Servo futaba s3003

Futaba s3003 servo Specification detail: + pulse width control 1520usec neutral Required pulse: 3-5 volt peak to peak square wave Operating voltage: 4.8-6.0 volts. Operating temperature range: - 20 to + 60 degree c Operating speed (4.8v): 0.23sec / 60 degrees at no load Operating speed (6.0v): 0.19sec / 60 degrees at no load Stall torque (4.8v): 44 oz / in. (3.2kg.cm) Stall torque (6.0v): 56.8 oz / in. (4.1kg.cm) Operating angle: 45 deg. One side pulse traveling 400usec Continuous rotation fashionable: Yes Direction: Counter clockwise / pulse traveling 1520-1900usec Current drain (4.8v): 7.2ma / idle Current drain (6.0v): 8ma / idle Type: 3 pole ferrite motor Indirection drive potentiometer Plastic bearing type: Bearing Gear type: All nylon gears 12 '' wire length connector Dimensions: 1.6x0.8x1.4 (41x20 x 36mm) Weight: 1.3oz. (3

The s3003 servo is larger in shape and strength (torque) than the sg90 or mg90 micro servo. With a larger torque, the servo is more capable of moving arms / objects with heavier loads. The accuracy of the s3003 servo rounds is also quite high, It is suitable for project applications that require power and accuracy. - 0.23 seconds / 60 degrees at 4.8v, 0.19 seconds / 60 degrees at 6v. - torque: 44 oz-in (32 kg-cm) at 4.8v, 57 oz-in (4.1 kg-cm) at 6v - dimension: 40x20 x 36 mm - weight: 37g. Packages include servo arms, skrups, and carrying access

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! Welcome my store. If there are any questions please chat yes ka Swk (sby-

S3003 servo durable shell, 6KG torque! Compatible with various brands of receivers. Fast speed, large torque, high degree, complete accessories (including accessories not taken in the photo: screws, screw sleeves, shock-absorbing rubber pads). Suitable for car models, boat models, robots, mechanical arms, etc. Parameter: Futaba S3003 standard steering gear, used in remote control models of cars and boats. It can replace Futaba's S138, S148, S22, S38 and S12. parameter: Speed: 0.23 seconds/60 degrees (4.8V) 0.19 seconds/60 degrees (6V) Torque: 5.2kg/cm(4.8V) 6.1kg/cm(6V) Volume: 44L X 20W X 40H Weight: 37.2g Rotation angle: 180 degrees (90 degrees left and r

Price 1 set Technical parameters: Futaba s3003 standard servo for use on cars, Boats and other alternative futaba remote control model of s138, S148, S22, S38 and s12. Paramedics: Speed: 0.23 seconds / 60 degrees (4.8v) 0.19 sec / 60 degrees (6v) Torque: 3.2 kg / cm (4.8v) 4.1kg / cm (6v) Volume: 44l x 20w x 40h Weight: 37.2g. Rotation angle: 180 degrees (left and righ

Futaba s3003 futaba servo motor servo Feature: X cheat and strong. Easy to work with not need to program. X popular, lots of projects had been done before. X this servo motor can be used directly with arduino 's servo motor libraries. Specs: X model: Futaba s3003 Dead band: 0.100 ms. X control system: Pulse width control Working frequency: 20ms period / 50hz (analog control) X operating voltage: 4.8~6 v dc volts. Xoperating temperature range: - 0 to + 55 degrees c. X operating speed (4.8v): 0.200 sec / 60 degrees at no load X operating speed (6v) 0.160 sec / 60 degrees at no load X stall torque (4.8v): 9.4kg / cm X stall torque (6v): 11kg / cm X type motor: Brushed motor Xpotentiometer drive: Direct drive. X bearing type: No bearing X gear type: Plastic gears. X material case: Plastic Programmable: No. X wire length connector: 32.0cm (12.6 inch) X dimensions: 40.719.742.9mm Completeness: X1pcs futaba s3003 servo motor Source picture: Ebay (dot) com Cultivate reading before buying: X) color & size selection is only through the "information / note" column during the order, not through chat & diskussion. *) It is mandatory to document when opening a video package in case anything is inappropriate / damaged / defective as a condition of return in our store X) if you decide to buy then we assume you agree with the above rules X) do not accept any return & complaint "Read compulsory notes before transactions." "Check stock before order" "The product that has been bought cannot be returned." "Don 't accept return and complain in any form." Xnb: Please confirm or advise when the item reaches its destination. Happy shopping!

Technical parameters: Futaba s3003 standard servo for use on cars, boats and other alternative futaba Remote control model of s138, s148, s22, s38 and s12.. Paramedics: Speed: 0.23 seconds / 60 degrees (4.8v) 0.19 sec / 60 degrees (6v) Torque: 3.2 kg / cm (4.8v) 4.1kg / cm (6v) Volume: 44l x 20w x 40h Weight: 37.2g. Rotation angle: 180 degrees (left and righ

Original futaba s3003 standard servo Latest price: Rp.316000 Description: Inclusions One s3003 standard servo with preinstallled x shape servo horn Four brass eyes Four black rectangular rubber grommets (futm2348) Four servo mount screws One servo wheel 1-38 (35mm) in diameter One x-shape servo arm 1.5 (38mm) across One star shaped arm 1-14 (32mm) across Nylon gears. Specifications. Speed: 0.23 sec60 4.8v / 0.19 sec60 6v Torque: 44 oz-in (3.2 kg-cm) 4.8v / 57 oz-in (4.1 kg-cm) 6v Dimensions: 1.6x0.8x1.4 (1-916 x 1316x1 - 716) (40x20 x 36mm) Weight: 1.3oz (1-516oz) (37g) J type with approx. 5 lead connector Note: X the complete address content is included in the active no.hp to facilitate the delivery process X please make the address as plain as (street names, no houses, rt / rw etc.) to ease delivery X the resi will automatically be routed within 2x24 hours after the order is processed. X all the information on the existing product is in accordance with the circumstances X the red date of the holiday delivery ya sis:) Happy shopping: Sku: 3131 / 1226439504914202624

38g S3003 Standard Servo For RC Futaba HPI Tamiya Kyosho Duratrax GS racing Car truch Parameters: Speed: 0.23 seconds / 60 degrees (4.8V) 0.19 seconds / 60 degrees (6V) Torque: 3.2kg / cm (4.8V) 4.1kg / cm (6V) Volume: 44L X 20W X 40H Weight:

Number: Mtrd_s3003-srv Original made in taiwan servo s3003 futaba standard size futaba s 3003 Note: Just get what 's in the photo. It does not have a box, as it is part of the japanese futaba product package. The above price for 1 set (as in ph

38g S3003 Standard Servo For RC Futaba HPI Tamiya Kyosho Duratrax GS racing Car truch Parameters: Speed: 0.23 seconds / 60 degrees (4.8V) 0.19 seconds / 60 degrees (6V) Torque: 3.2kg / cm (4.8V) 4.1kg / cm (6V) Volume: 44L X 20W X 40H Weight: 3

Metal join disk for servo metal Available 2 variants: 1.Disk + 4 screws m3 2.Disk alone without m3 bolts Suitable for towerpro type servo mg995 mg996r futaba s3003 Servos sold separately in our store.. We also sell aluminum skeletons to ro

Stock per 14 des = 50pcs Utaba s3003 standard servo for use on cars, boats and other remote control Models. Alternative futaba of s138, s148, s22, s38 and s12. Paramedics: Speed: 0.23 seconds / 60 degrees (4.8v) 0.19 sec / 60 degree (6v) Torque: 3.2kg / cm & lt (4.8v) 4.1kg / cm & lt (6v) Volume: 44l x 20w x 40h Weight: 3

Sku: A17004 Technical parameters: Futaba s3003 standard servo for use on cars, boats and other alternative futaba remote control model of s138, s148, s22, s38 and s12.. Paramedics: Speed: 0.23 seconds / 60 degrees (4.8v) 0.19 sec / 60 degrees (6v) Torque: 3.2 kg / cm (4.8v) 4.1kg / cm (6v) Volume: 44l x 20w x 40h Weight: 37.2g. Rotation angle: 180 degrees (left and righ

S3003 standard servo for rc futaba car boat airplane 100% brand new. Bearing type: Bushing Torque: 44 oz-in (3.2 kg-cm) at 4.8v 57 oz-in (4.1 kg-cm) at 6.0v 19 sec / 60? 6.0v Speed:. 23 sec / 60? 4.8v Length: 1.6 "(40mm) x width:. 8" (20mm) x height: 1.4 "(44mm) 150mm wire connector Weight: 1.3 ounce (37.2 g

Weight: 38g No load speed: 0.14 seconds / 60 degrees (4.8V) 0.11 seconds / 60 degrees (6.0V) Stall torque: 8 kg / cm (4.8V) 11 kg / cm (6.0V) Operating temperature: -30 ~ 60 Celsius Deadband setting: 4ms Use voltage: 4.8-7.6V Cable length: 300mm colour:black material:Metal + plastic Package Contents: 4 * Servo For S3003Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Futaba description s3003 servo motor A servo motor is a rotary actuator that allows for precise control of the angular position. It consists of a motor coupled to a sensor for position feedback. It also requires a servo drive to complete the system. The drive uses the feedback sensor to precisely control the rotary position of the motor. This is called a closed-loop operation. By running the system closed-loop servo motors provide a high-performance alternative to stepper and ac induction motors. Features / specs: + pulse width control 1520usec neutral Current drain (4.8v): 7.2ma / idle Required pulse: 3-5 volt peak to peak square wave Current drain (6.0v): 8ma / idle Operating voltage: 4.8-6.0 volts. Direction: Counter clockwise / pulse traveling 1520-1900usec Operating temperature range: - 20oc to + 60oc Type: 3 pole ferrite motor Operating speed (4.8v): 0.23sec / 60 degrees at no load Indirection drive potentiometer Operating speed (6.0v): 0.19sec / 60 degrees at no load Plastic bearing type: Bearing Stall torque (4.8v): 44 oz / in. (3.2kg.cm) Gear type: All nylon gears Stall torque (6.0v): 56.8 oz / in. (4.1kg.cm) 12 length wire connector Operating angle: 45 deg. One side pulse traveling 40

🌌 Futaba s3003 servo motor 🔘🔘🔘 Product description Futaba s3003 standard servo Weight: 38g. Voltage range: 4.8-6.0v Speed: 0.23 sec / 60 degrees (4.8v) 0.19 sec / 60 degree (6v) Torque: 3.2kg / cm & lt (4.8v) 4.1kg / cm & lt (6v) Dimension 44l x 20w x 40h Rotation angle: 180 degrees (left and right 90) 🔘🔘🔘 🧐📨 Read compulsory notes before transactions 🧐📨 Check stock before order 🧐📨 The products that have been purchased cannot be returned 🧐📨 Do not accept any return & complaint in any form 🧐📨 Futaba s3003 servo

Features: -Chip, Chip Is Powerful, Fast Output, Fast, Safe And Stable. -Positioner, The Control Angle Is More Precise, The Operation Is Faster, And The Performance Is More Stable. -Silicone Wire, Wear-Resistant, High Temperature Resistant, Longer Service Life And Wider Range. -Small Accessories, Quality, Complete. Specifications: Material: Metal, Etc. Color: Black Model: S3003 / SG-5010 S3003 Size: 44*20*40mm (L*W*H) SG-5010 Size: 41*20*38mm (L*W*H) Aircraft Type: S3003 Standard High Torque Servo Toy Type: Electric Toy No Load Speed: 0.23 Seconds / 60 Degrees (4.8V), 0.19 Seconds / 60 Degrees (6V) Torque: 3.2KG/CM (4.8V), 4.1KG/CM (6V) Rotation Angle: 180 Degrees (90 Degrees Left And Right) S3003 Steering Gear Durable Shell, Three Kilograms Of Torque! Compatible With All Branded Receivers. Fast Speed, High Torque, High Precision, Complete Accessories. Suitable For Car Models, RC Models, Robots, Mechanical Arms, Etc. Aircraft Type: SG-5010 Standard High Torque Servo Toy Type: Electric Toy No Load Speed: 0.2 Sec / 60 Deg (4.8 V), 0.16 Sec / 60 Deg (6.0 V) Blocking Torque: 5.2 Kg / Cm (4.8V) 6.5 Kg / Cm (6.0V) Operating Temperature: -20 ° C ~ 60 ° C Dead Zone Setting: 4MS Use Voltage: 4.8V~6.0V Structural Points: Three-Stage Motor, Full Nylon Gear Structure, Ball Bearing, Connecting Cable Length 30MM Package Included: 1 * Standard Servo • If you wish to change details after you placed an order, please cancel the order within 30 minutes and place a new one. If you miss out the correct step your order will not be allowed to cancel order/change. • When received the parcel, please check before you click button "order received". • Please contact us if you have any concern before opening a dispute, give us an opportunity to resolve the pro

A servo motor is a rotary actuator that allows for precise control of the angular position. It consists of a motor coupled to a sensor for position feedback. It also requires a servo drive to complete the system. The drive uses the feedback sensor to precisely control the rotary position of the motor. This is called a closed-loop operation. By running the system closed-loop servo motors provide a high-performance alternative to stepper and ac induction motors. Features / specs: + pulse width control 1520usec neutral Current drain (4.8v): 7.2ma / idle Required pulse: 3-5 volt peak to peak square wave Current drain (6.0v): 8ma / idle Operating voltage: 4.8-6.0 volts. Direction: Counter clockwise / pulse traveling 1520-1900usec Operating temperature range: - 20 c to + 60 c Type: 3 pole ferrite motor Operating speed (4.8v): 0.23sec / 60 degrees at no load Indirection drive potentiometer Operating speed (6.0v): 0.19sec / 60 degrees at no load Plastic bearing type: Bearing Stall torque (4.8v): 44 oz / in. (3.2kg.cm) Gear type: All nylon gears Stall torque (6.0v): 56.8 oz / in. (4.1kg.cm) 12 length wire connector Operating angle: 45 deg. One side pulse traveling 40

Weight: 38g No load speed: 0.14 seconds / 60 degrees (4.8V) 0.11 seconds / 60 degrees (6.0V) Stall torque: 8 kg / cm (4.8V) 11 kg / cm (6.0V) Operating temperature: -30 ~ 60 Celsius Deadband setting: 4ms Use voltage: 4.8-7.6V Cable length: 300mm colour:black material:Metal + plastic Package Contents: 4 * Servo For S3003Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

★★★★ W futaba s3003 38g rc car boat truck airplane helicopter tamiya servo futaba s3003 38g rc car boat truck airplane helicopter tamiya The s3003 standard servo, used for rc car, boat and others, can be for the replacement parts s138, s148, s22, s38 and s12. Parameters: Speed: 0.23 s / 60 degrees (4.8v) 0.19 s / 60 degrees (6v) Torque: 3.2kg / cm (4.8v) 4.1kg / cm (6v) Size: 44x20 x 40 mm (pxlxt) Weight: 37.2g Rotation angle: 180 degrees (right and left 90) Thank you for trusting our st

Specifications: Size: 40x20x44mm Weight: 38g No load speed: 0.14 seconds / 60 degrees (4.8V) 0.11 seconds / 60 degrees (6.0V) Stall torque: 8 kg / cm (4.8V) 11 kg / cm (6.0V) Operating temperature: -30 ° C ~ 60 ° C Deadband setting: 4ms Use voltage: 4.8-7.6V Cable length: 300mm Package Included: 4x S3003 Standard Servo Notes: The colors may be a little difference for the different monitor display. Please allow minor deviation due to manual measureme

"Bismillah, The original photo of the product is drawn in the third. Well, it 's an 180-degree variant. Yeah. That image we got from the source on the internet. If you want an original picture, please chat us up first. Thank you. " Feature: X cheat and strong. Easy to work with not need to program. X popular, lots of projects had been done before. X this servo motor can be used directly with arduino 's servo motor libraries. ## "Specifies:" X model: Futaba s3003 clone Dead band: 0.100 ms. X control system: Pulse width control Working frequency: 20ms period / 50hz (analog control) X (rx) required pulse: 3.0~5 volt peak to peak square wave X operating voltage: 4.8~6 v dc volts. Xoperating temperature range: - 0 to + 55 degrees c. X operating speed (4.8v): 0.200 sec / 60 degrees at no load X operating speed (6v) 0.160 sec / 60 degrees at no load X stall torque (4.8v): 9.4kg / cm X stall torque (6v): 11kg / cm X type motor: Brushed motor Xpotentiometer drive: Direct drive. X bearing type: No bearing X gear type: Plastic gears. X material case: Plastic Programmable: No. X wire length connector: 32.0cm (12.6 inch) X dimensions: 40.719.742.9mm Completeness: - 1pcs futaba s3003 servo

Specification: Control system: + pulse width control 1520usec neutralcurrent drain (4.8v)7.2ma / idlerequired pulse: 3-5 volt peak to peak square wavecurrent drain (6.0v): 8ma / idleoperating voltage: 4.8-6.0 voltsdirection: Counter clockwise / pulse traveling 1520-1900usperating temperature: - 20 to +60 degree cmotor type: 3 pole ferriteoperating speed (4.8v)0.23sec / 60 degrees at no loadpotentiometer drive: Indirect driving speed (6.0v)0.19sec / 60 degrees at no loadbearing type: Plastic bearingstall torque (4.8v): 44 oz / in. (3.2kg.cm) gear type: All nylon gearsstall torque (6.0v): 56.8 oz / in. (4.1kg.cm)Wire length connector: 12 "operating angle: 45 deg. One side pulse traveling 400uspectimension: 1.6" x 0.8 "x 1.4" (41x20 x 36mm)360 modifiable: Yesweight: 1.3oz. (3

Futaba s3003 servo motor Futaba s3003 standard servo Weight: 38g. Voltage range: 4.8-6.0v Speed: 0.23 sec / 60 degrees (4.8v) 0.19 sec / 60 degree (6v) Torque: 3.2kg / cm & lt (4.8v) 4.1kg / cm & lt (6v) Dimension 44l x 20w x 40h Rotation angle: 180 degrees (left and right 90) Review summary Cultivate reading before buying: X) color & size selection only through the "information / note" column during the order, not through chat & diskussion. *) It is mandatory to document when opening a video package in case anything is inappropriate / damaged / defective as a condition of return in our store X) if you decide to buy then we assume you agree with the above rules X) do not accept any return & complaint "Read compulsory notes before transactions." "Check stock before order" "The product that has been bought cannot be returned." "Don 't accept return and complain in any form." Xnb: Please confirm or give a review when the item is reached by the customer. Happy shopping!

Weight: 38g No load speed: 0.14 seconds / 60 degrees (4.8V) 0.11 seconds / 60 degrees (6.0V) Stall torque: 8 kg / cm (4.8V) 11 kg / cm (6.0V) Operating temperature: -30 ~ 60 Celsius Deadband setting: 4ms Use voltage: 4.8-7.6V Cable length: 300mm colour:black material:Metal + plastic Package Contents: 4 * Servo For S3003Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Metal join disk for servo Available 2 variants: - disk + 4 screws m3 - just disk without an m3 bolt. Suitable for towerpro type servo mg995 mg996r futaba s3003 We also sell aluminum skeletons to robotic Happy shop

Weight: 38g No load speed: 0.14 seconds / 60 degrees (4.8V) 0.11 seconds / 60 degrees (6.0V) Stall torque: 8 kg / cm (4.8V) 11 kg / cm (6.0V) Operating temperature: -30 ~ 60 Celsius Deadband setting: 4ms Use voltage: 4.8-7.6V Cable length: 300mm colour:black material:Metal + plastic Package Contents: 4 * Servo For S3003Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

★★★★ Futaba s3003 technical parameters: Futaba s3003 standard servo for use on cars, Boats and other alternative futaba remote control model of s138, S148, S22, S38 and s12. Parameters: Speed: 0.23 seconds / 60 degrees (4.8v) 0.19 sec / 60 degrees (6v) Torque: 3.2 kg / cm (4.8v) 4.1kg / cm (6v) Volume: 44l x 20w x 40h weight: 37.2g rotation angle: 180 degrees (Left and right 90. ) Nb: Please confirm or give feedback when the item arrives. Thank