Sim900 arduino

Bộ Arduino Advanced Kit [Bộ Kit Arduino nâng cao] gồm: Một KIT Arduino Uno R3 và một số lượng lớn các Module cần thiết sẽ giúp bạn xây dựng các Dự án sáng tạo . Đặc biệt là các bạn mới tiếp xúc và làm quen với Arduino, muốn đi từ Cơ bản đến Nâng cao. TẠI SAO CHỌN BỘ ARDUINO NÂNG CAO? - Số lượng Module (Cảm biến) nhiều => Tiếp xúc nhiều loại Module - CODE MẪU TẶNG KÈM => Học nhanh + Hiệu Quả - Sử dụng Arduino Uno R3 chip cắm (Chip nạp ATMEGA16U2) - Với Bộ Advanced thực hành: UART, I2C, SPI, IN-OUT, ANALOG,... =>LƯU Ý: MODULE LCD+I2C (Một số bộ KIT thị trường chỉ LCD thường, không có I2C tích hợp, nên khó học về LCD); MODULE THỜI GIAN THỰC, TẶNG KÈM PIN Ad sẽ gửi tặng bạn bộ tài liệu ebook Adruino nâng cao (HƯỚNG DẪN + CODE MẪU) đi kèm sản phẩm. Bộ Arduino Advanced Kit bao gồm: - KIT ARDUINO UNO R3 – Chíp Cắm (chip nạp ATMEGA16U2)        1 - Cáp Nối UNO R3 (USB Cable)                 1 - LCD1602 Xanh Dương   (Kèm I2C)          1 - Động Cơ Servor SG90                              1 - Module ULN2003                                      1 - Động Cơ Bước 28BYJ-48                         1 - Kẹp pin 9v (Battery clip)                            1 - Triết áp đơn 10K (Potentiometer)             1 - Dây bẹ 2 đầu đực –cái                     10(sợi)  - Bó dây nối đực-đực                         30 (sợi) - Bo Test (Breadboard 16.5×5.5cm)           1 - Led Matrix 8×8                                         1 - Led 7 Thanh 4 Số (4×7 segment)            1 - Led 7 Thanh 1 Số (1×7 segment)            1 - Còi chip  (Buzzer )                                   2 - Vỏ Nút Nhấn B3F (tròn)                           4 - Nút Nhấn 4 Chân B3F (Switch)               4 - Cảm biến rung (SW-520D)                      2 - IC ghi dịch cho LED (IC 74HC595)          1 - Cảm biến lửa (Flame sensor)                  1 - Mắt Thu Hồng Ngoại (Infrared receiver)  1 - Remote Hồng Ngoại (21 phím)                1 - Cảm biến nhiệt độ (sensor LM35)           1 - Điện trở quang (Photoresistor)                3 - Điện trở 220R                                          10 - Điện trở 1K                                              10 - Điện trở 10K                                            10 - Led Đỏ (5mm)                                          10 - Led Xanh Lá (5mm)                                 10 - Led Vàng (5mm)                                      10 -Module điều khiển 2 chiều (Joystick)        1 - Module RGB (led 3 màu)                         1 - Module RFID RC522 13.56MHz              1 - Bàn Phím Ma Trận 4×4 V2                      1 - Module thời gian thực (DS1307) +PIN     1 - Module relay 5V                                       1 - Module cảm biến âm thanh                     1 - Module nhiệt độ, độ ẩm (DHT11)            1 - Module cảm biến mực nước                   1 - Hộp nhựa đựng bộ ARDUINO KIT          1 #arduino #arduinostarterkit #arduinonangcao #arduinocoban #bohoctaplaptrinhArduino #

Hello everyone, we are Reland Tech, we are mainly engaged in electronic components, electronic tools, bakery products. Customers can contact us for more product information. If there is any dissatisfaction, you can leave us a comment. We will actively correct, of course, thank you for your sincere evalua

TÊN SP: Module Arduino Uno R3 chíp dán ỨNG DỤNG: -Arduino Uno R3 được ứng dụng rất mạnh mẽ trong cả học tập và chế tạo sản phẩm, từ những thiết bị đơn giản đến phức tạp. -Ứng dung trong học tập : Điều khiển đèn LED nhấp nháy, xử lý tín hiệu cho xe điều khiển từ xa, làm một trạm đo nhiệt độ – độ ẩm và hiển thị lên màn hình LCD …. -Ứng dụng trong đời sống : Làm thiết bị nhà thông minh, khóa của tự động, làm sản phẩm nông nghiệp thông minh … -Ứng dụng trong công nghiệp : Hiện nay Arduino được sử dụng khá nhiều trong công nghiệp vì giá thành của nó khá tốt , độ ổn định cao. -Arduino Uno là board mạch rất phổ biến trong các dòng Arduino hiện nay, bạn chỉ cần kết nối -Arduino với máy tính PC hoặc Laptop bằng cáp USB là đã có thể sử dụng và nạp code cho nó một cách rất dễ dàng. Lưu ý : Điện áp khuyên dùng cho arduino khi cấp nguồn ngoài là từ 7-12v , không nên dùng với điện áp vao hơn có thể gây hư hỏng mạch THÔNG SỐ KỸ THUẬT: -Chip điều khiển : ATmega328P-AU -SRAM : 2 KB (ATmega328) -EEPROM : 1 KB (ATmega328) -Tốc độ : 16 MHz -Nguồn nuôi mạch : 5V từ cổng USB hoặc 7-9v từ giắc tròn DCIN -Số chân Digital : 14 chân -Số chân PWM : 6 chân -Số chân Analog : 6 chân -Dòng ra trên mỗi chân tối đa : 40mA -Dòng ra trên chân 3v3 tối đa : 150mA -Dung lượng bộ nhớ Flash : 32 KB – ATmega328 ( 0.5 KB sử dụng cho bootloader ) TÀI LIỆU: -Để nạp code cho board Arduino trước tiên chúng ta cần cài driver cho máy tính : tải driver CH340 tại đây. LINK https://drive.google.com/open?id=1VLFqPhzv--fim-4yDmWKwA59Jqr1BoMK -Sơ đồ ra chân của board arduino :(HÌNH 5) -Arduino.cc Đây là trang web chính thức của nhóm tác giả Arduino, nó chưa vô vàn kiến thức cho cả người mới bắt đầu và cả những dự án lớn nữa. Đây là trang web tiếng anh nên chúng ta có thể vào vừa học vừa tăng khả năng dịch tiếng anh nhé -Arduino.vn Cũng giống như Arduino.cc, trang web này chứa rất nhiều project lớn nhỏ do cộng đồng arduino việt nam phát triển, tất nhiên nó là tiếng việt nhé nên anh em vào lựa mấy dự án hay mà chiến thôi. -Phần mềm Arduino IDE : Phần mềm này có thể down tại Arduino.cc, mình đặt luôn link download tại đây cho ai ngại vào kia tìm nhé : Download tại đây. LINK https://www.arduino.cc/en/Main/Software #arduino #UnoR3 #Uno #arduino #SMD #lậptrình #laptrinh #module #machDien #mạchđiện #Module #Arduino #Uno #R3 #chíp

————-——————-Welcome to xG4s.vn——————————————— Follow Shop: Priority Shipping/get special discount information on time! “Like” Items: Priority Shipping! Enter the promo code, enjoy a extra promotion price! Decription: Feature: The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone networks. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard. Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the networks (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Included: 1 x GPRS/GSM Development Board M

Feature: Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(ap

The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard. Feature: Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Package: 1 x For Arduino SIM900 850/900/1800/1900 MHz GPRS/GSM Development Board M

Description: Item type:tool Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Packing list: 1 * SIM900 GPRS/GSM Shield Development Board Note: due to different personal displays, light and contrast differences, there may be slight color difference between the picture and the real object. Due to different measurement methods, if there is a 2-3mm error, it is within the normal r

---------------------Yyci.vn------------ Decription: Feature: The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone networks. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard. Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the networks (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C 8.5x5.7x2cm(approx) Included: 1 x GPRS/GSM Development Board M

SIM900 850/900/1800/1900 MHz GPRS/GSM Development Board Module Kit for Arduino If you want to see more, please click #kkmoon It is widely used and can be assembled by DIY, it is also easy to use and has a long service life. Features: Made of fine quality material, has a long service life. The GPRS shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 , 07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present onboard. Specifications: Material: PCB Control via AT commands: standard commands GSM 07.07 & 07.05 Short message service: can send small amounts of data over the network (ASCII or raw hexadecimal) Enhanced commands: SIMCOM AT commands Embedded TCP/UDP stack: allows you to upload data to a web server Low power consumption: 1.5mA (sleep mode) Industrial temperature range: -40°C to +85°C Function: works on GSM networks in all countries across the world, GPRS multi-slot class 10/8, GPRS mobile station class B, compliant to GSM phase 2/2+, class 4 (2 W @ 850 / 900 MHz), class 1 (1 W @ 1800 / 1900MHz), RTC supported, selectable serial port, speaker and headphone jacks Item size: 90 * 55 * 10mm / 3.5 * 2.2 * 0.4in Item weight: 39g / 1.4ounce Package size: 110 * 80 * 15mm / 4.3 * 3.1 * 0.6in Package weight: 40g / 1.4ounce Package List: 1 * SIM900 GPRS/GSM Shield Development Board Module Kit for Arduino Compa

Description: Item type:tool Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Packing list: 1 * SIM900 GPRS/GSM Shield Development Board Note: due to different personal displays, light and contrast differences, there may be slight color difference between the picture and the real object. Due to different measurement methods, if there is a 2-3mm error, it is within the normal r

00% brand new and high quality The GPRS Shield is based on SIM900 module from SIMCOM and compatible with and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard. Features: Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Package included: GPRS/GSM SIM900 Shield Development Board

Hello everyone, we are Reland Tech, we are mainly engaged in electronic components, electronic tools, bakery products. Customers can contact us for more product information. If there is any dissatisfaction, you can leave us a comment. We will actively correct, of course, thank you for your sincere evalua

Description: Product categories: Development Board Module Kit Features: four frequency 850/900/1800/1900 MHz - suitable for all countries of the world's GSM network, GPRS multi slot 10/8, GPRS mobile station B class, conforming to GSM phase 2/2 +, 4 level (2 W @ 850/900 MHz), 1 (1 @ 1800 / 1800), controlled by the command Standard commands: GSM 7.07 and 7.05 Enhancement command: SIMCOM AT command, short message service - so you can send a small amount of data through the network, (ASCII or primitive sixteen), embedded TCP / UDP stack - allowing you to upload data to Web server, RTC support, optional serial port, speaker and headset jack, low power - 1.5mA (sleep mode), work The temperature range of the industry is --40 C to + 85 degree C Package including: 1 x Development Board Module Kit 1 x box packaging The colors deviation might differ due to different monitor settings, please kindly understand. Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so

Without technical support, buy again This baby is sim 900 gprs wireless module, 4 frequency module is available worldwide. Gprs shield expansion board is a serial port gsm/gprs wireless module.Can learn gsm/gprs mobile phone development, remote control equipment development, wireless meter reading, smart appliances, super remote control, etc. Gprs shield 100% compatible with all standard arduino development boards.Gprs shield is a 4 frequency gprs/gsm module,Support 4-mode frequency bands 850/900/1800/1900 mhz,Applicable at home and abroad,Sms text message available,Telephone,All mobile phones, such as gprs, have functions. Note: this is the new version (64m version), which supports text messages, while the old version supports text messages only. Interface description Description of use -computer debugging usb-ttl is ok.This module is powered by 5v-26v and recommends 5v 2a.When plugged into the arduino mainframe, the power supply must provide 2a current.The reason is that the gprs shield's operating current and maximum peak current require up to 2a, but the usb port cannot provide such a large current and must be supplied externally.The other way the supply outlet needle leads to 3.7-4.5v power supply suitable for lithium battery power supply.The serial port is perfectly compatible with arduino single chip microcomputer.Ttl serial port compatible 3.3 and 5v single chip microcomputer. -make sure your sim card is not locked 3.Gprs shield communication with serial transmission speed is best 19200 bps 8-n-1 (gprs shield default automatic matching serial transmission

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Description: Product categories: Development Board Module Kit Features: four frequency 850/900/1800/1900 MHz - suitable for all countries of the world's GSM network, GPRS multi slot 10/8, GPRS mobile station B class, conforming to GSM phase 2/2 +, 4 level (2 W @ 850/900 MHz), 1 (1 @ 1800 / 1800), controlled by the command Standard commands: GSM 7.07 and 7.05 Enhancement command: SIMCOM AT command, short message service - so you can send a small amount of data through the network, (ASCII or primitive sixteen), embedded TCP / UDP stack - allowing you to upload data to Web server, RTC support, optional serial port, speaker and headset jack, low power - 1.5mA (sleep mode), work The temperature range of the industry is --40 C to + 85 degree C Package including: 1 x Development Board Module Kit 1 x box packaging The colors deviation might differ due to different monitor settings, please kindly understand. Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so

SIM900 850/900/1800/1900 MHz GPRS/GSM Development Board Module Kit for Arduino If you want to see more, please click #toollover It is widely used and can be assembled by DIY, it is also easy to use and has a long service life. Features: Made of fine quality material, has a long service life. The GPRS shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 , 07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present onboard. Specifications: Material: PCB Control via AT commands: standard commands GSM 07.07 & 07.05 Short message service: can send small amounts of data over the network (ASCII or raw hexadecimal) Enhanced commands: SIMCOM AT commands Embedded TCP/UDP stack: allows you to upload data to a web server Low power consumption: 1.5mA (sleep mode) Industrial temperature range: -40°C to +85°C Function: works on GSM networks in all countries across the world, GPRS multi-slot class 10/8, GPRS mobile station class B, compliant to GSM phase 2/2+, class 4 (2 W @ 850 / 900 MHz), class 1 (1 W @ 1800 / 1900MHz), RTC supported, selectable serial port, speaker and headphone jacks Item size: 90 * 55 * 10mm / 3.5 * 2.2 * 0.4in Item weight: 39g / 1.4ounce Package size: 110 * 80 * 15mm / 4.3 * 3.1 * 0.6in Package weight: 40g / 1.4ounce Package List: 1 * SIM900 GPRS/GSM Shield Development Board Module Kit for Arduino Compa

Specification: Brand new Size: approx. 85*57*20mm Low Power Consumption: - 1.5mA(sleep mode) Industrial Temperature Range: -40℃ to +85℃ Feature: Quad-Band 850/900/1800/1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8. GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz). Class 1 (1 W @ 1800 / 1900MHz). The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Speaker and Headphone jacks. Fine workmanship and good performance. Easy to use. Long service life. Package included: 1 x SIM900 Module Note: Please allow 1-5mm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated sa

It is widely used and can be assembled by DIY, it is also easy to use and has a long service life. Features: Made of fine quality material, has a long service life. The GPRS shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 , 07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present onboard. Specifications: Material: PCB Control via AT commands: standard commands GSM 07.07 & 07.05  Short message service: can send small amounts of data over the network (ASCII or raw hexadecimal) Enhanced commands: SIMCOM AT commands Embedded TCP/UDP stack: allows you to upload data to a web server Low power consumption: 1.5mA (sleep mode) Industrial temperature range: -40℃ to +85℃ Function: works on GSM networks in all countries across the world, GPRS multi-slot class 10/8, GPRS mobile station class B, compliant to GSM phase 2/2+, class 4 (2 W @ 850 / 900 MHz), class 1 (1 W @ 1800 / 1900MHz), RTC supported, selectable serial port, speaker and headphone jacks Item size: 90 * 55 * 10mm / 3.5 * 2.2 * 0.4in Item weight: 39g / 1.4ounce Package size: 110 * 80 * 15mm / 4.3 * 3.1 * 0.6in Package weight: 40g / 1.4ounce Package List: 1 * SIM900 GPRS/GSM Shield Development Board Module Kit for Arduino Compa

___________♤ #Maib ♤___________ ✿Manufacturers direct sales,you can collect coupons before placing an order. ✈We ship within 48 hours! ❤Free Gifts:Follow Shop--Sent me Screenshot and Message on your order:"Free Gift",if not will be missed. ➷Wholesale retailers are welcome to negotiate long-term business with us! ☆☆☆☆☆5 Stars Ratings--Can get a 5% coupon Feature: -Development board provide 2 kinds of antenna interfaces to meet various needs. -Compatible with 3.3V and 5V automatic level, development module can adapt to 3.3V or 5V main control board. -Support RTC, optional serial port, development board's installation is simple, not require particularly complicated operations. -Applied in various environments with strong control ability, which can be convenient to use. -While structure is simple and small size, such a development board supports good wiring. Specification: Item Type: Development board Power Consumption: 1.5mA (sleep mode) Operating Temperature: -40°C to +85°C Material: Printed circuit board Package List: 1 x Development Board 1 x An

Specialty items Is_customized: Yes Operating temperature: - Name brand: Umean Dissipation power: - Voltage supply: - Number model: Hx711 Condition: New Type: Gprs / gsm shield development board Application: For arduino compatible Product description The gprs shield is based on sim900 module from simcom and compatible with arduino and its clones. The gprs shield provides you a way to communicate using the gsm cell phone network. The shield allies you to achieve sms, mms, gprs and audio via uart by sending at commands (Gsm 07.07, 07.05 and simcom enhanced at commands). The shield also has the 12 gpios, 2 pwms and an adc of the sim900 module (they are all 2v8 logic) present onboard. Features Quad-band 850 900 1800 1900 mhz would work on gsm networks in all countries across the world. Gprs multi-slot class 10 / 8 Gprs mobile station class b Compliant to gsm phase 2 / 2 + Class 4 (2 w @ 850 / 900 mhz) Class 1 (1 w @ 1800 / 1900mhz) Control via at commands - standard commands: Gsm 07.07 & 07.05 | Enhanced commands: Simcom at commands. Short message service - so that you can send small amounts of data over the network (ascii or raw hexadecimal). Embedded tcp / udp stack - allies you to upload data to a web server. Rtc supported. Selectable serial port. Speaker and headphone jacks Low power consumption - 1.5ma (sleep mode) Industrial

Description: Item type:tool Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Packing list: 1 * SIM900 GPRS/GSM Shield Development Board Note: due to different personal displays, light and contrast differences, there may be slight color difference between the picture and the real object. Due to different measurement methods, if there is a 2-3mm error, it is within the normal r

Description: Product categories: Development Board Module Kit Features: four frequency 850/900/1800/1900 MHz - suitable for all countries of the world's GSM network, GPRS multi slot 10/8, GPRS mobile station B class, conforming to GSM phase 2/2 +, 4 level (2 W @ 850/900 MHz), 1 (1 @ 1800 / 1800), controlled by the command Standard commands: GSM 7.07 and 7.05 Enhancement command: SIMCOM AT command, short message service - so you can send a small amount of data through the network, (ASCII or primitive sixteen), embedded TCP / UDP stack - allowing you to upload data to Web server, RTC support, optional serial port, speaker and headset jack, low power - 1.5mA (sleep mode), work The temperature range of the industry is --40 C to + 85 degree C Package including: 1 x Development Board Module Kit 1 x box packaging The colors deviation might differ due to different monitor settings, please kindly understand. Please tell us first when you have any problem, we will give you the best service and solve the problem ASAP. Thank you so

✨✨The product is a brand new product 🚛🚛All packages are usually sent out in 2~10 days 📦📦If the product is sent by mistake or damaged, we will exchange it for free or give you a refund Decription: Feature: The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone networks. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard. Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the networks (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx) Included: 1 x GPRS/GSM Development Board M

Sim900 quad band gsm gprs shield module arduino uno mega + antenna Feature: The gprs shield is based on sim900 module from simcom and compatible with arduino and its clones. The gprs shield provides you a way to communicate using the gsm cell phone network. The shield allows you to achieve sms, mms, gprs and audio via uart by sending at commands (gsm and simcom enhanced at commands). The shield also has the 12 gpios, 2 pwms and an adc of the sim900 module (they are all 2v8 logic) present onboard. Specifications: Quad-band mhz would work on gsm networks in all countries across the world. - gprs multi-slot class 10 / 8 - gprs mobile station class b - compliant to gsm phase 2 / 2 + - class 4 (2 w @ mhz) - class 1 (1 w @ mhz) - control via at commands - standard commands: Gsm enhanced commands: Simcom at commands. So that you can send small amounts of data over the network (ascii or raw hexadecimal). Embedded tcp / udp stack - allies you to upload data to a web server. Rtc supported. - selectable serial port. - speaker and headphone jacks - low power consumption - 1.5ma (sleep mode) - industrial temperature range - - 40c to + 85 c Application: M2m (machine 2 machine) applications. Remote control of applications. Remote weather station or a wireless sensor network. Vehicle tracking system with a gps module. Note: The sim900 input board is 5-26v 2a,we recommended current is more than 9v 2a Ensure your sim card is not locked Gprs shield communication baud rate is 19200 bps

P / n: Net-0006 ===================== Sim900 quad-band gsm gprs shield development board for arduino Feature: The gprs shield is based on sim900 module from simcom and compatible with arduino and its clones. The gprs shield provides you a way to communicate using the gsm cell phone network. The shield allows you to achieve sms, mms, gprs and audio via uart by sending at commands (gsm and simcom enhanced at commands). The shield also has the 12 gpios, 2 pwms and an adc of the sim900 module (they are all 2v8 logic) present onboard. Specifications: Quad-band mhz - would work on gsm networks in all countries across the world. Gprs multi-slot class 10 / 8 Gprs mobile station class b Compliant to gsm phase 2 / 2 + Class 4 (2 w @ mhz) Class 1 (1 w @ mhz) Control via at commands - standard commands: Gsm enhanced commands: Simcom at commands. Short message service - so that you can send small amounts of data over the network (ascii or raw hexadecimal). Embedded tcp / udp stack - allies you to upload data to a web server. Rtc supported. Selectable serial port. Speaker and headphone jacks Low power consumption - 1.5ma (sleep mode) Industrial temperature range - - 40c to + 85 c Application: M2m (machine 2 machine) applications. Remote control of applications. Remote weather station or a wireless sensor network. Vehicle tracking system with a gps module. Cauldron: Make sure your sim card is unlocked. The product is provided as is without an insulating enclosure. Please observe esd precautions specifically in dry (low humidity) weather. The factory default setting for the gprs shield uart is 19200 bps 8-n-1. Can be changed using at commands. Power select - select the power supply for gprs shield (external power or 5v of arduino) Power jack - connected to external 4.8~5vdc power supply Interface - connected to external antenna Port select - select either software port or hareware serial port to be connected to gprs shield Serial hardware - d0 / d1 of arduino Serial software - d7 / d8 of arduino Led status - tell whenther the power of sim900 is on Net light - tell the status about sim900 linking to the net Uart of sim900 uart pins breakout of sim900 Microphone - to answer the phone call Speaker - to answer the phone call Gpio, pwm and adc of sim900 gpio, pwm and adc pins breakout of sim900 Power key - power up and down for sim900 Note: The sim900 input board is 5-26v 2a,we recommended current is more than 9v 2a Ensure your sim card is not locked Gprs shield communication baud rate is 19200 bps 8-n-1 1x sim900 gsm gprs quad band shield module for arduino uno mega pa

------------------------------------------- Official store of kingcell @ shopee Arduino board & modules supplier --------------------------------------------- New chip sim900 (not 900a) Sim900 quadband gsm gprs serial module for arduino Quad-band 850 / 900 / 1800 / 1900 mhz - would work on gsm networks in all countries across the world. Gprs multi-slot class 10 / 8 Gprs mobile station class b Compliant to gsm phase 2 / 2 + Class 4 (2 w 850 / 900 mhz) Class 1 (1 w 1800 / 1900mhz) Control via at commands - standard commands: Gsm 07.07 & 07.05 | Enhanced commands: Simcom at commands. Short message service - so that you can send small amounts of data over the network (ascii or raw hexadecimal). Embedded tcp / udp stack - allies you to upload data to a web server. Rtc supported. Selectable serial port. Speaker and headphone jacks Low power consumption - 1.5ma (sleep mode) Industrial temperature range - - 40c to + 85 c Size: 8.5x5.7x2cm (ap

Sim900 description quad band gsm gprs shield module arduino uno mega + antenna Feature: The gprs shield is based on sim900 module from simcom and compatible with arduino and its clones. The gprs shield provides you a way to communicate using the gsm cell phone network. The shield allows you to achieve sms, mms, gprs and audio via uart by sending at commands (gsm and simcom enhanced at commands). The shield also has the 12 gpios, 2 pwms and an adc of the sim900 module (they are all 2v8 logic) present onboard. Specifications: Quad-band mhz would work on gsm networks in all countries across the world. - gprs multi-slot class 10 / 8 - gprs mobile station class b - compliant to gsm phase 2 / 2 + - class 4 (2 w @ mhz) - class 1 (1 w @ mhz) - control via at commands - standard commands: Gsm enhanced commands: Simcom at commands. So that you can send small amounts of data over the network (ascii or raw hexadecimal). Embedded tcp / udp stack - allies you to upload data to a web server. Rtc supported. - selectable serial port. - speaker and headphone jacks - low power consumption - 1.5ma (sleep mode) - industrial temperature range - - 40c to + 85 c Application: M2m (machine 2 machine) applications. Remote control of applications. Remote weather station or a wireless sensor network. Vehicle tracking system with a gps module. Note: The sim900 input board is 5-26v 2a,we recommended current is more than 9v 2a Ensure your sim card is not locked Gprs shield communication baud rate is 19200 bps

New chip sim900 (not 900a) Sim900 quadband gsm gprs serial module for arduino Quad-band 850 / 900 / 1800 / 1900 mhz - would work on gsm networks in all countries across the world. Gprs multi-slot class 10 / 8 Gprs mobile station class b Compliant to gsm phase 2 / 2 + Class 4 (2 w 850 / 900 mhz) Class 1 (1 w 1800 / 1900mhz) Control via at commands - standard commands: Gsm 07.07 & 07.05 | Enhanced commands: Simcom at commands. Short message service - so that you can send small amounts of data over the network (ascii or raw hexadecimal). Embedded tcp / udp stack - allies you to upload data to a web server. Rtc supported. Selectable serial port. Speaker and headphone jacks Low power consumption - 1.5ma (sleep mode) Industrial temperature range - - 40c to + 85 c Size: 8.5x5.7x2cm (ap