St6000vn0033

Description: Model: ST183 This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Specification: DIY Supplies:Electrical Measuring Capacitance Range:60nF-600nF-6uF-60uF-600uF-6mF-30mF +-(3.5%+20) Model Number:ANENG ST209 Multimeter Dimensions:180x60mm / 7.08x2.36inch Measuring Voltage Range:6V-60V-600V-750V +-(0.8%+3) Operating Temperature:(0-40) temperature Measuring Resistance Range:600-6k-60k-600k-6M-40M +-(0.8%+3) Measuring Inductance Range:10Hz-100Hz-1kHz-10kHz-100kHz-1MHz-10MHz +-(0.1%+3) Weight:about 330g Measuring Current Range:60A/600A +-(2.5%+30) Display Type:Analog and Digital Package Includes: 1 Piece ANENG ST183 Clamp Meter 1 Piece Black Packing Bag 2 Pieces Test Probes 1 Piece User Manual Note: Please allow 1-3mm measuring deviation due to manual measurement. Due to the different monitor and light effect,the actual color of the item might be slightly different from the color showed on the pictures.Thank

Tính năng 1-1. Màn hình: Màn hình tinh thể lỏng (LCD); 1-2. Hiển thị tối đa: Màn hình phân cực tự động bit 5999 (3 5/6); 1-3. Phương pháp đo: chuyển đổi A/D tích hợp kép; 1-4. Tỷ lệ lấy mẫu: khoảng 3 lần mỗi giây; 1-5. Hiển thị quá mức: vị trí cao nhất Hiển thị "OL"; 1-6. Hiển thị điện áp thấp: biểu tượng điện áp thấp biểu tượng xuất hiện; 1-7. Môi trường làm việc:(0~40)°, độ ẩm tương đối<80%; 1-8.power: Pin AAA 1.5V (không bao gồm); Chức năng thông số Chức năng Điện áp một chiều DCV ▲ Điện áp xoay chiều AC110V ▲ Dòng điện một chiều DCA ▲ Dòng điện xoay chiều ACA ▲ Điện trở/Diode/Kiểm tra on-off/tụ điện ▲ Tần số F ▲ Đầu ra sóng vuông ▲ NCV ▲ Kiểm tra đường dây/đường dây không Biểu tượng đơn vị đầy đủ ▲ Hướng dẫn sử dụng đèn nền/Tự động tắt ▲ Đo RMS thật ▲ Nhiệt độ (°/°) ▲ Đèn pin chiếu sáng ▲ Package Includes: 1 x ST209 Clamp Meter 1 x Storage Bag 1 x English User Manual 1 x Pair of Test Leads 1 x Type K Thermocouple Features: 1-1. Display: liquid crystal display (LCD); 1-2. Maximum display: 5999 (3 5/6) bit automatic polarity display; 1-3. Measurement method: double integral A/D conversion; 1-4. Sampling rate: about 3 times per second; 1-5. Overrange display: The highest position shows“OL”; 1-6. Low voltage display:“Low voltage symbol ”symbol appears; 1-7. Working environment:(0~40)°,relative humidity<80%; 1-8.Power: AAA 1.5V battery(not include); Note: This series of instruments is designed in accordance with IEC1010 (Safety Standards promulgated by the International Electrotechnical Commission), please read the safety precautions before use. 1. When measuring voltage, please do not input the limit voltage exceeding the effective value of DC 1000V or AC 750V; 2.The voltage below 2.36V is a safe voltage. When measuring higher than 36V DC and 25V AC voltage, check whether the test leads are in reliable contact, are connected correctly, and are well insulated to avoid electric shock; 3. When changing functions and ranges, the test leads should leave the test p

Description: Model: ST183 This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Specification: DIY Supplies:Electrical Measuring Capacitance Range:60nF-600nF-6uF-60uF-600uF-6mF-30mF +-(3.5%+20) Model Number:ANENG ST209 Multimeter Dimensions:180x60mm / 7.08x2.36inch Measuring Voltage Range:6V-60V-600V-750V +-(0.8%+3) Operating Temperature:(0-40) temperature Measuring Resistance Range:600-6k-60k-600k-6M-40M +-(0.8%+3) Measuring Inductance Range:10Hz-100Hz-1kHz-10kHz-100kHz-1MHz-10MHz +-(0.1%+3) Weight:about 330g Measuring Current Range:60A/600A +-(2.5%+30) Display Type:Analog and Digital Package Includes: 1 Piece ANENG ST183 Clamp Meter 1 Piece Black Packing Bag 2 Pieces Test Probes 1 Piece User Manual Note: Please allow 1-3mm measuring deviation due to manual measurement. Due to the different monitor and light effect,the actual color of the item might be slightly different from the color showed on the pictures.Thank

#ST210 #True #RMS #Multimeter #Clamp #Meter #DC/AC #600A #Amp #Current #Tester #6000 #Counts ST210 Professional Digital Multimeter Clamp Meter DC/AC 600A Current Tester 6000 Counts True RMS Ampere Meter for Eletric Characteristics: 1-1.Display:liquid srystal display(LCD) 1-2.Max display:6000 counts 1-3 Measure method:double integral A/D conversion 1-4.sampling rate:about 3 times per second 1-5.over range display:the highest position shows"OL" 1-6.Power:AAA 2*1.5V battery(Not included) Technical specification DCV/ACV: DC/AC6V/60V DC700V, AC500V Resistance: 600Ω/6kΩ/60kΩ/600kΩ/60MΩ Capacitance: 10nF/100nF/1uF/10uF/100uF/1mF/10mF/60mF AC/DC Current: 60A/600A +-(2.5%+30) Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10Hz +-(0.1%+3) Temperature: YES Fast continuity Test: YES Package Include: 1*clamp meter 2*Test lead wire 1*Thermocouple 1*Manual 1*Storage bag 1*Packin

Description: Item type:tool Function: DC voltage  DCV :yes AC voltage  ACV : yes DC current  DCA : yes AC current  ACA : yes Resistor / Diode / On-Off Test / Capacitor : yes Frequency F : yes Square wave output : yes NCV : yes Full unit symbol : yes Backlight manual/Auto off : yes True RMS measurement : yes Temperature(°/°) : yes Flashlight lighting : yes Packing list: 1* instruction manual 1* certificate, one leather case 1* outer packaging box 1* pair of test leads 1* type K thermocouple 1* temperature probe Notes: 1-2mm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor sett

Description: Model: ST183 This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Specification: DIY Supplies:Electrical Measuring Capacitance Range:60nF-600nF-6uF-60uF-600uF-6mF-30mF +-(3.5%+20) Model Number:ANENG ST209 Multimeter Dimensions:180x60mm / 7.08x2.36inch Measuring Voltage Range:6V-60V-600V-750V +-(0.8%+3) Operating Temperature:(0-40) temperature Measuring Resistance Range:600-6k-60k-600k-6M-40M +-(0.8%+3) Measuring Inductance Range:10Hz-100Hz-1kHz-10kHz-100kHz-1MHz-10MHz +-(0.1%+3) Weight:about 330g Measuring Current Range:60A/600A +-(2.5%+30) Display Type:Analog and Digital Package Includes: 1 Piece ANENG ST183 Clamp Meter 1 Piece Black Packing Bag 2 Pieces Test Probes 1 Piece User Manual Note: Please allow 1-3mm measuring deviation due to manual measurement. Due to the different monitor and light effect,the actual color of the item might be slightly different from the color showed on the pictures.Thank

#ST207 #Bluetooth #Digital #Clamp #Meter #6000 #Counts #DC/AC #True #RMS #Multimeter #Hz #Ohm ST207 Digital Newly Upgraded professional Bluetooth Clamp Meter 6000 Counts True RMS AC Current Multimeter Hz Capacitance Ohm DC/AC Voltage Tester Introduction: This products is a battery-powered,bluetooth transmission, ture-rms,auto ranging digital clamp multimeter with 6000 counts LCD display and a backlight. Specifications Display（LCD）: 6000 counts Ranging: Auto Material:ABS Update Rate :3 times/second Ture RMS :YES Data Hold :YES Low Battery Alert :YES Auto Power Off :YES Funciton: DC Voltage(V): 0-6V/60V/600V AC Voltage(V): 0-6V/60V/600V AC Current(A): 0-6A/60A/600A Resistance: 0-6kΩ/60kΩ/600kΩ/6MΩ/60MΩ Frequency: 0-9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz Capacitance: 0- 9.999nF/99.99nF/999.9nF /9.999μF /99.99μF/999.9μF/4.000mF Diode:YES Continuity :YES InrushCurrent:YES Peak Hold:YES Flashlight:YES Package included:(with retail packaged) 1 * ST207 Bluetooth Clamp Meter 2 * Test lead wire 1 * Digging rope 1 * M

ST184 6000 Counts Digital Professional Multimeter Clamp Meter True RMS AC/DC Voltage Tester AC Current Hz Capacitance Ohm Description: ST184 is a portable, professional measuring instrument, with a liquid crystal digital display and a backlight, so users can read easily. In addition, it has overload protection and low battery indication. Whether used by professionals, factories, schools, enthusiasts or families, it is an ideal multifunctional instrument. Electrical Specifications: AC Current : 0-600A DC Voltage: 0-500V AC Voltage: 0-450V Frequency: 0-99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Capacitance: 0-9.999nF/ 99.99nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF/99.99mF Temperature : -20°C~1000°C Resistance: 0- 6kΩ/60kΩ/600kΩ/6MΩ/10MΩ Package List: 1 * ST184 Clamp Meter 2 * Test Probes 1 * User M

🌲 Apex car drl st006 8x5smd led light 12v 2w 6000k adafrclw ( 🔘🔘🔘 🔘🔘🔘 🙍‍♂️🛢 Read compulsory notes before transactions 🙍‍♂️🛢 Check stock before order 🙍‍♂️🛢 The products that have been purchased cannot be returned 🙍‍♂️🛢 Do not accept any return & complaint in any form 🙍‍♂️🛢 Apex car drl st006 8x5smd led light 12v 2w 6000k adafr

ANENG ST209 Digital Multimeter Clamp Meter 6000 Counts True RMS Amp DC/AC Current Clamp Tester Meters Voltmeter Auto Ranging LCD Display Pocket-sized automatic digital meter has stable performance, high precision, high reliability, clear reading and overload protection. Driven by AAA 1.5V battery, with large screen LCD display, the multimeter ensure the high brightness of backlight and flashlight even at the edge of 2.3V low battery. It can be used to measure DC voltage and AC voltage, AC and DC current 600A, resistance, capacitance, diode, temperature, continuity test, square wave output, frequency measurement and true RMS. It is a superior tool for laboratories, factories, radio enthusiasts and families. Features: Multi-functional multimeter, can be used to measure DC/AC voltage, AC/DC current 600A, resistance, capacitance, diode, temperature, continuity test, etc. Built-in sensor, supports non-contact detection, the multimeter will sound an alarm beep when it detects nearby AC voltage. Temperature measurement function, turn the dial to the corresponding gear position and place the temperature line in the measuring object. Supports flashlight lighting, you can easy to find the location of the measurement in a dark environment. A superior tool for laboratories, factories, radio enthusiasts and families, suitable for appliance repair, electronic products repair and automotive DC detection. Specifications: Brand: ANENG Model: ST209 Color: Black/ Red(optional) Material: ABS Display: LCD Maximum display: 5999 (3 5/6) bit automatic polarity display Measurement method: double integral A/D conversion Sampling rate: about 3 times per second Over range display: The highest position shows "OL" Working environment: (0～40)℃，relative humidity ＜80% Power Supply: 2 * AAA 1.5V battery(not included) Item Size: 18 * 6.36 * 3.1cm/ 7 * 2.5 * 1.22in Item Weight: 172g/ 6oz Package Size: 19.5 * 11 * 4cm/ 7.7 * 4.3 * 1.6in Package Weight: 298g/ 10.5oz Package List: 1 * Multimeter 1 * Test Pen 1 * Temperature Line 1 * Storage Bag 1 * Manual(English) #digitalclampmeter #acdcmeter #digitalacclampmeter #clampmeter #autorangingclampmeter #clampmeteralligatorclip #clampmeteracdc #highprecisionclampmeter #clampmultimeter #clampmetert

Description: Item type:tool Function: DC voltage  DCV :yes AC voltage  ACV : yes DC current  DCA : yes AC current  ACA : yes Resistor / Diode / On-Off Test / Capacitor : yes Frequency F : yes Square wave output : yes NCV : yes Full unit symbol : yes Backlight manual/Auto off : yes True RMS measurement : yes Temperature(°/°) : yes Flashlight lighting : yes Packing list: 1* instruction manual 1* certificate, one leather case 1* outer packaging box 1* pair of test leads 1* type K thermocouple 1* temperature probe Notes: 1-2mm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor sett

#ST184 #6000 #Counts #Digital #Multimeter #Clamp #Meter #True #RMS #AC/DC #Voltage #Ohm #Hz ST184 6000 Counts Digital Professional Multimeter Clamp Meter True RMS AC/DC Voltage Tester AC Current Hz Capacitance Ohm Description: ST184 is a portable, professional measuring instrument, with a liquid crystal digital display and a backlight, so users can read easily. In addition, it has overload protection and low battery indication. Whether used by professionals, factories, schools, enthusiasts or families, it is an ideal multifunctional instrument. Electrical Specifications: AC Current : 0-600A DC Voltage: 0-500V AC Voltage: 0-450V Frequency: 0-99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Capacitance: 0-9.999nF/ 99.99nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF/99.99mF Temperature : -20℃~1000℃ Resistance: 0- 6kΩ/60kΩ/600kΩ/6MΩ/10MΩ Package List: 1 * ST184 Clamp Meter 2 * Test Probes 1 * User M

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày 🎉Xin chào ~ Hãy nhấp vào hashtag #KAWAYI💝STORE để khám phá thêm nhiều sản phẩm đẹp khác Đa năng kế kỹ thuật số ANENG ST209 6000 lần đếm kẹp dòng điện DC/AC RMS thực có màn hình LCD tự động đo khoảng cách Máy đo kỹ thuật số tự động bỏ túi có hiệu suất ổn định, độ chính xác cao, độ tin cậy cao, đọc rõ ràng và bảo vệ quá tải. Chạy bằng pin AAA 1.5V, với màn hình LCD lớn, đa năng kế đảm bảo độ sáng cao của đèn nền và đèn pin ngay cả khi pin yếu 2.3V. Có thể sử dụng để đo điện áp DC và điện áp AC, dòng điện AC và DC 600A, điện trở, điện dung, diode, nhiệt độ, kiểm tra tính liên tục, đầu ra sóng vuông, đo tần số và RMS thực. Sản phẩm là dụng cụ ưu việt cho các phòng thí nghiệm, nhà máy, những người đam mê radio và các hộ gia đình. Đặc trưng: Đa năng kế đa năng có thể sử dụng để đo điện áp DC/AC, dòng điện AC/DC 600A, điện trở, điện dung, diode, nhiệt độ, kiểm tra tính liên tục, v.v. Cảm biến tích hợp, hỗ trợ dò không tiếp xúc, đa năng kế sẽ phát ra tiếng bíp báo động khi phát hiện điện áp AC gần đó. Chức năng đo nhiệt độ, xoay mặt đồng hồ về vị trí bánh răng tương ứng và đặt vạch nhiệt độ vào đối tượng đo. Hỗ trợ đèn pin chiếu sáng, bạn có thể dễ dàng tìm thấy vị trí đo trong môi trường tối đen. Một dụng cụ ưu việt cho các phòng thí nghiệm, nhà máy, những người đam mê radio và hộ gia đình, thích hợp để sửa chữa thiết bị, sửa chữa sản phẩm điện tử và dò DC ô tô. Thông tin sản phẩm: Thương hiệu: ANENG Mã sản phẩm: ST209 Màu sắc: Đen / Đỏ (tùy chọn) Chất liệu: ABS Màn hình: LCD Hiển thị tối đa: Màn hình phân cực tự động 5999 (3 5/6) bit Phương pháp đo: chuyển đổi A/D tích phân kép Tốc độ lấy mẫu: khoảng 3 lần mỗi giây Hiển thị vượt phạm vi: Vị trí cao nhất hiển thị "OL" Môi trường hoạt động: ( 0～40)℃ ， độ ẩm tương đối ＜80% Nguồn điện: 2 * pin AAA 1.5V (không bao gồm) Kích thước sản phẩm: 18 * 6.36 * 3.1cm/ 7 * 2.5 * 1.22in Trọng lượng sản phẩm: 172g / 6oz Kích thước gói hàng: 19.5 * 11 * 4cm/ 7.7 * 4.3 * 1.6in Trọng lượng gói hàng: 298g / 10.5oz Gói hàng bao gồm: 1 * Đa năng kế 1 * Bút dò 1 * Dây nhiệt độ 1 * Túi đựng 1 * Hướng dẫn sử dụng (tiếng Anh) #digitalclampmeter #acdcmeter #digitalacclampmeter #clampmeter #autorangingclampmeter #clampmeteralligatorclip #clampmeteracdc #highprecisionclampmeter #clampmultimeter #clampmetert

#ST183 #Auto #Digital #Clamp #Meter #6000 #Counts #Multimeter #Ammeter #AC #DC #Amp #NCV #Ohm Digital Clamp Meter ST183 DC/AC Current 6000 Counts Multimeter Ammeter Voltage Tester Car Amp Hz Capacitance NCV Ohm Test Features: This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Specification: DIY Supplies : Electrical Measuring Capacitance Range : 6nF/60nF/600nF/6uF/600uF/6mF/60mF Model Number : ST183 Digital clamp meter Dimensions : Multimeter clamp meter Measuring Voltage Range : 6V/60V/600V Operating Temperature : 0-40 temperature Measuring Resistance Range : 600Ω/6kΩ/60 kΩ/600kΩ/6MΩ/60MΩ Frequency: 999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Measuring Current Range : 60A/600A Continuity: YES NCV: YES Ranging:AUTO Update Rate: 3 times/second True RMS: YES Data Hold:YES Low Battery Alert: YES Auto Power Off: YES Display Type : Analog and Digital Power :AAA not included Package included:(with retail box) 1 X Clamp meter 1 X Test pen 1 X Manual (English) 1 X Storag

#ST183 #Auto #Digital #Clamp #Meter #6000 #Counts #Multimeter #Ammeter #AC #DC #Amp #NCV #Ohm Digital Clamp Meter ST183 DC/AC Current 6000 Counts Multimeter Ammeter Voltage Tester Car Amp Hz Capacitance NCV Ohm Test Features: This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Specification: DIY Supplies : Electrical Measuring Capacitance Range : 6nF/60nF/600nF/6uF/600uF/6mF/60mF Model Number : ST183 Digital clamp meter Dimensions : Multimeter clamp meter Measuring Voltage Range : 6V/60V/600V Operating Temperature : 0-40 temperature Measuring Resistance Range : 600Ω/6kΩ/60 kΩ/600kΩ/6MΩ/60MΩ Frequency: 999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Measuring Current Range : 60A/600A Continuity: YES NCV: YES Ranging:AUTO Update Rate: 3 times/second True RMS: YES Data Hold:YES Low Battery Alert: YES Auto Power Off: YES Display Type : Analog and Digital Power :AAA not included Package included:(with retail box) 1 X Clamp meter 1 X Test pen 1 X Manual (English) 1 X Storag

This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Brand Name: ANENG Supplies: Electrical Display Type: Digital Display DIY Supplies : Electrical Measuring Capacitance Range : 6nF/60nF/600nF/6uF/600uF/6mF/60mF el Number : ST183 Digital clamp meter Measuring Voltage Range : 6V/60V/600V Operating Temperature : 0-40 temperature Measuring Resistance Range : 600ohm/6kohm/60 kohm/600kohm/6Mohm/60Mohm Frequency: 999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Measuring Current Range : 60A/600A Continuity: YES NCV: YES Ranging:AUTO Update Rate: 3 times/second True RMS: YES Data Hold:YES Low Battery Alert: YES Auto Power Off: YES Display Type : Analog and Digital Power :AAA not included colour:Black+red Material:ABS+electronic components size:180 x 60 x 28mm Package Contents: 1 x Clamp meter 1 x Test pen 1 x Manual (English) 1 x Storage bagOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

ANENG ST183 6000 Counts Digital AC Current Clamp Meter 600A Automatic Range Multimeter with Backlight Voltage Meter Clamp Gauge NCV Test Clamp Ammeter Universal Meter Tester Measuring Capacitance / AC Current / AC/DC Voltage / Resistance / Frequency Features: - Compact Size: Portable to carry and easy to use in one hand. - 36mm Jaw Opening: 36mm large jaw opening to measure without touching or interrupting the circuit. - Automatic Range: Intelligent efficient operation to get scientific accurate results. - 600A AC Current Measurement: 60A~600A wide range measurement, suitable for various wires, convenient & accurate. - NCV Non-contact Voltage Detection: If you want to detect whether there is AC voltage or electromagnetic field in the space, you can get the front end of the clamp head of the meter close to the measured object. If there is, a beep will sound and the NCV light will flash. - Data Hold Function: Hold the measured data for conveniently checking or observing data. - Backlight Function: LCD screen with backlight for clear data display. - Low Voltage Prompt: When the low power symbol appears, it is necessary to replace the battery in time. Insufficient power may affect the accuracy of the measurement results. - Automatic Shutdown: If there is no operation within 15 minutes, the meter will shut down automatically. - Equipped Accessories: Comes with one pair of test probes for convenient measurements. The black pouch with zipper is for convenient storing and carrying. - Multifunctional Measurement: AC / DC voltage, AC current, resistance, capacitance, frequency, NCV test, on-off test. Specifications: Product Material: ABS Line Material: Brass+PVC Color: Black Power Supply: 2 * AAA Battery (NOT included) Automatic Shutdown: After 15 minutes Display: LCD display Maximum Count: 6000 counts Jaw Opening: 36mm DC Voltage Range: 6V/60V±(0.5%+5), 600V/>600V±(0.8%+5) AC Voltage Range: 6V/60V±(1.0%+5), 600V/>600V±(1.2%+8) AC Current Range: 60A±(1.2%+8), 600A±(2.2%+8) Frequency Range: 999.9Hz/9.999kHz/99.99kHz±(1.0%+5), 999.9kHz±(2.0%+5), 9.999mHz±(3.0%+5), 20.00mHz±(4.0%+10) Resistance Range: 600Ω±(1.3%+5), 6kΩ/60kΩ/600kΩ/6MΩ±(1.0%+5), 60MΩ±(1.5%+5) Capacitance Range: 6nF/60nF/600nF/6uF/60uF±(3.0%+5), 600μF±(3.5%+5), 6mF±(5.0%+6), 60mF±(8.0%+10) Zero/Fire Line Identification: √ NCV Test: √ On-off Beep: √ Backlight: √ Data Hold: √ Item Size: Approx. 180*60*28mm / 7.09*2.36*1.1in Item Weight: Approx. 128g / 4.52oz Package Size: Approx. 23.5*10*4cm / 9.25*3.94*1.57in Package Weight: Approx. 281g / 7.69oz Note: Please read the Users Manual before use. Packing List: 1 * Clamp Meter 1 * Pair of Test Leads 1 * Storage Bag 1 * Users Manual(Eng

Description: Model: ST183 This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Specification: DIY Supplies:Electrical Measuring Capacitance Range:60nF-600nF-6uF-60uF-600uF-6mF-30mF +-(3.5%+20) Model Number:ANENG ST209 Multimeter Dimensions:180x60mm / 7.08x2.36inch Measuring Voltage Range:6V-60V-600V-750V +-(0.8%+3) Operating Temperature:(0-40) temperature Measuring Resistance Range:600-6k-60k-600k-6M-40M +-(0.8%+3) Measuring Inductance Range:10Hz-100Hz-1kHz-10kHz-100kHz-1MHz-10MHz +-(0.1%+3) Weight:about 330g Measuring Current Range:60A/600A +-(2.5%+30) Display Type:Analog and Digital Package Includes: 1 Piece ANENG ST183 Clamp Meter 1 Piece Black Packing Bag 2 Pieces Test Probes 1 Piece User Manual Note: Please allow 1-3mm measuring deviation due to manual measurement. Due to the different monitor and light effect,the actual color of the item might be slightly different from the color showed on the pictures.Thank

#ST184 #6000 #Counts #Digital #Multimeter #Clamp #Meter #True #RMS #AC/DC #Voltage #Ohm #Hz ST184 6000 Counts Digital Multimeter Clamp Meter True RMS AC/DC Voltage Ohm Hz ST184 6000 Counts Digital Professional Multimeter Clamp Meter True RMS AC/DC Voltage Tester AC Current Hz Capacitance Ohm Description: ST184 is a portable, professional measuring instrument, with a liquid crystal digital display and a backlight, so users can read easily. In addition, it has overload protection and low battery indication. Whether used by professionals, factories, schools, enthusiasts or families, it is an ideal multifunctional instrument. Electrical Specifications: AC Current : 0-600A DC Voltage: 0-500V AC Voltage: 0-450V Frequency: 0-99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Capacitance: 0-9.999nF/ 99.99nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF/99.99mF Temperature : -20℃~1000℃ Resistance: 0- 6kΩ/60kΩ/600kΩ/6MΩ/10MΩ Package List: 1 * ST184 Clamp Meter 2 * Test Probes 1 * User M

ANENG ST183 6000 Counts Digital AC Current Clamp Meter 600A Automatic Range Multimeter with Backlight Voltage Meter Clamp Gauge NCV Test Clamp Ammeter Universal Meter Tester Measuring Capacitance / AC Current / AC/DC Voltage / Resistance / Frequency Features: - Compact Size: Portable to carry and easy to use in one hand. - 36mm Jaw Opening: 36mm large jaw opening to measure without touching or interrupting the circuit. - Automatic Range: Intelligent efficient operation to get scientific accurate results. - 600A AC Current Measurement: 60A~600A wide range measurement, suitable for various wires, convenient & accurate. - NCV Non-contact Voltage Detection: If you want to detect whether there is AC voltage or electromagnetic field in the space, you can get the front end of the clamp head of the meter close to the measured object. If there is, a beep will sound and the NCV light will flash. - Data Hold Function: Hold the measured data for conveniently checking or observing data. - Backlight Function: LCD screen with backlight for clear data display. - Low Voltage Prompt: When the low power symbol appears, it is necessary to replace the battery in time. Insufficient power may affect the accuracy of the measurement results. - Automatic Shutdown: If there is no operation within 15 minutes, the meter will shut down automatically. - Equipped Accessories: Comes with one pair of test probes for convenient measurements. The black pouch with zipper is for convenient storing and carrying. - Multifunctional Measurement: AC / DC voltage, AC current, resistance, capacitance, frequency, NCV test, on-off test. Specifications: Product Material: ABS Line Material: Brass+PVC Color: Black Power Supply: 2 * AAA Battery (NOT included) Automatic Shutdown: After 15 minutes Display: LCD display Maximum Count: 6000 counts Jaw Opening: 36mm DC Voltage Range: 6V/60V±(0.5%+5), 600V/>600V±(0.8%+5) AC Voltage Range: 6V/60V±(1.0%+5), 600V/>600V±(1.2%+8) AC Current Range: 60A±(1.2%+8), 600A±(2.2%+8)  Frequency Range: 999.9Hz/9.999kHz/99.99kHz±(1.0%+5), 999.9kHz±(2.0%+5),     9.999mHz±(3.0%+5), 20.00mHz±(4.0%+10) Resistance Range: 600Ω±(1.3%+5), 6kΩ/60kΩ/600kΩ/6MΩ±(1.0%+5), 60MΩ±(1.5%+5) Capacitance Range: 6nF/60nF/600nF/6uF/60uF±(3.0%+5), 600μF±(3.5%+5), 6mF±(5.0%+6), 60mF±(8.0%+10) Zero/Fire Line Identification: √ NCV Test: √ On-off Beep: √ Backlight: √ Data Hold: √ Item Size: Approx. 180*60*28mm / 7.09*2.36*1.1in Item Weight: Approx. 128g / 4.52oz Package Size: Approx. 23.5*10*4cm / 9.25*3.94*1.57in Package Weight: Approx. 281g / 7.69oz Note: Please read the Users Manual before use. Packing List: 1 * Clamp Meter 1 * Pair of Test Leads 1 * Storage Bag 1 * Users Manual(Eng

Autovision st006 apex car drl led light bulb (8x5smd / 12 v / 2 w / 6000 k) is a high-quality led addition lamp with a light temperature of 6000k resulting in energy-saving white light. Beautify your vehicle 's appearance with an automatic 5 smd led reflection when the engine is on. It is designed with a unique clamp system to facilitate installlation, as well as suitable for daylight use. Using the nsat driving drl can avoid 12.4% of traffic accidents and can reduce the mortality rate of 26.4% of traffic accidents Extra led light 6000k light temperature produces energy-saving white light Beautify your vehicle 's appearance with an automatic 5 smd led reflector when the engine starts Designed slim with unique clamp system for easy installlation Suitable for daylight use 3800 l

#ST210 #True #RMS #Multimeter #Clamp #Meter #DC/AC #600A #Amp #Current #Tester #6000 #Counts ST210 Professional Digital Multimeter Clamp Meter DC/AC 600A Current Tester 6000 Counts True RMS Ampere Meter for Eletric Characteristics: 1-1.Display:liquid srystal display(LCD) 1-2.Max display:6000 counts 1-3 Measure method:double integral A/D conversion 1-4.sampling rate:about 3 times per second 1-5.over range display:the highest position shows"OL" 1-6.Power:AAA 2*1.5V battery(Not included) Technical specification DCV/ACV: DC/AC6V/60V DC700V, AC500V Resistance: 600Ω/6kΩ/60kΩ/600kΩ/60MΩ Capacitance: 10nF/100nF/1uF/10uF/100uF/1mF/10mF/60mF AC/DC Current: 60A/600A +-(2.5%+30) Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10Hz +-(0.1%+3) Temperature: YES Fast continuity Test: YES Package Include: 1*clamp meter 2*Test lead wire 1*Thermocouple 1*Manual 1*Storage bag 1*Packin

Description: Item type:tool Function: DC voltage  DCV :yes AC voltage  ACV : yes DC current  DCA : yes AC current  ACA : yes Resistor / Diode / On-Off Test / Capacitor : yes Frequency F : yes Square wave output : yes NCV : yes Full unit symbol : yes Backlight manual/Auto off : yes True RMS measurement : yes Temperature(°/°) : yes Flashlight lighting : yes Packing list: 1* instruction manual 1* certificate, one leather case 1* outer packaging box 1* pair of test leads 1* type K thermocouple 1* temperature probe Notes: 1-2mm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor sett

This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. Can measure AC/DC voltage, AC current, resistance,capacitance and frequency. Data hold function, low battery indication, auto power off. Suitable for electrical equipment testing and maintenance. Brand Name: ANENG Supplies: Electrical Display Type: Digital Display DIY Supplies : Electrical Measuring Capacitance Range : 6nF/60nF/600nF/6uF/600uF/6mF/60mF el Number : ST183 Digital clamp meter Measuring Voltage Range : 6V/60V/600V Operating Temperature : 0-40 temperature Measuring Resistance Range : 600ohm/6kohm/60 kohm/600kohm/6Mohm/60Mohm Frequency: 999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999mHz Measuring Current Range : 60A/600A Continuity: YES NCV: YES Ranging:AUTO Update Rate: 3 times/second True RMS: YES Data Hold:YES Low Battery Alert: YES Auto Power Off: YES Display Type : Analog and Digital Power :AAA not included colour:Black+red Material:ABS+electronic components size:180 x 60 x 28mm Package Contents: 1 x Clamp meter 1 x Test pen 1 x Manual (English) 1 x Storage bagOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

ANENG ST209 Digital Multimeter Clamp Meter 6000 Counts True RMS Amp DC/AC Current Clamp Tester Meters Voltmeter Auto Ranging LCD DisplayPocket-sized automatic digital meter has stable performance, high precision, high reliability, clear reading and overload protection. Driven by AAA 1.5V battery, with large screen LCD display, the multimeter ensure the high brightness of backlight and flashlight even at the edge of 2.3V low battery. It can be used to measure DC voltage and AC voltage, AC and DC current 600A, resistance, capacitance, diode, temperature, continuity test, square wave output, frequency measurement and true RMS. It is a superior tool for laboratories, factories, radio enthusiasts and families. Features: Multi-functional multimeter, can be used to measure DC/AC voltage, AC/DC current 600A, resistance, capacitance, diode, temperature, continuity test, etc. Built-in sensor, supports non-contact detection, the multimeter will sound an alarm beep when it detects nearby AC voltage. Temperature measurement function, turn the dial to the corresponding gear position and place the temperature line in the measuring object. Supports flashlight lighting, you can easy to find the location of the measurement in a dark environment. A superior tool for laboratories, factories, radio enthusiasts and families, suitable for appliance repair, electronic products repair and automotive DC detection. Specifications: Brand: ANENG Model: ST209 Color: Black/ Red(optional) Material: ABS Display: LCD Maximum display: 5999 (3 5/6) bit automatic polarity display Measurement method: double integral A/D conversion Sampling rate: about 3 times per second Over range display: The highest position shows "OL" Working environment: (0～40)℃，relative humidity ＜80% Power Supply: 2 * AAA 1.5V battery(not included) Item Size: 18 * 6.36 * 3.1cm/ 7 * 2.5 * 1.22in Item Weight: 172g/ 6oz Package Size: 19.5 * 11 * 4cm/ 7.7 * 4.3 * 1.6in Package Weight: 298g/ 10.5oz Package List: 1 * Multimeter 1 * Test Pen 1 * Temperature Line 1 * Storage Bag 1 * Manual(English) #digitalclampmeter #acdcmeter #digitalacclampmeter #clampmeter #autorangingclampmeter #clampmeteralligatorclip #clampmeteracdc #highprecisionclampmeter #clampmultimeter #clampmetert

Vend❥ Model: ST184 Material: ABSBrass+PVC. Color: red, black. Size: 184*65*33.2mm Power supply: 2 * AAA batteries not included. NCV: Yes. AC voltage range: 6V60V, accuracy: ±0.8%+5; 450V, accuracy: ± 1.2% + 5. DC voltage range: 6V60V, accuracy: ± 0.5% + 3; 500V: Accuracy: ±0.8% + 5. AC current range: 6A, accuracy: ±3.0%+20; 60A400A, accuracy: ±2.5%+8; 400A~600A, accuracy: ±3%+10 for reference only. Frequency rangeprecision: 99.99Hz~9.999mHz±0.1%+2. Capacitance rangeaccuracy: 9.999nF±5.0%+20; 99.99nF~999.9uF±2.0%+5; 9.999mF±5.0%+5. Temperature rangeprecision: -20℃~1000℃±2.5%+5d. Resistance rangeprecision: 6kΩ60kΩ600kΩ: ±0.8%+3; 6MΩ10MΩ: ±1.2% + 3. Package Included: 1 *ANENG ST184 Clamp Multimeter; 1 *Test pen; 1 *Temperature line; 1 *User manual, 1 *Outer packing

ST184 is a portable, professional measuring instrument, with a liquid crystal digital display and a backlight, so users can read easily. In addition, it has overload protection and low battery indication. Whether used by professionals, factories, schools, enthusiasts or families, it is an Perfect multifunctional instrument. Electrical Specifications: AC Current : 0-600A DC Voltage: 0-500V AC Voltage: 0-450V Frequency: 0-99.99Hz999.9Hz9.999kHz99.99kHz999.9kHz9.999mHz Capacitance: 0-9.999nF 99.99nF999.9nF9.999uF99.99uF999.9uF9.999mF99.99mF Temperature : -20℃-1000℃ Resistance: 0- 6kΩ 60kΩ 600kΩ 6MΩ 10MΩ size:184.8 x 65 x 33.2mm Material:ABS+electronic components colour:Red+black / Yellow+black / black Package Contents: 1 x ANENG ST184 Clamp Meter 2 x Test Probes 1 x User Manual 1 x Outer Packing Box 1 x Manual<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: Universal Electricity Measuring Tester: can measure including AC current, AC/DC voltage, Hz/frequency, resistance, capacitance, and temperature, which has wide measurement ranges. NCV Induction: the intelligent auto-ranging clamp multimeter can measure current without breaking the wire. Clear Digital Display: 6000 counts maximum display, its bright screen combined with data retention function, makes data viewing easier even in the dim environment. Easy to Use and Portable: small size multimeter is easy for one-handed operation, with a zipper pouch that makes storage and carry around more conveniently. Other Functions: diode test, auto shut-down, on-off detection, live detection, flashlight, etc., the clamp meter has overload protection at all ranges, perfect for professional, electrician, factory, office, or family using. Specifications: AC Current: 6A/60A/600A DC Voltage: 6V/60V/500V AC Voltage: 6V/60V/450V Hz/Frequency: 99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz Resistance: 6kΩ/60kΩ/600kΩ/6MΩ/10MΩ Capacitance: 9.999nF/99.99nF/999.9nF/9.999μF/99.99μF/999.9μF/9.999mF/99.99mF Temperature: -20~1000℃(-4~1832℉) Material: ABS Range: Auto, manual Power Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 184.5 * 67 * 32mm / 7.26 * 2.64 * 1.26in Item Weight: 172g / 6.07oz Package Weight: 400g / 14.11oz Package Size: 23 * 13 * 4.5cm / 9.06 * 5.12 * 1.77in Packing List: 1 * Clamp Meter 1 * Pair of Test Lead 1 * Thermal Couple 1 * Storage

Vend❥ Features: 1.This product is a battery-powered, true-rms, auto ranging digital clamp multimeter with a 6000 counts LCD display and a backlight. 2.Can measure ACDC voltage, AC current, resistance,capacitance and frequency. 3.Data hold function, low battery indication, auto power off. 4.Suitable for electrical equipment testing and maintenance. Material:ABS. Color:Red. Display LCD:4000 counts. Ranging:Auto. Update Rate:3 timessecond. Power supply:2*AAA batteryNot included. True RMS:Yes. Data Hold:Yes. Low Battery Alert:Yes. Auto Power Off:Yes. DC Voltage Range: 6V60V,Accuracy:±0.5%+5;600V600V:Accuracy:±0.8% + 5. AC Voltage Range: 6V60V,Accuracy:±1.0% + 5;600V600V:Accuracy:±1.2% + 8. AC Current Range: 60A;Accuracy:±1.2% + 8;600A:Accuracy:±2.2%+8. Resistance Range: 600Ω,Accuracy:±1.3%+5;6kΩ60kΩ600kΩ6MΩ:Accuracy:±1.0% + 5;60MΩ:Accuracy:±1.5%+5. Capacitance Range: 6nF60nF600nF6uF60uF,Accuracy:±30% + 5;600uF:Accuracy:±3.5% + 5;6mF:Accuracy:± 5.0% + 6;60mF:Accuracy:± 8%+10. Frequency Range: 999.9Hz9.999kHz99.99kHz,Accuracy:±1.0% + 5;999.9kHz:Accuracy:± 2.0% + 5;9.999mHz:Accuracy:±3. 0%+5; 20.00mHz:Accuracy:±4.0%+10. Continuity:Yes. NCV:Yes. Package included: 1 * ANENG ST183 Clamp Meter. 1 * Black Packing Bag. 2 * Test Probes. 1 * User Ma

Description: This products is a battery-powered, true-rms, auto ranging digital clamp multimeter with 6000 counts LCD display and a backlight. Safety Information: To avoid possible electrical shock,fire,or personal injury,please read all safety information before you use the products. (1)Do NOT exceed the "maximum value"indicated in the Specification. (2)Examine the connection of the test leads and the insulation of the product before measuring voltage higher than 36V DC or 25V AC (3)Disconnect the test leads from the circuit before changing the mode. (4)Misuse of the mode or range can lead to hazards,be cautious."OL"will be shown on the display when the input is out of the range. Package included: 1 * ANENG ST207 Bluetooth Clamp Meter (Battery not included) 2 * Test lead wire 1 * Digging rope 1 * Manual 1 * Packing box 1 * Storag