Mạch điều khiển tốc độ quạt

💥Mạch điều khiển tốc độ cho quạt đèn LED 3 kênh, phù hợp để điều khiển quạt tự động để giải nhiệt cho máng đèn LED. 💥 Không bao gồm nguồn 12VDC và quạt! 💥 LH Aquaway 0906380081 để được tư

Features: 100% High quality and Brand new Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35℃ 45℃ ON OFF 40℃ 55℃ OFF ON 50℃ 70℃ ON ON 60℃ 90℃ When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package includes: 1pc x Speed controller 1pc x Temperature probe 1pc x B

Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C

___________________* ❤❤ * ujewndju* ❤❤ * ___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ☀️☀️ Surprises for you ☀️☀️ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ✈Shipping in 1 day Tip: If you want a free gift, please send me the screenshot that you follow my shop ☀️☀️ Attention ☀️☀️ ❀We will be based on your guests in your country to send the corresponding adapter plug. ➷Wholesale retailers are welcome to negotiate long-term business with us! #ujewndju _______________❀Product Information❀______________ Feature: 1. Easy wiring and installation, saving time and effort. 2. Wide working voltage range from 8v to 18V. 3. Lightweight and portable, suitable for most work environments. 4. Low heat capacity, safety and durability, high cost performance. 5. Wonderful replacement for the old or broken one, perfect fitment. Specification: Condition: 100% Brand New Item Type: Speed Controller Material: Semiconductor Model: VHM-802 Working Voltage: DC12V can work within the range of 8-18v Consumption Current: ≤20mA Fan Interface: 2510-4p without 1 bend (special interface for computer 4P fan) Fan Current: Interface can withstand 3A PWM Output: -10%-+100% Operating Temperature: -10℃-+60℃ Size: Approx. 34 x 19 x 13mm / 1.3 x 0.7 x 0.5in Package List: 1 x  Module 1 x Connector Ca

Compatible with 3-pin / 4-pin fans Capable of expanding one motherboard PWM fan header to support up to five fans. Support PWM function, speed control, satisfy your control needs. Since only one RPM signal can be read by one motherboard connector, only the CPU Fan channel of the PWM splitter carries an RPM signal 100% brand new and high quality. Specifications: Item Type: 5-Port Fan Hub/4-Port Fan Hub Connector A: 1 - TX4 4-pin Female Connector B: 1 - TX4 4-pin Male for CPU fan (including Detect tach pin) 4 - TX4 4-pin Male for case fan Voltage: DC 12V colour: black Material: ABS size: 48cm Package Contents: 1 x hub<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: 1. High efficiency, easy to apply in a variety of applications. 2. Support all within 12V 5A fans, synchronous rectifier output. 3. Can be used in parallel multi fans(total current does not exceed 5A). 4. Supports automatic temperature control and manual speed control. 5. Can be opened with a three-wire fan monitoring function (stall warning). Specifications: Color: as shown Voltage: DC 12V Size(approx.): mini size Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: usually 3-5% Stall alarm minimum speed: 700-800 rpm Circuit load capacity: 5A maximum output current and 9A bus current rise Output range: 20%-100% of the first channel, or 40%-100%, 10%-100% of the second channel and the third channel (Note: The above range is only applicable to the PWM range, and the actual control effect will vary depending on the fan). Package Included: 1PC * Speed Controller 1PC* Temperature probe 1PC* Buzzle Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2cm differences due to manual measurement. #Speed #Controller #Fan #Temperature #Control #CPU #Module #High #Temp #Alarm #12V #Accessories #Board #Mini #Parts #Profess

Welcome to baishangfine, I wish you a happy shopping! Features: 100% High quality and Brand new Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35℃ 45℃ ON OFF 40℃ 55℃ OFF ON 50℃ 70℃ ON ON 60℃ 90℃ When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package includes: 1pc x Speed controller 1pc x Temperature probe 1pc x B

Package: 1 piece of PWM fan thermostat The product will be upgraded constantly, the appearance and color may be changed, please don't mind. And take a consideration before place the order if you have request for color or appearance. Parameters: Circuit board size: length 50mm * 43mm * 13mm, Fixed particle hole position: 44mm*37mm, Diameter: 3mm Working voltage: DC12V Circuit load capacity: each output maximum current 5A, total current up to 9A Function setting switch description: TFL (No. 1): The lowest PWM setting of the temperature control channel, the lowest PWM of FAN1 is 40% in the ON state, and the lowest PWM of FAN1 is 20% in the OFF state. TP1 TP2 (No. 2, 3): The temperature control channel controls the temperature zone, the specific settings are as follows (it needs to be used with a temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35℃ 45℃ ON OFF 40℃ 55℃ OFF ON 50℃ 70℃ ON ON 60℃ 90℃ If the temperature is lower than the acceleration temperature, the output will be at the lowest speed, and if the temperature exceeds the full speed, the output will always be at full speed. BF1 BF2 (No. 4, 5): Corresponding to the FAN1 FAN2 stop alarm function switch, when the corresponding is turned on, the channel fan fails and stops, the controller will sound (need to be equipped with a buzzer) and light alarm, and the fan will resume rotation The alarm is automatically eliminated. If both BF1 and BF2 are turned on (ON), any one or both of FAN1 and FAN2 will stop, and the controller will alarm! Parameters: Circuit board size: length, width and height 50mm*43mm*13mm, Positioning hole position: 44mm*37mm, Diameter: 3mm Working voltage: DC12V Circuit load capacity: the maximum output current of each channel is 5A, and the maximum bus current is 9A Output range: the first channel 20%-100% or 40%-100% (TFL=ON) The second and third channels 10%-100% Note: The above range is only the PWM range, the actual fan control effect will vary according to different fans. Temperature probe parameters: 50K B=3950 Temperature control temperature zone error: according to the temperature probe error, generally 3-5% Minimum speed for stall alarm: 700-80

The Motor Speed Controller allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%. The motor speed controller can easily provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes the function of digital display whose digital tube display the duty ratio Scope of application: all kinds of electrical appliances requiring speed regulation Model: ZFX-1865 Body size: 72*39*24mm (screen 80*42mm) Power: adjustable Rated current: 6A Maximum current: 10A Power input: DC 6V-30V Speed adjustment range: 0%---100% Chassis plate: plastic PWM frequency:

___________________❤❤Bacony❤❤___________________ Welcome to our store, our main business is 3C, auto parts and other products. We always insist on selling the best quality products at the lowest price. ✔ spot ✔ wholesale price ✔ high quality ★★★Continuous surprises★★★ ☞☞ Passbook coupon: more favorable coupon orders ☞☞Follow the store: free gift ☞☞ "like" products: priority delivery (If you want to get a free gift, please send us a screenshot of the store and make a note on the order, otherwise it will not be sent) ★★Please note ★★ ✌ We will send the appropriate plug adapter according to your country. _______________❀Product Information❀______________ Features: 1. Computer fan PWM hub-1 divided into 10 interfaces, solving the problem that motherboard fan interface is not enough! 2. The PWM interface is connected to the motherboard CPU fan interface, and the red interface is dedicated to CPU fan. The black interface is PWM conventional fan interface. 3. High quality materials and smooth operation, direct connection to large 4PIN power supply line. Double-sided tape is available for installation on the back. 4. Firm wire connection and clean casing. Be careful to avoid bending pins and capacitors when installing hubs. 5. Since the main board/fan controller board can only receive one speed signal, the other nine traditional fan interfaces have PWM function but no speed signal. Specification: Material: PCB Interface: 1 divided into 10 interfaces The PWM interface is connected to the motherboard CPU fan interface. The red interface is dedicated to CPU fan. The black interface is PWM conventional fan interface. Package List: 1 x

🔸CAM KẾT TỪ 𝕂𝕀ℕ𝔾_𝔼𝕄𝕆_𝕄𝔸ℝ𝕋 : ✅GIAO HÀNG TẬN NHÀ. ✅CAM KẾT HÀNG CHÍNH HÃNG - LỖI 1 ĐỔI 1 (FREESHIP ĐỔI TRẢ TOÀN QUỐC) ✅ĐƯỢC HỖ TRỢ ĐỔI HÀNG TRONG VÒNG 15 NGÀY ✅UY TÍN VÀ THƯƠNG HIỆU ĐÃ ĐƯỢC KHẲNG ĐỊNH QUA HÀNG TRIỆU ĐƠN TRÊN CẢ NƯỚC ✅BẢO HÀNH VÀ TV ĐẶT HÀNG: 𝟎𝟗𝟒.𝟒𝟓𝟕𝟔.𝟏𝟏𝟏 - 𝟎𝟖𝟔.𝟐𝟑𝟓.𝟏𝟏𝟑𝟔 (Zalo) 𝕎𝕖𝕓 : 𝕐𝕖𝕦𝕋𝕙𝕚𝕔𝕙𝕊𝕒𝕟𝕘𝕋𝕒𝕠.ℂ𝕠𝕞 ========= ✅Mạch điều khiển quạt từ xa TOMAX V1 giúp bạn biến chiếc quạt thông thường thành quạt điều khiển từ xa cao cấp đơn giản hơn bao giờ hết! ✅Sản phẩm dành cho các bác có sở thích tự sửa chữa, thay thế bộ điều khiển của các loại quạt điều khiển từ xa bị hỏng, hoặc chế vào các loại quạt thông thường thành quạt điều khiển từ xa. ✅Các chức năng chính : 🔸Tắt bật quạt 🔸Điều khiển 3 tốc độ 🔸Chức năng gió trời (mạnh dần và yếu dần) 🔸Điều khiển túp năng hoặc đèn 🔸Hẹn giờ 1-2-4 giờ 🔸Điều khiển sử dụng 2 pin AAA ✅Ưu điểm: - Mắt hồng ngoại tách rời, có thể kéo dài ra bên ngoài giúp việc điều khiển dễ hơn - Điều khiển sử dụng pin đũa AAA cho thời gian điều khiển lâu hơn, dễ dàng thay thế khi hết pin - Tầm điều khiển rộng, độ nhạy cao và ổn định #mach_dieu_khien_quat_tu_xa #mach_quat #quạt #quat_dieu_khien_tu_xa #dieu_khien_quat #quat_dieu_khien #quat_treo_tuong #quat_cay #quat_mini #quat_dien_tu #quat_co_dieu_khien #điều_khiển_quạt_từ_xa #mạch_điều_khiển_quạt_từ_xa #điều_khiển_

ღღThank you for coming! Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C

Welcome to our store desertwatersuper.vn!Wish you have a good shopping. Features: 100% High quality and Brand new Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35℃ 45℃ ON OFF 40℃ 55℃ OFF ON 50℃ 70℃ ON ON 60℃ 90℃ When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package includes: 1pc x Speed controller 1pc x Temperature probe 1pc x B

🔸CAM KẾT TỪ 𝕂𝕀ℕ𝔾_𝔼𝕄𝕆_𝕄𝔸ℝ𝕋 : ✅GIAO HÀNG TẬN NHÀ. ✅CAM KẾT HÀNG CHÍNH HÃNG - LỖI 1 ĐỔI 1 (FREESHIP ĐỔI TRẢ TOÀN QUỐC) ✅ĐƯỢC HỖ TRỢ ĐỔI HÀNG TRONG VÒNG 15 NGÀY ✅UY TÍN VÀ THƯƠNG HIỆU ĐÃ ĐƯỢC KHẲNG ĐỊNH QUA HÀNG TRIỆU ĐƠN TRÊN CẢ NƯỚC ✅BẢO HÀNH VÀ TV ĐẶT HÀNG: 𝟎𝟗𝟒.𝟒𝟓𝟕𝟔.𝟏𝟏𝟏 - 𝟎𝟖𝟔.𝟐𝟑𝟓.𝟏𝟏𝟑𝟔 (Zalo) 𝕎𝕖𝕓 : 𝕐𝕖𝕦𝕋𝕙𝕚𝕔𝕙𝕊𝕒𝕟𝕘𝕋𝕒𝕠.ℂ𝕠𝕞 ========= ✅Mạch điều khiển quạt từ xa TOMAX phiên bản v2 được nâng cấp so với thế hệ cũ với bộ điều khiển bằng tay được thiết kế ra bên ngoài qua dây cáp kết nối, giờ đây bạn vừa có thể điều khiển bằng điều khiển từ xa vừa có thể bật tắt bằng tay tại chỗ! ✅Với mạch điều khiển quạt từ TOMAX bạn có thể thay thế cho các loại mạch của quạt điều khiển từ xa đã bị hỏng, hoặc lắp thêm đối với những quạt thường để biến chiếc quạt thông thường thành quạt điều khiển từ xa cao cấp. ✅Một số chức năng chính của mạch điều khiển quạt từ xa TOMAX v2 🔸Bật, tắt quạt bằng remote hoặc bật tắt tại chỗ 🔸Điều khiển 3 tốc độ gió 🔸Điều khiển túp năng hoặc đèn 🔸Hẹn giờ từ 1,2,4,6 giờ ✅Một số cải tiến của mạch điều khiển quạt TOMAX v2 so với phiên bản v1 🔸Mạch được tích hợp nút bấm tay điều khiển quạt ra bên ngoài 🔸Đèn báo tốc độ, thời gian hẹn giờ thể hiện rõ ràng và dễ theo dõi 🔸Mắt hồng ngoại và điều khiển sử dụng công nghệ mới cho khả năng nhận tín hiệu tốt hơn, phạm vi điều khiển xa hơn. ✅Thông tin chi tiết sản phẩm: 🔸Bộ điều gồm Mạch điều khiển, hộp điều khiển gắn ngoài và điều khiển( remote ) 🔸Điện áp hoạt động: 220V 🔸Remote có các chế độ - Bật/ Tắt - Điều khiển tốc độ gió cao - Điều khiển tốc độ gió trung bình - Điều khiển tốc độ gió thấp - Sử dụng pin: Pin cúc Lithium CR2025 #mach_dieu_khien_quat_tu_xa #mach_quat #quạt #quat_dieu_khien_tu_xa #dieu_khien_quat #quat_dieu_khien #quat_treo_tuong #quat_cay #quat_mini #quat_dien_tu #quat_co_dieu_khien #mạch_điều_khiển_quạt_từ_xa_

Mạch hạ điều khiển tốc độ quạt 12V LM317 sử dụng IC LM317 có chức năng hạ điện áp từ 15V xuống tối thiểu 1.25V, mạch thường sử dụng để điều khiển tốc độ quạt với dòng tải tối đa 1.5A, ngoài ra mạch có thể được ứng dụng làm mạch nguồn đa năng với dải điện áp điều chỉnh liên tục từ 1.25 - 13VDC. Thông số kỹ thuật: Điện áp ngõ vào: 3.25 - 15VDC Điện áp ngõ ra: 1.25 - 13VDC Điều chỉnh ngõ ra bằng chiết áp tích hợp trên mạch Dòng tải: 5 - 1500mA Kích thước: 33 x 30 x

Compatible with 3-pin / 4-pin fans Capable of expanding one motherboard PWM fan header to support up to five fans. Support PWM function, speed control, satisfy your control needs. Since only one RPM signal can be read by one motherboard connector, only the CPU Fan channel of the PWM splitter carries an RPM signal 100% brand new and high quality. Specifications: Item Type: 5-Port Fan Hub/4-Port Fan Hub Connector A: 1 - TX4 4-pin Female Connector B: 1 - TX4 4-pin Male for CPU fan (including Detect tach pin) 4 - TX4 4-pin Male for case fan Voltage: DC 12V colour: black Material: ABS size: 48cm Package Contents: 1 x hub<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Sorry for the inconvenience, i am sorry for you donot receive goods. i have shiped goods , but recently all world now has epidemic , most company move slowly , can you wait a week , if you still not receive , i can resend or full refund . if you donot want wait , i can refund now . sorry

Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C

Welcome to Rotatingmoment Follower Us To Get Special Vouchers. Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C

Sorry for the inconvenience, i am sorry for you donot receive goods. i have shiped goods , but recently all world now has epidemic , most company move slowly , can you wait a week , if you still not receive , i can resend or full refund . if you donot want wait , i can refund now . sorry

Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: -Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. -The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). -The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. -Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: -Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! -This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection

PARAMETER Package Size(WXHXD): 102mmx38mmxl7mm Speeder Size (WXHXD): 48mmx20mmx8mm SATA Power Plug: 12V Control Model: PWM/DC Fan Port 1x4/3Pin White Port 0-100%PWM/3.8-12V DC 4x4Pin Black Port 0-1009PM 3x3Pin Black Port 3.8-12V DC Manual Control Speed: 40%/70%/100% Connector Max Output: 1A Total Output: 4A Max Power

Welcome to our shop, we provide high-quality and inexpensive Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: -Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. -The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). -The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. -Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: -Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! -This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection

#DIY #Kits #6-9V #Wind #Turbine #Micro #Motor/ #Mini #Blue #Leaf #Paddle/ #Diodes/ #Cables #Vibration #Electric DIY Kits 6-9V Wind Turbine Micro Motor/ Mini Blue Leaf Paddle/ Diodes/ Cables Vibration Electric Stepper DC Motor Scooter Robot Bicycle Speed Controller Switch Brush Electronic Voltage Regulator Fan Adjustable Driver Board Module Governor power generator 100% brand new and high quality Material: Electrical components Color: See pictures Leaf Paddle Dia.: 60mm Motor Dia.: 25mm Motor Length: 31mm Shaft Dia.r: 2mm Power Voltage: 0-20V Voltage: 6-9V Speed: 200~6000rpm Features: 12V Micro wind turbines. The motor can be done ordinary power motor, you can also plug blades in wind driven generator motor do. No retail package Quantity: 1Pc Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank y

Welcome to our store to find whatever you need,we will always be here for you! Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C

Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: -Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. -The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). -The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. -Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: -Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! -This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection

Dear, welcome to Yotome. For more information about the product, please read on~ Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C

Hello,everyone,this is roadgoldnew store,welcome! Feature: Made of high-quality material, durable, firm and stable for us to use. To replace the old, broken or damaged one with this new one. This cooling fan hub is equipped with the independent speed controller for you to adjust. Professional high speed regulating circuit, high performance, support for SATA/4Pin interface. Cooling Fan Speed Controller only, other accessories demo in the picture is not included! Specifications: Item Type: Cooling Fan Speed Controller Material: Plastic+Metal Size: Standard Size Color: Black Supply Voltage: 12V Interface: SATA/4Pin Optional Type: SATA, 4 Pin Quantity: 1 Pc Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x Cooling Fan Speed Contr

Motherboard 1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension 12V Power Supply Socket PC Speed Controller Adapter Feature: 1. Expand the 10-pin fan 4-pin interface to solve the lack of motherboard interface and centralize the processing of fan wires. 2. The PWM interface is connected to the CPU fan interface of the motherboard, and the red is the dedicated interface for the CPU fan (with speed measurement function). The black interface is a PWM conventional fan interface (no speed measurement signal, but does not affect the PWM function). 3. The power supply can be directly powered by the power supply, which can reduce the load pressure on the motherboard. The temperature control line PWM is separately connected from the motherboard, and the power supply and temperature control are correct. 4. Scope of application: suitable for 12V motherboard 3pin / 4pin fan, 3pin fan can also be used, but plug in to run at full speed, because 3pin fan has no PWM speed regulation 5: The back of the hub PCB board has 3M adhesive, which is convenient for sticking in a flat place. Also comes with a fixed reel hole (product comes with a 40cm long PWM temperature control cable) Specifications: Type: Large 4D port power supply, SATA power supply (optional) Line Interface: Small 4Pin PWM Size: 70x45x15mm/2.76*1.77*0.59in Notes: 1. Avoid speed measurement confusion, the computer freezes, and the multi-channel interface extended by one interface only shows the speed measurement of one of the fans! 2. This product is a PWM speed regulator. Its function is to expand a single motherboard's four-pin port into multiple ports for unified speed adjustment. If your fan is a 3-pin fan, you can also plug it in, but you cannot achieve PWM control speed! Included: 1 X HUB Splitter 1 X 4 Pin Connection C