Digispark arduino

The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (ofcourse a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics. Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source Onboard 5V Regulator Built-in USB 6 I/O Pins 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED Package Contents: 1 x development board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (ofcourse a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics. Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source Onboard 5V Regulator Built-in USB 6 I/O Pins 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED Package Contents: 1 x development board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

ATtiny ATtiny85 Digispark Kickstarter Micro USB Development Board Module For Arduino IIC I2C TWI SPI Microcontroller ATTINY85 Digispark USB Development Board The Digispark is an Attiny85 based microcontroller development board similar to the line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar IDE the Digispark is a great way to jump into electronics, or perfect for when an is too big or too much. The Digispark is shipped fully assembled except for the two included and easy to solder headers. Here are the specs: Support for the IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection) On-board 500ma 5V Regulator Built-in USB 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ATtiny #ATtiny85 #Digispark #Kickstarter #Micro #USB #Development #Board #Module #For #Arduino #IIC #I2C #TWI #SPI #Microcontr

BBS:   http://forum.mhetlive.com/   The MH-ET LIVE Tiny88(16.0Mhz) based microcontroller development board similar  to the Arduino line, only cheaper, smaller, and a bit less powerful. With the ability to use the familiar  Arduino IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much.The MH-ET LIVE Tiny88(16.0Mhz) is shipped fully assembled except for the headersincluded and easy to solder them by yourself. Specs: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) 1. Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection) 2. On-board 500ma 5V Regulator 3. Built-in USB 4.  26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 5. 8k Flash Memory (about 6k after bootloader) 6. I2C and SPI 7. 26-PWM (26 pins with Software PWM,only two(D9,D10) with hardware PWM ) 8.  ADC on 8 pins 9.  Power LED and Test/Status LED 10. Size(mm):44.5x1

Digispark attiny85 is a microcontroller with attiny85 similar to arduino, a smaller form and cheaper price, and a little less powerful because its base is attiny85. Digispark attiny85 is the best option and is suitable for small projects. Specs: - support for the arduino ide 1.0 + (osx win linux) - power via usb or external source - 5v or 7-35v (automatic selection) - on-board 500ma 5v regulator - built-in usb (and serial debugging) - 6 i / o pins (2 are used for usb only if your program activated communications over usb otherwise you can use all 6 even if you are programming via usb) - 8k flash memory (about 6k after bootloader) - i2c and spi. - pwm on 3 pins (more possible with pwm software) Adc on 4 pins. - power led and test / status led (on pin0) - weight: 20g - size: 1.8cm x 2

MH-Tiny ATTINY88 micro development board 16Mhz /Digispark ATTINY85 Upgraded /NANO V3.0 ATmega328 Extended Compatible for Arduino MH-Tiny ATTINY88 micro development board 16Mhz /Digispark ATTINY85 Upgraded /NANO V3.0 ATmega328 Extended Compatible for Ar

MH-Tiny ATTINY88 micro development board 16Mhz /Digispark ATTINY85 Upgraded /NANO V3.0 ATmega328 Extended Compatible for Arduino MH-Tiny ATTINY88 micro development board 16Mhz /Digispark ATTINY85 Upgraded /NANO V3.0 ATmega328 Extended Compatible for Ar

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Bảng mạch ATTINY167 Digispark Pro Kickstarter Sử Dụng Cổng Micro Cho Arduino Usb Mô tả sản phẩm: 1. Tương thích với IDE 1.5 (OSX / Win / Linux) 2. Trình điều khiển được ký đầy đủ và có thể thực thi để cài đặt dễ dàng 3. Lập trình USB, mô phỏng thiết bị USB, mô phỏng cổng nối tiếp ảo USB-CDC 4. MCU AVR 16 MHz - sử dụng tinh thể chính xác 16Mhz thực sự 5. Bộ nhớ Flash 16KB (14,5K + sau bộ nạp khởi động) 6. Gỡ lỗi và giao tiếp qua USB liên tục! 7. 14 chân i/o (2 chia sẻ với USB) 8. I2C, SPI đúng, UART, LIN và USI 9. ADC trên 10 chân 10. 3 Kênh PWM (có thể được gán cho một loạt các chân) 11. Nguồn qua USB hoặc Nguồn bên ngoài - 5v hoặc 6-16v (lựa chọn tự động) 12. Nút trên bo mạch có thể được sử dụng làm nút đặt lại, chương trình hoặc người dùng - hoặc có thể bị vô hiệu hóa để sử dụng ghim đó làm i / o chung - mà không cần thay đổi bộ nạp khởi động 13. Bộ điều chỉnh 5V 150mA trên bo mạch 14. Đèn LED nguồn và đèn LED Kiểm tra / Trạng thái (trên Pin 1) 15. Người dùng có thể sử dụng dây nối hàn để tắt đèn LED và các tính năng khác để tiêu thụ điện năng thấp hơn 16. Hai lỗ lắp ghép. 17. Ghim/giãn cách tương thích với bộ cắm dây (ghim đầu ba cạnh chỉ để hỗ trợ tấm chắn kế thừa). Gói hàng bao gồm: 1 chiếc x Mô-đun ATTINY167 Trước khi mua: 1. Tất cả các sản phẩm đều có sẵn và chúng tôi sẽ gửi ngay lập tức nếu chúng tôi nhận được đơn đặt hàng. 2. Xin vui lòng đọc mô tả sản phẩm, nếu bạn có bất kỳ câu hỏi nào, đừng ngần ngại liên hệ với chúng tôi. Sau khi mua: 1. Nếu bạn hài lòng, xin vui lòng đánh giá cho chúng tôi 5 sao 2. Xin vui lòng liên hệ với chúng tôi trước khi bạn sẽ cho chúng tôi đánh giá tiêu cực. Chúng sẽ giúp bạn giải quyết các vấn đề. Nếu bạn nhận được một mặt hàng bị lỗi, vui lòng liên hệ với chúng tôi ngay với hình ảnh hoặc video #Digispark #Pro #kickstarter #development# board #use #Micro #ATTINY167 #module

Mạch Arduino ATTiny85 USB Digispark là phiên bản nhỏ gọn nhất hiện tại của Arduino do DigiSpark phát triển dựa trên nền MCU ATTiny85 với khả năng kết nối trực tiếp máy tính qua cổng USB để nạp chương trình, mạch có cách sử dụng và lập trình tương đương với các phiên bản Arduino trước đó: Arduino Uno, Nano, Mega 2560,…., với kích thước nhỏ gọn (bằng đốt ngón tay cái), độ cơ động cao, và giao tiếp USB, sản phẩm này là sự lựa chọn phù hợp cho nhiều ứng dụng khác nhau. THÔNG SỐ KỸ THUẬT ARDUINO ATTINY85 USB DIGISPARK Vi điều kiển chính: ATTiny85. Firmware: Arduino ATTiny85 USB Digispark Điện áp sử dụng: 5VDC từ cổng USB hoặc 6~12VDC từ chân Vin. Support for the Arduino IDE 1.0+ (OSX/Win/Linux) On-board 500ma 5V Regulator Built-in USB 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI)PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Statu

Specs: - support for the arduino ide 1.0 + (osx win linux) - power via usb or external source - 5v or 7-35v (automatic selection) - on-board 500ma 5v regulator - built-in usb (and serial debugging) - 6 i / o pins (2 are used for usb only if your program activally communicates over Usb otherwise you can use all 6 even if you are programming via usb) - 8k flash memory (about 6k after bootloader) - i2c and spi (vis usi) - pwm on 3 pins (more possible with pwm software) Adc on 4 pins. - power led and test / status led (on pin0) - weight: 4g - size: 1.8cm x 2

Welcome to bestbuyshop.vn! Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development board WISH YOU HAVE A GOOD

Welcome to 【Habitater Store】 ,We insist on the lowest price to sell the best quality items！！！Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

1Pc ATTINY85 Digispark kickstarter Arduino general micro USB developmentDescription: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

The MH-ET LIVE Tiny88(16.0Mhz) based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With the ability to use the familiar Arduino IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much.The MH-ET LIVE Tiny88(16.0Mhz) is shipped fully assembled except for the headersincluded and easy to solder them by yourself. Specs: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) 1. Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection) 2. On-board 500ma 5V Regulator 3. Built-in USB 4. 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 5. 8k Flash Memory (about 6k after bootloader) 6. I2C and SPI 7. 26-PWM (26 pins with Software PWM,only two(D9,D10) with hardware PWM ) 8. ADC on 8 pins 9. Power LED and Test/Status LED 10. Size(mm):44.5x18.3x3 More details can feel free to contact us, Tha

Welcome to 【Habitater Store】 ,We insist on the lowest price to sell the best quality items！！！Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

Brd-0036 Description: Digispark attiny85 is an attiny85 microcontroller development board Similar to arduino, only cheaper, smaller, and less powerful Because the base is attiny85. With a large amount of protection for Expanding its functionality and the ability to use arduino 's idea to Programming it, digispark attiny85 is the best option and suitable for when A arduino is too big or too expensive for a project-project Small. Let gan please be in order. Specs: - support for the arduino ide 1.0 + (osx win linux) - power via usb or external source - 5v or 7-35v (automatic selection) - on-board 500ma 5v regulator - built-in usb (and serial debugging) - 6 i / o pins (2 are used for usb only if your program activated communications over Usb otherwise you can use all 6 even if you are programming via usb) - 8k flash memory (about 6k after bootloader) - i2c and spi. - pwm on 3 pins (more possible with pwm software) Adc on 4 pins. - power led and test / status led (on pin0) - weight: 4g - size: 1.8cm x 2.6cm. Application: - controller. - smarthome. - bluetooth control - oled control. - arduino replacement. Related products Please visit the following link to see other arduino types like Mega 2560, nano and non arduino board like stm32: : - 1x1 digispark attiny85 kickstarter

Hello, thank you for coming to our store. The items in our store are 98% ready yes, before the checkout please read the description until it 's finished so there is no mistake in booking the item Digispark arduino development board with usb connector Latest price: Rp.97000 Description: Digispark is a super mini development board that is suitable for products that require low cost but easy to program. Usb or external source - 5v or 7-35v power On-board 500ma 5v regulator Built-in usb (for debugging series) 6 i / o s (2 used for usb, but it can still be used for other purposes) 8k flash memory I2c and spi Pwm on 3 (can also be more if using library software pwm) Adc on 4 Led for status and power Tutorials are available in the shed. Freelab only sells arduino and digispark clone to make it affordable. Not ready for ori. To ask about technical and other matters, add freelab or yes: Note: Xproducts are 98% ready ya kak for this month in our store. X the complete address content is included in the active no.hp to facilitate the delivery process X please make the address as plain as (street names, no houses, rt / rw etc.) to ease delivery X the resi will automatically be routed within 2x24 hours after the order is processed. X all the information on the existing product is in accordance with the circumstances X the red date of the holiday delivery ya sis:) Happy shopping: #Home furnishings #Exchange device #Toolbox Sku: 3131 / 1064504846065516544

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! Digispark attiny85 micro usb development board arduino

[turn] 1Pc ATTINY85 Digispark kickstarter Arduino general micro USB development board [my] Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

Welcome to duolaameng.vn shop！ [duo] 1Pc ATTINY85 Digispark kickstarter Arduino general micro USB development board [vn] Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

Hello, thank you for coming to our store. The items in our store are 98% ready yes, before the checkout please read the description until it 's finished so there is no mistake in booking the item Digispark arduino development board with micro usb board Latest price: Rp.94000 Description: Digispark is a super mini development board that is suitable for products that require low cost but easy to program. Usb or external source - 5v or 7-35v power On-board 500ma 5v regulator Built-in usb (for debugging series) 6 i / o s (2 used for usb, but it can still be used for other purposes) 8k flash memory I2c and spi Pwm on 3 (can also be more if using library software pwm) Adc on 4 Led for status and power Tutorials are available in the shed. The usb cable is not included. Freelab only sells arduino and digispark clone to make it affordable. Not ready for ori. Freelab received cod and courier (grabbike / gojek) in seputaran grand indonesia, jakarta. Call for stock information and other marketing sales. To ask about technical and other matters, add adv7163u, or 573024fd ya:) Note: Xproducts are 98% ready ya kak for this month in our store. X the complete address content is included in the active no.hp to facilitate the delivery process X please make the address as plain as (street names, no houses, rt / rw etc.) to ease delivery X the resi will automatically be routed within 2x24 hours after the order is processed. X all the information on the existing product is in accordance with the circumstances X the red date of the holiday delivery ya sis:) Happy shopping: #Home furnishings #Exchange device #Toolbox Sku: 3131 / 1063009004175409152

Digispark attiny85 miniatures arduino board usb Xthis is not the ori board of digisparkx it was developed opensource The attiny85-based arduino can be programd using arduino ide (follow the tutorial below to add the board). Because of the limited size and cost of the economy, of course this board is not ' match ' arduino 's board is generally (which uses avr atmega) Specs: Support arduino ide 1.0 + (osx / win / linux) Power via usb or external source 7-12v 5v 500ma on-board regulator Usb built-in pcb I / o: 6 i / o pins (2 are used for usb only if your program activity communications over usb) Flash: 8k flash memory about 6k after bootloader All pins can be used as digital i / o Pin 0 i2c sda, pwm Pwm 1 pin (onboard led) 2 i2c sck pin, analog in. 3 in (also used for usb + when usb is in use) Pwm 4 pin, analog (also used for usb-when usb is in use) 5 analog in pin - link downloading driver: https://github•com/digistump/DigistumpArduino/r... - tutorial to add his board to arduino 's idea: http://digistump•com/wiki/digispark/tutorials/

Specifications: Support for the IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on

Description: Support for Arduino IDE 1.0+ (OSX / Win / Linux) Power via USB or External Source - 5V or 7 -35V (automatic selection) On-board 500ma 5V Regulator Built-in USB(and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB) Specification: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Includes: 1pc*Development Board Note: -Due to the light and screen difference, the item's color may be slightly different from the pictures. -Please allow 1-2 cm differences due to manual measure

Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

1Pc ATTINY85 Digispark kickstarter Arduino general micro USB developmentDescription: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

The ATtiny85 based mini development board is similar to the Arduino, but cheaper and smaller (ofcourse a bit less powerful). With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE, this board is a great way to jump into microcontroller electronics. Support for the Arduino IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source Onboard 5V Regulator Built-in USB 6 I/O Pins 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED Package Contents: 1 x development board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: Brand new and high quality. Support for the Arduno IDE 1.0+ (OSX/Win/Linux) Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0) Package Included:1 x ATTINY85 Digispark kickstarter Arduino general micro USB development

<div><p>Size:1.8cm x 2.6cm Color:Black Model:ATTINY85 Type:Development board Package includes:1pc ATTINY85 Development board Specfication: Power via USB or External Source - 5v or 7-35v (automatic selection) On-board 500ma 5V Regulator Built-in USB (and serial debugging) 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after bootloader) I2C and SPI (vis USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED (on Pin0)</p><