Micro servo 9g

Description: Type: Micro Servo Working torque: 2KG/CM Product category: toy electronic accessories Working voltage: 4.8V Includes: 1 x Steering gear,1 x Manual, 1 x Color box packaging Feature: --Strong strength --Stable performance The colors deviation might differ due to different monitor settings, please kindly understand. Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so

Features: High quality and high cost performance. All Nylon Gear. 245mm connector wire. Large stall torgue of 1.6 Kg. Small size and light weight. With 3 sets of servo horns and fittings. Specification: color: blue Operating Speed (4.8V no load): 0.12sec/60 degrees Stall torque: 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V)operating voltage: 3.0-7.2V Temperature range: -30¡æ~60¡æ Dead band width: 7usItem size: 3.2 * 3 * 1.2cm Item weight: 9g Connector wire length: 24.5cm Package include: 1 x SG90 Gear Micro Servo 1 x 25cm wire 3 x Servo Horns 3 x

Description: Type: Micro Servo Working torque: 2KG/CM Product category: toy electronic accessories Working voltage: 4.8V Includes: 1 x Steering gear,1 x Manual, 1 x Color box packaging Feature: --Strong strength --Stable performance The colors deviation might differ due to different monitor settings, please kindly understand. Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so

Động Cơ RC Micro Servo 9G là sản phẩm động cơ quay theo góc thường được sử dụng trong các mô hình xe điều khiển, cano điều khiển hoặc các loại máy sử dụng cơ cấu kéo. Do được thiết kế bánh răng bằng nhựa nên lực kéo của servo 9G không lớn vì vậy cần lưu ý khi sử dụng tránh gây hỏng cho servo, tuy nhiên sản phẩm vẫn đáp ứng đủ những yêu cầu của 1 servo với độ chính xác tốt, tốc độ hoạt động tốt đáp ứng hầu hết nhu cầu cho mô hình vừa và nhỏ. Thông số kỹ thuật Động Cơ RC Micro Servo 9G - Chất liệu vỏ: Nhựa - Chất liệu bánh răng: nhựa - Có bộ cánh tay đòn nhựa và ốc đi kèm - Khối lượng : 9g - Momen xoắn: 1.8kg/cm - Tốc độ hoạt động: 60 độ trong 0.1 giây - Điện áp hoạt động: 4.8V(~5V) - Nhiệt độ hoạt động: 0 ºC – 55 ºC - Kích thước: 22.2x11.8.

Sự miêu tả: Áp dụng vật liệu tiên tiến, trong một sự hoàn hảo ổn định, tuổi thọ dài. Động cơ mạnh mẽ có thể cung cấp cho đồ chơi của bạn một hiệu suất tốt hơn và ổn định hơn. Phù hợp với hầu hết các mô hình RC, như xe hơi, thuyền, máy bay quy mô. Loại: Micro Servo Mô-men xoắn làm việc: 2kg / CM Danh mục sản phẩm: phụ kiện điện tử đồ chơi Điện áp làm việc: 4,8V Bao gồm: 1 x Thiết bị lái, 1 x Hướng dẫn sử dụng, 1 x Bao bì hộp màu Đặc tính: - Sức mạnh mạnh mẽ - Hiệu suất ổn định Description: Adopting advanced material, in a stable perfoirmance, long service life. Powerful motor can give your toy a better and more stable performance. Fit for most RC model, such as car, boat, scale airplane. Type: Micro Servo Working torque: 2KG/CM Product category: toy electronic accessories Working voltage: 4.8V Includes: 1 x Steering gear,1 x Manual, 1 x Color box packaging Feature: --Strong strength --Stable performance The colors deviation might differ due to different monitor settings, please kindly understand. Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so

Động cơ RC SERVO SG92R -Động cơ RC Servo SG92R là phiên bản nâng cấp của động cơ RC Servo 9G với các khớp được làm từ nhựa tổng hợp kết hợp với sợi carbon cho tôc độ phản ứng nhanh hơn và lực kéo mạnh hơn. -Động cơ SG92R có kich thước nhỏ, thường được sử dụng để làm các mô hình nhỏ hoặc các cơ cấu kéo không cần đến lực nặng. -Động cơ RC Servo SG92R có tôc độ phản ứng nhanh, các bánh răng được làm bằng nhựa tổng hợp kết hợp với sợi carbon cho độ chinh xác cao và tăng lực kéo, -Động cơ RC Servo SG92R có tich hợp sẵn Driver điêu khiển động cơ bên trong nên có thể dễ dàng điêu khiển góc quay bằng phương pháp điêu độ rộng xung PWM. -Lực kéo: 2.5kg.cm -Chất liệu: POM và sợi Carbon -Điện áp hoạt động: 4.8-5VDC -Tôc độ: 0.1 sec/ 60 degrees (4.8VDC) -Kich thước: 23×12.2x27mm -Trọng lượng: 9g -Điều khiển Servo bằng Arduino: http://arduino.vn/tutorial/1423-avr-dieu-khien-dong-co-servo-sieu-chuan-voi-bien-do-goc-cuc-nho #Servo#SG92R#hoctap#phattrien#nghi

✿✿ fashionapple ✿✿ Features: 100% brand and high quality 9g steering gear, small steering gear Using ordinary micro motor, it is a very good steering gear with high cost performance at present! Due to the reduced tension, the manufacturer recommends that it is only suitable for the ordinary small electric aircraft model, not recommended for the use of large fixed wings and electric helicopters! Technical parameters: Product Name: SG90 9g small steering gear (version s) Product size: 23x12.2x29mm Product torque: 1.6kg/cm (4.8V) Reaction speed: 0.1sec/60degree(4.8v) Working voltage: 4.8V Service temperature: 0-55 degrees Action dead zone: 10us Gear medium: Nylon Working mode: simulation Package include:1Set SG90 Micro Metal Gear 9g Servo Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank

"Mô tả Sản phẩm: Dây tín hiệu màu cam Điện cực dương đỏ Điện cực âm nâu SG90 9g servo tham số: Cân nặng: 9g Kích thước: 23x12.2x29mm Tốc độ hoạt động không tải: 0,12 giây / 60 độ (4,8V); 0,10 giây / 60 độ (6.0V) Mô-men xoắn: 1,2-1,5kg · cm (4,8V) Nhiệt độ hoạt động: -30 ~ + 60 độ C Cài đặt vùng chết: 5 micro giây Điện áp làm việc: 4,8V ~ 6V Phụ kiện: ba chức năng góc bánh lái, vít cố định, chiều dài cáp 25CM Phạm vi áp dụng: Đã sửa cánh, máy bay trực thăng, KT, rung, lượn, robot nhỏ, người thao tác và các mô hình kh

Great little servo, it works smoothly and has an amazing amount of torque for its size. The responce is really quick. Description: Brand: MR.RC Stall torque: 2.4kg/cm (4.8V), 2.8kg/cm (6V) Operating voltage: 4.8-6V Operating speed: 0.11sec/60°at 4.8v, 0.09sec/60°at 6v Cable length: 255mm Gear material: Metal Suit for racing car, helicopter and airplane Weight: 13g Package Information: Package size: 4.5 * 4 * 3cm / 1.8 * 1.6 * 1.2in Package weight: 20g / 0.7oz Brand gift box package Package List: 1 * Servo (with accesso

Hello everyone, our company is in Shenzhen。we specialize in selling module. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Thương hiệu chính hãng Racerstar Tên sản phẩm: MG90S 9g Analog servo Điện áp hoạt động: 4.8V-6.0V Lực kéo: 1.8kg/cm(4.8V ), 2.2kg/cm(6V) Vận tốc phản hồi: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v) Chất liệu: vỏ nhựa, nhông kim loại Loại motor: Coreless Connector Wire Length: 175mm Weight: 20g/PC Dimension: 22.8 x 12.2 x 28.5mm Application: For 450 RC Helicopter RC Car Boat Features: - Micro size - Suitable for RC Truck, Boat, Racing Car, Helicopter and Air

The servo tower pro sg90 motor is a small servo motor that is widely used for many hobbies, such as hobby Remote control, robotic, etc. "Complications: For those of you who want to build robots or experiment with small servos, this servo motor is very suitable for you. It weighs only 9 grams and its dimensions are quite small. "Possessive: Dimension: 23x29 x 122 mm weight: 9g (motor only) reaction speed: 0.1 seconds / 60 degrees (4.8v without load) Stall torque (4.8v): 1.6 kg / cm work temperature: 0-55 c Dead band width: 10 usec work voltage: 4.8v material gear nylon 150mm analog cable length Xxpinout power, ground and control cable "Tatasheet: http://datasheet.sparkgo.com.br/SGQOServo . Pdf Xxisi package: 1 unit servo tower pro sg90 3 unit multiple propellers 3 units bolts (2 large bolts, 1 small bolts) Products match the image. Make sure before buying Good buyers give positive feedback and good comment Buying means agreeing. Have a good shoppi

BỘ SẢN PHẨM GỒM: • 1x Động cơ RC Servo 9G • 1x Bộ cánh tay nhựa 3 món Động cơ Servo SG90 có kích thước nhỏ, thích hợp làm các mô hình nhỏ để học lập trình. Động cơ dùng bánh răng nhựa nên không nên dùng với các tải nặng. Động cơ servo 9G được điều khiển dễ dàng bằng cách điều kiển độ rộng xung PWM. THÔNG SỐ KỸ THUẬT • Điện áp: 4.2V – 6V • Tốc độ đáp ứng: 60 độ/0.3 giây • Lực kéo: 1.5Kg.cm • Kích thước: 23x12.2x29 mm • Khối lượng: 9 grams MÀU DÂY ĐIỀU KHIỂN • Đỏ: Nguồn cấp dương • Xám: GND • Cam: Dây điều khiển PWM Các bạn quan tâm đến sản phẩm, vui lòng liên hệ cửa hàng depacongnghe để được tư vấn và hỗ trợ dịch vụ tốt nhất. #SG90 #Servo #MicroServo #Servo #Arduino #Mo

[NEWBABY11] 1Set SG90 Micro Metal Gear 9g Servo For RC Plane Helicopter Boat Car Parts******************************************Welcome to our NEWBABY11 STORE. ALL the products are available , you could buy. ********************************************Features: 100% brand and high quality 9g steering gear, small steering gear Using ordinary micro motor, it is a very good steering gear with high cost performance at present! Due to the reduced tension, the manufacturer recommends that it is only suitable for the ordinary small electric aircraft model, not recommended for the use of large fixed wings and electric helicopters! Technical parameters: Product Name: SG90 9g small steering gear (version s) Product size: 23x12.2x29mm Product torque: 1.6kg/cm (4.8V) Reaction speed: 0.1sec/60degree(4.8v) Working voltage: 4.8V Service temperature: 0-55 degrees Action dead zone: 10us Gear medium: Nylon Working mode: simulation Package include:1Set SG90 Micro Metal Gear 9g Servo Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank

Description There are 4 kinds of package type for you to choose, you can choose according to your demands. The weight of this SG90 micro servo motor is just 9g, lightweight and good performance. The torque of this servo motor is 1.5kg/cm and the working voltage is 4.2-6V. And the working temperature is 0℃-55℃, the operation speed is 0.3 second/60 degree. This SG90 micro servo motor is easy to use and install, you can use it with ease and convenience. Specification: Type: servo motor. Size: 23*12.2*29mm. Color: as pictures show. Torque: 1.5kg/cm. Working voltage: 4.2-6V. Working temperature: 0℃-55℃. Operation speed: 0.3 second/60 degree. Note: There might be a bit color distortions due to different computers resolutions. There might be slight errors due to different hand measurements. Package included: Type 1: 10* Servo motor. Type 1: 2* Servo motor. Type 1: 4* Servo motor. Type 1: 6* Servo m

Descriptions: 100% Brand new and high quality Material:ABS Size: 23x12.2x29mm Color:as picture show Package include:1Set Note: 1.Please allowed 1-2cm differences due to manual measurement thanks. 2.Due to the difference between different monitors the pictures may not reflect the actual colour of the

SG90 Features: High quality and high cost performance. All Nylon Gear. 245mm connector wire. Large stall torgue of 1.6 Kg. Small size and light weight. With 3 sets of servo horns and fittings. Specification: color: blue Operating Speed (4.8V no load): 0.12sec/60 degrees Stall torque: 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V) operating voltage: 4.8V~6V Dead band width: 7usc Item size: 2.3 * 1.22 * 2.9cm Item weight: 9g Connector wire length: 25cm(Approx.) Package include: 1 x SG90 Gear Micro Servo 1 x 25cm wire 3 x Servo Horns 3 x Screw SG92R Specification: Weight: 11g Dimension: 23×12.2x27mm Stall torque: 2.5kg /cm(4.8v) Gear type: Nylon with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Operating voltage: 4.8v Temperature range: 0c_ 55c Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and so on) servo arms &screws It's universal "S" type connector that fits most receivers, including JR, Hitec ,GWS, and so on CE &RoHS approved MG90S ​Product description Product Model: MG90S Net weight: 13g Weight:25g Working torque: 2KG/cm Reaction speed: 0.11 seconds / 60 degrees (4.8V) Operating temperature: 0-55 ℃ The deadband setting: 5 microseconds Plug Type: JR, FUTABA General Rotation angle: 180 degrees Servo: analog Servo Operating voltage: 4.8V Structural Material: Aluminum metal teeth, coreless motor, double ball bearing Line Length：30 CM Scope: small and medium-sized electric model aircraft and m

【HAO】1Set SG90 Micro Metal Gear 9g Servo For RC Plane Helicopter Boat Car PFeatures: 100% brand and high quality 9g steering gear, small steering gear Using ordinary micro motor, it is a very good steering gear with high cost performance at present! Due to the reduced tension, the manufacturer recommends that it is only suitable for the ordinary small electric aircraft model, not recommended for the use of large fixed wings and electric helicopters! Technical parameters: Product Name: SG90 9g small steering gear (version s) Product size: 23x12.2x29mm Product torque: 1.6kg/cm (4.8V) Reaction speed: 0.1sec/60degree(4.8v) Working voltage: 4.8V Service temperature: 0-55 degrees Action dead zone: 10us Gear medium: Nylon Working mode: simulation Package include:1Set SG90 Micro Metal Gear 9g Servo Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!

[GOLDENS] 1Set SG90 Micro Metal Gear 9g Servo For RC Plane Helicopter Boat Car Parts******************************************Welcome to our DAYDAYTO STORE. ALL the products are available , you could buy. ********************************************Features: 100% brand and high quality 9g steering gear, small steering gear Using ordinary micro motor, it is a very good steering gear with high cost performance at present! Due to the reduced tension, the manufacturer recommends that it is only suitable for the ordinary small electric aircraft model, not recommended for the use of large fixed wings and electric helicopters! Technical parameters: Product Name: SG90 9g small steering gear (version s) Product size: 23x12.2x29mm Product torque: 1.6kg/cm (4.8V) Reaction speed: 0.1sec/60degree(4.8v) Working voltage: 4.8V Service temperature: 0-55 degrees Action dead zone: 10us Gear medium: Nylon Working mode: simulation Package include:1Set SG90 Micro Metal Gear 9g Servo Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank

SG92R 2.5KG Micro 9g Servo Nylon Carbon fiber Gears Replace SG90 For RC Model Aeromodelling Helicopter

Features: Metal Gear Full Ball Bearing Light Weight Less Noise Specifications: Dimensions: 3.2cmx1.2cmx3.3cm(1.26"x0.47"x1.30") Operating Speed (4.8V no load): 0.11sec / 60 degrees Operating Speed (6.0V no load): 0.10sec / 60 degrees Stall Torque (4.8V): 2.0 kg/cm Temperature Range: 0 to 55 degree C Dead Band Width: 5 Microsecond Operation Voltage: 4.8Volts Recommend Model: Mini Car / Mini Ship /Helicopter & Airplane Package include: 1pcs MG90S RC Metal Gear Speed & Torque Micro Servo 1pcs fixing screws 3pcs damping pouches and aluminum sets Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank

[Ready Stocks]5Pcs 9g Micro Mini Servo Motor Horns for RC Robot Arm Helicopter Airplane Car Features: High quality and high cost performance All Gear made of plastic Large stall torgue of 1.5 Kg Small size and light weight With 3 sets of servo horns and fittings Description: This micro servo motor is suitable for RC Robot Arm Helicopter Foamy Airplane Car Boat. Specification: Color: blue Operating Speed (4.8V no load): 0.12sec/60 degrees,0.1sec/60 degrees(6V) operating voltage:3.5-6.0V Temperature range:-30℃~60℃ Stall torgue:1.5kg/cm Dead band width: 5us Item size: 3.2 * 3 * 1.2cm Item weight:9g/pcs Connector wire length:25cm Package information: Package size: 8 * 4 * 4cm / 3.1 * 1.6 * 1.6in Package weight: 60g / 2.14oz Plastic bag package Package Included: 5 x Micro Servo 15 x Servo Horns 15 x Screws Notes: 1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. 2. Please allow slight dimension difference due to different manual measure

Description: Brand: Racerstar Product: SG90 9g Analog Servo Operating voltage: 3.0V-7.2V Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque: 1.2kg / 42.3oz(4.8V);1.6 kg / 56.4oz (6.0V) Dead Band Width: 7us Connector wire length: 245mm Temperature range: -30℃~60℃ Weight: about 9g Size: 3.2 x 3 x 1.2cm Application: For RC Helicopter, RC Airplane Features: - High quality and high cost performance. - All Nylon Gear. - Large stall torgue of 1.6 Kg. - Small size and light weight. Package Included: 1* Racerstar SG90 9g Micro Servo Racerstar SG90 9g Micro Plastic Gear Analog Servo For RC Helicopter Airplane Robot Before purchase: 1.All the goods are ready stock, we will arrange the shipment at once if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.No warranty,if you receive a defect item,please contact us at once with item picture. 4.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) and 10-15 days shipment. 2.If you have not received the item after 15 days shipment,Please contact us. After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or

Description： This item is a digital servo steering gear for SG90, which adopts metal gear structures, featuring high-speed and stable. It fits for all kinds of R/C toys, not advise for big fixed-wing toys and big helicopter. Features： Color: As the pictures shown. Material: ABS. Size: About 2.3 x 1.22 x2.9cm. Torsional moment: 1.6kg/cm. Working Voltage: 4.8V. Temperature range: 0℃ - 55℃. Rotation Angel：180° Operating speed: 0.1 seconds /60 degree. Dead band width: 10 microseconds. Gear Medium: Nylon. Working Mode: Simulation. Brand new and high quality, durable to use. This is the most popular mini servo. Only weights 9 gram and gives you a 1.5kg.cm torque. Suitable for Beam type robot. Light weight and less Noise. Accessories Include：Steering gear，rocker arm，screw，etc Note: 1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before your purchase. 2.The colors may have different as the difference display,pls unders

Welcome to my store,xingherjr! Features: 100% brand and high quality 9g steering gear, small steering gear Using ordinary micro motor, it is a very good steering gear with high cost performance at present! Due to the reduced tension, the manufacturer recommends that it is only suitable for the ordinary small electric aircraft model, not recommended for the use of large fixed wings and electric helicopters! Technical parameters: Product Name: SG90 9g small steering gear (version s) Product size: 23x12.2x29mm Product torque: 1.6kg/cm (4.8V) Reaction speed: 0.1sec/60degree(4.8v) Working voltage: 4.8V Service temperature: 0-55 degrees Action dead zone: 10us Gear medium: Nylon Working mode: simulation Package include:1Set SG90 Micro Metal Gear 9g Servo Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you! Have a nice shopping

Descrição do produto em inglês após português Descrições: 100% novo e de alta qualidade Material: Abs Servo: 90 ° ~ 180 ° Tamanho: 23x12,2x29mm Cor: Como mostrado na imagem O pacote inclui: 1 conjunto Nota: Observação: 1.permita diferenças de 1-2cm devido à medição manual. 2.devido à diferença entre monitores diferentes, as imagens podem não refletir a cor real do item. ************************************************** Description: Descriptions: 100% Brand new and high quality Material:ABS Servo :90°~180° Size: 23x12.2x29mm Color:as picture show Package include:1Set Note: 1.Please allowed 1-2cm differences due to manual measurement thanks. 2.Due to the difference between different monitors the pictures may not reflect the actual colour of the i

Features: Metal Gear Full Ball Bearing Light Weight Less Noise Specifications: Dimensions: 3.2cmx1.2cmx3.3cm(1.26"x0.47"x1.30") Operating Speed (4.8V no load): 0.11sec / 60 degrees Operating Speed (6.0V no load): 0.10sec / 60 degrees Stall Torque (4.8V): 2.0 kg/cm Temperature Range: 0 to 55 degree C Dead Band Width: 5 Microsecond Operation Voltage: 4.8Volts Recommend Model: Mini Car / Mini Ship /Helicopter & Airplane Package include: 1pcs MG90S RC Metal Gear Speed & Torque Micro Servo 1pcs fixing screws 3pcs damping pouches and aluminum sets Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank

Description The servo tower pro sg90 is a small servo motor that can be used for various hobbies, Like a hobby of remote control, Robotic., Etc. Specs Dimension: 22.6x21.8x11.4 mm Weight (only motor): 9g Speed: 0.12 s / 60 degree (4.8v without load) Stall torque (4.8v): 10.2oz / in (1.98 kg / cm) Temperature range: - 30 to 60 c Dead band width: 4usec. Working voltage: 3.5~8.4volts 150mm cable length Package contents 1 unit servo tower pro sg90 3 unit various propellers 3 units bolts (2 large bolts, 1 small bolts) It receives electronic project-projects, layout and pcb print. Confused with the project you created? Can we consult or can we make, we also receive layout and pcb print services please contact us via chat shoppe #Arduino #Microcontroller #Starterkit #Arduinostarterkit

[xo94bsy]1Set SG90 Micro Metal Gear 9g Servo For RC Plane Helicopter Boat Car PartsFeatures: 100% brand and high quality 9g steering gear, small steering gear Using ordinary micro motor, it is a very good steering gear with high cost performance at present! Due to the reduced tension, the manufacturer recommends that it is only suitable for the ordinary small electric aircraft model, not recommended for the use of large fixed wings and electric helicopters! Technical parameters: Product Name: SG90 9g small steering gear (version s) Product size: 23x12.2x29mm Product torque: 1.6kg/cm (4.8V) Reaction speed: 0.1sec/60degree(4.8v) Working voltage: 4.8V Service temperature: 0-55 degrees Action dead zone: 10us Gear medium: Nylon Working mode: simulation Package include:1Set SG90 Micro Metal Gear 9g Servo Note: Please allow 1-3cm differs due to manual measurement, thanks. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank

Động cơ Servo SG92R 2.5kg Micro 9g cho điều khiển từ xa Digital Điện áp hoạt động 5V Góc quay 180 độ Phụ kiện kèm theo gồm một số cánh tay. Và một số óc vít Là dòng nối tiếp của SG90 nhưng được gia cố sợi carbon nhông, chịu lực tốt hơn Động cơ RC Servo SG92R là phiên bản nâng cấp của RC Servo 9G với các khớp được làm từ nhựa tổng hợp kết hợp với sợi carbon cho tôc độ phản ứng nhanh hơn và lực kéo mạnh hơn. Động cơ SG92R có kich thước nhỏ, thường được sử dụng để làm các mô hình nhỏ hoặc các cơ cấu kéo không cần đến lực nặng. Động cơ RC Servo SG92R có tôc độ phản ứng nhanh, các bánh răng được làm bằng nhựa tổng hợp kết hợp với sợi carbon cho độ chinh xác cao và tăng lực kéo, động cơ RC Servo SG92R có tich hợp sẵn Driver điêu khiển động cơ bên trong nên có thể dễ dàng điêu khiển góc quay bằng phương pháp điêu độ rộng xung PWM. Thông số kỹ thuật: Lực kéo: 2.5KG.CM Chất liệu: POM và sợi Carbon Điện áp hoạt động: 4.8-5VDC Tôc độ: 0.1 sec/ 60 degrees (4.8VDC) Kich thước: 23x12.2x27mm Trọng lượn