Mui khoan lo vuong

Vui lòng đọc kỹ thông tin trước khi đặt hàng, trong mục phân loại shop có chia ra 3 nhóm: Nhóm 1 là một bộ đầy đủ bao gồm 1 đầu khoét, 1 cán nối dài 20cm và 1 mũi khoan định tâm Nhòm 2 chỉ bán lẻ từng loại đầu khoét (không bao gồm cán) Nhóm 3 chỉ bán lẻ từng loại cán kèm mũi khoan định tâm (không bao gồm đầu khoét) * Quy cách kỹ thuật & ứng dụng : 1/ Đường kính mũi khoét bê tông gồm các số : 30 mm - 35 mm - 40 mm - 50 mm - 55 mm - 60 mm 2/ Cán đầu gài gồm 3 loại : 100 mm & 200 mm & 300 mm ( áp dụng cho tường dày 1 tấc, 2 tấc, 3 tấc) 3/ Thích hợp sử dụng cho máy khoan bê tông đầu gài tròn 4 rãnh ( loại máy khoan bê tông thông dụng nhất hiện nay ) 4/ Chuyên dùng khoét lỗ tường bê tông/gạch/xi-măng để gắn ống máy lạnh, ống nước trong công trình xây dựng và dân dụng. 5/ Tên gọi thường dùng : Mũi Khoét bê tông, mũi khoét lỗ bê tông, mũi khoan rút lõi bê tông ... * Ưu Điểm của sản phẩm : + Chất liệu thép hợp kim cao cấp + Khoét được nhiều loại tường bê tông, gạch đỏ, xi măng... + Chuyên khoét lỗ gắn ống máy lạnh, ống khói, ống nước, ống gas trong nhà bếp hiện đại + Có thể chọn mua đầu gài dài ngắn khác nhau tùy độ dày của tường

Tính năng sản phẩm: Với thợ mộc, việc đục mộng là một công việc thường xuyên. Với Mũi Khoan Khoét Lỗ Vuông- Mũi Khoan Mộng được lắp vào máy mộng cho phép đẩy nhanh tốc độ đục mộng với độ chính xác cao mà không phụ thuộc tay nghề thợ, góp phần giảm giá thành đồ gỗ. Mũi Khoan Khoét Lỗ Vuông- Mũi Khoan Mộng về cấu tạo, bao gồm một áo vuông bên ngoài có tác dụng như một mũi đục và một mũi khoan xoắn ốc bên trong để phá phôi gỗ Thích hợp sử dụng cho khoan bàn, nếu dùng khoan tay có thể kết hợp với búa Chuyên dùng cho việc tạo mộng vuông trên vật liệu gỗ Thông số kỹ thuật: Chuyên đục lỗ hình vuông, hình chữ nhật trên gỗ một cách nhanh chóng Thép gió HSS tôi nhiệt đạt độ cứng HRC 40-50 có thể sử dụng với gỗ cứng Đường kính các mũi đục : 1/4 6,35 mm Nâng cao năng suất lao động của thợ mộc Khối lượng: 220g #mũikhoan #muikhoan #muikhoet #khoankhoet #khoanmong #khoanmộng

Features: Square hole drill can not be used on an electric drill, drill square holes need to fit a square hole drill drilling (mortise and tenon machine) to use. Mortise and tenon square hole drilled by the terrible + outer sleeve in the middle of the combination. Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries. Specifications: Material: high-speed steel, Hardness: 56HRC Clamping shank diameter: 19mm (Round) 10mm diameter slotted (front square) Middle terrible diameter--total length: 19.5cm ,diameter: 6.8mm Product size: approx. 20.5*2*2cm/8.07*0.78*0.78'' Net weight: approx. 164g Use matters: Square hole drill is mainly used for woodworking aspects. Various existing bits, can only process a circular hole, square hole can not be processed, to machining square hole, must drill the hole or cutting machine processed crude hole, then chisel made from artificial hand. The utility model in the hole drilled by the rotary body, while the impact of the use of hammer impact force transmitted to the outer body, the material crushing round hole and square head wall, a one-time processing of a square hole, and the dust can be broken slag discharged from the tube. Using different specifications of the square hole drill, matching the appropriate power of the square hole machine, you can play a square hole to meet the requirements. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Included: 1 x Woodworking Square Hole

Specifications: The whole drill is heat treated,offering higher hardness. Partial black oxide treatment prevent rusty and provide beautiful appearance. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. The length is longer than the normal one. Application: suitable for carpentry, applicable to the construction, installation, decoration, decoration industry use. Mainly used in the square tenon machine, specially used for a drill square hole, it can be used on electric drill. Item Name: Square Hole Drill Bit Quantity: 4Pcs/Set Material: Steel Features: Durable, Practical, Woodworking Tools Length: 16.5cm/6.50", 20.5cm/8.07", 20.5cm/8.07", 21cm/8.27" (Approx.) Diameter: 1.3cm/0.51", 1cm/0.39", 0.8cm/0.31", 0.6cm/0.24" (Approx.) Notes: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 4 x Square Hole Dril

Features Color:As picture Size:Style1、Style2:Length 12cm width 1.4cm Style3:Length 15cm width 1.6cm Material:Metal Package Content: 1pc Warm Tips: -Conversion: 1 Inch=2.54CM; -Color may little vary due to different display setting; -Size might be slightly deviation due to hand measurement, please allow 1-2 cm differ

MŨI KHOAN KÍNH MŨI KHOAN KIẾNG MŨI KHOAN GỐM SỨ ĐÁ BÓNG KIẾNG Thông tin sản phẩm Quy cách đóng gói : 1 mũi khoan kiếng , quý khách chọn kích thước trong phân loại sản phẩm nhé Kích cỡ đầu mũi khoan : 6mm - 8mm - 10mm - 12mm - 21mm - 27mm - 42mm - 60mm Mũi khoan kính dạng trụ tròn ,chiều dài : 50 - 52mm Chất liệu : Hợp kim thép cứng, đầu mũi khoan bằng kim cương xi cát mờ Tốc độ khoan nhanh , không sứt mẻ. ỨNG DỤNG - Mũi khoan kính dạng ống trụ tròn là sản phẩm được sử dụng nhiều trong ngành kính, dùng để khoan lỗ tròn và mài bóng trên các bề mặt kính, gốm sứ, đá hoa cương, gạch men bóng kính ... #muikhoankinh #muikhoankieng #muikhoanda #muikhoansu #muikhoanbongkieng #khoankinh #muikhoankinh6mm #muikhoankinh8li ##muikhoankinh10li #muikhoankinh10mm #muikhoankinh12li #muikhoankinh12mm #muikhoankinh14mm #muikhoankinh14li #muikhoankinh21mm #muikhoankinh21li #muikhoankinh27mm #muikhoankinh27li #muikhoankinh42mm #muikhoankinh42li #muikhoankinh60mm #muikhoankin

-----------------------♥♥Product information-♥♥------------------- ------- ✔To be sent✔High quality✔Most favorable prices✔Brand new 100% ✔Minimum price✔Shopee logo✔Vendor information✔Invoices Surprise to you: ❀Focus on stores/praising goods: priority delivery and free gifts ☞Ps: if you want to get a free gift, please send me the screen of your store that you follow me and leave a message on your order.#Xiyijiaproduct Characteristics: -drill bit is forged from bearing steel. the overall heat treatment hardness is high and the service life is long. 2. U-type chip groove design, convenient chip removal, improve drilling efficiency. -the force of the bit cutting edge on a plane effectively prevents bursting at the beginning of use. -universal shank type, drill tail adopts circular design, more stable clamping. -well-done, perfect replacement for old drill bits Norms: Type of project: square hole drill bit material: bearing steel Model no. 11mm/12mm/12.5mm/12.7mm Application: suitable for wood products such as medium density fiberboard, medium density fiberboard, planer board, wood, suitable for square hole drilling, square tenonon Norms Square hole size Diameter of shank Groove depth Total length Weight 11mm (approx.) 11 mm/0.4 inch 8 mm/0.3 inch 60 mm/2.4 inch 195mm/7.7 inches 210 g/7.4oz 12mm (approx.) 12 mm/0.47 inch 10 mm/0.4 inch 60 mm/2.4 inch 195mm/7.7 inches 220 g/7.8oz 12.5 mm (approx.) 12.5mm/0.49 inches 10 mm/0.4 inch 60 mm/2.4 inch 195mm/7.7 inches 220 g/7.8oz 12.7 mm (approx.) 12.7mm/0.5 inches 10 mm/0.4 inch 60 mm/2.4 inch 195mm/7.7 inches 220 g/7.8oz Packing list: 1x11mm square hole drill bit 1x12mm square hole drill bit 1pcs 12.5mm square hole drill bit 1x12.7mm square hole dril

Với thợ mộc, việc đục mộng là một công việc thường xuyên. Với Mũi Khoan Khoét Lỗ Vuông- Mũi Khoan Mộng được lắp vào máy mộng cho phép đẩy nhanh tốc độ đục mộng với độ chính xác cao mà không phụ thuộc tay nghề thợ, góp phần giảm giá thành đồ gỗ. Mũi Khoan Khoét Lỗ Vuông- Mũi Khoan Mộng về cấu tạo, bao gồm một áo vuông bên ngoài có tác dụng như một mũi đục và một mũi khoan xoắn ốc bên trong để phá phôi gỗ Thích hợp sử dụng cho khoan bàn, nếu dùng khoan tay có thể kết hợp với búa Chuyên dùng cho việc tạo mộng vuông trên vật liệu gỗ Thông số kỹ thuật: Chuyên đục lỗ hình vuông, hình chữ nhật trên gỗ một cách nhanh chóng Thép gió HSS tôi nhiệt đạt độ cứng HRC 40-50 có thể sử dụng với gỗ cứng Đường kính các mũi đục : 1/4 6,35 mm Nâng cao năng suất lao động của thợ mộc Khối lượng: 22

Specifications: Features: - Alloy material, very strong. - Used for woodworking. - Edge for the arc tip drilling sets, superb sharpening process, the edge is more sharp and durable. - Standard chip flute design, easy to remove the side of the sawdust, improve drilling efficiency. Material: Alloy Color: See Pictures Type: Woodworking Tools Specification Modle: 3/8"(9.5mm) Package Include: 1 x Square Hole

❤ X ❤ X ❤ X ❤ X ❤ X ❤:: welcome to the #xguli store ❤ X ❤ X ❤ X ❤ X ❤ X xxxxx Note: ✨ Direct selling from the manufacturer to provide you with high quality and favorable products ✨ We 'll deliver the goods within 1 @ - @ 24 hours ✨ Rapid response within 10 minutes ✨ 100% inventory, please don't hesitate to buy it immediately ★ ★ ★ ★ Small surprise ★ ★ ★ ★ ☛ Five star praise: priority delivery and order 5% diskount 【My 3c electronic store: #guli】 Characteristics: - The drill bit is forged from bearing steel. it has high hardness and long service life after overall heat treatment. 2. U @ - @ type long row slot design, convenient wood chip diskharge, improve drilling efficiency. - Rig design, the force of the edge of the rig on a plane, effective protection against cracking at the beginning of use. - Universal handle shape, drill end is round design, so that clamping is more stable. - Suitable for density plate, medium fiber board, planer board, wood, etc.. Norms: Conditions: 100% new Type of product: Square hole drill bit type: 20 mm Material: Bearing steel Color: Weight as shown in figure: Approximately 363.0 g uses: Suitable for density plate, medium fiber board, planer board, wood and other wood products, suitable for square hole drilling machine, square tendon machine Packing list: 1 x square hole drill bit Note: - Allow errors of 1 @ - @ 3cm due to manual measurements. Thank you for your understanding. - The display is not calibrated, and the color of the item shown in the photo may be slightly different from the actual object. Please use actual figures as the crite

Specifications: It is made of high quality materials, which has high hardness, good toughness, rust protection and good anti-corrosion. This square bit socket set is perfect for use with breaker bars, torque wrenches, and ratchets. With mini size, it is lightweight, which is easy to carry. Item Name: Spline Bit Sockets Material: Chrome Vanadium Steel Quantity: 10Pcs/Set Features: Durable, Lightweight, Rustproof, Anti-Corrosion 12 Point Spline Bit: Bit M4/M5/M6 Square Bit Size: 1/4" (6.35mm), Length: 37mm/1.5" (Approx.) Bit M8/M9/M10/M12 Square Bit Size: 3/8" (10mm), Length: 48mm/1.9" (Approx.) 12 Point Middle Hole Bit: Bit M14 Square Bit Size: 3/8" (10mm), Length: 48mm/1.9" (Approx.) Bit MT6/M18 Square Bit Size: 1/2" (12.6mm), Length: 55mm/2.2" (Approx.) Notes: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 10 x Spline Bit So

Specifications: The whole drill is heat treated, offering higher hardness. This Mortising Chisel is great for drilling square holes in wood with a mortising machine or a mortising attachment. Mainly used in the square tenon machine, specially used for a drill square hole, and it also can be used on electric drill. Item Name: Square Hole Drill Bit Material: High Speed Steel Square Hole Drill Core: More than 210mm Cylinder Diameter of the Fixed Part: 19mm Product Attributes: 1/4", 5/16", 3/8", 1/2" Product Specifications: 1/4"(6.35mm), 5/16"(7.94mm), 3/8"(9.5mm), 1/2"(12.7mm) Features: Durable, Practical, Woodworking Tools, Square Hole Product Size: Length: 21.5cm/8.46", 20.9cm/8.23" (Approx.) Notes: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x Square Hole Dril

6mm/12.7mm Metric Square Hole Mortiser Drill core Bit Mortising Chisel Woodworking Electric drilled core Tool Mayitr ​Material: high speed steel Including : 1 pc drilled core Please check which Type and Size you need . Please note : Picture and Measurement just for reference.the actual delivered goods shall prev

Made of premium quality high speed steel with high hardness and durability, anti-rust. These square drill hole bits are suitable for construction, installation, renovation, decoration industry, etc. Features: Made of premium quality high speed steel with high hardness and durability, anti-rust. Crushing round bits and square outer wall, broken slag dust can be discharged from the tube. Exquisite blade grinding process, edge is shar-per and more sturdy. Reduce labor intensity of construction workers and speed up the construction. Drilling square holes in wood with a mortising machine or a mortising attachment. Suitable for construction, installation, renovation, decoration industry, etc. Specifications: Clamping cylindrical diameter: 19mm Type: 3/8"(9.5mm) Drill core: 3/8"(9.5mm) Package size: 230 * 35 * 35mm Package weight: about 220g Note: -Please allow 1-3mm differs due to manual measurement. -Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. -Square hole drill can not be used on an electric drill, drill square holes need to fit a square hole drill drilling (mortise and tenon machine) to use. -In case drill bits become overheated and get burned up due to fast rotary friction,we suggest use some cutting fluid to keep the bits cold during usage. Packing List: 1 * Square Hole

Characteristics: -made of high-speed steel.Heat treatment, hrc 48 50, high hardness, longer core, high concentricity. -it's very good for drilling holes in wood.Mainly for woodworking. -professional wood drill bits for decoration, construction, installlation, decoration, etc. -reducing the labor intensity of workers.Reduce the construction cost of installlation and decoration industry. -suitable for all tenonholes and drill fittings. Description: Use in conjunction with the machine.If the square hole is opened manually, hand-drill and hammer are required. Specifications: Material: steel Color: silver 尺寸:1/2英寸(12.7毫米),3/8英寸(9.5毫米),5/16英寸(7.94毫米),1/4英寸(6.35毫米)(可选) The package includes: 1 x square drill Notes: -images may not reflect the actual color of the project due to differences between different monitors.We make sure the style is the same as the picture. -allow deviation of 1-3 mm due to manual and different measurements.Than

100% new and high quality !!! Material: High speed steel Packaging includes: 1pcs Notes 1.As different computers display colors differently, the color of the actual item may vary slightly from the above images. 2.Please allow 1-3 CM differs due to manual measurement.1 Inch=2.54 cm, 1 cm=0.39 Inch. Thanks for your understa

Made of high-quality high-speed steel with high hardness and durability, rustproof.These square hole drill bits are suitable for construction, installlation, renovation, Decoration industry, etc. Characteristics: Made of high-quality high-speed steel with high hardness and durability, rustproof. Crushing round drill bits and square outer walls can remove broken slag dust from the tube. Delicate blade grinding process, blade sharper, stronger. Lighten the labor intensity of construction workers and speed up construction. Drill square holes on wood with a tenon slot machine or a tenon groove attachment. Suitable for construction, installlation, decoration, decoration and other industries. Specifications: Clamp cylinder diameter: 19mm Type: 3/8 (9.5 mm) Core drill: 3/8 (9.5 mm) Packing size: 2

All right! please remember that certification takes only a few steps~ If there is no certification, the goods will be cleared directly, the small shop will be empty, hope to understand each other, please complete the certification after the order! All cross @ - @ border shopping across taiwan requires certification, not just shrimp and small shop requirements~ After the first certification, you can go shopping happily without further trouble~ Remind again: The system will not allow shipment if the order is not certified Accreditation methodology: App - i @ - @ department of customs accreditation advisory or view the government notes page Accreditation curriculum: Talk to customer service Answer to questions: Talk to customer se

Name: Square saw Material: High speed steel Square hole drills cannot be used for electric drills, drill holes need to be suitable for drilling in square holes (Tenon and tenon machines) Use. The tenon and tenon holes are horrible + The coat drilled out in the middle of the combination. Reducing the labor intensity of construction personnel, speed up construction, reduction in construction, installation, rehabilitation, construction cost of decoration and other industries. Arc design, delicate and durable. Usage matters: Square hole drilling is mainly used in carpentry. Characteristics: Product size: 1/4 inches (6.4 mm), 5/16 inches (8 mm), 3/8 inches (9.5 mm), 1/2 inches (12.7 mm) Please leave a message and tell us the size you want. Otherwise we will send it out according to our inventory Weight: 1/4 inches (6.4 mm) - 122 g 5/16 inches (8 mm) - 138 g 3/8 inches (9.5 mm) - 153 g 1/2 inches (12.7 mm) - 217 g Please confirm the model before placing an order, thank you very much Note: Only one item in the packing If other sizes are required, you can communicate with us. Product characteristics: - direct sales of factory prices, the quality is reliable. - whole heat treatment, hrc 48-50, hardness is high. - core lengthening, concentricity is high. - for use with tenon machines, if manually open the square hole, need to use hand drill and hammer tools. Product specifications: 1/4" (6.35mm)、 5/16" (7.94mm)、 3/8" (9.5mm)、 1/2" (12.7mm)。 This size refers to the length of the square hole that is drilled out of the square hole. The cylindrical diameter of the clamping part is 19 mm in diameter. The square hole drill core sold by this shop is above 210 mm, belongs to the extended drill core. Product weight: 1/4" (6.35mm) - 135g 5/16" (7.94mm) - 140g 3/8" (9.5mm) - 160g 1/2" (12.7mm) - 215g Customer service: We will do our best to serve every customer. Your satisfaction is our honor. If you have any doubts or doubts about this item, please contact us, we will help you as much as possible. All our transactions will be processed and shipped in time. Positive feedback is very appreciated. Once feedback is left, we will provide appropriate feedback to the b

6mm/12.7mm Metric Square Hole Mortiser Drill core Bit Mortising Chisel Woodworking Electric drilled core Tool Mayitr Please note : Picture and Measurement just for reference.the actual delivered goods shall prevail ! ​Including : 1 pc 1-4 X 3-4 means 1/4 (Handle) - 3/4 (Size) 1-2 X 1-1-8 means 1/2 (Handle) -1-1/8 (Size) Please check which Type and Size you n

product details size: H01:6mm H02:8mm H03:10mm H04:12mm H05:16mm quantity: 1pc We only sell the best quality products Finally, if you have any questions, please chat with us! Thank you, happy shopping! Note -Due to the light and screen difference, the product's color may be slightly different from the pictures. -Please allow 0.5-2cm differences due to manual measurement. We will use the best products and services to help you. We hope that every customer will be happy every day ^_^ Warmly Remind: We are support purchasing and wholesale, No invoice in the package, directly send to your clients,Please kindly rest ass

XIN LƯU Ý: có 2 loại là bộ 5 mũi chuôi lục giác và bộ 5 mũi chuôi tròn, thông tin chi tiết của từng bộ vui lòng đọc mô tả và xem hình ảnh, giá cả khác nhau vui lòng chọn trong mục phân loại _ Chức năng: khoan lỗ đồng thời doa rộng phần đầu lỗ khoan để bắt vít chìm, mũ vít sẽ bằng phẳng theo bề mặt ván _ Thích hợp khoan trên các chất liệu như gỗ, nhựa, thạch cao, nhôm mỏng... _ Có thể điều chỉnh độ sâu mũi khoan, có thể thay mũi khoan khi hỏng _ Chất liệu mũi khoan: thép gió HSS 4241 phủ Titanium _ Chất liệu đầu doa và phần rập khóa lục giác: thép 45 _ Quy cách mũi khoan của bộ 5 mũi chuôi lục giác: 5# - 1.98mm 6# - 2.38mm 8# - 2.78mm 10# - 3.18mm 12# - 3.56mm _ Quy cách mũi khoan của bộ 5 mũi chuôi tròn: 6# - 2.38mm 8# - 2.78mm 10# - 3.18mm 12# - 3.56mm 14# - 3

❤Welcome to #Crazymallueb ❤Please relax and wait for your package to arrive after ordered^_^ ❤Please contact us first when you have any problem, we will give you the best service and solve the problem ASAP. ❤Happy Shopping Time Loveγou❤ Features: Square hole drill can not be used on an electric drill, drill square holes need to fit a square hole drill drilling (mortise and tenon machine) to use. Mortise and tenon square hole drilled by the terrible + outer sleeve in the middle of the combination. Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries. Specifications: Material: high-speed steel, Hardness: 56HRC Clamping shank diameter: 19mm (Round) 10mm diameter slotted (front square) Middle terrible diameter--total length: 19.5cm ,diameter: 6.8mm Product size: approx. 20.5*2*2cm/8.07*0.78*0.78'' Net weight: approx. 164g Use matters: Square hole drill is mainly used for woodworking aspects. Various existing bits, can only process a circular hole, square hole can not be processed, to machining square hole, must drill the hole or cutting machine processed crude hole, then chisel made from artificial hand. The utility model in the hole drilled by the rotary body, while the impact of the use of hammer impact force transmitted to the outer body, the material crushing round hole and square head wall, a one-time processing of a square hole, and the dust can be broken slag discharged from the tube. Using different specifications of the square hole drill, matching the appropriate power of the square hole machine, you can play a square hole to meet the requirements. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Included: 1 x Woodworking Square Hole

Specifications: The whole drill is heat treated, offering higher hardness. This Mortising Chisel is great for drilling square holes in wood with a mortising machine or a mortising attachment. Mainly used in the square tenon machine, specially used for a drill square hole, and it also can be used on electric drill. Item Name: Square Hole Drill Bit Material: High Speed Steel Square Hole Drill Core: More than 210mm Cylinder Diameter of the Fixed Part: 19mm Product Attributes: 1/4", 5/16", 3/8", 1/2" Product Specifications: 1/4"(6.35mm), 5/16"(7.94mm), 3/8"(9.5mm), 1/2"(12.7mm) Features: Durable, Practical, Woodworking Tools, Square Hole Product Size: Length: 21.5cm/8.46", 20.9cm/8.23" (Approx.) Notes: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x Square Hole Dril

----------------------- ♥♥ -Product Information - ♥♥ -------------------------- ✔Ready to send ✔High quality ✔Best price ✔Brand new 100% ✔Lowest Price✔ Shopee Logo ✔upplier Info ✔invoice Surprises for you: ☞PS: If you want a , please send me the screen that you follow my shop and leave a message on your order.#xiyijiaproduct Feature: -Drill bit is forged with bearing steel, the overall heat treatment hardness is high, and the service life is long. -U‐long chip flute designed is convenient for the discharge of wood chips and improves drilling efficiency. -The force of the cutting edge of the drill bit is on a plane, which effectively protects against bursting at the beginning of use. -Universal shank type, the drill tail adopts a circular designed, which makes the clamping more stable. -With great workmanship, the hole drill bit can perfect replacement for the old one Specification: Item Type: Square Hole Drill Bits Material: Bearing steel Model: 11mm/12mm/12.5mm/12.7mm Application: Suitable for wood products such as MDF, MDF, particle board, wood, etc., suitable for Square hole drills, Square tenon machines Specification Square hole size Shank diameter Grooving depth Total length weight 11mm(Approx.) 11mm / 0.4in 8mm / 0.3in 60mm / 2.4in 195mm / 7.7in 210 g / 7.4 oz 12mm(Approx.) 12mm / 0.47in 10mm / 0.4in 60mm / 2.4in 195mm / 7.7in 220 g / 7.8 oz 12.5mm(Approx.) 12.5mm / 0.49in 10mm / 0.4in 60mm / 2.4in 195mm / 7.7in 220 g / 7.8 oz 12.7mm(Approx.) 12.7mm / 0.5in 10mm / 0.4in 60mm / 2.4in 195mm / 7.7in 220 g / 7.8 oz Package List: 1 x 11mm Square Hole Drill Bits1 x 12mm Square Hole Drill Bits 1 x 12.5mm Square Hole Drill Bits 1 x 12.7mm Square Hole Drill

_ Công dụng: khoan gỗ, nhựa, thạch cao _ Bộ gồm 8 mũi: 3-4-5-6-7-8-9-10mm _ Đầu 3 ngạnh nhọn, thân xoắn, chuôi tròn _ Bề mặt các me xoắn có thể sơn phủ màu bạc nhiều hoặc ít tùy từng đợt sản xuất, chất lượng sản phẩm như

Hi, welcome to Jessiony store, this store is a homeware boutique. The quality is guaranteed, please rest assured to buy! The store has s on the shelves every day, you can choose to pay attention to get the store’s daily information. The shop is a new shop, and the current is very strong, so hurry up and buy it! The following are product details: Application: Mainly used for carpentry, applicable to the construction, installation, decoration, decoration industry use. Use: -Use matters: Square hole drill is mainly used for woodworking aspects. -Square hole drilling is used in the square tenon machine, specially used for a drill square hole, it can not be used on electric drill. Features -This Mortising Chisel is great for drilling square holes in wood Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries. -Fits mortising attachments with 3\/4 `collars Note: - Please allow a slight error due to manual measurements,belongs to the normal phenomenon. - And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank

Description: Designed with the long drill core and square chisel, this drill bit can help complete kinds of cutting works more easily and quickly. Comes with the high-end material, heat treatment and exquisite workmanship, this square hole drill bit has the advantages of higher hardness, rust and corrosion resistance. This square hole drill bit is made of high speed steel material. There are the square hole bits with different sizes of 14 to 30mm that you can choose. It is suitable for woodworking, carving and so on. Item Name: Square Hole Drill Bit Material:High Speed Steel Size Details: 14mm/15mm/16mm Drill Bit Size: 22cm x 2.5cm x 2.5cm/8.66" x 0.98" x 0.98" (Approx.) 18mm/19mm/20mm/22mm Drill Bit Size: 22cm x 3.3cm x 3.3cm/8.66" x 1.29" x 1.29" (Approx.) 25mm/30mm Drill Bit Size: 22cm x 4.3cm x 4.3cm/8.66" x 1.69" x 1.69" (Approx.) Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 X 30mm Drill Bit or 1 X 25mm Drill Bit or 1 X 22mm Drill Bit or 1 X 20mm Drill Bit or 1 X 19mm Drill Bit or 1 X 18mm Drill Bit or 1 X 16mm Drill Bit or 1 X 15mm Drill Bit or 1 X 14mm Dril

Hss woodworking router bit mortise chisel woodworking tool As an accessory to an electric drill machine. It is used to store wood for woodworking. Specs Eye size: 1 / 2 "(12.7 mm) 10mm shank drill bit set Eye length: 100 mm Total length: 2