Mua dc servo

Động cơ DC Encoder được sản xuất bởi hãng sản xuất động cơ servo Yaskawa(nhật bản). Động cơ được tháo từ máy photo coppy chạy cho cơ chế cần độ chính xác cao với độ phân giải xung khoảng 400 xung. Các đặc điểm nổi bật như THÔNG SỐ KỸ THUẬT - Điện áp hoạt động: 24V - Công suất động cơ: 60-80W - Vòng tua ước tính trong khoảng: 2500 rpm-3500rpm - Nguồn cấp cho encoder: 5VDC - Dây encoder (Đỏ-5V)+ (Đen 0V) + (2 dây tín hiệu A-B màu xanh và trắng) - Đường kính trục động cơ: 10mm Động cơ khi đến tay KH được test Encoder và test động cơ. Motor2hand cam kết có kiểm tra đảm bảo encoder và động cơ hoạt động tốt trước khi gửi cho KH. Ngoài ra với Encoder được bao test 1 tuần sau khi nhận

Tỷ số truyền: 1:30 Điện áp định mức:12V (320RPM – 0.15A -7.5kg.cm ở 160RPM) hay 6V (160RPM – 0.07A – 2kg.cm ở 80RPM) Encoder từ 2 kênh AB: 11 PPR (11 xung 1 vòng) Trục ra đường kính 6mm Phù hợp với các cọc đồng nối trục với các bánh xe mô hình V2 #servo #CHRGM_37 #động_cơ_ser

【8.3】DC 4.8-6V Digital Servo/ESC Consistency Tester for RC Helicopter Airplane Car Features: 1.Test Together: can be synchronized output control 4 servos. 2.Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. 3.PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz. 4.Adjustable:rotary potentiometers to decrease or increase the width of the output pulse. 5.3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Description: 1.This Digital Servo Tester is with high accuracy. 2.You can test control 4 servos at the same time and change the test modes as you need. 3.With rotary potentiometers, you can decrease or increase the width of the output pulse. Specifications: Material: Plastic Input voltage: DC 4.8~6V Output signal width: 800~2200us Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2. S-2-bit mode (Neutral) 3. S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Item weight:24g Item Size: 75mmx36mmx23mm Notice: Carefully read the instruction before any use, if you are a beginner, it's advisable to be assisted by an experienced adult. Package information: Package size: 140 x 98 x 30mm / 5.5 x 3.9 x 1.2in Package weight: 36g / 1.3oz Gift box package Package List: 1 x Digital Servo Tester / ESC Consistency Tester

Dc brushless servo motor focus fixed seat mount bracket holder Extra packing compulsory Suitable for brushless servo motor, denki focus 2 models of product 1 and 2 / or 3 and 4 are available Picture example

DC 4.8-6V Mini 3 Modes Digital Servo/ESC Consistency Tester Steering Gear Measurement for RC Helicopter Airplane Car Tool Features： Test Together: can be synchronized output control 4 servos. Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle. Adjustable: Rotating potentiometer can reduce or increase the output pulse width. 3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications： Color：Black Material: Plastic Input voltage: DC 4.8-6V Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2. S-2-bit mode (Neutral) 3. S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Size：7.5cm * 3.6cm * 2.3cm / 2.95 * 1.41 * 0.90in Weight：33g / 1.16oz Package List： 1 * Digital Servo Tester / ESC Consistency Tester #aircraftmeter #rchelicopterfpv #tester #rchelicoptertester #digitalservotester #servoconsistencytest #escconsistencytester #aircrafttester #Helicopter #servotesterforair

___________________❀HANHAN❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Feature: -This DC motor has a built‐in driver and a 100‐line dual‐channel encoder. -This motor voltage test can run at 12‐24V and is suitable for high‐precision control. 3. 12V no‐load speed is about 3100 rpm, 24V no‐load speed is about 6100 rpm. -The motor rotates smoothly and is very wear‐resistant, very practical. -It is made of high quality steel, which has a longer service life and more durable. Specification: Condition:100% Brand New Item Type: DC Micro Brushless Servo MotorOptional Type: 12V, 24VBuilt‐in driver, with 100‐line dual‐channel encoder, suitable for high‐precision control. Voltage test can run at 12‐24V, 12V no‐load speed is about 3100 rpm, 24V no‐load speed is about 6100 rpm. The motor is short. Simple Test Operation Method of Motor: Positive pole, negative pole, start line connects 1k resistor to the positive pole of the power supply to run. If you want to reverse, connect the positive and negative switching line to the 1k resistor and connect the positive pole of the power supply. Please switch between positive and negative poles when shutting down , So as not to damage the drive by instant forward and reverse surges. Brushless motor pay attention to the positive and negative is strictly prohibited to make mistakes, must use stabilized non‐surge DC power supply. Package List: 1 x DC Micro Brushless Servo

Động cơ DC Servo giảm tốc GA12 - N20 encoder được sử dụng trong các ứng dụng cần sự nhỏ gọn và chính xác, động cơ có kích thước siêu nhỏ, đi kèm encoder với số xung sau giảm tốc lên đến 210 xung / 1 vòng, hộp số động cơ được cấu tạo hoàn toàn bằng kim loại, thích hợp làm các mô hình, cơ cấu robot nhỏ, độ chính xác cao. Thông tin cơ bản sản phẩm : Điện áp sử dụng: 1.5 ~ 12VDC. Dòng điện sử dụng: < 60mA Tỷ số truyền: 1:30 (trước giảm tốc quay 30 vòng, sau giảm tốc quay 1 vòng) Tốc độ động cơ trước giảm tốc: 15000RPM Tốc độ động cơ sau giảm tốc: 500RPM Lực kéo: 0.2Kg*cm Số xung Encoder trước giảm tốc: 7 xung. Số xung Encoder sau giảm tốc: 210 xung. Động Cơ DC Giảm Tốc GA12-N20 Động Cơ DC Giảm Tốc GA12-N20 có thiết kế nhỏ gọn với hộp số bằng kim loại cho độ bền và độ ổn định cao, thích hợp cho các ứng dụng chế tạo Robot Mini, xe, thuyền,... Thông tin sản phẩm: Động Cơ DC Giảm Tốc GA12-N20 Điện áp sử dụng: 3~12VDC Kích thước: 37 x

đông cơ brushless DC không chổi than nidec servo BH55FT12-01 24V 12W là động cơ không chổi than dùng để chế quạt, máy mài, chế động cơ phát điện 3 pha,… - Không cần điện lưới vì động cơ BLDC dùng nguồn 1 chiều điện ắc quy 24VDC, nên rất thích hợp để chế quạt làm mát trong lúc mất điện mỗi khi nắng nóng. - Nhỏ gọn, lắp vừa khung quạt B4. - Motor mô men xoắn cao nên rất mạnh mẽ. - Khác với việc chế quạt từ những động cơ chổi than như động cơ 775, 555, 795,…, việc chế quạt từ động cơ brushless không chổi than 24v có ưu điểm giúp quạt bền hơn, tránh mòn chổi than, không toả nhiệt lớn, giảm tiếng ồn. - Động cơ hoạt động khi được cấp nguồn 24V và được điều khiển qua mạch xung. Lưu ý: sản phẩm là hàng tháo máy. Thông số kĩ thuật: - Kích thước: 82x55mm - Chiều dài trục: 20mm - Đường kính trục: 6.5mm - Điện áp sử dụng: 24VDC - Dòng tải: 0.5A - Công suất: 12W - Hãng sản xuất: Nidec

Features： Test Together: can be synchronized output control 4 servos. Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle. Adjustable: Rotating potentiometer can reduce or increase the output pulse width. 3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications： Color：Black Material: Plastic Input voltage: DC 4.8-6V Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2. S-2-bit mode (Neutral) 3. S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Size：7.5cm * 3.6cm * 2.3cm / 2.95 * 1.41 * 0.90in Weight：33g / 1.16oz Package List： 1 * Digital Servo Tester / ESC Consistency Tester #aircraftmeter #rchelicopterfpv #tester #rchelicoptertester #digitalservotester #servoconsistencytest #escconsistencytester #aircrafttester #Helicopter #servotesterforair

Động cơ DC Servo, DC encoder SE38BE27-001 24V-DC 4400RPM THÔNG SỐ SẢN PHẨM - Điện áp: 24VDC - Dòng không tải: 0.2A - Tốc độ: 4400RPM - Type: DC Servo - Đường kính trục: 5mm - Đường kính motor: 38mm - Chiều dài tổng thể: 130mm - Phân giải xung: 1

Specification: -Size: 12x8.5mm -Voltage: 3.5-6v -Continuous current: 1A, maximum current 1.5A -PWM range: 1000~2000US -Wire length: 200mm -Motor cable length: 20mm -Single board weight: about 0.4g (excluding wire) -BEC output: None -Direction of rotation: bidirectional, positive and negative, -Applicable motor: brush motor -Compatible with Futaba, JR, SANWA, Hitec Application: - RC Mini Car, DIY model airplane,rc mini drone / multicopter aircraft - Remote control model car,winch control circuit and other model parts - Used for 360 degree continuous rotation servo Feature:Digital circuit, no need for potentiometer to adjust the stop position Package include: 1pc

DC 4.8-6V Mini 3 Modes Digital Servo/ESC Consistency Tester Steering Gear Measurement for RC Helicopter Airplane Car Tool Overviews: 1.This Digital Servo Tester is with high accuracy. 2.You can test control 4 servos at the same time and change the test modes as you need. 3.With rotary potentiometers, you can decrease or increase the width of the output pulse. Features: 1.Test Together: can be synchronized output control 4 servos. 2.Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. 3.PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz. 4.Adjustable:rotary potentiometers to decrease or increase the width of the output pulse. 5.3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications: Material: Plastic Input voltage: DC 4.8~6V Output signal width: 800~2200us Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2. S-2-bit mode (Neutral) 3. S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Item weight:29g Item Size: 40*75*25 Notice: Carefully read the instruction before any use, if you are a beginner, it\'s advisable to be assisted by an experienced adult. Package List: 1 x Digital Servo Tester / ESC Consistency T

Specification: Brand new and high quality Material:Metal Color:Silver Shaft diameter: Approx. 6mm Size: Approx. 80x32x21mm(LxWxH) Rated voltage: DC12V Rated power: 2 ~ 3W Load speed: 0.6RPM/Min Rated torque: 20KG.CM Features: The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear motor, widely used to be installed the dimensions requirements strictly occasion Package included: 1xTorque Turbo Worm Geared Motor Note: Please allow 1-3mm errors due to manual measur

Features: Test Together: Can be synchronized output control 4 servos. Accurate Test: Used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. PPM Signal: With PPM signal test function in the display, the input PPM signal changes while the input the PPM signal synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, frequency 50Hz. Adjustable: Rotary potentiometers to decrease or increase the width of the output pulse. 3 Modes: S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications: Type: Digital Servo Tester Material: Plastic Color: Black Size(L*W*H):About 40x75x25mm Input Voltage: DC 4.8~6V Output Signal Width: 800~2200us Button The Select (Note: the key switch function, circulation patterns) -S-1 manual mode (Manual) -S-2-bit mode (Neutral) -S-3 automatic mode (Automatic) Keys Pulse Width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Package Included: 1pc x Digital Servo Tester Note: -Due to the light and screen difference, the item's color may be slightly different from the pictures. -Please allow 0.5-2 cm differences due to manual measure

Features: 1. It is very convenient to detect and set the virtual bit, jitter and median of the server. 2. This servo tester can connect two sets of servos or ESC 3. The tester has good stability and high accuracy 4. You just need to turn the knob, then detect the servo. 5. It is very useful for testing the governor or motor performance. It is equivalent to a "manual receiver" function, which simulates the transmitter rudder through the knob.   Specification: Condition: 100% Brand New Output: ≤15mA (5.0) Input: DC 4.2-6.0V Output Signal: 1.5ms ±0.5ms Adjustment Method: Manual, Automatic, Median.  Weight: Approx. 9g / 0.3oz Size: Approx. 46 * 32 * 15mm / 1.8 * 1.3 * 0.6in     Package List: 1Pcs Servo Tes

Động cơ DC Servo giảm tốc GA12 - N20 encoder được sử dụng trong các ứng dụng cần sự nhỏ gọn và chính xác, động cơ có kích thước siêu nhỏ, đi kèm encoder với số xung sau giảm tốc lên đến 210 xung / 1 vòng, hộp số động cơ được cấu tạo hoàn toàn bằng kim loại, thích hợp làm các mô hình, cơ cấu robot nhỏ, độ chính xác cao. Thông tin cơ bản sản phẩm : Điện áp sử dụng: 1.5 ~ 12VDC. Dòng điện sử dụng: < 60mA Tỷ số truyền: 1:30 (trước giảm tốc quay 30 vòng, sau giảm tốc quay 1 vòng) Tốc độ động cơ trước giảm tốc: 15000RPM Tốc độ động cơ sau giảm tốc: 500RPM Lực kéo: 0.2Kg*cm Số xung Encoder trước giảm tốc: 7 xung. Số xung Encoder sau giảm tốc: 210 xung. Động Cơ DC Giảm Tốc GA12-N20 Động Cơ DC Giảm Tốc GA12-N20 có thiết kế nhỏ gọn với hộp số bằng kim loại cho độ bền và độ ổn định cao, thích hợp cho các ứng dụng chế tạo Robot Mini, xe, thuyền,... Thông tin sản phẩm: Động Cơ DC Giảm Tốc GA12-N20 Điện áp sử dụng: 3~12VDC Kích thước: 37 x

----------------------- ♥♥ -Produkasyong Impormasyon - ♥♥ ------------------ ------- ✔Magpadala upang magpadala ng ✔High kalidad ✔Binungunang presyo ✔Brand bagong 100% ✔ Pinakamahusay na Presyo ng Dami ng Shopee ✔upplier Info ✔invoice Mga sorpresa para sa iyo: ❀ Sundin ang mga shop / "Tulad ng" Item: Priority Shipping & Free Gift ☞PS: Kung nais mo ng isang libreng regalo, mangyaring ipadala sa akin ang screen na sinusundan mo ang aking shop at mag-iwan ng mensahe sa iyong order. # Xiyijiaproduct Feature: 1. This DC motor has a built‑in driver and a 100‑line dual‑channel encoder. 2. This motor voltage test can run at 12‑24V and is suitable for high‑precision control. 3. 12V no‑load speed is about 3100 rpm, 24V no‑load speed is about 6100 rpm. 4. The motor rotates smoothly and is very wear‑resistant, very practical. 5. It is made of high quality steel, which has a longer service life and more durable. Specification: Condition:100% Brand New Item Type: DC Micro Brushless  Servo MotorOptional Type: 12V, 24VBuilt‑in driver, with 100‑line dual‑channel encoder, suitable for high‑precision control. Voltage test can run at 12‑24V, 12V no‑load speed is about 3100 rpm, 24V no‑load speed is about 6100 rpm. The motor is short.  Simple Test Operation Method of Motor: Positive pole, negative pole, start line connects 1k resistor to the positive pole of the power supply to run. If you want to reverse, connect the positive and negative switching line to the 1k resistor and connect the positive pole of the power supply. Please switch between positive and negative poles when shutting down , So as not to damage the drive by instant forward and reverse surges. Brushless motor pay attention to the positive and negative is strictly prohibited to make mistakes, must use stabilized non‑surge DC power supply. Package List: 1 x DC Micro Brushless  Servo Motor

Welcome to XIANGGELILA,Wish you have a good day . Description: CHIHAI MOTOR 6V 100/210/300RPM Encoder Motor DC Gear Motor Fixed Support Mounting Bracket for This Encoder Motor: Product ID: 1044065 Specification: Brand: CHIHAI MOTOR Model: GM25-370 Voltage: DC 6.0V Speed: 100/210/300RPM Shaft diameter: 4mm Length: 12mm Encoder motor end 11 signals Terminal connection length 20cm Outline Drawing: Note: Please note that the package includes one motor only. 100/210/300RPM is available. Package Included: 1 x Encoder Motor More Detail

___________________* ❤❤ * ujewndju* ❤❤ * ___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ☀️☀️ Surprises for you ☀️☀️ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ✈Shipping in 1 day Tip: If you want a free gift, please send me the screenshot that you follow my shop ☀️☀️ Attention ☀️☀️ ❀We will be based on your guests in your country to send the corresponding adapter plug. ➷Wholesale retailers are welcome to negotiate long-term business with us! #ujewndju _______________❀Product Information❀______________ Feature: 1. This miniature servo motor built‑in driver, come with 100‑line dual‑channel encoder 2. DC brushless servo motor is suitable for high accuracy control as industrial supplies 3. Voltage test can run at 12‑24V, 12V no‑load speed is about 3100 RPM, 24V no‑load speed is about 6100 RPM 4. This miniature servo motor come with stable inner structure and high working efficiency 5. Servo motor is practical and useful, helps a lot in your work, widely used in many fields Specification: Item Type: Servo Motor Optional Style: 12V, 24V Parameter: Built-in driver, come with 100-line dual-channel encoder 12V No-Load Speed: About 3100 RPM, 24V No-Load Speed: About 6100 RPM Simple Test Operation Method of The Motor: Positive pole, negative pole, the starting line can be connected to the positive pole of the power supply with a 1k resistor, if you want to reverse the forward and reverse switching line, connect the 1k resistor to the positive pole of the power supply, and switch between positive and negative poles when shutting down. So as not to damage the drive by instant forward and reverse surges. Package List: 1 x Servo Motor Note: Brushless motor pay attention to the positive and negative is strictly prohibited to make mistakes, must use stabilized non‑surge DC power supp

！High quality, please contact me in time if you have any questions, thank you！ Product Name : DC Motor Model : RS380 Rated Voltage : DC 1.5-18V Speed : 30000RPM Widely use for electric toys DIY, replacement for car model, helicopter model, boat model, etc. Shaft Size : 13 x 2.3mm / 0.5" x 0.08"(L*D) Motor Body Size : 38x 28mm / 1.5" x 1.1" (L*D) Main Color : Silver Tone Main Material : Metal Weight : 75g Package : 1 x DC Motor Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

-This Digital Servo Tester is with high accuracy. -You can test control 4 servos at the same time and change the test modes as you need. -With rotary potentiometers, you can decrease or increase the width of the output pulse. Features: -Test Together: can be synchronized output control 4 servos. -Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. -PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal Synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, Frequency 50Hz. -Adjustable:rotary potentiometers to decrease or increase the width of the output pulse. 5.3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications: Material: Plastic Input voltage: DC 4.8~6V Output signal width: 800~2200us Button the Select (Note: the key switch function, circulation patterns) -S-1 manual mode (Manual) -S-2-bit mode (Neutral) -S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Item Size: 75mmx36mmx23mm Notice: Carefully read the instruction before any use, if you are a beginner, it\'s advisable to be assisted by an experienced adult. Package List: 1 x Digital Servo Tester / ESC Consistency T

Welcome to my store! 1.This Digital Servo Tester is with high accuracy. 2.You can test control 4 servos at the same time and change the test modes as you need. 3.With rotary potentiometers, you can decrease or increase the width of the output pulse. Features: 1.Test Together: can be synchronized output control 4 servos. 2.Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. 3.PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal Synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, Frequency 50Hz. 4.Adjustable:rotary potentiometers to decrease or increase the width of the output pulse. 5.3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications: Material: Plastic Input voltage: DC 4.8~6V Output signal width: 800~2200us Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2. S-2-bit mode (Neutral) 3. S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Item Size: 75mmx36mmx23mm Notice: Carefully read the instruction before any use, if you are a beginner, it\'s advisable to be assisted by an experienced adult. Package List: 1 x Digital Servo Tester / ESC Consistency Tester HAVE A GOOD

- Điện áp hoạt động 24V DC - Hãng sản xuất: Japanese HITACHI - Tốc độ quay : 4400 RPM ( revolutions per minute ) - Đường kính thân : 38m. - Chiều dài tổng : 101.8mm ( including encoder) - Đường kính trục : 5mm - Chiều dài trục đầu ra: 25mm - Nguồn đầu ra : 19 W - Hàng thá

Welcome to my shop, wish you have a happy day!!! [ljc96592]DC 12V 714 Coreless Motor with 2KG Servo Drive Board for Robot DIY Accessories 100% Brand New and High Quality ! Weight: 3.5g Voltage: DC 12V No-load current: 20MA No-load speed: 43500RPM Package Include: 1PCS * DC

❀❀❀Welcome to Owuh store❀❀❀ ✔Ready ship ✔High quality ✔Best price ✔Brand new 100% We insist on the lowest price to sell the best quality items. ☞Follow shop/ “Like” Items: Priority Shipping & Free Gift (PS: If you want a free gift, please send me the screenshot that you follow my shop and leave a message on your order.) ★★★★★Welcome chat with us,Under your supporting, we could offer you much better services.★★★★★ ---------------------------------------------------❀ Product ❀--------------------------------------------------- Feature: 1. This DC motor has a built‑in driver and a 100‑line dual‑channel encoder. 2. This motor voltage test can run at 12‑24V and is suitable for high‑precision control. 3. 12V no‑load speed is about 3100 rpm, 24V no‑load speed is about 6100 rpm. 4. The motor rotates smoothly and is very wear‑resistant, very practical. 5. It is made of high quality steel, which has a longer service life and more durable. Specification: Condition:100% Brand New Item Type: DC Micro Brushless  Servo MotorOptional Type: 12V, 24VBuilt‑in driver, with 100‑line dual‑channel encoder, suitable for high‑precision control. Voltage test can run at 12‑24V, 12V no‑load speed is about 3100 rpm, 24V no‑load speed is about 6100 rpm. The motor is short.  Simple Test Operation Method of Motor: Positive pole, negative pole, start line connects 1k resistor to the positive pole of the power supply to run. If you want to reverse, connect the positive and negative switching line to the 1k resistor and connect the positive pole of the power supply. Please switch between positive and negative poles when shutting down , So as not to damage the drive by instant forward and reverse surges. Brushless motor pay attention to the positive and negative is strictly prohibited to make mistakes, must use stabilized non‑surge DC power supply. Package List: 1 x DC Micro Brushless  Servo Motor

❤❤❤Welcome to our Granty ❤❤❤ :) Here you have many choices to find something suitable for your own. :) At the same time our price is reasonable and we also have a lot of sales promotions. :) To thank the deeply love of all the new and old customers,there are also many beautiful gifts to you. ----- (:(:(:❤Remember to follow us please❤:):):)----- Feature: -This DC motor has a built‐in driver and a 100‐line dual‐channel encoder. -This motor voltage test can run at 12‐24V and is suitable for high‐precision control. 3. 12V no‐load speed is about 3100 rpm, 24V no‐load speed is about 6100 rpm. -The motor rotates smoothly and is very wear‐resistant, very practical. -It is made of high quality steel, which has a longer service life and more durable. Specification: Condition:100% Brand New Item Type: DC Micro Brushless Servo MotorOptional Type: 12V, 24VBuilt‐in driver, with 100‐line dual‐channel encoder, suitable for high‐precision control. Voltage test can run at 12‐24V, 12V no‐load speed is about 3100 rpm, 24V no‐load speed is about 6100 rpm. The motor is short. Simple Test Operation Method of Motor: Positive pole, negative pole, start line connects 1k resistor to the positive pole of the power supply to run. If you want to reverse, connect the positive and negative switching line to the 1k resistor and connect the positive pole of the power supply. Please switch between positive and negative poles when shutting down , So as not to damage the drive by instant forward and reverse surges. Brushless motor pay attention to the positive and negative is strictly prohibited to make mistakes, must use stabilized non‐surge DC power supply. Package List: 1 x DC Micro Brushless Servo

✡ Welcome To Newtimingbuild ✡ 1.This Digital Servo Tester is with high accuracy. 2.You can test control 4 servos at the same time and change the test modes as you need. 3.With rotary potentiometers, you can decrease or increase the width of the output pulse. Features: 1.Test Together: can be synchronized output control 4 servos. 2.Accurate Test: used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle changes. 3.PPM Signal: with PPM signal test function in the display, the input PPM signal changes while the input the PPM signal Synchronization output to the servo Energized automatically enter manual mode (Manual) 20us 50H analog servo signal cycle, Frequency 50Hz. 4.Adjustable:rotary potentiometers to decrease or increase the width of the output pulse. 5.3 Modes:S-1 manual mode (Manual)/S-2-bit mode (Neutral)/S-3 automatic mode (Automatic) Specifications: Material: Plastic Input voltage: DC 4.8~6V Output signal width: 800~2200us Button the Select (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2. S-2-bit mode (Neutral) 3. S-3 automatic mode (Automatic) Keys pulse width: 1. 50H analog servo signal cycle 20us frequency 50Hz 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz 3. 250H Digital Servo signal cycle 4us frequency 250Hz Item Size: 75mmx36mmx23mm Notice: Carefully read the instruction before any use, if you are a beginner, it\'s advisable to be assisted by an experienced adult. Package List: 1 x Digital Servo Tester / ESC Consistency T

100% Brand New and High Quality ! Weight: 3.5g Voltage: DC 12V No-load current: 20MA No-load speed: 43500RPM Package Include: 1PCS * DC

Nguồn Gốc Sản phẩm: cc-smart.net/vi/san-pham/motor-driver/ Tính Năng: 1 Driver MSD_E10A (New) 1 Động cơ Nisca 24V, 30W(Used). 1 Encoder Quang 100 [PPR]. Driver: 10-28VDC, 0-10A, 1-200W. Điều khiển vị trí, vận tốc, gia tốc. Công cụ tự động dò thông số PID. Hiển thị các thông số qua LED 7 đoạn. Bảo vệ quá dòng, quá nhiệt, ngắn mạch. Phát hiện Encoder hư, mất Phase động cơ. Bảo vệ khi sai số vượt ngưỡng cho phép. Hỗ trợ giao tiếp USB với app DcTurningPro Hỗ trợ COM ảo để giao tiếp với người dùng. Phương thức giao tiếp: Pulse/Dir, UART, USB, Analog (Velocity mode) Chế độ H-Bridge với các tính năng bảo vệ quá dòng, quá nhiệt. Tích hợp các bộ điều khiển vòng kín: SmartPID, PID, PI, State feedback. Miêu Tả: Combo bao gồm một động cơ Dc Servo Motor (Nisca NF5475 200PPR) và một Dc Servo Driver MSD_E10A đã được cấu hình tương thích cùng nhau. Người dùng có thể sử dụng tín hiệu Pulse/Dir để điều khiển trực tiếp mà không cần cấu hình gì thêm (tương tự như driver động cơ bước). Hỗ trợ đầy đủ các tính năng sẵn có của Driver Servo MSD: Giao tiếp bằng xung/chiều, Uart, Com Ảo. Bảo vệ quá tải, quá dòng, quá nhiệt. Phat hiện encoder hư, động cơ hư... Sử dụng điều khiển vị trí, vận tốc và gia tốc. Combo phù hợp cho những ứng dụng vừa và nhỏ, cần điều khiển góc (vị trí) hoặc điều khiện tốc độ của một cơ cấu chấp hành, robot nào đó. Có phần mềm hỗ trợ, tích hợp nhiều phương pháp điều khiển trực quan khác nhau, với các thông số PID có thể điều chỉnh được. Giúp người dùng có thể dễ dàng hiểu, kiểm tra chất lượng của bộ điều khiển ngay lập tức. Ở chế độ ngõ vào tín hiệu từ UART, driver có thể kết nối nhiều driver lại cùng nhau như một mạng các driver với địa chỉ xác đinh. Giúp cho board chủ (Master) có thể điều khiển (gửi các tham số xuống) được nhiều driver MSD (Slave) cùng lúc trên 1 đường UART. Cũng trong chế độ UART, người dùng có thể đọc trực tiếp các thông số vị trí hiện tại, vận tốc hiện tại, dòng điện hiện tại. Cũng như các mã lỗi nếu có từ một driver slave. Ở chế độ ngõ vào điều khiển Xung/Chiều (Pulse/Dir): Cứ 1 tín hiệu xung đẩy vào chân Pulse của driver, Nó sẽ quay một góc tương ứng với xung đó theo chiều được xác định bằng chân Dir (mức Logic chân Dir 1: chiều thuận hoặc 0: chiều nghịch) Driver cũng có thể cấu hình như một mạch cầu H nhận tín hiệu điều khiển qua UART với các tính năng bảo vệ quá tải, quá nhiệt và ngắn mạch. Driver có 1 cổng USB, cổng này sẽ xuất hiện như 1 cổng COM ảo (Virtual Com) nếu không thể kết nối được với phần mềm DcTuringPro sau khi Driver khởi động 15s. Giúp người dùng có thể dễ dàng dùng bất cứ phần mềm nào hỗ trợ Serial để giao tiếp với driver. Mặc dù driver rất nhỏ gọn nhưng tích hợp đầy đủ các tính năng của một Dc Servo Driver công nghiệp rất phù hợp cho những ứng dụng robot, máy tự động nhỏ, đơn lẻ và cần giá thành cực t

Feature: 1. This DC motor has a built‑in driver and a 100‑line dual‑channel encoder. 2. This motor voltage test can run at 12‑24V and is suitable for high‑precision control. 3. 12V no‑load speed is about 3100 rpm, 24V no‑load speed is about 6100 rpm. 4. The motor rotates smoothly and is very wear‑resistant, very practical. 5. It is made of high quality steel, which has a longer service life and more durable. Specification: Condition:100% Brand New Item Type: DC Micro Brushless  Servo MotorOptional Type: 12V, 24VBuilt‑in driver, with 100‑line dual‑channel encoder, suitable for high‑precision control. Voltage test can run at 12‑24V, 12V no‑load speed is about 3100 rpm, 24V no‑load speed is about 6100 rpm. The motor is short.  Simple Test Operation Method of Motor: Positive pole, negative pole, start line connects 1k resistor to the positive pole of the power supply to run. If you want to reverse, connect the positive and negative switching line to the 1k resistor and connect the positive pole of the power supply. Please switch between positive and negative poles when shutting down , So as not to damage the drive by instant forward and reverse surges. Brushless motor pay attention to the positive and negative is strictly prohibited to make mistakes, must use stabilized non‑surge DC power supply. Package List: 1 x DC Micro Brushless  Servo Motor