Wifi nec

Thương hiện buffalo và Nec đến từ nội địa nhật bản. - Băng thông rộng cho phép nhiều người truy cập. - Mang lại sự ổn định cao. - An toàn cho sức khỏe - Router nec 9500 đạt sự ổn định và cực kì trâu bò - Router Nec wr8700n made in japan - Nec WR8165N nhỏ gọn như bao thuốc lá mà có khả năng vừa thu vừa phát Phiên bản Buffalo WHR-1166DHP chuẩn AC đời mới đem lại băng thông tốt cho cty và quán

Description: 100% Brand New And High Quality PCI bus-master access Hot-pluggable: allows plug and play connectivity Enhanced speeds: data moves up to 480Mbits/sec (Mb/s) High-speed (480Mbps), full-speed (12Mbps) and low-speed (1.54Mbps) data transfer rate Reliability: complies with OHCI, EHCI and PCI standard Compatibility: supports USB 1.1 and 2.0 under Windows 98 SE, Me, 2000 and XP Via Chipset USB 2.0 5 Port (4 Eeternal Port+ 1 Internal Port) PCI Card Supports Up to 127 devices Supports Device hot swap and wake-up Support All USB-compliant devices Support Microsoft Windows 98, ME, 2000, XP,Vista Operating System Support System:Vista,Windows ME/XP/2000/98 /SE Compliant with: Universal Serial Bus Specification Revision 2.0 Open Host Controller Interface Specification for USB Rev 1.0a Enhanced Host Controller Interface Specification for USB Rev 0.95 32-bit 33MHz host interface compliant to PCI Specification release 1.1 Specifications: Enhanced speeds: data moves up to 480Mbits/sec (Mb/s) High-speed (480Mbps), full-speed (12Mbps) and low-speed (1.54Mbps) data transfer rate Reliability: complies with OHCI, EHCI and PCI standard Compatibility: supports USB 1.1 and 2.0 under Windows 98 SE, Me, 2000 and XP Via Chipset USB 2.0 5 Port (4 Eeternal Port+ 1 Internal Port) PCI Card Supports Up to 127 devices Package Included: 1x USB 2.0 PCI Controller Card Ad

1. NEC720201 is a single-chip USB 3.0 host controller that enables PCI Express-equipped platforms to interface devices with USB SuperSpeed ??(5Gbps), High Speed ??(480Mbps), Full Speed ??(12Mbps), and Low Speed ??(1.5Mbps) 2. Single lane (x1) PCI Express throughput rate up to 2.5Gbps 3. Support running multiple USB 3.0, USB 2.0 and USB 1.1 devices at the same time, supporting 4 downstream ports to achieve all speeds 4. Built-in 15-pin SATA power connector for receiving additional power from the system 5. The hot swap function allows you to connect / disconnect the device without turning off the system power 6. Users can easily connect the mass storage devices, printers, scanners, hubs, cameras and any other USB devices to be used 7. Compliant with PCI Express Basic Specification Revision 2.0, and Universal Serial Bus 3.0 Specification Revision 1.0 8. Support Win 10 / Win 8 / Win 7 / Vista / XP / 2000 / ME / 98SE / Server2003-2008 32 / 64-bit, Linux, DOS Name: USB3.0 4-port expansion card Bus type: PCI Express Revision 2.0, single channel (X1) Main chipset: NEC720201 Media interface: 4*USB 3.0 port 1*15 pin SATA interface Transmission rate: low speed (1.5Mbps) / full speed (12Mbps) / high speed (480Mbps) / overspeed (5Gbps) colour:green Material:ABS + Metal size:Motherboard size: 69*69mm Package Contents: 1* USB3.0 4 Port Expansion CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. NEC720201 is a single-chip USB 3.0 host controller that enables PCI Express-equipped platforms to interface devices with USB SuperSpeed ??(5Gbps), High Speed ??(480Mbps), Full Speed ??(12Mbps), and Low Speed ??(1.5Mbps) 2. Single lane (x1) PCI Express throughput rate up to 2.5Gbps 3. Support running multiple USB 3.0, USB 2.0 and USB 1.1 devices at the same time, supporting 4 downstream ports to achieve all speeds 4. Built-in 15-pin SATA power connector for receiving additional power from the system 5. The hot swap function allows you to connect / disconnect the device without turning off the system power 6. Users can easily connect the mass storage devices, printers, scanners, hubs, cameras and any other USB devices to be used 7. Compliant with PCI Express Basic Specification Revision 2.0, and Universal Serial Bus 3.0 Specification Revision 1.0 8. Support Win 10 / Win 8 / Win 7 / Vista / XP / 2000 / ME / 98SE / Server2003-2008 32 / 64-bit, Linux, DOS Name: USB3.0 4-port expansion card Bus type: PCI Express Revision 2.0, single channel (X1) Main chipset: NEC720201 Media interface: 4*USB 3.0 port 1*15 pin SATA interface Transmission rate: low speed (1.5Mbps) / full speed (12Mbps) / high speed (480Mbps) / overspeed (5Gbps) colour:green Material:ABS + Metal size:Motherboard size: 69*69mm Package Contents: 1* USB3.0 4 Port Expansion CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1.NEC720201 Type-C + A is a dual-port super-speed PCI-E USB3.1 add-in card, dual external USB3.1 Super-Speed ??+ Type-A ports on the expansion system, in line with PCI-E 2nd generation (single channel x1) specification 2. When connected to a USB 3.1 compliant peripheral device, it can transfer data at up to 10Gbps while maintaining compatibility with existing USB peripheral devices 3. USB3.1 performance is 2 times faster than USB3.0, and connection speed is 20 times faster than USB2.0 connection. It can output effective power to USB devices without additional power adapter connection 4. Support to run multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices at the same time, support USB data transfer rate of 10G / 5G / 480/12 / 1.5 Mbps, users can easily connect the mass storage device to be used, printer, scan Instruments, hubs, cameras and any other USB devices 5. Each USB port provides a maximum + 5V DC / 900mA power output to the USB device, and each USB port has a built-in overcurrent protection function 6. Support remote wake-up function of the device via USB keyboard or mouse, hot-swap function allows to connect / disconnect the device without turning off the system power 7. Support Windows Server2003 / Vista / Win 7 / Win 8 / Win 8.1 / Server2012 R2 x64 (32 & 64bit), one available PCI Express x4 or x16 slot (recommended PCI Express 2.0) Name: 2 port expansion card Bus type: PCI-E rev2.0, single channel x1-Lane, Serial ATA rev3.1 Gen2 Main chipset: NEC720201 Media interface: 1*USB Type-C port 1*USB Type-A port 1*15-pin SATA connector Transmission rate: super high speed + (10Gpbs), super high speed (5Gpbs), high speed (480Mbps), full speed (12Mbps), low speed (1.5Mbps) Compatible devices: Universal Serial Bus USB3.1 / USB3.0 / USB2.0 / USB1.1 IRQ & IO: assigned by the system Working temperature: 0 ~ 60 ° C (32 ~ 140 ° F) Working humidity: 5% ~ 95% RH Storage temperature: -20 ~ 70 ° C (-4 ~ 158 ° F) Motherboard size: 94*61mm colour:green Material:ABS + Metal Package Contents: 1 * 2 Port Expansion Card Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dual USB 3.0 output provides fast data transfer rate up to 5Gbps that is much higher than USB2.0. Green PCB plate ensures high stability of electrical performance. Features: Dual USB 3.0 output ensures fast transfer rate up to 5Gbps that is much higher than USB2.0. Generation lll NEC720202 main control chip delivers high stability, wide compatibility and increases data read and write speed by 10 times. Built-in SATA power supply interface ensures that the USB 3.0 external device is fully powered, and meet the USB 3.0 5V 900mA standard output. Converts two USB 3.0 ports from the motherboard PCIE slot. With power supply module, enables to plug in the motherboard. No external power supply required. Interface protection chip allows to automatic power off to protect your computer and peripherals in the case of short-circuit / over-current / over-voltage and other emergency situations. Specification: Item: Expansion Card Main Control Chip: NEC720202 Item Size: 120 * 67 * 18.5mm / 4.7 * 2.6 * 0.7inch (L * W * H) Item weight: Approx. 38g / 1.3oz Package Size:  14.6 * 12.5 * 2.4cm / 5.7 * 4.9 * 0.9inch (L * W * H) Package weight: 74g / 2.6oz Package Include: 1 * Expansion Card 1 * Bag of S

PCI-E to Dual USB3.0 Ports Expansion Card PCI Express Adapter NEC D720201 Main Control Chip For Desktop PC with 19 PIN Features: The expansion card allows the motherboard to transfer PCI-E to four USB3.0 high-speed data transmission interfaces, designed as two rear interfaces and two front interfaces. Adopt NEC D720201 USB3.0 main control, which supports expansion of 4 USB3.0 interfaces, low power consumption, high performance and reliable operation. Expands 4 external USB3.0 super high speed interfaces, compatible with USB3.0, USB2.0 and USB1.1 devices.  Compliant with PCI express 2.0 specification. Works greatly for Windows XP/Vista/Win7/Win8/ Win10, etc. Independent solid-state capacitor for each USB port ensures the stable electrical properties of each USB port, high temperature resistance and longer service life. With four-phase power supply module, four 12mm closed super high power inductor. Each interface is equipped with an independent fuse, which enables to cut off the power to protect the peripherals and the computer from damages in the case of short-circuit, overcurrent, etc., and to be auto recovered when faults remove. Hole at the bottom for better heat dissipation. Specification: Item: Expansion Card Model: PCIE-U304S+ Main Control Chip: NEC D720201 Support System: For Windows XP/Vista/Win7/Win8/ Win10, etc. Item Size: 12 * 8 * 6.5cm / 4.7 * 3.1 * 2.6inch (L * W * H) Item weight: Approx. 49g / 1.7oz Package Size: 14.8 * 12.5 * 2.4cm / 5.8 * 4.9 * 0.9inch (L * W * H) Package weight: 102g / 3.6oz Package Include: 1 * Expansion Card 1 * Bag of Screws 1 * Driv

1. NEC720201 + RTL8153 is a dual-chip USB3.0 + LAN PCI Express host control expansion card 2. Equipped with a Gigabit network, interface and 2 USB3.0 sockets, can support 2 USB devices to work at the same time. The laptop can be connected to Internel via LAN 3. USB can be connected to devices such as mouse and keyboard, mobile hard disk, printer, etc. The product comes with a driver CD, which is simple to install and has strong compatibility 4. Compliant with PCI Express Basic Specification Revision 2.0, Universal Serial Bus 3.0 Specification Revision 1.0, backward compatible with USB 2.0 and PCI-Express 1.0 5. Built-in 4-pin and 15-pin SATA power connectors for additional power supply, fully compatible with plug and play and hot plug 6. Each USB 3.0 port has a 5V / 900mA power output 7. Fully compliant with IEEE802.3, IEEE802.3u, IEEE802.3az 8. Support full-duplex flow control, support online wake-up and remote wake-up 9. Support 10/100 / 1000M data auto-negotiation, integrated 10/100 / 1000M transceiver LED light 10. USB3.0 bandwidth is up to 5Gbps, users can enjoy Gigabit network onboard hardware driver through RJ45 interface, easy to use Specification: Name: PCIe USB3.0 + Gigabit RJ45 LAN host control expansion card Bus type: PCI-E X1 * rev2.0 Main controller: NEC720201 + RTL8153 Media interface: 2*USB3.0 port 1*Gigabit RJ45 LAN port 1*4-PIN power connector 1*15-PIN SATA connection port Transmission rate: USB3.0, low speed (1.5Mbps) / full speed (12Mbps) / high speed (480Mbps) / overspeed (5Gbps) RJ45 Ethernet: 10/100 / 1000Mbps (adaptive) Colour: green Material: ABS + metal Size: 76 * 80mm Package Contents: 1 * Expansion CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dual USB 3.0 output provides fast data transfer rate up to 5Gbps that is much higher than USB2.0. Green PCB plate ensures high stability of electrical performance. Features: Dual USB 3.0 output ensures fast transfer rate up to 5Gbps that is much higher than USB2.0. Generation lll NEC720202 main control chip delivers high stability, wide compatibility and increases data read and write speed by 10 times. Built-in SATA power supply interface ensures that the USB 3.0 external device is fully powered, and meet the USB 3.0 5V 900mA standard output. Converts two USB 3.0 ports from the motherboard PCIE slot. With power supply module, enables to plug in the motherboard. No external power supply required. Interface protection chip allows to automatic power off to protect your computer and peripherals in the case of short-circuit / over-current / over-voltage and other emergency situations. Specification: Item: Expansion Card Main Control Chip: NEC720202 Item Size: 120 * 67 * 18.5mm / 4.7 * 2.6 * 0.7inch (L * W * H) Item weight: Approx. 38g / 1.3oz Package Size:  14.6 * 12.5 * 2.4cm / 5.7 * 4.9 * 0.9inch (L * W * H) Package weight: 74g / 2.6oz Package Include: 1 * Expansion Card 1 * Bag of S

1.NEC720201 Type-C + A is a dual-port super-speed PCI-E USB3.1 add-in card, dual external USB3.1 Super-Speed ??+ Type-A ports on the expansion system, in line with PCI-E 2nd generation (single channel x1) specification 2. When connected to a USB 3.1 compliant peripheral device, it can transfer data at up to 10Gbps while maintaining compatibility with existing USB peripheral devices 3. USB3.1 performance is 2 times faster than USB3.0, and connection speed is 20 times faster than USB2.0 connection. It can output effective power to USB devices without additional power adapter connection 4. Support to run multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices at the same time, support USB data transfer rate of 10G / 5G / 480/12 / 1.5 Mbps, users can easily connect the mass storage device to be used, printer, scan Instruments, hubs, cameras and any other USB devices 5. Each USB port provides a maximum + 5V DC / 900mA power output to the USB device, and each USB port has a built-in overcurrent protection function 6. Support remote wake-up function of the device via USB keyboard or mouse, hot-swap function allows to connect / disconnect the device without turning off the system power 7. Support Windows Server2003 / Vista / Win 7 / Win 8 / Win 8.1 / Server2012 R2 x64 (32 & 64bit), one available PCI Express x4 or x16 slot (recommended PCI Express 2.0) Name: 2 port expansion card Bus type: PCI-E rev2.0, single channel x1-Lane, Serial ATA rev3.1 Gen2 Main chipset: NEC720201 Media interface: 1*USB Type-C port 1*USB Type-A port 1*15-pin SATA connector Transmission rate: super high speed + (10Gpbs), super high speed (5Gpbs), high speed (480Mbps), full speed (12Mbps), low speed (1.5Mbps) Compatible devices: Universal Serial Bus USB3.1 / USB3.0 / USB2.0 / USB1.1 IRQ & IO: assigned by the system Working temperature: 0 ~ 60 ° C (32 ~ 140 ° F) Working humidity: 5% ~ 95% RH Storage temperature: -20 ~ 70 ° C (-4 ~ 158 ° F) Motherboard size: 94*61mm colour:green Material:ABS + Metal Package Contents: 1 * 2 Port Expansion Card Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. NEC720201 + RTL8153 is a dual-chip USB3.0 + LAN PCI Express host control expansion card 2. Equipped with a Gigabit network, interface and 2 USB3.0 sockets, can support 2 USB devices to work at the same time. The laptop can be connected to Internel via LAN 3. USB can be connected to devices such as mouse and keyboard, mobile hard disk, printer, etc. The product comes with a driver CD, which is simple to install and has strong compatibility 4. Compliant with PCI Express Basic Specification Revision 2.0, Universal Serial Bus 3.0 Specification Revision 1.0, backward compatible with USB 2.0 and PCI-Express 1.0 5. Built-in 4-pin and 15-pin SATA power connectors for additional power supply, fully compatible with plug and play and hot plug 6. Each USB 3.0 port has a 5V / 900mA power output 7. Fully compliant with IEEE802.3, IEEE802.3u, IEEE802.3az 8. Support full-duplex flow control, support online wake-up and remote wake-up 9. Support 10/100 / 1000M data auto-negotiation, integrated 10/100 / 1000M transceiver LED light 10. USB3.0 bandwidth is up to 5Gbps, users can enjoy Gigabit network onboard hardware driver through RJ45 interface, easy to use Specification: Name: PCIe USB3.0 + Gigabit RJ45 LAN host control expansion card Bus type: PCI-E X1 * rev2.0 Main controller: NEC720201 + RTL8153 Media interface: 2*USB3.0 port 1*Gigabit RJ45 LAN port 1*4-PIN power connector 1*15-PIN SATA connection port Transmission rate: USB3.0, low speed (1.5Mbps) / full speed (12Mbps) / high speed (480Mbps) / overspeed (5Gbps) RJ45 Ethernet: 10/100 / 1000Mbps (adaptive) Colour: green Material: ABS + metal Size: 76 * 80mm Package Contents: 1 * Expansion CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

♠ Welcome To HeavenConnotationJr ♠ Specification: 100% Brand new and high quality Type: SF139E Material: Metal Rated current:10A Rated voltage: 250V Rated functional temperature: 142°C Package included： 5 x SF139E SEFUSE Cutoffs NEC Thermal