Làm mạch điều tốc

Mỡ Hàn Soldering Paste JYD Mỡ hàn JYD được dùng để vệ sinh mối hàn, làm bóng các mối hàn, sử dụng phổ biến khi hàn các loại ic dán, mỡ hàn YX18 là loại mỡ hàn có giá thành rẻ màu vàng và kết cấu đặc. Thông Số Kỹ Thuật: Model: JYD Xuất xứ: Trung Quốc Trọng lượng của mỡ hàn JYD: 100g Màu sắc: Màu vàng Nhiệt độ nóng chảy: 60 độ C Đặc Điểm Nổi Bật: Ph trung tính Chịu nhiệt cao, khả năng dẫn nhiệt tốt Không độc, không ăn mòn Bề mặt hàn mịn, không khô ----------------------- HOTLINE: 024.2021.4848 ZALO : 0987.988.041 Địa chỉ mua hàng tại Hà Nội: 28- Ngõ 106- Lê Thanh Nghị- Hai Bà Trưng- Hà Nội ----------------------- Linh Kiện Điện Tử 3M cam kết: Bán giá luôn cạnh tranh và dịch vụ sau mua giá tốt hơn so với thị trường. Cam kết hoàn tiền 100% khi sản phẩm sai quảng cáo,hoặc lỗi do nhà sản xuất. Cam kết Sản Phẩm giống ảnh Bảo hành đổi trả sản phẩm trong vòng 7 ngày Bảo hành sản phẩm trong vòng 7 tháng bằng hoá đơn mua hàng đi

Help: 100% new high quality pulse generator, this ule is provided as stepper drive signal, to control the stepper motor you also need to have a drive to use it. Application: The controller has three kinds of high, medium and low frequency signals that can be used to select jumpers, the measuring frequency can be two ports, PUL and common cathode (GND); PUL + and PUL pulse positive and negative; with EN + and EN- activate positive and negative terminals; DIR + and DIR- are positive and negative directions. These six lines are connected to drive the corresponding pulse in the direction, making six ports possible Power supply: 15-160 VDC or 5-12 VDC, if a 5-12 VDC power supply is used, the positive terminal will be connected to the 5-12 VDC input and the negative terminal will be connected to the common cathode terminal, press The button to control the forward and reverse of the motor, the speed of the motor can be controlled by adjusting the frequency of the potentiometer. HIGH QUALITY MATERIALS: Made of high quality materials, rustproof, wear-resistant, corrosion-resistant, cold-resistant, with a certain hardness, wear resistance, a certain impact resistance, durable, stable, non-trembling, collision is not easy to damage, good materials can extend the life of the product. Professional making: Factory uniform standards, fine shapes, professional making, perfect size, every piece has been strictly controlled.Perfect for replacing old or worn-out ones.Bring a whole new experience. Color: Green + Black Material: metal + plastic Size: 73 x 51 x 37mm Package contents: 1 x signal generator uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Hello, Being our follower could enjoy ₫8888 discount!! ------------------------------------------------------------------------------------------------------------------------------ Ready stock, fast shipping! Product details Product name:Dr.pen N2W(wireless) + 10pcs needles Machine Speed: 5 levels Color：Red and white Machine Material: ABS Input&output:AC 110V~240V Needle type: Bayonet / white Needle number: 1/3/5/7/9/12/36/42pins/round nano/5D nano/3D nano (if you choose Mixed needles,please leave a message) Features Easy operation Stable quality Light handpiece Portable Low cost consumable Package Included : 1* dr pen N2W and 10pcs needles extra 1* EU Plug 1* user manual 1* retail box #dr pen N2 #dr pen #derma stamp #micro needling machine #anti

IC Điều tốc xe máy điện cũ loại 9 mofet, từ 48v,công xuất 500 w,vẫn sử dụng tốt, dùng để chế đồ hoặc thay

___________________❀OOID'S❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ☞“Like” Items: Priority Shipping ( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Features: DC 9V 12V 24V 48V 60V DC Motor Speed Controller Motor Speed control and regulation in RC models, fans and more Small pump control, such as RS-360 motor Temperature control in devices such as soldering irons Brightness control of DC light bulbs Specifications: 100% brand new and high quality Operating Voltage: DC 9V-60V Rated Current: 10A Maximum Current: 20A Output Power: 0-1200W PWM Frequency: 25KHz Speed Range: 0-100% Speed Principle: Adjust the current Shell Material: Aluminum Alloy Size: 105mm*50mm*33mm Package includes: 1 x 9-60V 20A DC Motor Speed Control

[cheesenhbn]1Pc DC 6-90V 15A Motor Speed Controller Pulse Width PWM Speed Regulator Switch1Pc DC 6-90V 15A Motor Speed Controller Pulse Width PWM Speed Regulator Switch Description: Control the speed of a DC motor with this controller With reverse polarity protection, high current protection Working Voltage: DC 6V - DC 90V Control Power: 0.01 - 1000W (Maximum current 15A) Static Current: 0.005 A ( Standby ) PWM Duty Cycle: 0% -100% PWM Frequency: 16 KHz Size (L x W x H ): Approx. 64 x 59 x28mm Material: Plastic, metal Package Included: 1 x Motor Speed Contr

Description: Product type: tool Power requirement:10-50VDC Rated current: 60A (Maximum output current) Frequency: 15000HZ Control Motor Power: 0.01-3000W 12V: 720W(max), 24V: 1440W(max) 36V: 2160W(max), 50V: 3000W(max) Standby current: 0.04A Regulation range: 5-100% PCB Size: 122x87x32mm Packing list: 1 *Controller Notes: There might be a little color deviation due to different monitor settings and light, please kindly unders

【mingxuan】Automatic Temperature Control CPU Fan Speed DC Controller 12V PWM PC Board Features: 100% High quality and Brand new Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35°C 45°C ON OFF 40°C 55°C OFF ON 50°C 70°C ON ON 60°C 90°C When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package includes: 1pc x Speed controller 1pc x Temperature probe 1pc x B

🎉Hi~Click hashtag #KAWAYI💝STORE to Explore More Nice Items🎉 6V 12V 24V Digital Display LED DC Motor Speed Controller PWM Stepless Speed Control Switch This DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.  Features: Large 0.56 inch 3-digit LED display numbers for easier readings. A PWM speed controller, enables you to control the speed of DC motors smoothly. Wide range of working voltage: DC 6V-30V. The rotary knob can realize 0-100% adjustment, and display 0-100 on the screen. With case for better durability; high efficiency and low noise. Suitable for applications like fans, etc. providing nice adjustment of motor speed. Notice: 1. This speed controller is applicable to DC motor; it can't be be connected with DC voltage(e.g. 220V AC). 2. The anode and the cathode of DC power cannot be connected reversely, otherwise the controller will be damaged. 3. When running direction is inconsistent with your desire, you can change it by adjusting the linear order. 4. Potentiometer knob can change the output duty cycle of controller and then change the motor speed. Specifications: Working Voltage: DC 6V-30V Rated Current: 6A Max. Current: 8A Control Power: 6V*6A=36W, 12V*6A=72W,......30V*6A=180W PWM Frequency: 16KHz  Duty Cycle Adjustable: 0%-100% Item Size: 79 * 42 * 24mm / 3.11 * 1.65 * 0.94in Item Weight: 58g / 2.04oz Package List: 1 * DC Motor Speed Contro

Welcome to Fahuamaoyiing store, have a good shopping! ✈✈If some of the items you ordered are out, we will send the rest of items other items will be refunded (refund) ✈✈Follow us for info on DISCOUNTS and NEW GOODS! Specifications: Working Voltage: DC 5V-12V (MAX. 15V) Working Current: 1.5A (MAX. 2A) Maximum Rated Power: 15W Static Current: 0.005A (Stand by) PWM Duty Cycle: 10000 RPM Board Size: 30x25mm/1.18x0.98" Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Includes: 1 x DC Motor Drive Board -Benefits and services: ➡ All stocks on hand. ➡ All items in store are as stated in their descriptions and photos provided are actual taken. ➡ Offer products in great quality, 100% new condition, and reasonable low price. -After receiving an order: ➡ Open the pouch and check the items. If any item is wrong and you personally do not want to accept it, return them to the courier, and do not pay it. ➡ If the actual items you see somehow do not meet your expectation, we accept returns if items are not yet been used. ➡ If there is any damaged item, try to contact our service team in chat, and we will solve the problem . ➡ Please do not just leave us a negative feedback and a low rate without communicating with us. We will be always willing to deal with your concerns!!! ➡ If you are satisfied with our products and services, please kindly give us a positive feedback with 5 stars!!!! ➡ Introduce our store to your friends and let them follow us, and just notice us about that, then you will be provided with special next purchase. -Thank you so much for supporting and understanding!!!! (.◕‿◕.)Dear customer, welcome to Fahuamaoyiing shop ✈✈Coupons: Stores will provide different coupons based on the products you purchase. ✈✈If you have any questions before and after purchase, please feel free to contact us. We will try our best to solve your problem! ✈✈We will update s, please pay attention to our stores. ✈✈Enjoy shopping! Enjoy your

Parameter: DC motor controller operating voltage range is DC 9-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20 Celsius-40 Celsius. High-end Configuration: Our motor driver control board uses PWM ulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube. Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use. Low Quiescent Current: our speed regulation ule is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA). Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation; car motor speed regulation; production line conveyor belt speed regulation; electronic fan speed regulation etc. PWM duty ratio: 5%-100% PWM frequency: 15 kHz Applications: Universal DC brush motor speed regulation. Car motor speed regulation (car cooling fan speed regulation, car automobile fan speed regulation, car windshield motor speed regulation, car air conditioning fan speed regulation) Production line conveyor belt speed regulation, pipe exhaust fan speed regulation, treadmill speed control, multiple computer fans parallel speed regulation colour: red Material: plastic + metal size: 17x40x5cm Package Contents: 1 x Motor Speed Control BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Specifications: Working Voltage: DC 5V-12V (MAX. 15V) Working Current: 1.5A (MAX. 2A) Maximum Rated Power: 15W Static Current: 0.005A (Stand by) PWM Duty Cycle: 10000 RPM Board Size: 30x25mm/1.18x0.98" Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Includes: 1 x DC Motor Drive

Sorry for the inconvenience, i am sorry for you donot receive goods. i have shiped goods , but recently all world now has epidemic , most company move slowly , can you wait a week , if you still not receive , i can resend or full refund . if you donot want wait , i can refund now . sorry

Sorry for the inconvenience, i am sorry for you donot receive goods. i have shiped goods , but recently all world now has epidemic , most company move slowly , can you wait a week , if you still not receive , i can resend or full refund . if you donot want wait , i can refund now . sorry

【ITB】DC 6-28V 3A PWM Motor Speed Controller Regulator Speed Control SwitchDescription: This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-- Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load. Main technical parameters: - Input supply voltage:6V-28VDC - The maximum output power: 80W - The maximum continuous output current :3A - Duty Cycle adjustable:5%-100% -Size: (L*W) 5cm*3.2cm Quantity:1PC Operating instruction: 1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer. Package included: 1 x DC 6V - 28V 3A PWM Motor Speed Variable Regulator Controller S

Welcome to our shop, we provide high-quality and inexpensive Descriptions: 1. This module is a pulse generating module, which supplies stepping driver as signal. If you want to control the stepper motor, you must also have a motor driver.Frequency measurement: PUL and GND ports can be measured. 2. PUL+and PUL-are positive and negative of the pulse; EN+and EN-are positive and negative of the enabler; DIR+and DIR-are positive and negative of the direction. The six lines are connected to the six ports of the driver corresponding to the pulse, direction and enablement respectively. Note that the ENA enabler on the controller must be connected to the driver in both positive and negative ways if the function of turn-on or stop is to be used. 3. 2 groups of power input, 2 groups only need to connect to one group of power supply.One group is connected to DC 15-160VDC.The other group was 5-12 VDC. If it is powered by 5-12VDC, the power supply is positively connected to "5-12V in", and the power supply is negatively connected to "common negative end". Specifications: Power supply voltage: 15-160V/5-12V Frequency: high: 5.8KHZ-127KHZ, medium: 590HZ-15.8KHZ, low: 82HZ-2.3KHZ Quantity: 1pc Product size: 73*51*37mm/2.87*2.01*1.46" Material: plastic Note: If you use start or stop functions, ENA controller enabled terminals must be connected to common cathode or common anode drives. Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow slight measuring deviation due to manual measurement. Included: 1 XPWM Pulse Signal Gene

Welcome to Inthespring store, have a good shopping! Specifications: Voltage:DC 5V-16V Continuous Current: 10A Short maximum current: 20A (less than 10 seconds) Speed control mode: PWM stepless speed regulation, can also be used to adjust the light Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed) Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left). When the current is switched on, the 0.002A (long time no need to switch off the governor is no current). Efficiency: the maximum efficiency is as high as 98%. Volume: long 3cm (excluding potentiometer), wide 2cm, high 1.4cm If you are using the speed control (dimming) to do the product, the shop can provide free Custom service, can be in accordance with the requirements of the customer to modify the shape of the circuit board, installation Mode, current and voltage parameters, add other functions, etc.. Note that the governor is mainly used in motor speed control, if you are used to LED dimming, must ensure that the LED can also work in direct power supply, the dimming range of the speed governor is from LED to LED directly connected to the power supply is completely extinguished between dimming, if LED is directly connected with a power that will burn through dimmer the dimming is burned, which typically requires a series current limiting resistor, if you don't know how much resistance can contact customer service. Package Included: 1 x DC Motor Speed Controller 💋Dear Customers,GOOD NEWS !!! if you were the first purchase time in shopee,can use voucher 🌟ALL products are in stock 🌟 PRE-Shipment Inspection 🌟 WELL-PACKED parcel 🔥Faster Delivery(2 Day Shipped Out,About 5-14 Days Arrived You!) 🔥The Latest Products(Elaborately Select Out Newest & Popular & Useful Produ

Features: 100% High quality and Brand new Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35℃ 45℃ ON OFF 40℃ 55℃ OFF ON 50℃ 70℃ ON ON 60℃ 90℃ When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package includes: 1pc x Speed controller 1pc x Temperature probe 1pc x B

Name: YF-19 controller + driver / Name: YF-19 controller Colour: Black Material: Plastic Package Contents: 1 x YF-19 controller 1 x driver / 1 x YF-19 controller<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

If you have any problem about our product or the purchased order,just feel free to contact us,all the emails will be processed within 24 hours,except weekend. Description: This DC Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of3A to your DC motor or other DC load. Operating instruction: 1. Connect your DC motor (or DC load) to the motor terminals as indicated on the wiring diagram. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer. Main technical parameters: Input supply voltage:6V-28VDC The maximum output power: 80W The maximum continuous output current :3A Duty Cycle adjustable:5%-100% Package Included: 1x DC 6V 12V 24V 28V 3A PWM Motor Speed Control Switch Controller 1.Due to the manual measurement and different measurement methods, the actual size could be slightly different. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. Before any purchase pls check carefully about the detail information of the pruduct. #6V #Speed #Motor #PWM #Controller #3A #28V #Control #Board #24V #Switch #12

Specifications: Working Voltage: DC 5V-12V (MAX. 15V) Working Current: 1.5A (MAX. 2A) Maximum Rated Power: 15W Static Current: 0.005A (Stand by) PWM Duty Cycle: 10000 RPM Board Size: 30x25mm/1.18x0.98" Quantity: 1 Pc Package Includes: 1 x DC Motor Drive

Pwm dc motor speed controller 6v-28v 3a. Dc led regulator dimmer Description Power on / off. To adjust the speed of the motor dynamo so that it can slow down. When applied to the led light, the light is dimmed. It can be applied to motor dynamo, mini drill, mini drill, mini grinder, fan, led light or other creative ideas. Specs: - dc 6v-28v input voltage - current output: 0-3a. - power: 80w (maximum) - pwm duty cycle: 5% - 100% - size: (Without handle) Note: Power inputs can 't be reversed, if the power output to the dynamo motor doesn' t matter because it just changes the direction of the

1. Control board drive voltage: 18V (5 strings of lithium batteries, fully charged 21V), power 300W. 2. The battery pack marked with 48V, 68V, 88V, 98V, 128VF or TV can be used, and its voltage is actually 18V (5 series 2 parallel 10 cells or 5 series 3 parallel 15 lithium batteries, fully charged 21V) . 3. If you do not purchase a switch, please make sure that the switch is a good 8-wire brushless switch to avoid delay in use. 4. Before testing the machine, you must first connect the wire---fix the motor---install the case---tighten the screw---make sure that the square shaft of the head can be easily rotated without jamming---connect the power supply--- Press down the speed control switch so that there is no space in the shell! Otherwise, there may be a buzzing alarm! Do not follow the requirements, if the driver board is damaged, please bear it yourself! Colour:black Material:plastic Size:63 x 52 x 8mm Package Contents: 1 * Driver boardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

【TINHJ】Automatic Temperature Control CPU Fan Speed DC Controller 12V PWM PC BoFeatures: 100% High quality and Brand new Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35℃ 45℃ ON OFF 40℃ 55℃ OFF ON 50℃ 70℃ ON ON 60℃ 90℃ When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package includes: 1pc x Speed controller 1pc x Temperature probe 1pc x B

Help: 100% new high quality pulse generator, this ule is provided as stepper drive signal, to control the stepper motor you also need to have a drive to use it. Application: The controller has three kinds of high, medium and low frequency signals that can be used to select jumpers, the measuring frequency can be two ports, PUL and common cathode (GND); PUL + and PUL pulse positive and negative; with EN + and EN- activate positive and negative terminals; DIR + and DIR- are positive and negative directions. These six lines are connected to drive the corresponding pulse in the direction, making six ports possible Power supply: 15-160 VDC or 5-12 VDC, if a 5-12 VDC power supply is used, the positive terminal will be connected to the 5-12 VDC input and the negative terminal will be connected to the common cathode terminal, press The button to control the forward and reverse of the motor, the speed of the motor can be controlled by adjusting the frequency of the potentiometer. HIGH QUALITY MATERIALS: Made of high quality materials, rustproof, wear-resistant, corrosion-resistant, cold-resistant, with a certain hardness, wear resistance, a certain impact resistance, durable, stable, non-trembling, collision is not easy to damage, good materials can extend the life of the product. Professional making: Factory uniform standards, fine shapes, professional making, perfect size, every piece has been strictly controlled.Perfect for replacing old or worn-out ones.Bring a whole new experience. Color: Green + Black Material: metal + plastic Size: 73 x 51 x 37mm Package contents: 1 x signal generator uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Note: our products only provide product information or details, without technical support, buyers need to understand, thank you for your cooperation Working voltage 9v - 60v (universal) output voltage load linear Continuous current 10 control current 0-10a Speed control range 0% -. Speed regulating potentiometer Speed regulation principle adjustable current potentiometer opening 7mm Size long (excluding ear 92mm) wide 52mm high 36mm product net weight 132g Wiring mode Red line connection: power supply positive+black line connection: power supply negative - Blue line connection: motor positive+yellow: motor negative - Input positive or negative connection is not working.Input with antipolar prote

Description: DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Suitable for the DC motor (or DC load) within 20A. Adjustable speed range is from 0%-100%. Specifications: Item Size: 4.14*1.97*1.3&quot; Input Supply Voltage: 9V-60V DC(Max) Rated Current: 10A Max. Current: 20A PWM Frequency: 25kHz; Duty Cycle Adjustable: 5%-100% Potentiometer with adjust speed swtich function,and button swtich function. Potentiometer cable length 0.79&quot;,Button swtich cable length:0.79&quot;. The item with metal shell and connective label,very easy to install and use. Operating instruction: Before you attempting to wire the controller, make sure power is off. -Connect wires refer to the &quot;wiring diagram&quot; -Turn on the power. -Adjust the potentiometer. Package Included: 1 * DC Motor Speed Controller With Metal Shell WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER. TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF M

## Specifications: Input voltage: DC9-60V Output voltage: Linear load Output current: 0-20A Continuous power: 12600W Speed regulating type: adjust flow Speed mode: potentiometer (linear) Speed range: 0-100% Control frequency: 25KHZ Forward reversal: support Suitable for motor: DC brush Potentiometer mounting hole: 7mm Product size: approx. 92*50*36mm/3.62*1.96*1.41'' Net weight: approx. 145g Center distance: approx. 104mm Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Included: 1 x PWM Contr

Name: YF-19 controller + driver / Name: YF-19 controller Colour: Black Material: Plastic Package Contents: 1 x YF-19 controller 1 x driver / 1 x YF-19 controller<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Name: YF-19 controller + driver / Name: YF-19 controller Colour: Black Material: Plastic Package Contents: 1 x YF-19 controller 1 x driver / 1 x YF-19 controller<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1