Nodemcu 32s

Module trung tâm: Wifi BLE Soc ESP32 - Nguồn vào: 5VDC từ cổng micro USB. - Tích hợp mạch nạp và giao tiếp UART CP2102. - Tích hợp Led Status, nút BOOT và UNABLE - Kích thước: 28.33x51.45 mm Module trung tâm: Wifi BLE Soc ESP32 - Nguồn vào: 5VDC từ cổng micro USB. - Tích hợp mạch nạp và giao tiếp UART CP2102. - Tích hợp Led Status, nút BOOT và UNABLE - Kích thước: 28.33x51.45 mm Module trung tâm: Wifi BLE Soc ESP32 - Nguồn vào: 5VDC từ cổng micro USB. - Tích hợp mạch nạp và giao tiếp UART CP2102. - Tích hợp Led Status, nút BOOT và UNABLE - Kích thước: 28.33x51.45 mm ------------------******************---------------------- Điện tử Bách Việt luôn Bảo Hành Tất cả các sản phẩm cho tất cả Qúy khách là Khách hàng của Shop. Để được hỗ trợ thêm về sản phẩm bạn muốn mua, hỗ trợ kỹ thuật cũng như để xem thêm được nhiều sản phẩm hơn các bạn truy cập : http://dientubachviet.vn/ ------------------******************---------------------- #esp #esp8266 #giare #dientubachviet #linhkienchat

Package Included: 1 x NodeMCU-32S Lua WiFi IOT Development Board Module Specifications: Packaging size: 105mm*70mm*10mm/4.13*2.75*0.39'' Packaging weight: 12g Description: 1. NodeMCU-32S is the core development board designed by for Anxinke based on ESP-32S module. 2. The Development Board continues NodeMCU 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs. 3. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient. Cost-effective small volume. Easy to embed into any product Powerful, support LWIP protocol, freertos Support three modes: AP, STA, AP+STA coexistence mode Lua programming makes your development easier Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management ule. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-e Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly with the Arduino IDE. Support Lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Colour: Black Material: electronic components High performance-price ratio Small volume, easily embeded to other products Strong function with support LWIP protocol, Freertos Supporting three es: AP, STA, and AP+STA Supporting Lua program, easily to develop Development Board:https://github.com/Nicholas3388/LuaNode Tips: When you download the program to ESP32, you need to press the IOO button for 1-2 seconds. Package Contents:5 x ESP-WROOM-32 ESP-32S development boardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

ESP32 NodeMcu-32S Lua WiFi + Mô-đun giao diện nối tiếp Bluetooth cho IOT ESP-32S CPU lõi kép WIFI + BLE NodeMCU-32S Lua WiFi Thông số kỹ thuật WIFI: 802.11 b / g / n / e / i 802.11 n (2,4 GHz), lên tới 150 Mbps 802.11 e: QoS cho công nghệ đa phương tiện không dây. WMM-PS, UAPSD Tập hợp MPDU và A-MSDU Chặn ACK Phân mảnh và phân mảnh Giám sát / quét Beacon tự động Tính năng bảo mật 802.11 i: xác thực trước và TSN Truy cập được bảo vệ Wi-Fi (WPA) / WPA2 / WPA2-Enterprise / Wi-Fi được bảo vệ (WPS) Cơ sở hạ tầng Chế độ trạm BSS / Chế độ SoftAP Wi-Fi Direct (P2P), P2P Discovery, chế độ chủ sở hữu nhóm P2P và quản lý năng lượng P2P Tuân thủ và chứng nhận UMA Sự đa dạng và lựa chọn anten Thông số kỹ thuật Bluetooth: Tuân thủ thông số kỹ thuật Bluetooth v4.2 BR / EDR và ​​BLE Máy phát Class-1, class-2 và class-3 không có bộ khuếch đại công suất bên ngoài Kiểm soát năng lượng nâng cao Công suất truyền 10 dBm Máy thu NZIF với độ nhạy -98 dBm Nhảy tần thích ứng (AFH) HCI tiêu chuẩn dựa trên SDIO / SPI / UART UART HCI tốc độ cao, tối đa 4 Mbps Bộ điều khiển BT 4.2 và ngăn xếp máy chủ Giao thức khám phá dịch vụ (SDP) Hồ sơ truy cập chung (GAP) Giao thức quản lý bảo mật (SMP) Năng lượng thấp Bluetooth (BLE) ATT / GATT GIẤU Tất cả hồ sơ dựa trên GATT được hỗ trợ Hồ sơ dựa trên SPP giống như GATT BLE Beacon A2DP / AVRCP / SPP, HSP / HFP, RFCOMM CVSD và SBC cho codec âm thanh Bluetooth Piconet và Scatt

Specifications: Condition: Brand New ESP-32S ESP32 NodeMCU Development Board 2.4GHz WIFI + Bluetooth Dual Mode ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications. High performance-price ratio Small in size. Easily embeded to other devices Strong function with support LWIP protocol, Freertos Supporting Modes: AP, STA, AP+STA Supporting Lua program Package Included: 1pc x NodeMCU

Package Included: 1 x NodeMCU-32S Lua WiFi IOT Development Board Module Specifications: Packaging size: 105mm*70mm*10mm/4.13*2.75*0.39'' Packaging weight: 12g Description: 1. NodeMCU-32S is the core development board designed by for Anxinke based on ESP-32S module. 2. The Development Board continues NodeMCU 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs. 3. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient. Cost-effective small volume. Easy to embed into any product Powerful, support LWIP protocol, freertos Support three modes: AP, STA, AP+STA coexistence mode Lua programming makes your development easier Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan

[CL]NodeMCU-32S Lua ESP-32 2.4GHZ WiFi Development Board Based On ESP32 Module Features: 2.4GHz Dual Mode WiFi Development Board. Ultra-Low power consumption, works perfectly for Arduino IDE. Support LWIP protocol, Freertos. SupportThree Modes: AP, STA, and AP+STA. Descriptions: ESP32 is a safe, reliable, and scalable to a variety of applications Specifications: Material: electronic element Color: black & silver Size: 48.5*26*6.5mm Package Included: 1 x 2.4GHZ WiFi Development Board Notes: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank

Ai-thinker Nodemcu-32s provides a complete set of wifi 802.11b/g/n/e/i and bluetooth 4.2 solutions Support arduino ide programming Cp2102 (Usb ttl),,, Ai-thinker, download all types of software and tools from the original website Resources:

🌏 Nodemcu-32s nodemcu wifi bluetooth esp-3212 esp-32 replace lolin32 🔷🔷🔷 Sku: D306 Why hwthinker - we serve better. - quick response and fast shipping. - this nodemcu-32s is an esp32 board with 38pin pins which is certainly more compared to the average esp32s with only 36pin pins. - for arduino 's programming is the same as for &; nodemcu-32s &; - microprocessor: Esp32 - clock: Up to 240mhz - performance: Up to 600 dmips - rom: 448kb. - sram: 520kb - rtc slow sram: 8kb - rtc fast sram: 8kb - flash: 32mb (4 megabytes) - operating voltage: 2, 2v - 3,6vdc. - logic level: 3.3v (not 5v tolerant) - operating current: 80ma. - interfaces: Gpio / capacitive sensors / adc / dac pre amplified lna / can Up to 18 channels. - adc resolution: 12 bits - dac: 2. - dac resolution: 8 bits. Pwm function, i2c and spi - support wifi networks: 802.11 b / g / n 2.4 to 2.5ghz wifi frequency range - wpa / wpa2 / wpa2-enterprise / wps Encryption: Aes / rsa / ecc / sha - mode of operation: Station / softap / softap + station / p2p - built-in antenna - bluetooth: V4.2 br / edr and ble energy) - dimensions: 26mm (l) x 16mm (a) x 48mm (c) 🔷🔷🔷 👨‍🦳️🎙 Read compulsory notes before transactions 👨‍🦳️🎙 Check stock before order 👨‍🦳️🎙 The products that have been purchased cannot be returned 👨‍🦳️🎙 Do not accept any return & complaint in any form 👨‍🦳️🎙 Nodemcu-32s nodemcu wifi bluetooth esp-3212 esp-32 replace lo

NodeMCU-32S Lua ESP-32 2.4GHZ WiFi Development Board Based On ESP32 Module Features: 2.4GHz Dual Mode WiFi Development Board. Ultra-Low power consumption, works perfectly for Arduino IDE. Support LWIP protocol, Freertos. SupportThree Modes: AP, STA, and AP+STA. Descriptions: ESP32 is a safe, reliable, and scalable to a variety of applications Specifications: Material: electronic element Color: black & silver Size: 48.5*26*6.5mm Package Included: 1 x 2.4GHZ WiFi Development Board Notes: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank

☞ Welcome, my friends ☞ Excellent after-sales service.if you have any questions, please contact with us to solve for u. ☞Wish you Have a happy shopping time [TD]NodeMCU-32S Lua ESP-32 2.4GHZ WiFi Development Board Based On ESP32 Module Features: 2.4GHz Dual Mode WiFi Development Board. Ultra-Low power consumption, works perfectly for Arduino IDE. Support LWIP protocol, Freertos. SupportThree Modes: AP, STA, and AP+STA. Descriptions: ESP32 is a safe, reliable, and scalable to a variety of applications Specifications: Material: electronic element Color: black & silver Size: 48.5*26*6.5mm Package Included: 1 x 2.4GHZ WiFi Development Board Notes: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank

- nodemcu-32s-32s esp - tensilica xtensa 32-bit lx6 microprocessor - clock: Up to 240mhz - performance: Up to 600 dmips - rom: 448kb. - sram: 520kb - rtc slow sram: 8kb - rtc fast sram: 8kb - flash: 32mb (4 megabytes) - operating voltage: 2, 2v - 3,6vdc. - logic level: 3.3v (not 5v tolerant) - operating current: 80ma. - interfaces: Gpio / capacitive sensors / adc / dac pre amplified lna / can Up to 18 channels. - adc resolution: 12 bits - dac: 2. - dac resolution: 8 bits. Pwm function, i2c and spi - support wifi networks: 802.11 b / g / n 2.4 to 2.5ghz wifi frequency range - wpa / wpa2 / wpa2-enterprise / wps Encryption: Aes / rsa / ecc / sha - mode of operation: Station / softap / softap + station / p2p - built-in antenna - bluetooth: V4.2 br / edr and ble energy) - dimensions: 26mm (l) x 16mm (a) x 48m

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the Arduino IDE. ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. colour: black Material: electronic components size: 52x28x10mm Package Contents: 5/2 x ESP-32S unassembled development board 10/4 x 15 pins header<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 4* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Nodemcu-32s lua development board bluetooth wifi module - nodemcu-32s-32s esp - tensilica xtensa 32-bit lx6 microprocessor - clock: Up to 240mhz - performance: Up to 600 dmips - rom: 448kb. - sram: 520kb - rtc slow sram: 8kb - rtc fast sram: 8kb - flash: 32mb (4 megabytes) - operating voltage: 2, 2v - 3,6vdc. - logic level: 3.3v (not 5v tolerant) - operating current: 80ma. - interfaces: Gpio / capacitive sensors / adc / dac pre amplified lna / can Up to 18 channels. - adc resolution: 12 bits - dac: 2. - dac resolution: 8 bits. Pwm function, i2c and spi - support wifi networks: 802.11 b / g / n 2.4 to 2.5ghz wifi frequency range - wpa / wpa2 / wpa2-enterprise / wps Encryption: Aes / rsa / ecc / sha - mode of operation: Station / softap / softap + station / p2p - built-in antenna - bluetooth: V4.2 br / edr and ble energy) - dimensions: 26mm (l) x 16mm (a) x 48m

Value price NodeMCU-32S Lua ESP-32 2.4GHZ WiFi Development Board Based On ESP32 Module Features: 2.4GHz Dual Mode WiFi Development Board. Ultra-Low power consumption, works perfectly for Arduino IDE. Support LWIP protocol, Freertos. SupportThree Modes: AP, STA, and AP+STA. Descriptions: ESP32 is a safe, reliable, and scalable to a variety of applications Specifications: Material: electronic element Color: black & silver Size: 48.5*26*6.5mm Package Included: 1 x 2.4GHZ WiFi Development Board Notes: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank

Package Included: 1 x NodeMCU-32S Lua WiFi IOT Development Board Module Specifications: Packaging size: 105mm*70mm*10mm/4.13*2.75*0.39'' Packaging weight: 12g Description: 1. NodeMCU-32S is the core development board designed by for Anxinke based on ESP-32S module. 2. The Development Board continues NodeMCU 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs. 3. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient. Cost-effective small volume. Easy to embed into any product Powerful, support LWIP protocol, freertos Support three modes: AP, STA, AP+STA coexistence mode Lua programming makes your development easier Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan

Package Included: 1 x NodeMCU-32S Lua WiFi IOT Development Board Module Specifications: Packaging size: 105mm*70mm*10mm/4.13*2.75*0.39'' Packaging weight: 12g Description: 1. NodeMCU-32S is the core development board designed by for Anxinke based on ESP-32S module. 2. The Development Board continues NodeMCU 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs. 3. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient. Cost-effective small volume. Easy to embed into any product Powerful, support LWIP protocol, freertos Support three modes: AP, STA, AP+STA coexistence mode Lua programming makes your development easier Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. Support Lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 3* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 4* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Any shopping you need with the cheapest diskount is only in sh0pee indonesia. Shopee is an online shopping mall where you can get the earliest updates from your subscription store. Sell it to a very exciting facility, where you can have your favorite item with just one click. ★★★★★ The way shopping at the shopee is not difficult, especially for those of you who have never used this marketplace shopee application. Please consider the description of the following products. ★★ Power to the nodemcu esp-32s is supplemented via the on-board usb micro b connector or directly via the vin pin. The power source is selected automatically. Features and specifications: X operating voltage: 3.3v X voltage input: 7-12v X digital i / o pins (dio): 28 X analog pins input (adc): 8 X analog output pins (dac): 2 X spis: 2 X i2cs: 3 X flash memory: 4 mb X sram: 520 kb X clock speed: 240 mhz X wi-fi: Ieee 802.11 b / g / n / e / i: X integrated tr switch, balun, lna, power amplifier and matching network Completeness: X1pcs nodemcu esp-32s wifi and bluetooth module ★★★ Note: Please confirm or send feedback when the item is received at the destination address. ★★★★★★★★★★ Use an exclusive diskount. Shopee cooperates with a number of brands that already have common kalayak beliefs. Therefore, shopee sometimes held exclusive promotions for several days and sold goods at a fairly low price. Consider the web or app of shopee to get a suitable p

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. Support Lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 3* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 4* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Package Included: 1 x NodeMCU-32S Lua WiFi IOT Development Board Module Specifications: Packaging size: 105mm*70mm*10mm/4.13*2.75*0.39'' Packaging weight: 12g Description: 1. NodeMCU-32S is the core development board designed by for Anxinke based on ESP-32S module. 2. The Development Board continues NodeMCU 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs. 3. When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient. Cost-effective small volume. Easy to embed into any product Powerful, support LWIP protocol, freertos Support three modes: AP, STA, AP+STA coexistence mode Lua programming makes your development easier Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 4* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

☞ Welcome, my friends ☞ Excellent after-sales service.if you have any questions, please contact with us to solve for u. ☞Wish you Have a happy shopping time [HP]NodeMCU-32S Lua ESP-32 2.4GHZ WiFi Development Board Based On ESP32 Module Features: 2.4GHz Dual Mode WiFi Development Board. Ultra-Low power consumption, works perfectly for Arduino IDE. Support LWIP protocol, Freertos. SupportThree Modes: AP, STA, and AP+STA. Descriptions: ESP32 is a safe, reliable, and scalable to a variety of applications Specifications: Material: electronic element Color: black & silver Size: 48.5*26*6.5mm Package Included: 1 x 2.4GHZ WiFi Development Board Notes: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank

As long as there 's dietalase and can be clicked buy brother The nodemcu esp-32s is one of the development board created by nodemcu to evaluate the esp-wroom-32 module. It is based on the esp32 microcontroller that boasts wifi, Bluetooth, Ethernet and low power support all in a single chip. _x000d Power to the nodemcu esp-32s is supplemented via the on-board usb micro b connector or directly via the vin pin. The power source is selected automatically. _x000d _x000d The device can operate on an external supply of 6 to 20 volts. If using more than 12v, the voltage regulator may overheat and damage the device The recommended range is 7 to 12 volts. X000d _x000d Features and specifications: _x000d_ Tenslica 32-bit single- / dual-core cpu xtensa lx6_x000d_x X operating voltage: 3.3v_x000d_ X input voltage: 7-12v_x000d X digital i / o pins (dio): 28_x000d_ X analog pins input (adc): 8_x000d_ X analog output pins (dac): 2_x000d_ Uarts: 3_x000d Spis: 2_x000d I2cs: 3_x000d X flash memory: 4 mb_x000d X sram: 520 kb_x000d_ X clock speed: 240 mhz_x000d_ X wi-fi: Ieee 802.11 b / g / n / e / i: _x000d X integrated tr switch, balun, lna, power amplifier and matching network_x000d X wep or wpa / wpa2 authentication, or open networks_x000d_ _x000d Completeness: _x000d X1pcs nodemcu esp-32s wifi and bluetooth module_x000d_db _x000d _x000d _x000d _x000d "X000d_x Source picture: Aliexpress com For the return please inform chat with us_x000d Thank you. X000d Sku: 3131 / 1205361774303035392

Dual core ESP-32 development board, 2.4GHz Dual e Development Board. Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the for Arduino IDE. Support Lua program, easy to develop, support LWIP protocol, Freertos, three es : AP, STA and AP + STA. ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold. Development board aplication : https://github.com/Nicholas3388/LuaNode Colour:Black Material:PC + metal Size:5x3.5cm Package Contents: 3* IoT Development BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Package Included: 1 x NodeMCU-32S Lua WiFi IOT Development Board Module Specifications: Packaging size: 105mm*70mm*10mm/4.13*2.75*0.39'' Packaging weight: 12g Description: -NodeMCU-32S is the core development board designed by for Anxinke based on ESP-32S module. -The Development Board continues NodeMCU 1.0 classic design, eliciting most I/O to both sides of the needle, developers can connect peripherals according to their own needs. -When using breadboard for development and debugging, the standard needle arrangement on both sides can make the operation more simple and convenient. Cost-effective small volume. Easy to embed into any product Powerful, support LWIP protocol, freertos Support three modes: AP, STA, AP+STA coexistence mode Lua programming makes your development easier Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understan

☞ Welcome, my friends ☞ Excellent after-sales service.if you have any questions, please contact with us to solve for u. ☞Wish you Have a happy shopping time [YO]NodeMCU-32S Lua ESP-32 2.4GHZ WiFi Development Board Based On ESP32 Module Features: 2.4GHz Dual Mode WiFi Development Board. Ultra-Low power consumption, works perfectly for Arduino IDE. Support LWIP protocol, Freertos. SupportThree Modes: AP, STA, and AP+STA. Descriptions: ESP32 is a safe, reliable, and scalable to a variety of applications Specifications: Material: electronic element Color: black & silver Size: 48.5*26*6.5mm Package Included: 1 x 2.4GHZ WiFi Development Board Notes: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank