Reset canon ip2770

Chất liệu : Lithium-ion Dung lượng Pin :1250mAh Điện áp tiêu chuẩn : 7.2V Kích thước :47 * 65 * 19.3mm Bảo hành 6

No. All ic eprom, ic eeprom, ic reset, ic counter are adjusted and are confirmed to work 100%. If you have any obstacles, please return to the eprom ic that you bought at fixprint with your troubled printer mainboard. With the printer 's mainboard ic track record, nothing was severed or damaged. The company 's payroll is fully accounted for (free service installlation). Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770, ic 93c66wp Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to bre

Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770 Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to b

Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770 Condition: New Programd. 100% tested and running normally Printer support: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9

Ic eprom ip2770 t08, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770, ic canon t08 Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux Soldering iron iron iron tip tip ic, Make sure the tin fuses with the ic feet., This is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, Because if too hot a blower is used, the other components are damaged, causing the mainboard to fail or the pcb path to break up. No warranty. All ic eprom, ic eeprom, ic reset, ic counter are "adjustment" and are made sure to work 100%. If you have any obstacles, please return to the eprom ic that you bought at fixprint with your troubled printer mainboard. With the printer 's mainboard ic track record, nothing was severed or damaged. The company 's payroll is fully accounted for (free service installlati

Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770 Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to break. If there 's trouble the mainboard can be sent to us at a cost of installling 7

Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770, ic 93c66wp Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to break. To be safer on the way / expedition, please add https://shopee.co.id/Packing-Kardus-i.22439145.1209959544 https://shopee.co.id/Packing-Buble-Wrap-i.22439145.1209961893 https://shopee.co.id/Packing-Tambahan-Dus-dan-Buble-Wrap-i.22439145.12099

No. Warranty All ic eprom, ic eeprom, ic reset, ic counter are adjusted and are confirmed to work 100%. If you have any obstacles, please return to the eprom ic that you bought at fixprint with your troubled printer mainboard. With the printer 's mainboard ic track record, nothing was severed or damaged. The company 's payroll is fully accounted for (free service installlation). Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770, ic 93c66wp Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to bre

No. Warranty All ic eprom, ic eeprom, ic reset, ic counter are adjusted and are confirmed to work 100%. If you have any obstacles, please return to the eprom ic that you bought at fixprint with your troubled printer mainboard. With the printer 's mainboard ic track record, nothing was severed or damaged. The company 's payroll is fully accounted for (free service installlation). Ic eprom ip2770 canon, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770, ic 93c66wp Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9x too Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to bre

C eprom reset canon ip2770 new mini mobo ic type t08 4g08 To overcome blink printers or to fail reset. New ic It 's programd for canon ip2770 new model, just installl it No warranty Seldom the eprom ic is damaged during installlation, except in the wrong way, for example = using overheated blower For the big mobo type the old output please search this

Ic eprom ip2770 t08, ic eprom reset canon 2770, ic counter ip2770, resetter canon ip 2770, ic canon t08 Condition: New Programd. 100% tested and running normally Support for printer: Ic eeprom canon ip2770 How to installl new ic: Ice cream feet with flux The solder of the ic leg with a little tin, make sure tin is fused with the ic leg, this is done because the ic leg has never been hit by tin. Installl ic to the board according to its position, don 't reverse Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x Hot ic can be damaged and blink 9

Ic eprom reset canon ip2770 large mobo old ic type 93c66wp To overcome blink printers or to fail reset. New ic It 's programd for canon ip2770. No warranty Seldom the eprom ic is damaged during installlation, except in the wrong way, for example = using overheated blower For a small new mobo type, please look for it on the t