Tft lcd arduino

Description: 100% brand new and high quality Material: Electrical components Color: See pictures This is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility. It integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy. With GPRS module, you can design your Arduino phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images. And touch controlling is available; Compatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo Touch screen type: resistive touchscreen. Touch Pen: length is 9cm; Resolution: 240X400; Display size: 3.2 inch; Operating voltage: 5V; Logic level: 5V / 3.3V; On-board 3.3V / 300mA regulator circuit; Operating current: the maximum is 150mA Use the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 / D1 / D2 / D3 is available, please refer to the product schematics for the details. Onboard Micro SD slot, support Micro SD / TF Card; Onboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor Size: 9*5.3cm/3.54"*2.09" Download ip:http://www.winddeal.net/image2/tools/1A0847.rar Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Shield 1 x Touc

Features Support Arduino Mega2560 Directly inserted OnBorad level conversion chip for 5V/3.3V MCU Compatible with 3.3/5V operation voltage level Compatible with Arduino-Series development Board Compatible with UTFT / UTFT_Buttons /Utouch Library for arduino Provided 12-examples with Arduino ,3-examples with STM32? With SD Card Socket With SPI FLASH circuit Specifications: Input Voltage: DC 3.3-5.5V Screen Size: 3.5" Screen Material: TFT Resolution: 320X480 Drive IC: ILI9486 Interface mode: parallel 8 bit Module Pin: 28Pin (8+8+6+6) Touch: No Module Size: 55x85mm/2.17x3.35" Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Includes: 1 x 3.5 Inch TFT LCD Screen M

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic (UNO/Duemilanove/Diecimila). This shield does NOT work with the Mega but its going to be half the speed of the Uno-type boards because of the way the Mega rearranges all the pins (there is no way to get around this!) This shield is not Leonardo-compatible Description: Spice up your project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4 inch diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. color: red Material: comprehensive material Technical Details: 2.4 inch diagonal LCD TFT display 240x320 resolution, 18-bit (262,000) color spfd5408 controller with built in video RAM buffer 8 bit digital interface, plus 4 control lines Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD Works with any '328 or Mega (Leonardo not supported yet) 5V compatible! Use with 3.3V or 5V logic Onboard 3.3V 300mA LDO regulator 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control 4-wire resistive Press screen Package Contents: 1* 2.4 inch TFT LCD screen 1* Press PenOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Tương thích với Arduino R3 và Mega 2650 Chi Tiết kỹ thuật: 2.4 "đường chéo LCD TFT hiển thị 240x320 độ phân giải, 18-bit (262,000) màu sắc Spfd5408 điều khiển với xây dựng trong RAM video đệm 8 bit giao diện kỹ thuật số, cộng với 4 đường điều khiển Sử dụng kỹ thuật số chân 5-13 và analog 0-3. Điều đó có nghĩa là bạn có thể sử dụng kỹ thuật số chân 2, 3 và analog 4 và 5. pin 12 là có sẵn nếu không sử dụng các microSD Làm việc với bất kỳ '328 hoặc Mega (Leonardo không được hỗ trợ chưa) 5 v tương thích! Sử dụng với 3.3 v hoặc 5 v logic Onboard 3.3 v 300mA LDO điều chỉnh 4 trắng đèn nền LED. Trên theo mặc định nhưng bạn có thể kết nối các bóng bán dẫn kỹ thuật số pin cho điều khiển đèn nền 4-dây điện trở màn hình cả

Hello everyone, we are Reland Tech, we are mainly engaged in electronic components, electronic tools, bakery products. Customers can contact us for more product information. If there is any dissatisfaction, you can leave us a comment. We will actively correct, of course, thank you for your sincere evalua

100% brand new and high quality This is a 2.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult. With GPRS module, you can design your Arduino phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images. Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo) Specifications: Material: Electrical components Arduino library: UTFT Driver IC: ILI9225，ILI9220，S6D1121，ST7775，ST7735, S6D1121 Touch screen type: resistive touchscreen Touch Pen: length is 9cm Resolution: 176x220, 16-bit (262,000) color Display size: 2.0 inch Operating voltage: 3.3V Logic level: 3.3V Operating current: the maximum is 150mA LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor Download ip:http://www.winddeal.net/image2/tools/1A0850.rar Quantity: 1Pc Note: Pictures are for reference only, driver IC are random delivery, please refer to the product you received Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Module 1 x Touc

Description: 3.5inch TFT LCD Module, Resolution 480x320 Designed with a TF(Micro SD) card socket on the back of board so that you can conveniently insert a card. Support touch screen function. It is used to repair faulty screen: display problems, dead pixels, cracked LCD screens, wrong color issues. Highly recommend professional installation. Specification: Size: 3.5" Screen material: TFT Resolution: 320X480 Drive IC:ILI9481 Interface mode: parallel 8 bit Module pin: 8+8+6+6 Module size: Approx. 55x 83mm/ 2.17x 3.27inch Touch: Yes Package Includes: 1 Piece 3.5 inch TFT LCD Screen S

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày ______________ ♤ Chào mừng cửa hàng Superparis ♤ _______________ ✔Hàng có sẵn !! Hãy mua ngay! ✔ Chất lượng được kiểm chứng ✔ Giá tốt nhất ✌ (Lưu ý: Chúng tôi sẽ dựa trên quốc gia của bạn để gửi phích cắm bộ chuyển đổi tương ứng) ➷ Các nhà bán lẻ, bán sỉ luôn được hoan nghênh hợp tác với chúng tôi lâu dài! __________________ ❀Thông tin sản phẩm❀ __________________ Đặc trưng: 1. Màn hình LCD 3,5 inch 480x320 TFT, hiển thị hình ảnh chất lượng cao và góc nhìn rộng. 2. Được trang bị ổ cắm thẻ SD và SPI Mạch FLASH. 3. Hỗ trợ cấp 12 mẫu dành cho Arduino và 3 Chẳng hạn như model STM32. 4. Dành cho bo mạch lập trình Arduino UNO & MEGA 2560. 5. Tương thích với UTFT / UTFT_Buttons / Utouch Library. Mô tả sản phẩm: Tùy chọn: Với bảng điều khiển bằng cảm ứng, không cảm ứng Điện áp đầu vào: DC 2,8 ~ 3,3V IC Drive: ILI9486 / ILI9488L Kích thước màn hình: 3.5in Chất liệu màn hình: TFT Độ phân giải: 320x480 Loại mô-đun pin: 28 pin (8 + 8 + 6 + 6) Chiều dài bút cảm ứng: 8,8cm / 3,46in Kích thước mô-đun: 8.5 * 5.5cm / 2.17 * 3.35in Khối lượng: Khoảng 55g / 1.9oz Gói hàng bao gồm: 1 * Màn hình LCD với Bảng điều khiển cảm ứng 1 * Bút cảm ứng hoặc là 1 * Màn hình LCD không có bảng điều khiển cảm ứng (Tùy bạn chọn) Lưu ý 1. Do chênh lệch cài đặt ánh sáng và màn hình, màu sắc sản phẩm có thể hơi khác so với hình ảnh. 2. Do đo lường thủ công, mong bạn vui lòng cho phép sai số nhỏ. Cảm ơn bạn nhiều. #DisplayModule #LCDDisplay #LCDModule #TFTLCDDisplay #TFTLCDM

Features: 16-bit True Color RGB display Support a variety of configuration controls: button controls, progress bar controls, text controls, pointer controls With font: You can customize any WINDOWS font Support basic GUI instructions (drawing, drawing, drawing rectangle, etc.) Support picture format BMP, JPG, JPEG, PNG Support the host software automatically upgrade, the device firmware automatically upgrade 100-level backlight dimming, sleep mode, sleep current 20MA, support for wake-up function. Support serial download and SD card download two ways to support PC-side analog debugging, support simulator and equipment synchronization debugging Note: The LCD screen is Chinese version, buying carefully if you mind,thanks for your understanding. Specifications: Touch mode:Resistive touch Resolution: 480 * 320 Display area diagonal size: 3.5INCH Communication interface: USART serial interface Interface level 3.3V / 5V TTL level Working voltage: 4.75-7V Working temperature: -20-70 ℃ FLASH space: 16MB RAM space: 3584BYTE Product size:10*5.5cm/3.93*2.17inch Quantity：1Pc Note: Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon. And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package included: 1Pc x LCD Touch Display M

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

1.14 Inch IPS OLED Display Module LCD Screen 135*240 RGB TFT for Arduino ST7789 LCD Board SPI Full Color HD OLED 8pi

1.44/1.8/2.2/2.4/2.8 Inch TFT Color Screen LCD Display Module Drive ST7735 ILI9341 Interface SPI 128*128 240*320 for Ar

<div><p>High resolution: 80*160 Package:1*Module Working Temperature: -20 ° ~ 70 ° Voltage: 3.3 DC Size: 0.96 1.3 1.44 1.8 inch Driver IC: ST7735</p><

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Tấm chắn đã được lắp ráp hoàn chỉnh, đã được kiểm tra và sẵn sàng hoạt động. Không cần nối dây, không cần hàn! Chỉ cần cắm nó vào và tải lên thư viện của chúng tôi - sẽ hoạt động trong vòng 10 phút! Hoạt động tốt nhất với mọi thiết bị cổ điển (UNO / Duemilanove / Diecimila). Lá chắn này KHÔNG hoạt động với Mega nhưng nó sẽ bằng một nửa tốc độ của bảng loại Uno vì cách Mega sắp xếp lại tất cả các chốt (không có cách nào để vượt qua được!) Tấm chắn này không tương thích với Leonardo Miêu tả sản phẩm: Tô điểm cho sản phẩm của bạn với tấm chắn màn hình cảm ứng lớn đẹp mắt tích hợp kết nối thẻ nhớ microSD. Màn hình TFT này lớn (đường chéo 2,4 inch) sáng (4 đèn nền LED trắng) và nhiều màu sắc (18-bit 262.000 sắc thái khác nhau)! 240x320 pixel với điều khiển pixel riêng lẻ. Có độ phân giải cao hơn màn hình 128x64 đen trắng. Ngoài ra, màn hình này đã có màn hình cảm ứng điện trở được gắn vào, vì vậy bạn có thể thao tác nhấn ngón tay ở bất kỳ đâu trên màn hình. Thông tin chi tiết: Màn hình TFT LCD 2,4" theo đường chéo Độ phân giải 240x320, 18-bit (262.000) màu Bộ điều khiển spfd5408 với bộ đệm RAM video tích hợp Giao diện kỹ thuật số 8 bit, cộng với 4 đường điều khiển Sử dụng chân kỹ thuật số 5-13 và tương tự 0-3. Điều đó có nghĩa là bạn có thể sử dụng chân kỹ thuật số 2, 3 và tương tự 4 và 5. Chân 12 khả dụng nếu không sử dụng thẻ nhớ microSD hoạt động với bất kỳ '328 hoặc Mega (Leonardo chưa được hỗ trợ) Có thể tương thích với 5V! Sử dụng 3.3V hoặc 5V Bộ điều chỉnh LDO 3.3V 300mA tích hợp 4 đèn nền LED màu trắng. Bật theo mặc định nhưng bạn có thể kết nối bóng bán dẫn với chân kỹ thuật số để điều khiển đèn nền Màn hình cảm ứng điện trở

Hello everyone, our company is in Shenzhen。we specialize in selling module. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Chúng tôi có nhiều sản phẩm trong kho của chúng tôi, kho của chúng tôi là ở Thâm Quyến. Nếu bạn trò chuyện với chúng tôi, chúng tôi không trả lời bạn, xin đừng lo lắng, chúng tôi đang cố gắng xử lý đơn đặt hàng của bạn. vì vậy xin đừng hủy đơn đặt

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

2.4 inch TFT LCD touch screen color screen module for Arduino Send touch screen pen Product description: Supports development boards such as Arduino for UNO and Mega2560 for plug-in use without wiring 320X240 resolution, clear screen, compatible with touch function Supports 16bit RGB 65K color screen, displays rich colors Parallel 8-bit bus, faster than SPI serial update Level change IC of 5 V / 3.3 V integrated, compatible with operating voltage of 5 V / 3.3 V Easy to expand the experiment with SD card slot Provides an Arduino library with a rich sample program Military grade process standards, long-term stable work Provide underlying controller technology support Parameters of the product: Type: TFT Screen size: 2.4 inches Chip driver: ILI9341 Screen resolution: 320x240 (pixels) Screen size: 48.96mm * 36.72mm Dimensions: 72.20mm * 52.7mm Color screen: RGB 65 K color color Screen interface: 8-bit parallel interface Operating voltage: 5 V / 3.3 V Operating temperature: -20 ~ 70 degrees Storage temperature: -40 ~ 70 degrees Power consumption: 90 mw Applications: Support for UNO, compatible with Mega2560 online, plug and play without wiring. With the touch function STM32 routines C51 routine

Item Description 1.Features SIZE 1.44 inch Display Mode a-TFT Display Format 128RGB*128 dots matrix Input Data SPI interface Drive IC ST7735S Dimensional outline 300(W)*46.50(H)*3.45+/-0.1(T)mm Resolution 128RGB*128 Dots LCD Active area 25.50 (W)*26.50 (H) Pixel size 0.20(W)*0.20(H)mm Viewing Direction 12 o’clock Operating Temperature -20～70°C 2.Pin Descriptions： PIN No Symbol Description GND Ground VCC Power 3.3V SCL Serial clock pin. SDA Serial data input RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is Executed. Keep this pin pull high during normal operation. DC Data/Command Control CS Chip Select BLK Backlight control pin 3. Connected to the microcontroller Package included: 1x 1.44 inch Full Color 128x128 SPI TFT LCD Display M

<div><p>Driver IC: ST7735 High resolution: 80*160 Working Temperature: -20 ° ~ 70 ° Size: 0.96 1.3 1.44 1.8 inch Package:1*Module Voltage: 3.3 DC</p><

🐫🐫Welcome to {steedsuhhno}, your support is our greatest driving force, we will definitely give you the most comfortable shopping experience!!!🐫🐫 =========================={steedsuhhno}============================= Item Description 1.Features SIZE 1.44 inch Display Mode a-TFT Display Format 128RGB*128 dots matrix Input Data SPI interface Drive IC ST7735S Dimensional outline 300(W)*46.50(H)*3.45+/-0.1(T)mm Resolution 128RGB*128 Dots LCD Active area 25.50 (W)*26.50 (H) Pixel size 0.20(W)*0.20(H)mm Viewing Direction 12 o’clock Operating Temperature -20～70°C 2.Pin Descriptions： PIN No Symbol Description GND Ground VCC Power 3.3V SCL Serial clock pin. SDA Serial data input RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is Executed. Keep this pin pull high during normal operation. DC Data/Command Control CS Chip Select BLK Backlight control pin 3. Connected to the microcontroller Package included: 1x 1.44 inch Full Color 128x128 SPI TFT LCD Display M

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we try to handle your order.so pls donot cancel o

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Item Description 1.Features SIZE 1.44 inch Display Mode a-TFT Display Format 128RGB*128 dots matrix Input Data SPI interface Drive IC ST7735S Dimensional outline 300(W)*46.50(H)*3.45+/-0.1(T)mm Resolution 128RGB*128 Dots LCD Active area 25.50 (W)*26.50 (H) Pixel size 0.20(W)*0.20(H)mm Viewing Direction 12 o’clock Operating Temperature -20～70°C 2.Pin Descriptions： PIN No Symbol Description GND Ground VCC Power 3.3V SCL Serial clock pin. SDA Serial data input RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is Executed. Keep this pin pull high during normal operation. DC Data/Command Control CS Chip Select BLK Backlight control pin 3. Connected to the microcontroller Package included: 1x 1.44 inch Full Color 128x128 SPI TFT LCD Display Modu

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we try to handle your order.so pls donot cancel o

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

100% brand new and high quality This is a 2.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult. With GPRS module, you can design your Arduino phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images. Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo) Specifications: Material: Electrical components Arduino library: UTFT Driver IC: ILI9225，ILI9220，S6D1121，ST7775，ST7735, S6D1121 Touch screen type: resistive touchscreen Touch Pen: length is 9cm Resolution: 176x220, 16-bit (262,000) color Display size: 2.0 inch Operating voltage: 3.3V Logic level: 3.3V Operating current: the maximum is 150mA LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor Download ip:http://www.winddeal.net/image2/tools/1A0850.rar Quantity: 1Pc Note: Pictures are for reference only, driver IC are random delivery, please refer to the product you received Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Module 1 x Touc

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

<div><p>Working Temperature: -20 ° ~ 70 ° Package:1*Module High resolution: 80*160 Driver IC: ST7735 Voltage: 3.3 DC Size: 0.96 1.3 1.44 1.8 inch</p><