Máy in 3d reprap prusa i3

Is equipped with NTC3950 thermistors and 12V 40W heater,12V fan. It is pre-assembled with all metal heatbreak and 0.4mm nozzle. 2 x extra heatbreaks,one all metal,anther one PTFE lined;piece of PTFE liner tubing for repairs;3 x extra nozzles-0.3mm,0.4mm and 0.5mm;PC4-M6 and PC4-01 tube fittings for extruder cold end;Hex driver. Use all metal heatbreaks for higher melting point plastics and PTFE lined for easy print with PLA. High accuracy:1% Resistance value at 25 Celsius=100K Color:color as shown material:metal Size:Line length is about 1m Package Contents: 1 x All Metal V6 hotend 1.75mm/0.4mm nozzle/Fan 30mm 12V 0.13A with shroud 1 x One Meter long Bowden tubing 4mm OD 2mm ID 1 x PC4-M6 Tube Fitting 1 x PC4-01 Tube Fitting 1 x V5,V6 compatible nozzle 0.3mm 1 x V5,V6 compatible nozzle 0.4mm 1 x V5,V6 compatible nozzle 0.5mm 1 x All metal heatbreak for 1.75mm 1 x PTFE lined heatbreak for 1.75mm 1 x piece of PTFE liner tubing for repairs 1 x Hex driver. 1 x Thermal Protection Silicone Sock.Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: Item type:Auto-leveling sensor Applicable and models: Prusa i3 MK3 3D printer Weight: 50g Module: Auto Level Sensor Module Package Include: 1 * auto-leveling sensor Note: The colors deviation might differ due to different monitor sett

UPGRADE: Original Aluminum Drive Feed for Creality 3D Printers CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. STABLE and DURABLE: DIY kit and you need to assemble by yourself. Our kits include all the necessary screws & parts needed to directly replace your old original weak extruder. EASY TO INSTALL: All you do is unbolt the old original Creality extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame. ADVANTAGES: The advantages of a metal extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. This ified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament. Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments. Easy and convenient to use. With high quality and durable performance. 100% brand new and in good condition. colour: red Material: Aluminum Package Contents: 1x Creality 3D - Extruder Upgrade Kit Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For prusa i3 mk3 3D Printer Quantity: 1 pc Colour: Black Material: metal + plastic Package Contents: 1* pinda v2 auto-leveling sensorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features Brand new and high quality Size:22*22cm Color:as the pic Product Name: 3D printer thermal bed sheets, (This product is different from Ordinary material and thickness,with High-Quality, Company's Own Design and Production of Floor.There are Gold Version and Sandblasting Bright Silver Version) Note:Please leave message to tell us which type you need,or we will send Type A to you Package included: 1x MK2/MK3 support

Features: Durable and long-lasting use. It's easy to use and can ensure a fourth round tooth profile The precise design will ensure its practicability in the work Designed specifically for linear movement. GT2 pulley and belt are used together, very convenient to use. Specifications: Material: rubber Colour: Black Size: 518cm in length and 6mm in width Pitch: 1mm Tooth width: 6mm Weight: 45g Product list: 1 Pcs*GT2-6MM timing belt Note: Due to the difference between different monitors, the pictures may not reflect the actual color of the item. Compare the detail sizes with yours, please allow 1-3cm error, due to manual measur

☃☃Dear friends, {forstrehhuj} has opened! ! ! Warmly welcome all of you to come and patronize. I will bring you the best shopping experience with my most sincere service! ! !☃☃ Features Brand new and high quality Size:22*22cm Color:as the pic Product Name: 3D printer thermal bed sheets, (This product is different from Ordinary material and thickness,with High-Quality, Company's Own Design and Production of Floor.There are Gold Version and Sandblasting Bright Silver Version) Note:Please leave message to tell us which type you need,or we will send Type A to you Package included: 1x MK2/MK3 support

⏳⏳Dear friends, {tweettwehhuj} has opened! ! ! Warmly welcome all of you to come and patronize. I will bring you the best shopping experience with my most sincere service! ! !⏳⏳ Features Brand new and high quality Size:22*22cm Color:as the pic Product Name: 3D printer thermal bed sheets, (This product is different from Ordinary material and thickness,with High-Quality, Company's Own Design and Production of Floor.There are Gold Version and Sandblasting Bright Silver Version) Note:Please leave message to tell us which type you need,or we will send Type A to you Package included: 1x MK2/MK3 support

Description: Name: 3D Printer Tool Kits Exquisite and compact, light and easy to design, easy to use. High-quality steel burin, sharp cut surface, easy to use. Stainless steel tweezers coated with conductive carbon black for antistatic effect. The scraper is made of high quality material, environmentally friendly, non-toxic, high hardness, tough, convenient to use, high temperature resistant. Applicable for most of 3D printer such as RepRap, Prusa i3, , MK10, CR-10 10S, Ender-3, Ramps 1.4 etc. Package Includes: 6Pieces repair fix tool 2Pieces tweezers 1Piece 1Piece cutting p

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealhop2 ultra-quiet technology is widely used in 3D printing. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 8729, lower heat, especially for 3D printing market. With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). colour: blue + white Material: aluminum alloy + PCB Package Contents: 5 X TMC2208 V1.2 Stepper Motor Driver 5 X Heat Sink 1 X ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features Brand new and high quality Size:22*22cm Color:as the pic Product Name: 3D printer thermal bed sheets, (This product is different from Ordinary material and thickness,with High-Quality, Company's Own Design and Production of Floor.There are Gold Version and Sandblasting Bright Silver Version) Note:Please leave message to tell us which type you need,or we will send Type A to you Package included: 1x MK2/MK3 support

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealhop2 ultra-quiet technology is widely used in 3D printing. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 8729, lower heat, especially for 3D printing market. With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). colour: blue + white Material: aluminum alloy + PCB Package Contents: 5 X TMC2208 V1.2 Stepper Motor Driver 5 X Heat Sink 1 X ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

The box type bearing ule is adopted to ensure the stable operation of the printing head to the greatest extent. At the same time, on the premise of ensuring the stability, the design is simplified as far as possible, and the weight of the printing head mounting seat is reduced to the maximum extent. It is made of 3mm aluminum alloy with sandblasting and oxidation treatment on the surface, which has more texture. Suitable for reprip prusa I3 3D printer with 45 mm shaft spacing Fine workmanship and perfect style Easy and convenient to install and remove Suitable for: 3D printer Reprap Prusa i3 Colour:Sier Material:Aluminum alloy Package Contents: 1* mounting baseOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Material: Rubber PU Product Name: 2GT Synchronization Belt Specification: Bandwidth 6 mm Product Usage: Small Precision Mechanical Drive Packing

☂☂Welcome to {tweettwehhuj}, your support is our greatest driving force, we will definitely give you the most comfortable shopping experience!!!☂☂ Features Brand new and high quality Size:22*22cm Color:as the pic Product Name: 3D printer thermal bed sheets, (This product is different from Ordinary material and thickness,with High-Quality, Company's Own Design and Production of Floor.There are Gold Version and Sandblasting Bright Silver Version) Note:Please leave message to tell us which type you need,or we will send Type A to you Package included: 1x MK2/MK3 support

Powerful motor-with NEMA 17 stepper motor, it has the advantages of greater torque and heat accumulation. Insulation cotton-Hotend uses ceramic insulation cotton, which can be quickly and stably heated to high temperatures. Versatility-This kit is suitable for most prusa i3 3D printers. colour:yellow + black material:metal size:fan: 40 x 40 x 7mm heat sink: 40 x 40 x 11mm Package Contents: 1 x MK8 extruder Printer nozzle (0.2/0.3/0.4/0.5mm each)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

The box type bearing ule is adopted to ensure the stable operation of the printing head to the greatest extent. At the same time, on the premise of ensuring the stability, the design is simplified as far as possible, and the weight of the printing head mounting seat is reduced to the maximum extent. It is made of 3mm aluminum alloy with sandblasting and oxidation treatment on the surface, which has more texture. Suitable for reprip prusa I3 3D printer with 45 mm shaft spacing Fine workmanship and perfect style Easy and convenient to install and remove Suitable for: 3D printer Reprap Prusa i3 Colour:Sier Material:Aluminum alloy Package Contents: 1* mounting baseOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealhop2 ultra-quiet technology is widely used in 3D printing. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 8729, lower heat, especially for 3D printing market. With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). colour: blue + white Material: aluminum alloy + PCB Package Contents: 5 X TMC2208 V1.2 Stepper Motor Driver 5 X Heat Sink 1 X ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Powerful motor-with NEMA 17 stepper motor, it has the advantages of greater torque and heat accumulation. Insulation cotton-Hotend uses ceramic insulation cotton, which can be quickly and stably heated to high temperatures. Versatility-This kit is suitable for most prusa i3 3D printers. colour:yellow + black material:metal size:fan: 40 x 40 x 7mm heat sink: 40 x 40 x 11mm Package Contents: 1 x MK8 extruder Printer nozzle (0.2/0.3/0.4/0.5mm each)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Material: Rubber PU Product Name: 2GT Synchronization Belt Specification: Bandwidth 6 mm Product Usage: Small Precision Mechanical Drive Packing

The box type bearing ule is adopted to ensure the stable operation of the printing head to the greatest extent. At the same time, on the premise of ensuring the stability, the design is simplified as far as possible, and the weight of the printing head mounting seat is reduced to the maximum extent. It is made of 3mm aluminum alloy with sandblasting and oxidation treatment on the surface, which has more texture. Suitable for reprip prusa I3 3D printer with 45 mm shaft spacing Fine workmanship and perfect style Easy and convenient to install and remove Suitable for: 3D printer Reprap Prusa i3 Colour:Sier Material:Aluminum alloy Package Contents: 1* mounting baseOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

UPGRADE: Original Aluminum Drive Feed for Creality 3D Printers CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. STABLE and DURABLE: DIY kit and you need to assemble by yourself. Our kits include all the necessary screws & parts needed to directly replace your old original weak extruder. EASY TO INSTALL: All you do is unbolt the old original Creality extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame. ADVANTAGES: The advantages of a metal extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. This ified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament. Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments. Easy and convenient to use. With high quality and durable performance. 100% brand new and in good condition. colour: red Material: Aluminum Package Contents: 1x Creality 3D - Extruder Upgrade Kit Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: Name: 3D Printer Tool Kits Exquisite and compact, light and easy to design, easy to use. High-quality steel burin, sharp cut surface, easy to use. Stainless steel tweezers coated with conductive carbon black for antistatic effect. The scraper is made of high quality material, environmentally friendly, non-toxic, high hardness, tough, convenient to use, high temperature resistant. Applicable for most of 3D printer such as RepRap, Prusa i3, , MK10, CR-10 10S, Ender-3, Ramps 1.4 etc. Package Includes: 6Pieces repair fix tool 2Pieces tweezers 1Piece 1Piece cutting p

For prusa i3 mk3 3D Printer Quantity: 1 pc Colour: Black Material: metal + plastic Package Contents: 1* pinda v2 auto-leveling sensorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealhop2 ultra-quiet technology is widely used in 3D printing. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 8729, lower heat, especially for 3D printing market. With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). colour: blue + white Material: aluminum alloy + PCB Package Contents: 5 X TMC2208 V1.2 Stepper Motor Driver 5 X Heat Sink 1 X ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

The box type bearing ule is adopted to ensure the stable operation of the printing head to the greatest extent. At the same time, on the premise of ensuring the stability, the design is simplified as far as possible, and the weight of the printing head mounting seat is reduced to the maximum extent. It is made of 3mm aluminum alloy with sandblasting and oxidation treatment on the surface, which has more texture. Suitable for reprip prusa I3 3D printer with 45 mm shaft spacing Fine workmanship and perfect style Easy and convenient to install and remove Suitable for: 3D printer Reprap Prusa i3 Colour:Sier Material:Aluminum alloy Package Contents: 1* mounting baseOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

UPGRADE: Original Aluminum Drive Feed for Creality 3D Printers CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. STABLE and DURABLE: DIY kit and you need to assemble by yourself. Our kits include all the necessary screws & parts needed to directly replace your old original weak extruder. EASY TO INSTALL: All you do is unbolt the old original Creality extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame. ADVANTAGES: The advantages of a metal extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers' performance. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. This ified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer. Our design gives complete support of flexibles from the intake and output ends. We've reduced the price and complexity of printing flexibles. It will also allow to print faster with sustained quality and no risk for grinding the filament. Frankly, it looks amazing, and performs better than the plastic version included in stock printers. It allows you to print flexibles, and regular plastic filaments. Easy and convenient to use. With high quality and durable performance. 100% brand new and in good condition. colour: red Material: Aluminum Package Contents: 1x Creality 3D - Extruder Upgrade Kit Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For prusa i3 mk3 3D Printer Quantity: 1 pc Colour: Black Material: metal + plastic Package Contents: 1* pinda v2 auto-leveling sensorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

The timing belt is used to control the movement of the extrusion motor bracket, and the rotation motion of the motor is converted into the plane movement of the motor bracket by the cooperation with the components such as the pulley. When installing, you need to determine the length of the part according to the actual needs. When it is matched with the pulley and each gear, ensure that the meshing is tight and there is no looseness. Product list: GT2-6MM timing belt *1 Note: 1.Please allow a little size error due to manual measurement. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. Material: rubber Colour: Black Length: #1 5M #2 10M Pitch: 2mm Tooth width: 6mm GT2-6MM timing belt *1 GT2-6MM timing belt • If you wish to change details after you placed an order, please cancel the order within 30 minutes and place a new one. If you miss out the correct step your order will not be allowed to cancel order/change. • When received the parcel, please check before you click button "order received". • Please contact us if you have any concern before opening a dispute, give us an opportunity to resolve the pro