe and durable to use. The large-screen can display voltage,current,power consumption,power,power factor,frequency at the same time. It can measure voltage range of A C 110V-250V and maximal current of 100A. Equipped with current transformer, do not need to buy it separately. The blue backlight can be turned on/off manually. With overload alarm function, reset energy function, power alarm threshold preset function, etc. The data of accumulated electric quantity can be reset to 0. The product can lift a alarm when the current power is less than the overload power. Specifications: Item type: Power Monitor Voltmeter Ammeter Maximum power: 22000W Maximum current: 100A Operating voltage: 110-250V Voltage accuracy: 1% Current accuracy: 2% Power accuracy: 2% Function: measure voltage/ current/ power consumption/ power/power factor/frequency Application range: all home electric appliances with voltage of 110V-250V Product size:85x47x28mm Package included: 1pc x Power Voltmeter Ammeter 1pc x Current Transformer Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement. Keys Operation: 1. Short press the button to turn on / off the backlight. 2. Long press for 3s to enter the overload power setting. 2.1 Enter the overload power settings, the factory default value is 4.4KW 2.2 The highest position flickers, short press button corresponds to the value plus 1, and long press for 2s is the shift, the settable maximum value is 99.9KW. 2.3 Without any keystrokes, it will exit after 5s and save data. 3. Long press 5s, system reset, accumulative power is cleared, overload power setting resets to default value. Attention: 1. The applied resistive load should not exceed the rated power of the product, or the product may be damaged, and cause a fire in severe cases. 2. The product is NOT waterproof, for indoor dry environment use only. And keep it away from spreading water when use in places like bathroom and kitchen. 3. Keep it out of the reach of children and away from fire. Do NOT insert foreign matter(except wires)into wiring holes. Please tighten the screws. 4. Do NOT unauthorizedly disassemble the product. Please get professional maintenance technicians or electricians when repairs are required. #Power #Monitor #Digital #Panel #LCD #Display #Watt #Meter #Voltmeter #Ammeter #Tester #Tools #Current #Multifunction #E

Function and specification Available as 35mm DIN standard rail mounted, conforming to Standards DIN EN 50022. Single pole width (ulus 18mm), complying with Standards DIN43880. Standard configuration 5+1 backlight LCD display (99999.9kWh). Bicolor LED instructions power supply state (green) and signal of energy impulse (red). Automatic detection the direction of the flow of load current. And Instructions on LED (when display HELP 1 on LCD, that means the reverse of the flow of load current). And instructions (Only red energy impulse signal when working,If no green instructions power supply, that is meaning the direction of the flow of load current reverse)(DDM18S). Directly type S connection. Extension terminals cover, in order to protect to use safety. Specification: color: White material: plastic Condition: 100% Brand New el: DDM18SC Accuracy: Level 1 Reference Voltage: 220V, 50Hz Current Specifications:5(32)A Starting Current: 0.02A Insulation Performance: AC Voltage 4KV, 1 minute, 1.2/50us waveform impulse voltage 6KV Display e: LCD (5+1) Display Installation Method: Rail Installation Weight: Approx. 94g / 3.3oz Package Contents: 1 * DDM18SC Energy Meter 2 * Shell Accessories 1 * InstructionOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

100% Brand New and High Quality! 1. 35mm DIN Rail mounting meets the standards of DIN EN50022. 2. 17.5mm pole width meets the standards of DIN43880. 3. LCD backlight digital display, no reset button, to avoid human manipulation with the data. 4. It displays electricity, voltage, current, frequency and power. 5. Red LED energy pulse signal. 6. Embedded end cover, ensuring power supply safety. 7. With the features of good reliability, small size, light weight, beautiful appearance and easy installation. 8. Adopt microelectronics and digital processing technology to measure electric energy, accurate and reliable. 9. Large scale integrated circuits and precision SMT technology, with good electromagnetic interference resistance and stable performance. Material:ABS colour:white Package Contents: 1 * Energy Meter 1 * User ManualOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1