Mach sac pin tu dong ngat

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Description: 12 V automatic charging power control protection board will automatically charge when the battery voltage drop to about 10.5 V (low voltage adjustable) , and shut off when the power is about 14.4 V (adjustable). Red light on when charging, off when fully charged. Relay disconnect and 220 V input end charging, thereby save energy. Features: 1, Assembled with special voltage control IC and special automobile relay. 2, Small volume and large current. 3, Voltage shutoff accurate and stable. 4, Complete functions and reliable performance. 5, Automatically charge and shut off. Instruction: Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port. The charger must be full bridge rectified output. The DC output voltage can be between 13.8 and 14.8 V. Charging test for the first time: battery voltage should be about 10 V. Function 1: Current cannot be larger than 10 A. Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong. Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning. Adjustment: VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher) VR2 relay connected and began to charge when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher) Specifications: Default Value: Low Voltage: 10.5V Shutoff Voltage: 14.8 V (adjustable, might be different) Wiring Method: Please wire according to instruction. Do not change wiring Size of PCB: 55x33mm/2.17x1.30" Quantity: 1 Pc Note: 1, Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding. 2, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding. 3, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard Package includes: 1 x Charging Control

_______♤Welcome Iuxishop Store♤___________ ✔Ready Stock ✔COD ✔Quality Checked ✔Whole Items: Good Quality/Ready Stock/Original/Wholesale Price ✔Shipping Time: 5-14 usually 8 days from China ★Surprises for you★ ☛Free Gifts:Follow Shop ❤“Like” 5 Items: Priority Shipping ⚠️( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug) 【After-sale】: If there are any problem, please contact us firstly, we will try our best to solve it. __________________❀Product Information❀__________________ Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v  in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output  Voltage error:+/-0.1V  Application Fields: 6-60V storage battery  Size:81*54*24mm/3.19*2.13*0.94inch   Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action,  stop button plays the role of Down -adjust action 1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value  2.Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. 3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.  Package Included: 1 x Battery Charge Control Module

Đặc trưng: Tính năng bo mạch tăng cường micro usb kép của pin lithium li-ion 18650 Đèn LED hiển thị nguồn, trạng thái không hoạt động tự động ngắt thông minh; Tích hợp IC bảo vệ pin lithium, bảo vệ quá dòng, quá áp, quá áp; Thông số bảng mạch tăng cường micro usb kép 18650 Lithium li-ion Cổng đầu vào: MicroUSB (miệng Andrews) Yêu cầu đầu vào: Nguồn điện áp không đổi 5V có thể được thực hiện để sạc nguồn điện đầu vào, bộ sạc phù hợp nhất cho 5V1A ở trên Cổng đầu ra: USB Thông số đầu ra: 5V1A / 5V2A Kích thước: 8 X 32 X 69 mm (H * W * L) Các yêu cầu của bảng mạch tăng cường micro usb kép cho pin lithium li-ion 18650 đối với pin có thể sạc lại: Pin có sẵn: pin 18650, pin điện thoại di động, pin phẳng, pin MP3, v.v. Pin lithium polymer 3.7V-4.2V có thể là nguồn cung cấp điện một phần (chip), cũng có thể là nguồn cung cấp điện song song nhiều phần (chip) (không trong loạt, không theo loạt). (Lưu ý: tăng công suất song song, mắc nối tiếp là tăng điện áp, chỉ có thể sử dụng song song!) Có thể đấu song song 2-6 pin 18650. Không có sẵn Pin: pin khô, pin, pin sạc 1,2V, pin niken-kim loại hyđrua, pin lithium polymer polymer 3.2V sắt. Pin 18650 Lithium li-ion kép cài đặt bo mạch tăng cường micro usb cần chú ý điểm sau pin phải được song song, điện áp giữa 3.2-4.2V để làm việc, 18650 phẳng và pin polymer có thể được; pin được kết nối với bo mạch chủ B + truy cập âm B-, được lắp đặt bo mạch chủ chống cháy; pin cũ và mới, mẫu mã, nhãn hiệu pin không nhất quán không thể trộn

Bộ Sạc Ắc Quy Tự Động 12V Có Đèn Báo Tình Trạng Sạc Hỗ Trợ Bình Có Dung Lượng Pin 20AH Tích Hợp Mạch Bảo Vệ An Toàn Giới thiệu: Sản phẩm có kích thước nhỏ gọn, màu vàng sáng. Bộ sạc được làm từ nhựa PC cách điện, có bố trí 2 dàn khe tản nhiệt ở 2 bên hỗ trợ làm mát dàn linh kiện bên trong. Bộ sạc dễ dàng sử dụng bạn chỉ cần gắn phần kẹp đen vào chân điện âm, kẹp đỏ vào chân điện dương của bình ắc quy, sau đó bạn cắm điện là bộ sạc sẽ hoàn toàn tự động sạc, không cần thao tác gì thêm. Quá trình sạc diễn ra nhanh và an toàn hơn các bộ sạc phổ thông, với đèn tín hiệu báo sạc tích hợp, bạn dễ dàng theo dõi quá trình sạc. Bộ sạc hỗ trợ sạc cho các dòng ắc quy của xe máy, xe đạp điện, … có điện áp 12V dung lượng dưới 20AH. Thông tin sản phẩm: Mô hình: bộ sạc bình xe máy Model: YX12V2A Chất liệu: nhựa PC, linh kiện điện tử Kích thước sản phẩm: như hình đăng tải Trọng lượng: 250gr Dòng điện đầu vào: 220V 50hz Dòng điện đầu ra: 12 - 14.4V/ 2A Hỗ trợ sạc tối đa cho bình có dung lượng: 20AH Tích hợp mạch bảo vệ ngắn mạch, quá tải Bộ sản phẩm bao gồm: 1x bộ sạc ắc quy 1x hộp đựng Hướng dẫn sử dụng: Trước khi sạc, đảm bảo là bộ sạc và ắc quy trong tình trạng khô ráo Gắn kẹp đen vào tiếp điểm âm, kẹp đỏ vào tiếp điểm dương của bình ắc quy Sau đó cắm điện và bộ sạc sẽ tiến hành sạc tự động. Trong quá trình sạc, đèn hiệu màu đỏ là đang sạc, đèn hiệu màu xanh lá là bình đã sạc đầy Thời lượng sạc bình xe máy phổ thông khoảng hơn 2 giờ đồng hồ *** Lưu ý: không để quên bình trong quá trình sạc, không sạc bình quá 5 giờ. #bosac #sacacquy #acquy #12v #sacxemay #xemay #sacbinh #sacbinh12v #sacacqu

Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v  in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output  Voltage error:+/-0.1V  Application Fields: 6-60V storage battery  Size:81*54*24mm/3.19*2.13*0.94inch   Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action,  stop button plays the role of Down -adjust action 1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value  2.Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. 3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.  Package Included: 1 x Battery Charge Control Module

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Features: 1, Assembled with special voltage control IC and special automobile relay. 2, Small volume and large current. 3, Voltage shutoff accurate and stable. 4, Complete functions and reliable performance. 5, Automatically charge and shut off. Specifications: Size of PCB: 50 x 32 x 18 mm Default Value: Low Voltage: 10.5 V Shutoff Voltage: 14.8 V (adjustable, might be different) Wiring Method: Please wire according to instruction. Do not change wiring. Instruction: Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port. The charger must be full bridge rectified output. The DC output voltage can be between 13.8 and 14.8 V. Charging test for the first time: battery voltage should be about 10 V. Function 1: Current cannot be larger than 10 A. Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong. Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning. Adjustment: VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher) VR2 relay connected and began to charge when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher) Package includes: 1 x Charging Control Board Note: 1, Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding. 2, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding. 3, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as stan

Condition:New Type:Voltage Regulator Dissipation Power:normal el Number:XH-M601 Operating Temperature:normal Supply Voltage:13.8V-14.8V Charging type:12V battery Voltage detection:DC voltmeter Power Supply:13.8V-14.8V Relay closing voltage:12.4V Voltage error:±0.1V Relay off voltage:14.8v size:50x32x18mm Material:PCB colour:Photo Color Package Contents: 1 * XH-M601 Circuit BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off. The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V Relay Operating Voltage:12.4V Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter Charging Type:12V storage battery Potentiometer Adjustment:RP1, RP2 Size:about 50*32*18mm Potentiometer Adjustment: -RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) -RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board Notes: Transition: 1cm=10mm=0.39inch -Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! -Please allow 1-3cm measuring deviation due to manual measure

______________♤Welcome RRIIOO Store♤_______________ ✔Ready Stock!!Buy Now! ✔Quality Checked ✔Best price ★Surprises gift for you★ ☛Coupon:Follow Shop ✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug) ➷Wholesale retailers are welcome to negotiate long-term business with us! __________________❀Product Information❀__________________ Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output Voltage error:+/-0.1V Application Fields: 6-60V storage battery Size:81*54*24mm/3.19*2.13*0.94inch Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action, stop button plays the role of Down -adjust action -Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value -Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. -Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings. Package Included: 1 x Battery Charge Control M

Rất tiếc cho TTIITT !!! Giao hàng: Chúng tôi sẽ giao hàng trong vòng 2 ngày sau khi nhận được đơn đặt hàng và đến bên bạn sau 10 - 15 ngày. Bạn có thể vào trang chủ của cửa hàng để nhận phiếu giảm giá trước khi mua sắm. Nếu bạn chưa nhận được hàng, xin vui lòng cho chúng tôi biết và chúng tôi sẽ xử lý các thủ tục cho bạn. Chúng tôi đang bắt đầu từ Trung Quốc. Chất lượng tốt / Hàng sẵn sàng / Giá bán buôn Chất lượng đã được kiểm tra trước khi xuất xưởng Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v  in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output  Voltage error:+/-0.1V  Application Fields: 6-60V storage battery  Size:81*54*24mm/3.19*2.13*0.94inch   Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action,  stop button plays the role of Down -adjust action 1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value  2.Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. 3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.  Package Included: 1 x Battery Charge Control Module

----------------------- ♥♥ -Produkasyong Impormasyon - ♥♥ ------------------ ------- ✔Magpadala upang magpadala ng ✔High kalidad ✔Binungunang presyo ✔Brand bagong 100% ✔ Pinakamahusay na Presyo ng Dami ng Shopee ✔upplier Info ✔invoice Mga sorpresa para sa iyo: ❀ Sundin ang mga shop / "Tulad ng" Item: Priority Shipping & Free Gift ☞PS: Kung nais mo ng isang libreng regalo, mangyaring ipadala sa akin ang screen na sinusundan mo ang aking shop at mag-iwan ng mensahe sa iyong order. # Xiyijiaproduct Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v  in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output  Voltage error:+/-0.1V  Application Fields: 6-60V storage battery  Size:81*54*24mm/3.19*2.13*0.94inch   Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action,  stop button plays the role of Down -adjust action 1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value  2.Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. 3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.  Package Included: 1 x Battery Charge Control Module

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off. The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V Relay Operating Voltage:12.4V Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter Charging Type:12V storage battery Potentiometer Adjustment:RP1, RP2 Size:about 50*32*18mm Potentiometer Adjustment: -RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) -RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board Notes: Transition: 1cm=10mm=0.39inch -Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! -Please allow 1-3cm measuring deviation due to manual measure

Welcome to rriioo We offer the highest discount Follow us and get coupons Our shop has a rich variety of products, affordable prices and good quality Don't miss us, come and buy! ! ! If you have any questions, please contact us Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v  in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output  Voltage error:+/-0.1V  Application Fields: 6-60V storage battery  Size:81*54*24mm/3.19*2.13*0.94inch   Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action,  stop button plays the role of Down -adjust action 1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value  2.Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. 3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.  Package Included: 1 x Battery Charge Control Module

12 V automatic charging power control protection board will automatically charge when the battery voltage drop to about 10.5 V (low voltage adjustable) , and shut off when the power is about 14.4 V (adjustable). Red light on when charging, off when fully charged. Relay disconnect and 220 V input end charging, thereby save energy. Assembled with special voltage control IC and special automobile relay. Small volume and large current. Voltage shutoff accurate and stable. Complete functions and reliable performance.Automatically charge and shut off. Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port. The charger must be full bridge rectified output. The DC output voltage can be between 13.8 and 14.8 V. Charging test for the first time: battery voltage should be about 10 V. Function 1: Current cannot be larger than 10 A. Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong. Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning. Color as shown Material: pc+ metal Package Contents: 1*12V Battery Automatic Charging Controller uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Description: 12 V automatic charging power control protection board will automatically charge when the battery voltage drop to about 10.5 V (low voltage adjustable) , and shut off when the power is about 14.4 V (adjustable). Red light on when charging, off when fully charged. Relay disconnect and 220 V input end charging, thereby save energy. Features: 1, Assembled with special voltage control IC and special automobile relay. 2, Small volume and large current. 3, Voltage shutoff accurate and stable. 4, Complete functions and reliable performance. 5, Automatically charge and shut off. Instruction: Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port. The charger must be full bridge rectified output. The DC output voltage can be between 13.8 and 14.8 V. Charging test for the first time: battery voltage should be about 10 V. Function 1: Current cannot be larger than 10 A. Function 2: The board has reverse connect protection function. There is no output if no battery is connected. No output if the polarity of battery is wrong. Output short circuit automatically shut down: It is a practical protection. As long as the output short circuit, the charger will automatically shut down output, so protect the charger from burning. Adjustment: VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher) VR2 relay connected and began to charge when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher) Specifications: Default Value: Low Voltage: 10.5V Shutoff Voltage: 14.8 V (adjustable, might be different) Wiring Method: Please wire according to instruction. Do not change wiring Size of PCB: 55x33mm/2.17x1.30" Quantity: 1 Pc Note: 1, Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding. 2, Please allow 1-3 mm error due to manual measurement. Thanks for your understanding. 3, Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard Package includes: 1 x Charging Control Boar

----------------------- ♥♥ -Product Information - ♥♥ -------------------------- ✔Ready to send ✔High quality ✔Best price ✔Brand new 100% ✔Lowest Price✔ Shopee Logo ✔upplier Info ✔invoice Surprises for you: ☞PS: If you want a , please send me the screen that you follow my shop and leave a message on your order.#xiyijiaproduct Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output Voltage error:+/-0.1V Application Fields: 6-60V storage battery Size:81*54*24mm/3.19*2.13*0.94inch Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action, stop button plays the role of Down -adjust action -Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value -Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. -Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings. Package Included: 1 x Battery Charge Control M

Features: This product is suitable for 6-60V battery charging control, and can set up the modes of charging voltage and stop charging voltage. Suitable for use in home charger, solar energy, Wind generator. Input charger 6-60v  in the IN end, connect storage battery in OUT end. for example, setting the 12V start ,and 15V stop, when the voltage is less than 12V, The relay closes and send the charging voltage of the charger to the battery, When the voltage is higher than 15V, the relay disconnect and stop charging discharges. Is quite intelligent, helping save electricity, and safe. Automatic power outage, save energy saving energy, prolong battery life. Specifications: Input Voltage: DC 6-60V Display Precision:0.1V Control Precision:0.1V Output Type: direct output  Voltage error:+/-0.1V  Application Fields: 6-60V storage battery  Size:81*54*24mm/3.19*2.13*0.94inch   Using Method: In the setting of the voltage value, the start button plays role of Up-adjust action,  stop button plays the role of Down -adjust action 1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value  2.Set Stop Voltage: in normal display voltage state, press the button will display stopping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stopping charge voltage value. 3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings.  Package Included: 1 x Battery Charge Control Module

Condition:New Type:Voltage Regulator Dissipation Power:normal el Number:XH-M601 Operating Temperature:normal Supply Voltage:13.8V-14.8V Charging type:12V battery Voltage detection:DC voltmeter Power Supply:13.8V-14.8V Relay closing voltage:12.4V Voltage error:±0.1V Relay off voltage:14.8v size:50x32x18mm Material:PCB colour:Photo Color Package Contents: 1 * XH-M601 Circuit BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Bộ Sạc Ắc Quy Tự Động 12V Có Đèn Báo Tình Trạng Sạc Hỗ Trợ Bình Có Dung Lượng Pin 20AH Tích Hợp Mạch Bảo Vệ An Toàn Giới thiệu: Sản phẩm có kích thước nhỏ gọn, màu vàng sáng. Bộ sạc được làm từ nhựa PC cách điện, có bố trí 2 dàn khe tản nhiệt ở 2 bên hỗ trợ làm mát dàn linh kiện bên trong. Bộ sạc dễ dàng sử dụng bạn chỉ cần gắn phần kẹp đen vào chân điện âm, kẹp đỏ vào chân điện dương của bình ắc quy, sau đó bạn cắm điện là bộ sạc sẽ hoàn toàn tự động sạc, không cần thao tác gì thêm. Quá trình sạc diễn ra nhanh và an toàn hơn các bộ sạc phổ thông, với đèn tín hiệu báo sạc tích hợp, bạn dễ dàng theo dõi quá trình sạc. Bộ sạc hỗ trợ sạc cho các dòng ắc quy của xe máy, xe đạp điện, … có điện áp 12V dung lượng dưới 20AH. Thông tin sản phẩm: Mô hình: bộ sạc bình xe máy Model: YX12V2A Chất liệu: nhựa PC, linh kiện điện tử Kích thước sản phẩm: như hình đăng tải Trọng lượng: 250gr Dòng điện đầu vào: 220V 50hz Dòng điện đầu ra: 12 - 14.4V/ 2A Hỗ trợ sạc tối đa cho bình có dung lượng: 20AH Tích hợp mạch bảo vệ ngắn mạch, quá tải Bộ sản phẩm bao gồm: 1x bộ sạc ắc quy 1x hộp đựng Hướng dẫn sử dụng: Trước khi sạc, đảm bảo là bộ sạc và ắc quy trong tình trạng khô ráo Gắn kẹp đen vào tiếp điểm âm, kẹp đỏ vào tiếp điểm dương của bình ắc quy Sau đó cắm điện và bộ sạc sẽ tiến hành sạc tự động. Trong quá trình sạc, đèn hiệu màu đỏ là đang sạc, đèn hiệu màu xanh lá là bình đã sạc đầy Thời lượng sạc bình xe máy phổ thông khoảng hơn 2 giờ đồng hồ *** Lưu ý: không để quên bình trong quá trình sạc, không sạc bình quá 5 giờ. #bosac #sacacquy #acquy #12v #sacxemay #xemay #sacbinh #sacbinh12v #sacacqu

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Description: 100% brand new and high quality! The relay acts as an automatic closing and breaking circuit through the live wire. RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process). The battery detects the high level and the low level through the protection board to perform fully automatic management charging; When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.  The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free. Specifications: Item type: 12V charger power control board Model:XH-M601 Power Supply Voltage:13.8-14.8V  Relay Operating Voltage:12.4V  Relay Disconnect Voltage:14.8V Voltage Tolerance:+/-0.1V Voltage Detection Way:DC voltmeter  Charging Type:12V storage battery  Potentiometer Adjustment:RP1, RP2  Size:about 50*32*18mm Potentiometer Adjustment: 1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) 2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower) Package includes: 1* Power Supply Controller Board  Notes:  Transition: 1cm=10mm=0.39inch  1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!  2. Please allow 1-3cm measuring deviation due to manual measurement. #Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #

Condition:New Type:Voltage Regulator Dissipation Power:normal el Number:XH-M601 Operating Temperature:normal Supply Voltage:13.8V-14.8V Charging type:12V battery Voltage detection:DC voltmeter Power Supply:13.8V-14.8V Relay closing voltage:12.4V Voltage error:±0.1V Relay off voltage:14.8v size:50x32x18mm Material:PCB colour:Photo Color Package Contents: 1 * XH-M601 Circuit BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1