Nguyễn Bảo Lan Phương
Nguyễn Bảo Lan Phương Top Writer Icon
Cập nhật: 02/12/2021
HIWARE Lobster Crackers and Picks Set Cover
TOP 1
MẠCH SẠC VÀ BẢO VỆ PIN 12V 3S Cho Pin Lipo 3.7v 100A
ftb score rating icon 10
FTB Score
HIWARE Lobster Crackers and Picks Set Cover
TOP 2
Bộ Kiểm Tra Dung Lượng Pin 12v Cho Pin Lithium Lipo / Liion
ftb score rating icon 10
FTB Score
HIWARE Lobster Crackers and Picks Set Cover
TOP 3
Bình Pin Lithium 12v 30Ah và 60Ah, Pin sạc Lipo mạch bảo vệ BMS 4S 30Ah và 60Ah
ftb score rating icon 9.8
FTB Score

Top 30 pin lipo 12v

MẠCH SẠC VÀ BẢO VỆ PIN 12V 3S Cho Pin Lipo 3.7v 100A

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Mạch bảo vệ và sạc cell Li-ion, chuyên dùng cho pin máy khoan, bắt vít, máy cưa và thiết bị dùng pin 9.6V 10.8V 11.1V 12V có dòng tải lớn (máy cưa) Mạch Sạc Và Bảo Vệ Pin 12V 3S 100A dùng cho các loại pin ghép lithium bảo vệ pin quá dòng, bảo vệ pin khi sạc giúp ổn định pin tránh hư khi dùng hoặc sạc. Mạch được ghép trực tiếp với pin sạc 18650 với cấu trúc 3 Cell 3.7v, dùng ghép các loại pin sạc 12V, dùng sạc các loại pin cho máy khoan, máy bơm, pin ghép 12V, pin thiết bị điện tử 12V, các loại pin sạc 12V. Thông số kỹ thuật: Thông số mạch: - Điện thế xả cạn: 9.6V - Điện thế sạc đầy: 12.6V - Dòng xả liên tục (hoạt động): 100A. Điện trở: ít hơn 300mΩ Bảo vệ chống ngắn mạch: bảo vệ, chậm tự hồi phục. - Chức năng: Sạc cân bằng và bảo vệ cell Li-ion, dùng trong pin máy khoan, máy bắt vít, máy cưa,... có mức điện thế từ 9.6V 10.8V 11.1V 12V. - Đặc biệt: Mạch có dòng tải lớn, rất thích hợp máy cưa hoặc máy khoan - Khối lượng: 55g Khuyến nghị: - Nếu đóng 3 cell nối tiếp thì nên chọn cell có dòng xả từ 15C - 20C. - Nếu đóng 3 cặp cell nối tiếp (6 cell) thì nên chọn cell có dòng xả từ 10C - 15C. - Tuy nhiên nếu chỉ dùng cho máy bắt vít hoặc khoan có công suất nhỏ thì có thể chọn cell có dòng xả 5C - 10C thay thế. - Các cell (cặp cell) phải đều volt với nhau trước khi lắp vào mạch. - Hàn theo thứ tự từ B- (0V) B1(3.7V) B2 (7.4V) và B+ (11.1V). - Hai chân P- và P+ trên mạch là hai ngỏ ra Tải (và cũng là hai ngõ Sạc vào) #machsac #machbaove #machsacpincell #pincelllion #mach3s #pinmaykhoan #machsacpingheplit
Xem thêm

Bộ Kiểm Tra Dung Lượng Pin 12v Cho Pin Lithium Lipo / Liion

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Description: maximum input voltage: 1.5 times the nominal voltage work current:< 6-8mA (with backlight) save electricity current:< 0.5-1.0mA Backlit out using temperature range: -0- 40℃ maximum power dissipation: 1.0W For 12V Lead Acid Batteries/12V Lithium Batteries Black wire connect negative electrode Red wire connect positive Package included: 1x Battery indicator Battery capacity Tester for 12V Lead Acid Batteries/Lithium Batt
Xem thêm

Bình Pin Lithium 12v 30Ah và 60Ah, Pin sạc Lipo mạch bảo vệ BMS 4S 30Ah và 60Ah

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 9.8

Mô tả

Bình Pin Lithium 12v 30Ah, Pin sạc Lipo, mạch bảo vệ BMS 4S 40Ah Vol ra 12V - Màn hình hiển thị thông tin (Vol) - 2 Cổng sạc USB 5V (max 2,5A) sặc điện thoại Kích thước khối: Dài 330 x 240 x H50mm, - Cân nặng: 3kg Nên sử dụng đúng bộ sạc của pin lithium, không sạc và xả quá mức, sử dụng dòng xạc cao hơn pin sẽ dễ hỏng. Sử dụng thay cho ắc quy 12v, dùng cho kích điện, lưu cho pin năng lượng mặt trời, kích điện cá, dùng như 1 ắc quy dự phòng cho ô tô trong trường hợp bình ô tô đã yếu... Mạch bảo vệ BMS pin 4S sử dụng 8 mosfet bảo vệ 40a 12,4/14,8v Bảo vệ ngắt sạc vol cao : 14,6V Bảo vệ ngắt sạc vol thấp: 9,4V Dòng xả liên tục 20A, Cổng B- là cực âm tới cell pin chung P- cổng nạp và cổng xả rất tiện lợi Dòng xả Max 40A Dòng bảo vệ 60A Xả cân bằng giữa các cell Bình Pin Lithium 12v 60Ah, Pin sạc Lipo, mạch bảo vệ BMS 4S 60Ah Vol ra 12V - Đèn led - Màn hình hiển thị thông tin (Vol) - 2 Cổng sạc USB 5V (max 2,5A) sặc điện thoại Kích thước khối: Dài 305 x 235 x H70mm, - Cân nặng: 5kg Nên sử dụng đúng bộ sạc của pin lithium, không sạc và xả quá mức, sử dụng dòng xạc cao hơn pin sẽ dễ hỏng. Sử dụng thay cho ắc quy 12v, dùng cho kích điện, lưu cho pin năng lượng mặt trời, kích điện cá, dùng như 1 ắc quy dự phòng cho ô tô trong trường hợp bình ô tô đã yếu... Mạch bảo vệ BMS pin 4S sử dụng 12 mosfet bảo vệ 60a 12,4/14,8v Bảo vệ ngắt sạc vol cao : 14,6V Bảo vệ ngắt sạc vol thấp: 9,4V Dòng xả liên tục 20A, Cổng B- là cực âm tới cell pin chung P- cổng nạp và cổng xả rất tiện lợi Dòng xả Max 60A Dòng bảo vệ 60A Xả cân bằng giữa các
Xem thêm

Pin Lipo Dc 12v 20000mah Siêu Bền

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Durable DC 12V 20000mAh Battery Polymer Battery Street Light Instrument Light Features: Small size, no space, easy to carry. Short circuit, leakage protection, safety, no worries. Super large capacity, durable for long time use. You can use this battery to use our powerful wireless transmitter, CCTV camera and so on. Specifications: Color: Blue Size:153*74*36mm Capacity: 20000mAh Battery type: Rechargeable Li-on Battery Socket Type:EU,US Package Included: 1 x Battery 1 x Charger Notes: 1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Th
Xem thêm

Bình Pin Lithium 12v 30Ah, Pin sạc Lipo, mạch bảo vệ BMS 4S 40Ah, + kèm bộ sạc 14,6v 5A

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Bình Pin Lithium 12v 30Ah, Pin sạc Lipo, mạch bảo vệ BMS 4S 40Ah Vol ra 12V - Màn hình hiển thị thông tin (Vol) - 2 Cổng sạc USB 5V (max 2,5A) sặc điện thoại Kích thước khối: Dài 330 x 240 x H50mm, - Cân nặng: 3kg Nên sử dụng đúng bộ sạc của pin lithium, không sạc và xả quá mức, sử dụng dòng xạc cao hơn pin sẽ dễ hỏng. Sử dụng thay cho ắc quy 12v, dùng cho kích điện, lưu cho pin năng lượng mặt trời, kích điện cá, dùng như 1 ắc quy dự phòng cho ô tô trong trường hợp bình ô tô đã yếu... Mạch bảo vệ BMS pin 4S sử dụng 8 mosfet bảo vệ 40a 12,4/14,8v Bảo vệ ngắt sạc vol cao : 14,6V Bảo vệ ngắt sạc vol thấp: 9,4V Dòng xả liên tục 20A, Cổng B- là cực âm tới cell pin chung P- cổng nạp và cổng xả rất tiện lợi Dòng xả Max 40A Dòng bảo vệ 60A Xả cân bằng giữa các cell Bình Pin Lithium 12v 30Ah, Pin sạc Lipo, mạch bảo vệ BMS 4S 40Ah, + kèm bộ sạc 14,6v 5A Vol ra 12V - Màn hình hiển thị thông tin (Vol) - 2 Cổng sạc USB 5V (max 2,5A) sặc điện thoại Kích thước khối: Dài 330 x 240 x H50mm, - Cân nặng: 3kg - Bộ Sạc 14,6v 5A Nên sử dụng đúng bộ sạc của pin lithium, không sạc và xả quá mức, sử dụng dòng xạc cao hơn pin sẽ dễ hỏng. Sử dụng thay cho ắc quy 12v, dùng cho kích điện, lưu cho pin năng lượng mặt trời, kích điện cá, dùng như 1 ắc quy dự phòng cho ô tô trong trường hợp bình ô tô đã yếu... Mạch bảo vệ BMS pin 4S sử dụng 8 mosfet bảo vệ 40a 12,4/14,8v Bảo vệ ngắt sạc vol cao : 14,6V Bảo vệ ngắt sạc vol thấp: 9,4V Dòng xả liên tục 20A, Cổng B- là cực âm tới cell pin chung P- cổng nạp và cổng xả rất tiện lợi Dòng xả Max 40A Dòng bảo vệ 60A Xả cân bằng giữa các
Xem thêm

Bộ Sạc Pin Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to my store - Calmconstant.Enjoy your shopping time,have a nice day! Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Máy hàn điểm di động nguồn 12V hoặc dùng nguồn Pin LIPO 4S-100C

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Thông số kỹ thuật: -Có thể hàn 18650/26650/32650 Pin Lipo, nó là di động, ổn định và đáng tin cậy -Hệ thống Điện áp: 12V-14.6V -Làm việc hiện tại: 90-150A -Đề nghị Pin: 1. 20-45ah Lead-acid pin với hiệu suất tốt và nhỏ bên trong chống dính 2. 3.5-5.5ah 45C 3S aeromodel lithium pin 3. 30-35ah dung tích 18650 pin -Mạch này với pin 12V sẽ trở thành một lưu trữ năng lượng tại chỗ Máy hàn cho hàn Niken miếng như pin lithium và Niken crom pin. Theo cấu hình khác nhau, độ dày có thể khoảng 0.1MM-0.15mm LƯU Ý: Nếu pin khá tốt và điện trở Nội là rất thấp, và sau đó có thể có dòng điện lớn quá tải. Nếu bạn không chắc chắn về pin của bạn, tốt hơn để nối dài dây vào khoảng 1 mét với 2.5 ² hoặc 4 ² dây, sau đó nó sẽ làm giảm nguy cơ của ống điện cháy. Bộ sản phẩm Bao Gồm: 1 x Mạch Chính 1 x Còi 2 x Dây Đầu Vào 2X dây đầ
Xem thêm

Pin 3S -12V Li-ion 18650 dung lượng (6000mAh), Pin mới 100%

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

- Khối pin được đóng từ pin mới 100%. - khối pin có dung lượng 2000mAh hoặc 4000mAh. Tuỳ nhu cầu sử dụng. - Thích hợp cho việc làm nguồn dự phòng 12v, nguồn cho loa Bluetooh, đèn Led, moden, wifi, quạt ........ - Khối pin được lắp mạch bảo vệ pin 3S nên hoàn toàn yên tâm khi sử dụng. Khi pin yếu mạch tự động ngắt để bảo vệ pin. - Khối pin hoàn chỉnh được bọc co nhiệt tránh gây chạm , chập khi sử dụng. - Không dùng cho máy khoan , bắn vít vì pin không phải loại pin dòng xả cao. - Cần tư vấn lh: 09785
Xem thêm

【Tastetagr】USB lithium lipo 18650 battery charger 3.7V 4.2V to 5V 9V 12V 24V step up module

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to 【Tastetagr Store】 ,We insist on the lowest price to sell the best quality items!!!Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Mô Đun Sạc Pin Lipo 12v 10a Xi

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

_______♤Welcome Iuxishop Store♤___________ ✔Ready Stock ✔COD ✔Quality Checked ✔Whole Items: Good Quality/Ready Stock/Original/Wholesale Price ✔Shipping Time: 5-14 usually 8 days from China ★Surprises for you★ ☛Free Gifts:Follow Shop ❤“Like” 5 Items: Priority Shipping ⚠️( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug) 【After-sale】: If there are any problem, please contact us firstly, we will try our best to solve it. __________________❀Product Information❀__________________ Features: This is a under-voltage switch module used to turn off the power of resistive load in the event of the voltage dropping below a definite value(set under-voltage). If the voltage rises back in 6 seconds, the module will keep load turning on. When the battery voltage increases to a certain value(set over-voltage), the module will automatically turn on load again. Designed with a LED indicator to show if load is cut off or turned on. Both under-voltage cut-off value and over-voltage turn-on value can be adjusted by simply pressing buttons. Specifications: Input Voltage: DC12V Max. Current: 10A Size: 50*48*20mm/1.96*1.89*0.78" Instruction: Load cut off and turn on: For 12V storage battery, set under-voltage (load cut off voltage) as 10.5V, when the battery voltage drops to 10.5V or lower, controller will delay 6 seconds then cut off load. If voltage increases in the delayed 6 seconds, load will keep turning on. Voltage setting: Under the value setting condition as display flashes, press start button to increase voltage, and stop button to reduce voltage. Start button function(setting under-voltage for cutting off load): Under normal voltage display condition, press start button to display under-voltage value. Press and hold start button till display flashes, then press start or stop button to set under-voltage value. Stop button function(setting over-voltage for turning on load): Under normal voltage display condition, press stop button to display over-voltage value. Press and hold stop button till display flashes, then press start or stop button to set over-voltage value. Restore to factory settings: Press and hold start and stop button together till it displays 888 to restore factory settings. Note: When setting, if start voltage cannot be adjusted, you can adjust stop voltage first. This is not a circuit problem or program fault. Package Includes: 1 x Protection Bo
Xem thêm

Pin 3S - 12V dung lượng lớn (10000mAh) cho Quạt, Loa , Đèn.

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 9.8

Mô tả

- Khối pin được đóng từ các Cell pin 26650 mới 100%. - Dung lượng mỗi Cell pin khi test thực tế đạt 5100-5200mAh. - Bên trong khối pin có mạch bảo vệ pin 3S-20A tránh gây hỏng pin trong quá trình sử dụng.Mạch tự động ngắt khi hết pin.Dòng xả của khối pin là 6c ~ 12A. - Thích hợp cho việc làm nguồn dự phòng 12v, nguồn cho loa, đèn Led, moden, wifi, quạt ........ Cần tư vấn lh: 097857
Xem thêm

Bộ Sạc Pin Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to thevatipoem.vn shop, there is a new shopping experience every day! Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Bộ Sạc Pin Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to the shop #keifany.vn Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Hộp Đựng Pin Lipo - Lithium 18650 Chế Ắc Quy Xe Điện 12v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

HỘP ĐỰNG PIN LIPO - LITHIUM 18650 CHẾ ACQUY XE ĐIỆN 12V chuyên dùng thay thế sửa chữa ắc quy cho xe điện. Hộp nhựa với chất liệu nhựa chất lượng cao, chịu lực tốt, có thể tái sử dụng nhiều lần Hộp nhựa kích thước lớn, có thể chứa tối đa 21 cell pin 18650 dùng chế bình ắc quy dung lượng cao cho các loại xe điện dùng nguồ
Xem thêm

Bo Mạch Bảo Vệ 3s 6a Li-ion 12v 18650 Bms Pcm Cho Li-ion Lipo

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

3S 6A Li-ion 12V 18650 BMS PCM protection board bms pcm for li-ion lipo cell pack Product parameters Charging Voltage: 12.6V-13V Overcharge Voltage Range: 4.25V-4.35V ± 0.05V Overpressure Voltage Range: 2.3V-3.0V ± 0.05V Upper Limit Operating Current: 5A-6A Upper Limit Instantaneous Current: 8A Quiescent Current: less than 30uA Internal Resistance: less than 45mohm Effective Life: more than 50,000 hours Operating Temperature: -40- +50 degrees Storage Conditions: -40- +80 degrees Size: 50 * 16 * 1mm Short Circuit Protection: protection, delay self-rec
Xem thêm

Máy Kiểm Tra Pin Lipo 12v 1 / 2 / 3 / 4 / 5 / 6 / 7s 18650

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Dear,Welcome to fitowfree! Product Description: 100% Brand new and high quality 18650 Li-ion Lithium Battery Level Indicator Li-ion Battery Level Display Parameter: (2% error should be acceptable) Battery voltage > N*3.2V, 1 LED lights up (note:N = battery cell number) Battery voltage > N*3.4V, 2 LED lights up Battery voltage > N*3.6V, 3 LED lights up Battery voltage > N*3.8V, 4 LED lights up 3.7V lithium battery,full charge 4.2V 2S lithium 7.4V battery , full charge 8.4V 3S lithium 12V battery , full charge 12.6V 4S lithium battery , full charge 16.8V 5S lithium battery, full charge 21V 6S Lithium battery ,full charge 25.2V 7S Lithium battery , full charge 29.4V 12V lead acid storage battery , 12V car battery Size: 40x 15x 2.5mm (L*W*H) Cable Length: 150MM Ultra thin power display, 5 LED indicators, display more intuitive, more beautiful. More widely used, lithium battery, lead-acid battery, lithium iron phosphate, electric vehicle battery, electric equipment can be used Installation: 1. Connect the positive and negative terminals of the display board to the positive and negative ends of the tested battery, press the red button gently with your finger, and the IED lamp lights up to display the real-time battery power 2. Release the finger, the LED lights will go out after 3-10 seconds delay, and there is no power consumption in static state. 3. With reverse connection function, even if the positive and negative connection is reversed, it can be adjusted Package includes:1Pc 18650 Li-ion Lithium Battery Level Indicator Thank
Xem thêm

mạch hàn cell pin di động 12V -14.8V dung lipo xả 100C

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 8.4

Mô tả

Thông số kỹ thuật: -Có thể hàn 18650/26650/32650 Pin Lipo, nó là di động, ổn định và đáng tin cậy -Hệ thống Điện áp: 12V-14.6V -Làm việc hiện tại: 90-150A -Đề nghị Pin: 1. 20-45ah Lead-acid pin với hiệu suất tốt và nhỏ bên trong chống dính 2. 3.5-5.5ah 45C 3S aeromodel lithium pin 3. 30-35ah dung tích 18650 pin -Mạch này với pin 12V sẽ trở thành một lưu trữ năng lượng tại chỗ Máy hàn cho hàn Niken miếng như pin lithium và Niken crom pin. Theo cấu hình khác nhau, độ dày có thể khoảng 0.1MM-0.15mm LƯU Ý: Nếu pin khá tốt và điện trở Nội là rất thấp, và sau đó có thể có dòng điện lớn quá tải. Nếu bạn không chắc chắn về pin của bạn, tốt hơn để nối dài dây vào khoảng 1 mét với 2.5 ² hoặc 4 ² dây, sau đó nó sẽ làm giảm nguy cơ của ống điện cháy. Bộ sản phẩm Bao Gồm: 1 x Mạch Chính 1 x Còi 2 x Dây Đầu Vào 2X dây đầ
Xem thêm

Mô Đun Hiển Thị Dung Lượng Pin Lipo Li-Ion 3s 11.1v 12v 12.6v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Condition: New Type: Voltage regulator Input voltage range: 9-26 V colour: Photo Color Material: PC+ metal size: 29 * 15 * 3mm Package Contents: 1*Battery Capacity Indicator ModuleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Xem thêm

TST Súng Bắn Keo Nến Jack XT60 Dùng Pin Lipo 3S 12V Keo Phi 7mm

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Thông số kĩ thuật: - Điện áp hoạt động: Pin lipo 3S 12V - Thời gian làm nóng: 5 - 7 phút - Màu sắc: xanh lam - Chất liệu: thân bằng nhựa, đầu xịt keo bằng kim loại - Kích thước sản phẩm: 11 x 11 x 2.7 cm - Trọng lượng: 110g Đặc tính sản phẩm: - Súng bắn keo hay glue gun 12V 30W với Jack XT60 đực cắm cho các mô hình RC, máy bay cố định, cánh thuyền tự làm. - Được làm bằng chất liệu cao cấp đảm bảo độ bền. - Sản phẩm làm nóng nhanh, an toàn trong sử dụng, nhỏ và dễ thực hiện được thiết kế hoàn hảo, chất lượng cao và sự khéo léo tinh tế .Thích hợp cho các mô hình RC Máy bay Máy bay cố định cánh thuyền. - Được săn đón đặc biệt bởi người có sở thích DIY để gắn kết mô hình phiên bản KIT. - Súng bắn keo 12V JACK XT60 đực với kích thước nhỏ gọn cùng trọng lượng nhẹ giúp bạn dễ dàng thao tác khi sử dụng và hạn chế việc mỏi tay khi đổ keo. - Được sử dụng điện áp 12V Pin Lipo an toàn hơn để sử dụng. - Có hệ thống công tắc ngắt điện trên súng. - Thân súng được làm từ nhựa cứng chắc chắn, bền bỉ và bảo vệ bạn không bị nóng tay khi sử dụng. Đầu xịt keo bằng sắt mạ xi, không bị gỉ khi sử dụng trong thời gian dài. - Việc cất giữ, bảo quản sản phẩm cũng dễ dàng và không mất quá nhiều không gian của bạn. - Sử dụng đơn giản, dễ dàng. Sản phẩm được tích hợp cơ chế kiểm soát dòng chảy của keo, giúp thời gian làm nóng keo của súng nhanh chóng, đáp ứng mọi nhu cầu sử dụng của bạn. - Bạn chỉ cần cho cây keo vào và cắm điện chờ keo nóng là có thể sử dụng.Ở phần đuôi súng, chúng ta vẫn có một lỗ hổng hình tròn để đưa keo nến vào. Đường kính lỗ tròn này vào khoảng 7mm, phù hợp với kích thước chuẩn của các loại keo nến nhỏ. CHÚ Ý: SẢN PHẨM GỒM 1 SÚNG BẮN KEO JACK XT60. #Tools.vn #Gluegun #Sungbankeo #Keonen #Jac
Xem thêm

Hộp Pin Lipo 12v Pmn4412 Cho Bộ Đàm Motorola Apx Xpr Dp Series

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

___________________❀TiTi Auto Mall❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ☞“Like” Items: Priority Shipping ( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Feature: 1. Radio battery eliminator car charger for walkie talkie, bringing you much convenience. 2. Supply power to for MOTOROLA Radio P8668 GP328D GP338D P6600 P6620 directly from car with this battery eliminator. 3. Switching IC Design as for Hytera PD680 PD500 PD560 PD660 radio battery back. 4. Especially designed to fit for MOTOROLA Radio P8668 GP328D GP338D P6600 P6620. 5. This radio battery eliminator can be used on car, bus, truck, taxi, etc. Specification: Condition: 100% Brand New Item Type: Car Radio Battery Eliminator Material: ABS+Copper Core Wire Color: As Pictures Shown OEM Model#: For Motorola PMNN4409, PMNN4409AR, PMNN4412, PMNN4448, PMNN4407 Applicable Walkie Talkie Model: Fit for Motorola APX Series: APX 1000, APX 3000, APX 4000, APX900 Fit for Motorola XPR 7000/7000e Series: XPR7550, XPR7350, XPR7580, XPR7380, XPR7550e, XPR4580e, XPR7350e, XPR7380e Fit for Motorola DP series: DP2400, DP2600, DP4400 DP4401 Fit for Motorola P6600/P6600i series: XiR P6600, XiR P6620, XiR P6600i, XiR P6620i Operation and Use: Take down the battery of two-way radio itself, use the electrical card on the intercom, and connect the other end to the car cigar lighter. You can use it directly, convenient and fast, unimpeded! (Used directly in the car instead of the battery!) Package List: 1 x Radio Battery Eliminator Note: 1.The input voltage of this appliance is 12.8V (that is, the voltage of the cigar lighter of ordinary cars). If you want to connect to a large truck (generally 24V), you cannot use this product! ! ! 2.Please double check the part number of your item, matching information is for reference only. 3.If you are unsure of the item, please contact us before buying to avoid unnecessary return, thank
Xem thêm

Mô Đun Sạc Pin Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Mô Đun Bảo Vệ Pin Lipo 3s 12v 18650 25a Bms Kèm Phụ Kiện

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

❤Welcome to cancanshop store❤ ✔Ready stock✔Good quality✔Most favorable prices (notes to purchase) -it usually takes eight to fifteen days for the goods to arrive B: if you have any questions or questions, please contact us at any time, we will be happy to chat with you. Welcome attention. there are promotions in our shop every day. Characteristics: -improving the efficiency of the use of fat batteries, preventing overcharging and prolonging their useful life. -monitor battery state to prevent dangerous conditions and reliable use. -wide application and easy installlation. -high-quality electronic components, stable performance and high charging efficiency. -comply with standard specifications and strictly comply with factory quality control. Specifications: Condition: 100% new Type of project: lithium battery protection plate Material: synthetic cardboard Color: as shown in figure Continuous diskharge current: 25a Instantaneous diskharge current: 75a Charging voltage: lipo battery charger, dc12.6v Charging current: maximum 25a Overcharged detection voltage: 4.28 0.05v Overcharge protection delay: 0.5 s Overcharged release voltage: 4.08±0.05 Battery balance test voltage: 4.2 0.05v Battery balance release voltage: 4.2 0.05v Battery balance current: 45ma Over diskharge detection voltage: 2.55 0.08v Delay in diskharge detection: 0.1 s Diskharge diskharge voltage: 2.9 0.1v Overcurrent detection voltage: 150mv Overcurrent detection delay: 10ms Overcurrent protection current: 175 5a Conditions for over current protection release: load diskonnect Short circuit protection conditions: external load short circuit Short circuit detection delay: 250 us Short circuit protection release conditions: diskonnect load Working current: 30ua Temperature range:-20°C-+80°C Packing list: 1pcs lipo battery protection
Xem thêm

pin lipo 12V 20Ah mới 100%

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

shop pin thiên năng xin giới thiệu pin lipo 12V 20Ah dung lượng đạt 21Ah điện áp cắt sạc 12.6V điện áp cắt xả 8.4V nội trở từng cell 1 miliom sử dụng mạch bảo v
Xem thêm

Bộ Sạc Pin Lithium Lipo 18650 3.7v 4.2v Đến 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to Beautifulandlovenew, I am very happy to serve you. Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

RC Bộ Sạc Cân Bằng Pin Lipo Nimh Với 12v 5a Bc-4S10 Lithium

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

main features:Simple operation and one-step charging process Voltage display function without external adapter Ultra-high charging accuracy with an error within ± 10mV Multiple protection functions to ensure battery and user safety Automatic battery repair function. New design balance architecture and algorithm, no need to discharge, save energy caveat Before charging, please make sure the power of the adapter is sufficient ( greater than equal 30W) Before charging, please confirm the voltage range of the adapter (9V-16V) This charger is only suitable for charging lithium ion or lithium polymer batteries Only one battery balance port of the charger can be connected at any time Do not use 2 or more battery balance ports at the same time Charging function description After the adapter is plugged in, the charger "drops" and the display shows; Insert the battery, the charger will "drop-drop" twice and start charging. The display cycle shows the total battery voltage and the voltage of each battery; After the battery is fully charged, the charger automatically stops charging, the display shows and flashes, and the buzzer prompts every 5 seconds. Voltage display function description Insert the battery (no need to connect the adapter), the total voltage of the battery and the voltage of each battery are displayed on the display. error code When the charger detects an error, the charging stops, the display shows an error code, the buzzer al, and it resumes work after reconnecting the adapter. color: White material: metal Package Contents: 1 * Lipo Battery Balance ChargerOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Xem thêm

Mô đun sạc pin Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v chuyên dụng

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Bạn thân mến, chào mừng đến với cửa hàng của tôi, springeven! Mô tả Sản phẩm: Sản phẩm hoàn toàn mới 100% và chất lượng cao Điện áp đầu vào: 4,5-8V DC Điện áp đầu ra: 4.3-27V DC có thể điều chỉnh Điện áp sạc: 4,2V DC Dòng sạc: tối đa 1A Dòng điện không sạc: tối đa 2A Ví dụ: VIN + bằng kết nối năng lượng mặt trời 5V, BAT + đầu dây có thể ra 4.2V đến 3.7V 18650 sạc pin. OUT + đầu dây có thể ra một điện áp điều chỉnh được. Có thể được sử dụng cho đồng hồ vạn năng, chuyển đổi sang sạc pin lithium. Gói hàng bao gồm: 1 x Mô-đun sạc tăng cường pin Lithium Li-ion (Phiên bản mới) Lưu ý: Do chênh lệch cài đặt ánh sáng và màn hình, màu sắc sản phẩm có thể hơi khác so với hình ảnh. Xin cảm ơn bạn! Cảm ơn bạn đã ghé thăm cửa hàng của chúng
Xem thêm

Bộ Sạc Nâng Áp Dc1 + + ~ Usb Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to EasyCoagulate1 store, have a good shopping! Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Bộ Sạc Pin Lithium Lipo 18650 3.7v 4.2v Sang 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to weijiaott.vn ! Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

Bộ Sạc Pin Lithium Lipo 18650 3.7v 4.2v - 5v 9v 12v 24v

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Welcome to our store Newwellknown!Wish you have a good shopping. Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

[GAV3]USB lithium lipo 18650 battery charger 3.7V 4.2V to 5V 9V 12V 24V step up module

Đánh giá cho sản phẩm (FTB Score)

ftb score rating icon 10

Mô tả

Product Description: 100% Brand New and High Quality Input voltage: 4.5-8V DC Output voltage: 4.3-27V DC adjustable Charging voltage: 4.2V DC Charging current: 1A max Discharging current: 2A max For example: VIN + side connected 5V solar panels, BAT + terminal can output 4.2V to 3.7V 18650 battery charge. OUT + terminal can output an adjustable voltage. Can be used for multimeter, converted to lithium battery charging. Package Included: 1 x Lithium Li-ion Battery Boost Charger Module (New Version) Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank
Xem thêm

pin lipo 12v

pin lipo 12v
Nguyễn Bảo Lan Phương
Viết bởi

Lan Phương rất thích đến Thiều Hoa mua đồ cho mẹ, ở đây mẹ Phương có thể chọn được rất nhiều kiểu đồ. Từ váy đầm, áo kiểu, chây váy cho đến các kiểu khăn choàng, hay túi xách.