Li-ion battery charger

Dear, welcome to Deceble, where you can find the latest season's products. We also provide 24H online Q&A. For product details, please read on~ Ebike Li-ion LiPo Plastic Shell DC Head 26V/48V 2A Lithium Battery Charger for Electric Bicycle Black Features: 1. Adopting the latest international intelligent three-stage charging technology, combined with the use of electric bicycles in recent years. 2. Automatically control charging, fast charging, sufficient power, but no charge, no under charge, no water loss, and extended battery life. 3. All imported chips are used for scientific production under strict quality control. Discriptions: The charger is based on the modern high-frequency switching power supply structure, built-in microcomputer control, to achieve fast, balanced, turbulent, floating charge automatic control charging, charging speed, accurate and reliable. Instructions: 1. Connect the charger output cable to the electric vehicle charging port to ensure reliable connection. 2. Connect the charger to 220V, the charger starts working, and the charging indicator is red. 3. When the charging indicator turns green, the charging is complete, you can turn off the power and unplug the plug. 4. When the indicator light is orange, it indicates that the charger is not in good contact with the battery. Reconnect the charger to the battery after disconnecting the AC power. Specifications: Model: 36V/2A DC head, 48V/2A DC head Material: lithium battery + plastic case Colour: Black Size: 150mm*70mm*40mm/5.91*2.75*1.57'' Net weight: 303g Gross weight: 351g Warning Tips: 1. Lithium-ion battery chargers should be charged under the supervision of an adult when charging a lithium battery. 2. If you find that the defective lithium battery is hot and swollen, please turn off the power immediately to stop charging. Note: Please allow 1-3cm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Included: 1 x Ebike Lithium Battery Ch

Linhkien.Nhật Tảo chuyên cung cấp linh kiện điện tử và các Kit, Module, Thiết bị điện tử, chất lượng [Minh Hà] LTC4054 SOT23-5 Charger Battery Li-iOn 4.2V 800mA (LTH7) Tính năng Thông số kỹ thuật ******* BANLINHKIEN.VN - LINH KIỆN ĐIỆN TỬ MINH HÀ Điện thoại: 0972.84.11.66 hoặc Tổng đài: 1900.0344 Zalo: 0972.84.11.66 Website: Banlinhkien.vn hoặc Banlinhkien.com #Banlinhkien #linhkien #Module #Kitphattrien --------------------------------------------------------------------------- Online: 038.86.87.129 Địa Chỉ : 71 Ngô Quyền.P7,Q10.HCM Cam kết hoàn tiền 100% khi sản phẩm sai quảng cáo,hoặc lỗi do nhà sản xuất. Cam kết sản phẩm giốn

3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 41 * 55 * 3.4mm (Enhanced Version) Charging voltage: 12.6V - 13.6V Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current ) Continuous charge current (upper limit): 20A Color: green Material: PC + metal Enhanced version:Suitable for electric drill with starting current below 80A and power below 130W .(without balanced function) Note 1: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 battery can not start the drill!!). Note 2: When you wiring 0V, 4.2V, 8.4V, 12.6V, please do it strictly according to the wiring diagram.Do not deliberately make it short circuit. Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected. Note 4: Do not use a mix of good battery and poor battery,please make sure each battery is the same in capacity and internal resistance. For some of the poor basis of electronic customers to explain: balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better! (2 good battery +1 Poor battery use effect = 3 poor battery use effect). Package Include: 1* Enhanced version PCBOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

(V06) 4 Slots Universary Battery Charger 18650 Li-ion Battery Charger with LED Indicator. Description: This four slots battery charger supports charge 4*18650 batteries simultaneously. Built-in over-current, over-charge and short circiut protections offer safe charging. Features: The charger can simultaneously charge 4*18650 batteries. Compact and portable, replenish energy for your devices anytime. Over-current, over-charge and short circiut protections ensure safe charging. LED indicator displays charging state. EU plug and US plug are available for you to choose. Specifications: Product Name: 18650 Battery Charger Input Voltage: AC 110V-240V Input Frequency: 47-63Hz Charging Voltage: DC 4.2V Charging Current: DC 1200mA Color: Black Plug: EU / US (Optional) Item Size: 10.6 * 9.1 * 2.9cm / 4.17 * 3.58 * 1.14in Item Weight: 110g / 3.86oz Package Size: 13.5 * 10.5 * 3.2cm / 5.31 * 4.13 * 1.26in Package Weight: 119g / 4.18oz Packing List: 1 * Battery Ch

Welcome to interfun store, have a good shopping! Feature: 100% new brand and high quality Increased anti-interference function, Reduce the large current heat by 30%, Starting power increased from 135W to 220W (4S40A) 4S 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Description: Charging voltage:12.6V - 13.6V Continuous charge current (upper limit): 20A Continuous discharge current (upper limit): 40A Board Size: As picture shown Scope: Nominal voltage of 3.6V, 3.7V Package Included:1 x 4S 4A Balance Version Protection Board Note: Transition: 1cm=10mm=0.39inch Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! \ (@^0^@) /Welcome to the worry-free grocery store! \ (@^0^@) / This is a worry-solving shop where you can find your happiness. ❃Satisfactory price and superior quality ❃Express delivery (delivery within 24 hours, arrival within 5-15 days) ❃Products updated in time Best smile service (if you have any questions, please contact us immediately) ☞Follow us to find more. You can get many unexpected surprises here. Have a nice shop

#5S #15A #Li-ion #Lithium #Battery #18650 #Charger #PCB #BMS #18.5V #Cell #Protection #Board 5S 15A Li-ion Lithium Battery 18650 Charger PCB BMS 18.5V Cell Protection Board Specifications: Brand new This board is 5 string 3.7V/4.2V lithium battery protection board High current protection board, continuous 15A current Protection board with overcharge protection, over-discharge protection, over-current protection, short circuit protection. P+ P- is the abbreviation of PACK+ PACK-, that is, the output of positive and negative poles B+ B-is the abbreviation of battery, which is the positive and negative pole of the battery. PCB board size: (approx.)8.8x1.6cm/3.46x0.63" Detailed Parameters: Discharge: Continuous discharge current: 15A(max) Instantaneous discharge current: 25A Charge: Charge voltage: 21V Charging current: 15A(max) Overcharge Protect: Over-charge detect: 4.28±0.05V Protect delay: 0.5s Over-charge release: 4.28±0.05V Over-discharge Protect: Over-discharge detect: 2.55±0.08V Over-discharge detect delay: 0.1s Release voltage: 2.9±0.1V Short-circuit Protect: Protect condition: Cut load Detect delay: 250uS Release condition: Cut load Over-current Protect: Detect voltage: 150mV Detect delay: 9MS Current detect: 30±3A Release condition: Cut load Inner Resistance: ≤20mΩ Self-consumption: Working current: ≤30uA Sleep current: (when over-charge)≤10uA Working Temperature Range: -30-+80℃ Quantity: 1 Pc Note: Please allow 0-1mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Contents: 1 x Li-ion Lithium Battery Protection

Features: *USB Charging Adapter for Makita ADP05 BL1815 BL1830 BL1840 BL1850 *Suitable for 14.4~18V battery *Can charge for 2 USB compatible electronic devices *Built in protection board, overcharge protection, over current protection, high voltage protection, to ensure the stability of the charging current *Durable and reliable to use *Lightweight & portable, easy to carry *100% brand new and high quality Specifications: *Material: ABS+ Fireproof Material *Color: Black Or Blue *Input Voltage: 14.4V and 18V *Input Current: 2A *USB Output: 5V 2.1A *Quantity: 1pc Fits for: For Makita 14.4V power tool battery models: 194065-3, 194066-1, 194558-0, 194559-8, 195443-0, BL1415, BL1430, JT6226, LGG1230, LGG1430, MAK1430Li, MET1821 For Makita 18V power tool battery models: 194204-5, 194205-3, 194230-4, 194309-1, BL1815, BL1830, BL1835, BL1840, BL1850, LXT400 Package Content: 1*USB Charging Ad

(V06) 2 Slots 18650 Li-ion Battery Charger 18650 Charging Dock Stand with LED Indicator. Description: This 2 slots battery charger supports charge 2*18650 batteries simultaneously. Built-in over-current, over-charge and short circuit protection offer safe charging. Features: Equipped with UK plug power cable. The charger can simultaneously charge 2*18650 batteries. Compact and portable, replenish energy for your devices anytime. Over-current, over-charge and short circuit protection ensure safe charging. LED indicator displays charging state (red: charging; green: charging completed). Specifications: Product Name: 18650 Battery Charger Input Voltage: AC 100V-240V Input Frequency: 50-60Hz Charging Voltage: DC 4.2V Charging Current: DC 1000mA Plug: UK Color: Black Item Size: 10.2*5.0*3.0cm/4.01*1.96*1.18in Item Weight: 96g/3.38oz Package Size: approx. 14.0*8.5*6.0cm/5.51*3.34*2.36in Package Weight: approx. 101g/3.56oz Packing List: 1 * Battery Ch

Welcome to onlylove Features: LP-E6 LED Display Battery Pack with charging indicator display.  2-Slot Li-ion Battery charger for 7.2V-7.4V li-ion battery only. Input: 5V 2A 10W, and Output: 8.4V 0.6A 5W. For Canon EOS 6D, 7D, 70D, 60D, 5D Mark III, Mark II Digital SLR Camera. Includes a USB charging cable to laptop, AC adapter, car charger and power bank use.   Specifications: Brand: Andoer Charger Mode: LP-E6 Input: 5V 2A 10W Output: 8.4V 0.6A 5W Item size: Approx. 8.5 * 5 * 2cm / 3.3 * 1.9 * 0.7in Item weight: 56g / 2oz Package size:  Approx. 11.5 * 10 * 3cm / 4.5 * 3.9 * 1.2in Package weight: 75g / 2.6oz Package List: 1 * Battery Charger 1 * USB Cable 1 * User Manual(English & Chinese) #BatteryPack #liionbatterycharger #accessoriespart #cameracharger #adapterscharger #rechargeableleddisplay #CameraAccessories #canoneoscharger #2slotusbcable #BatteryCh

Welcome to onlylove Features: EN-EL14 LED Display Battery Pack with charging indicator display.  2-Slot Li-ion Battery charger for 7.2V-7.4V li-ion battery only. Input: 5V 2A 10W, and Output: 8.4V 0.6A 5W. For Nikon D3100, D3200, D3300, D5100, D5200, D5300, D5500, DF, Coolpix P7000, P7100, P7700, P7800 DSLR Camera. Includes a USB charging cable to laptop, AC adapter, car charger and power bank use.   Specifications: Brand: Andoer Charger Mode: EN-EL14 Input: 5V 2A 10W Output: 8.4V 0.6A 5W Item size: Approx. 8.5 * 5 * 2cm / 3.3 * 1.9 * 0.7in Item weight: 56g / 2oz Package size:  Approx. 11.5 * 10 * 3cm / 4.5 * 3.9 * 1.2in Package weight: 75g / 2.6oz Package List: 1 * Battery Charger 1 * USB Cable 1 * User Manual(English & Chinese) #ford5300d5500df #liionbatterycharger #batterychargerpack #Battery #outdoorssport #black #enel14a #Rechargeable #BatteryCharger

#3S #11.1V #12.6V #10A #Li-ion #Lithium #Battery #18650 #Charger #PCB #BMS #Protection #Board 3S 11.1V 12.6V 10A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board Charging voltage:12.6V-13V Overcharge voltage range:4.25V±0.05V Over discharge voltage range:2.5V±0.05V Upper limit working current:6A Upper limit instantaneous current:12A Working temperature:-40-+50℃ Storage conditions:-40-+80℃ Static electricity:less than 30 ua Useful life:more than 30000 hours Resistance:less than 100 m Ω Short circuit protection,can protect,delay the recovery Size:5.3x1.2cm/2.09x0.47inch Note: Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid. Due to the difference between different monitors,the picture may not reflect the actual color of the item.Thank you! Package Includes: 1x Protection

4 slots are independently charged and do not interfere with each other. The two-color charging indicator lights up red when charging, and is fully lit green. The charge cut-off voltage is 4.23V, and it will automatically stop when fully charged, and will not overcharge. Item Name: Battery Charger Material: ABS Suitable Batteries: 10440, 14500, 16340, 16650, 14650, 18350, 18500, 18650 (Not Included) Input Voltage: DC 5V 1-2A (USB Power Supply) Output Voltage: DC 4.2V 1000mA Size: 12.2cm x 9cm x 3cm/4.80" x 3.54" x 1.18" (Approx.) Notes: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x Battery Charger(Not Included Batte

(V06) YONII Q4 3.7V 18650 Battery Charger Li-ion USB 4 Slots Independent Charging Portable 18350 16340 14500 Battery Charger. Features: The retractable battery compartment design, Compatible with 21700/26650/18650/16340/AA/AAA/C/SC/A/F6. Independent charge management, automatic identification of nickel-metal hydride batteries and lithium batteries and non-rechargeable batteries, no damage to dry batteries. Reverse connection protection, showing the charging progress, automatic stop when fully charged and display 100%. Compatible with a wide range of 3.6V/3.7V lithium batteries: 10440/14500/14650/16340/17335/17500/17670/18350/18500/18650/18700/20700/21700/22650/25500/26650; Ni-Cd Ni-MH batteries: AAAA AAA/ AA/A/SC/C. Fashion convenient and quick, easy to carry. USB Port Batteries Charger, user-friendly, you can connect it to laptop, computer, power bank and most adapters with USB interface. Specification: Brand Name: YONII Q4 Type: Battery Charger  Color: Black Input: DC 5V 2A Output:  4.2V=4x 0.5A  4.2V=2x1.0A  4.2V= 1x2.0A 1.45V=1x0.5A  Package Size: 15 * 11 * 4cm / 5.9 * 4.3 * 1.6in Weight: 240g / 8.5oz Package List: 1 * Battery Charger  1 * USB C

#25A #12V #3S #Polymer #Li-ion #Lithium #18650 #Battery #Charger #PCB #Protection #Board 25A 12V 3S Polymer Li-ion Lithium 18650 Battery Charger PCB Protection Board Notice: 1.First detect cell voltage is basically stable,then serial connection 2.When soldering protection board,thetouch time between soldering iron and protection board should not be too long,within 1.5s is the best Specifications: Model:3 serial 12V 25A protection board Continuous Operating Current:<25A Instant Operating Current:<40A Charging Voltage:12.8-16V Charging Current:<25A Overcharging Protection Voltage:single cell 4.2V+/-0.025V Overdischarging Protection Voltage:single cell 2.9V+/-0.1V Short Circuit Protection:yes Appliation Fits:3.7V cell 3 serial/18650 multiple parallel 3 serial Load Power:<DC 12V 300W Size: 5x4cm/1.96x1.57inch Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 Pc x PCB Protection

Welcome to interfun store, have a good shopping! Specification: Brand new Size: approx.41*16*3.5mm Over voltage range: 4.25-4.35v±0.05v Over discharge voltage range: 2.5-3.0v±0.05v Limited current: 15A Upper working current: 8A Quiescent current: less than 10uA Operating temperature: -40 - +50℃ Storage conditions: -40 - +80℃ Resistance: less than 300m ohm Short circuit protection: protection, charge recovery Useful life: more than 50000 hours Main function: over charging protection, over discharge protection,short circuit protection,over current protection function. Usage: 2 string 7.4V lithium Lipo Li-ion 18650 battery phosphate rechargeable battery pack. Stable performance. Fine workmanship and durable. Packing included: 1pc x protection board \ (@^0^@) /Welcome to the worry-free grocery store! \ (@^0^@) / This is a worry-solving shop where you can find your happiness. ❃Satisfactory price and superior quality ❃Express delivery (delivery within 24 hours, arrival within 5-15 days) ❃Products updated in time Best smile service (if you have any questions, please contact us immediately) ☞Follow us to find more. You can get many unexpected surprises here. Have a nice shop

#3S #40A #Li-ion #Lithium #Battery #Charger #Lipo #Cell #Module #PCB #BMS #Protection #Board #For #Drill 3S 40A Li-ion Lithium Battery Charger Lipo Cell Module PCB BMS Protection Board For Drill Motor 12.6V with Balance 3S 11.1V 12.6V 40A lithium battery BMS Protection Board For Drill Motor 12.6V with Balance Enhanced version:Suitable for electric drill with starting current below 80A and power below 130W .(without balanced function) Balanced version: Suitable for electric drill with starting current below 80A and power below 170W .(with balanced charging function) 3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.7V, lithium battery full of voltage 4.2V , including 18650,26650, polymer lithium battery Product Size:41*55*3.4mm (Enhance version), 41 * 60 * 3.4mm (balanced version) Product weight:8.8g (Enhance version), 9.8g (balanced version) Charging voltage: 12.6V - 13.6V Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 20A Suitable for starting current below 80A, power 170W below the drill，Balanced version with balanced charging. Note 1, The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery 2, Strictly according to map wiring, do not deliberately short circuit. 3, Single battery exceeds 4.2V, the "430" resistor will heat up and discharge (discharge to 4.19V to stop heating). If the "430" resistor is severely hot, check if the wrong line is conne

#2S #20A #7.4V #8.4V #Li-ion #Lithium #Battery #18650 #Charger #PCB #BMS #Protection #Board 2S 20A 7.4V 8.4V Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board Applicable scope:Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650,26650,polymer lithium batteries,without limitation on the dimensions) Charging voltage:8.4V - 9.0V Continuous discharge current (upper limit):20A (If the cooling environment is not good,reduce the load current use) Continuous charge current (upper limit):10A Standard Edition:Suitable for starting drills with currents up to 25A below 50W,or resistive loads below 168W. Balanced version:Suitable for starting currents below 25A and below 50W power drills,or resistive loads below 168W,with balanced charging function. Size:4.5x1.5cm/1.77x0.59inch 4.8*2cm/1.89x0.79inch Note: Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid. Due to the difference between different monitors,the picture may not reflect the actual color of the item.Thank you! Package Includes: 1x Lithium Battery 18650 Charger PCB BMS Protection

Type:Voltage Regulator Operating Temperature:standard Supply Voltage:18V 21V Application:Computer el Number:5S 15A Li-ion Lithium Battery BMS 18650 Color:green + black Material:PC + metal Package Contents: 1 x Protection board 1 x WireOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#AL1115CV #Charging #Current #Li-ion #Lithium #Battery #Charger #Temperature #Protection #for #Alternative #Bosch #Power #Tool #USB AL1115CV Charging Current Li-ion Lithium Battery Charger Temperature Protection for Alternative Bosch Power Tool USB Port Description: 100% brand new and high quality Features: The compact battery can be fully charged in 1 hour or less, minimizing downtime. The charger communicates directly with the battery pack to monitor the voltage, temperature and status of the individual battery. Charger uses a FIFO charging sequence to charge the battery. Compatible with Bosch Drill 10.8V 12V AL1115CV TSR1080 GSR10.8-2 GSA10.8V GWI10.8V TSR120 BAT411 BAT412A Specification: Type: Rapid Data Cable Material: ABS Applications: for Bosch Drill 10.8V 12V AL1115CV TSR1080 GSR10.8-2 GSA10.8V GWI10.8V TSR120 BAT411 BAT412A Features: Battery charger, fast charging, USB, temperature protection, short circuit protection, built-in cooling fin, tool Dimension: app.15.5x16.6x6.5cm/6.1x6.54x2.56in Specification: US, EU (optional) Color: Black Quantity: 1 Pc Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 Pc x Rapid Data

Welcome to interfun store, have a good shopping! Specification: Brand new Name: protection board Size: approx. 60*23mm Color: as picture shows Charging voltage: 21 V Charge MOS pressure value: 35 V Discharge MOS pressure value: 35 V Charging current: 56 A Continuous discharge current: 15 A Over current protection: 50/55/60 A Over current protection delay: 20/25/30mS Single section since the power consumption: 30uA Single section between the power consumption: 3uA Single section over charge detection voltage: 4.18- /4.22V Over charge recovery voltage 4.05- 4.15 V Over charge detection delay: 0.5/1.0/2.0S Single section over discharge detection voltage: 2.75-2.85 V Over discharge recovery voltage: 2.90-3.20 V Over discharge detection delay: 0.5-2.0S Short / over / over current protection recovery short circuit / over discharge / over current protection after removal of load auto recovery Short circuit protection delay 200/500/600uS The normal working state of B- to P- resistance: 5mΩ Continuous 15A current maximum temperature rise: 25 ℃ Working environment (humidity) relative humidity: ≥98% (long-term stability under the humidity) Working environment (temperature) -30 ~ 80℃(in the lower temperature range of long-term stability) Note: Please allow 1-5mm errors due to manual measurement Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same Package included: 1 x Protection board 1 x Wire \ (@^0^@) /Welcome to the worry-free grocery store! \ (@^0^@) / This is a worry-solving shop where you can find your happiness. ❃Satisfactory price and superior quality ❃Express delivery (delivery within 24 hours, arrival within 5-15 days) ❃Products updated in time Best smile service (if you have any questions, please contact us immediately) ☞Follow us to find more. You can get many unexpected surprises here. Have a nice shop

Dear, welcome to Deceble, where you can find the latest season's products. We also provide 24H online Q&A. For product details, please read on~ Feature: - Short-circuit protection with built-in fuses to prevent danger from short-circuiting of electrical appliances and ensure safe use. - When the charger is empty, it will light green. When the load is red, it will be green when charing over, ensure that the battery is fully charged without overcharging and safe use. Specifications: Input: AC: 100~240V 50/60Hz No-load voltage: DC4.2V Load current: 300mA, ±20mA Battery filling rate: ≥94% Packing size: 60*40*10mm/2.36*1.57*0.39in Weight: 22g Factory inspection environmental conditions 1. Using environment: temperature: 0-35°C humidity: ≤ 95% 2. Storage environment: temperature: -25 ~ +60 ° C humidity: ≤ 85% 3. The body temperature rise during work: when the charger working, the surface temperature rise of the charging case ≤ 25°C, the surface temperature rise of the battery ≤ 30°C. Notes: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Included: 1 X Ch

#Balance #4S #40A #Li-ion #Lithium #Battery #18650 #Charger #PCB #BMS #Protection #Board #Balanced #Charge #For Balance 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board Balanced Charge For Drill Motor 14.8V 16.8V Lipo Cell Module 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with Balance For Drill Motor 14.8V 16.8V Lipo Cell Module 4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 46 * 60 * 3.4mm (balanced version) Product weight: 10.3g (balanced version) Charging voltage: 16.8V - 18.1V Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 20A Equalization version: suitable for starting current below 80A, power 135W below the drill. Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!). Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit. Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube. Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery. Package included: 1 * 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with ba

#2S #5A #Li-ion #Lithium #Battery #7.4v #8.4V #18650 #Charger #Protection #Board #BMS #PCM 2S 5A Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection Board BMS PCM Charging Voltage Range: 4.25-4.35V±0.05V Discharge Voltage Range: 2.5-3V±0.05V Maximum Working Current: 5A Conversion Efficiency: -40~+50℃ Limit Instantaneous: 7A Storage Conditions: -40~+80℃ Static Electricity: 50000H Resistance: <300mΩ Short Circuit Protection: To protect, restore must charge Charging Voltage: 8.4V-9V P+/P- input/output interface, the same combination when the battery voltage, capacity, internal resistance should be matched well, battery volatge around the rated voltage of 3.7V, combination without ouput, after the completion of voltage charging activation by 8.4V Diameter: 1.7cm/0.67inch Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 x Charger Protection

Description: Suitable for 14.4-18V lithium battery. Outdated protection, temperature control protection, safety and environmental protection. Exquisite workmanship, high-end texture, perfect compatibility. Durable, elegant and durable. Rated capacity: 1000MA. Specification: Material: Plastic. Input: 100V--240V. Fit Models: BL1415 BL1815 BL1830 BL1850. Charging Time: 2-6H. Size Chart: Size: 10x7x6cm / 3.94x2.76x2.36inch Package Includes: 1 Piece Lithium Charger(US Plug) Note: Color might be slightly different due to the color calibration of each individual monitor. Please allow slightly measuring deviation due to manual measure

Dear, welcome to walkaround, here are your favorite products, welcome to buy, we also provide 24H online Q&A to solve your problems. About product, please look down~ Ebike Li-ion LiPo Plastic Shell DC Head 26V/48V 2A Lithium Battery Charger for Electric Bicycle Black Features: 1. Adopting the latest international intelligent three-stage charging technology, combined with the use of electric bicycles in recent years. 2. Automatically control charging, fast charging, sufficient power, but no charge, no under charge, no water loss, and extended battery life. 3. All imported chips are used for scientific production under strict quality control. Discriptions: The charger is based on the modern high-frequency switching power supply structure, built-in microcomputer control, to achieve fast, balanced, turbulent, floating charge automatic control charging, charging speed, accurate and reliable. Instructions: 1. Connect the charger output cable to the electric vehicle charging port to ensure reliable connection. 2. Connect the charger to 220V, the charger starts working, and the charging indicator is red. 3. When the charging indicator turns green, the charging is complete, you can turn off the power and unplug the plug. 4. When the indicator light is orange, it indicates that the charger is not in good contact with the battery. Reconnect the charger to the battery after disconnecting the AC power. Specifications: Model: 36V/2A DC head, 48V/2A DC head Material: lithium battery + plastic case Colour: Black Size: 150mm*70mm*40mm/5.91*2.75*1.57'' Net weight: 303g Gross weight: 351g Warning Tips: 1. Lithium-ion battery chargers should be charged under the supervision of an adult when charging a lithium battery. 2. If you find that the defective lithium battery is hot and swollen, please turn off the power immediately to stop charging. Note: Please allow 1-3cm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Included: 1 x Ebike Lithium Battery Ch

Welcome to chendujia.vn Store ,We insist on the lowest price to sell the best quality items！！！Features: Enhanced version: Suitable for electric drills with a starting current of 80A or less, power below 170W, or resistive loads below 378W Balanced version: Suitable for electric drills with starting current below 80A, power below 170W Scope: Suitable for ternary lithium battery with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer battery, no size limit) Specifications: Color:As picture Quantity:1PC Charging voltage: 12.6V - 13.6V Size:41*55*3.4mm(Enhanced version),41*62*3.4(Balanced version). Package Include:1PC lithium battery protection board Note: 1.Please allow 0.1-0.3cm differences due to manual measurement, thanks. 2.Please understand because of the light irradiation or computer display difference, so I can't guarantee photos and real color is 100% the

#3.7V #4.2V #3A #Li-ion #Lithium #Battery #Charger #Protection #Board #For #18650 #TP4056 #DD05CVSA 3.7V 4.2V 3A Li-ion Lithium Battery Charger Protection Board For 18650 TP4056 DD05CVSA Description: Functions: Over Charge Protection Over Discharge Protection Short Circuit Protection Overcurrent Protection Note: Please charge the first time, activate the protection board. Otherwise there is no voltage output Wiring: B- connected to battery negative B+ connected to battery positive P+ Connect the charger/load positive P- Connect the charger/load negative Applications 3.7V lithium battery 18650 TP4056 Charging module Specifications: Over Charge Detection Voltage: 4.28±0.05V Over Charge Release Voltage: 4.26±0.05V Over Discharge Detection Voltage: 2.5±0.1V Over current Detection Current: 1-3A Overcurrent protection : 3.2±0.2A Size : 1.2x1cm/0.47x0.39inch Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 Pc x Battery Charger Protection Bo

#6S #22.2V #Li-ion #18650 #Lithium #Battery #BMS #Charger #Protection #Board #with #Balance 6S 22.2V Li-ion 18650 Lithium Battery BMS Charger Protection Board with Balance Feature: With Balance Overcharge protection Over-discharge protection Specifications: Charging electricity: 25.2V Max working current:8A Working Temperature:-40~+50 Storage Temperature:-40~+80 Life cycle:50000hours Size:6x4cm/2.36x1.57inch Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1x Lithium Battery BMS Charger Protection

Welcome to interfun store, have a good shopping! Description: 3S12.6V 20A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 59 * 20 * 3.4mm Charging voltage: 12.6V - 13.0V Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 10A Note 1: the successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!); If the battery is too small or drill power is too large Some can not start, please contact the owner to tell you the solution. Package Included: 1pcs 3S 20A 12.6V Cell 18650 Li-ion Lithium Battery Charger BMS Protection PCB Board \ (@^0^@) /Welcome to the worry-free grocery store! \ (@^0^@) / This is a worry-solving shop where you can find your happiness. ❃Satisfactory price and superior quality ❃Express delivery (delivery within 24 hours, arrival within 5-15 days) ❃Products updated in time Best smile service (if you have any questions, please contact us immediately) ☞Follow us to find more. You can get many unexpected surprises here. Have a nice shop

Welcome to interfun store, have a good shopping! Product Description 100% Brand new and high quality 3A 2S BMS 18650 Li-ion Lithium Charging Battery protection board 3A 2S BMS 18650 Li-ion Lithium Charging Battery protection board Feature : high-accuracy voltage detection circuit; terminal of the charger using high voltage device; Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit); MOS transistor can control the battery charge and discharge; Low standby current consumption. Over charge voltage range : 4.25±0.05V Package included:1 pcs \ (@^0^@) /Welcome to the worry-free grocery store! \ (@^0^@) / This is a worry-solving shop where you can find your happiness. ❃Satisfactory price and superior quality ❃Express delivery (delivery within 24 hours, arrival within 5-15 days) ❃Products updated in time Best smile service (if you have any questions, please contact us immediately) ☞Follow us to find more. You can get many unexpected surprises here. Have a nice shop