Đèn led rgb cắm mainboard

WS2812B is the second generation with the built-in IC and 5050RGB lamp bead type with four feet.WS2812B's feet are less than WS2812 with 6 and the circuit is more conciseIt. It can be used for Naze32, CC3D flight control and can show the flight control lock / unlock, left aileron, brake, throttle, alarm and other status. Platform: AVR, for Arduino,Naze32/CC3D Flight Control(Refurbish to be CleanFlight)5050 Highlight LED,Built-in control chip.It can control one or more LED with just only one IO port. Signal can Stable display and not cumulate in distortion with the Chip built-in circuit.Three primary level 256 can adjust brightness.160000 color image display the effect.Not less than 400 HZ/S scanning frequency. Serial interface level can complete the data through a signal receiving and decoding. Highlight LED, high light color brightness uniformity.There are interfaces at both ends(DIN DOUT).They can be concatenated. LED: 5050 Package RGB full color highlighting WS2812B lamps*8 Voltage: 5V(4-7V) Size: 5.3*0.8*0.2cm colour: white Material: plastic Port: Digital Remark: It need to refurbish CleanFlight and use PPM receivers when used in Naze32 or CC3D flight control. CleanFlight supports up to four lights, namely 32 WS2812B lamp beads. CC3W need Refurbish to be CleanFlight. Use PPM/SBUS receiver,PWM Receiver mismatch. Only match RC Quadcopter. Options election in CF assistant software: PPM Receiver,then check LED_STRIP Finally into the CF assistant software LED Strip Page Setup various states Package Include: 1 x Full-Color Driving LED Lights Board Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

WS2812B is the second generation with the built-in IC and 5050RGB lamp bead type with four feet.WS2812B's feet are less than WS2812 with 6 and the circuit is more conciseIt. It can be used for Naze32, CC3D flight control and can show the flight control lock / unlock, left aileron, brake, throttle, alarm and other status. Platform: AVR, for Arduino,Naze32/CC3D Flight Control(Refurbish to be CleanFlight)5050 Highlight LED,Built-in control chip.It can control one or more LED with just only one IO port. Signal can Stable display and not cumulate in distortion with the Chip built-in circuit.Three primary level 256 can adjust brightness.160000 color image display the effect.Not less than 400 HZ/S scanning frequency. Serial interface level can complete the data through a signal receiving and decoding. Highlight LED, high light color brightness uniformity.There are interfaces at both ends(DIN DOUT).They can be concatenated. LED: 5050 Package RGB full color highlighting WS2812B lamps*8 Voltage: 5V(4-7V) Size: 5.3*0.8*0.2cm colour: white Material: plastic Port: Digital Remark: It need to refurbish CleanFlight and use PPM receivers when used in Naze32 or CC3D flight control. CleanFlight supports up to four lights, namely 32 WS2812B lamp beads. CC3W need Refurbish to be CleanFlight. Use PPM/SBUS receiver,PWM Receiver mismatch. Only match RC Quadcopter. Options election in CF assistant software: PPM Receiver,then check LED_STRIP Finally into the CF assistant software LED Strip Page Setup various states Package Include: 1 x Full-Color Driving LED Lights Board Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: Support For: For Raspi Voice HAT is a for Raspberry Pi dual-microphone expansion board specially designed for AI and voice applications. It supports for Raspberry Pi 4 Model B/ 3B+/ 3B/ 2B. Now you can build a more powerful and flexible voice product that integrates for Amazon for Amazona voice service, for Google Assistant, for Baidu AI, etc. Voice Recognition Function: The board is an audio module designed based on the for Raspberry Pi. It uses the WM8960 low-power stereo codec, which is controlled by the I2C interface, and the audio is transmitted through the I2S interface.  Dual Speakers: There are two microphones on both sides of the circuit board to collect sound. It also provides 12 APA102 RGB LEDs and an onboard speaker, and provides a user button and an I2C interface for expanding applications. Audio Output: In addition, the on-board 3.5mm audio jack or JST 2.0 speaker output can be used for audio output, and music can be played through an external headset, and it can also be played with an external speaker through the dual-channel speaker interface.  Stereo Recording: There is a high-quality MEMS silicon microphone on the left and right sides of the expansion board, which can record in stereo. Specifications: Item Type: Expansion Board Material: Metal+Electronic Elements Color: Blue Applicable Model: For Raspberry Pi 4B Voice HAT  Supply Voltage: 5V Logic Voltage: 3.3V DAC SNR: 98dB Control Interface: I2C Audio Interface: I2S SNR: 94dB Audio Codec Chip: WM8960 Expansion Interface: 1x I2C, 1x Button Power Interface: 1xType-C interface (5V) Headphone Driver: 40mW ([email protected]) LED Interface: 12 APA102 programmable RGB LEDs, connected to SPI interface Speaker Driver: 1W per channel (8N BTL) (onboard mono speaker) Size: About 65 x 56mm/2.56 x 2.2inch(L x W) Package Includes:  1Pc x Expansion Board(not include for Raspberry Pi board) #Expansion #Board #Dual #Mic #Computer #Accessories #Amplifier #Module #Audio #Type #C #Recordin

KY-016 RGB LED 3 Color Light Module MCU AVR PIC Raspberry DIY Kit Description: RGB LED module LED is made of a plug-in full-color, by R, G, B three-pin PWM input voltage can be adjusted in three primary colors (red / blue / green) strength in order to achieve full color mixing effect. Control module with for Arduino cool lighting effects can be achieved. Product parameters: Use plug-in full-color LED RGB tricolor limiting resistor to prevent burn Three primary colors can be mixed to get different colors by adjusting the PWM Can interface with a variety of microcontrollers Operating voltage: 5V LED drive mode: common cathode drive Package Included: 1 x KY-016 RGB LED Module 3 Color Light For Arduino MCU AVR PIC Raspberry #KY-016 #RGB #LED #3Color #Light #Module #MCU #AVR #PIC #Raspberry #DIY

Description: Reliable and easy to use connection for bending your strips around a corner, extending them across a gap, or connecting them to a power supply or dimmer Solderless connection can be used by anyone. No tools or electrical experience required Connects easily to a cut section of LED light strip. Simply open the clasp, make sure the strip aligns with the connector (match the positive terminals), and slide it underneath the contact prongs. Compatible with any 10mm strips Suitable for 5050 LED light strip RGB Specifications: Pins of single color led strip: 4 pins Led strip wideth: 10mm Working Tempreture:0~50℃ Storage temp: -20~60℃ Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 Pc x LED Conn

ĐÈN LED YONGNUO YN360 được thiết kế đặc biệt chuyên dụng cho quay phim và nhiếp ảnh . Hệ thống LED siêu sáng 360 bóng , có thể tăng giảm công suất, thay đổi màu đèn đa dạng độc đáo. ĐÈN LED YONGNUO YN360 có khe pin dùng được các dòng pin rời thông dụng như F970, F770, F570 nên rất tiện lợi. Ngoài ra thiết bị còn có thể cắm nguồn adapter để dùng tại nhà . Có lỗ ốc 1/4in thông dụng có thể gắn lên hầu hết các tripod. Đèn LED YONGNUO CHÍNH HÃNG luôn đảm bảo độ bền lâu dài và hiệu quả cao cho người sử dụng THÔNG SỐ KỸ THUẬT: Hãng SX: Yongnuo Model: YN360 Số bóng: 360 bóng (160 3200K LEDs, 160 5500K LEDs, 40 RGB SMD LEDs) Nhiệt độ màu: 3200 - 5500K (LEDs) Đỏ, Xanh lam, Xanh lá (RGB LEDs) Điều khiển: Trực tiếp trên đèn hoặc Mobile app Nguồn: adapter 8 VDC, 5 A hoặc NP-F750 battery (Không bao gồm pin trong bộ sản phẩm) Lumens: 2560 lumens Thời lượng sử dụng: 2 giờ max (3200K-5500K Color Temp Mode)/ 4 giờ max (RGB Full Color Mode) (pin NP-F750) Khoảng cách sử dụng: 49' (15 m) với mobile app Sử dụng: Cầm tay hoặc gắn lên chân đèn vít 1/4 inch Kích thước: 583 x 48 x 24 mm Khối lượng: 489 g Sản phẩm gồm: 1x Yongnuo YN360 LED light 3200-5500K 1x Orange filter 3200K 1x Hộp 1x Túi đựng LƯU Ý: Sản phẩm chưa bao gồm PIN hoặc ADAPTER NGUỒN ........................................... SHOWROOM THIẾT BỊ QUAY PHIM Đ/c: 310B Khương Đình, Thanh Xuân, Hà Nội Hotline: 0246.293.2899 / 0972 055 880 / 0966 20

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Xin lỗi vì sự bất tiện này, tôi xin lỗi vì bạn không nhận được hàng. tôi đã vận chuyển hàng, nhưng gần đây trên toàn thế giới đang có dịch bệnh, hầu hết công ty vận chuyển hàng chậm, bạn có thể đợi lâu hơn một chút, nếu bạn vẫn không nhận được hàng, hãy liên hệ với chúng tôi. Chân thành cám ơn

Đèn led video Ulanzi VIJIM VL-3 RGB được thiết kế gọn nhẹ, kích thước tương đương một chiếc điện thoại smartphone, tiện dụng cho người dùng, đặc biệt là các khách hàng yêu thích sự gọn nhẹ và tinh tế. Chế độ màu HSI & Chế độ đầy màu sắc: HUE có thể điều chỉnh 360 °, điều chỉnh độ bão hòa 100 mức và độ sáng có thể điều chỉnh 0-100, có thể đạt được tới 3.600.000 màu. Đèn VIJIM VL-3 RGB tích hợp pin lithium dung lượng lớn 4500mAh mà không lo không đủ năng lượng khi quay. THÔNG SỐ KỸ THUẬT: Hãng sản xuất: Ulanzi Model: VIJIM VL-3 RGB Công suất: 10W CRI: >96 Nhiệt màu: 3000K – 6500K RGB Dung lượng pin: 4500mAh Cổng sạc: Type-C Điện áp đầu vào: 5V 1A / 2A Điện áp đầu ra: 5V 1A Kích thước: 145x73x10mm Trọng lượng: 190g Bảo hành: 12 tháng ........................................... SHOWROOM THIẾT BỊ QUAY PHIM Đ/c: 310B Khương Đình, Thanh Xuân, Hà Nội Hotline: 0246.293.2899 / 0972 055 880 / 0966 20

8 Channel WS2812 5050 RGB LED Lights Development Board Description: Intelligent reverse connect protection, the power supply reverse connection does not damage the IC. The control circuit and the LED share the only power source. Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s. Cascading port transmission signal by single line. Any two point the distance more than 5m transmission signal without any increase circuit. When the refresh rate is 30fps, cascade number are not less than1024 points. Send data at speeds of 800Kbps. The color of the light were highly consistent, cost-effective.. Applications : Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen. Package Included: 1 X WS2812 5050 RGB LED Module #8Channel #WS2812 #5050 #RGB #LED #Lights #Development #

Feature: LED RGB cable wire extension cord for 5050 RGB LED Strip Perfect for connect or extension of LED RGB Strip The connection between Connector and RGB lights The connection between Lights and lights The connection between Connector outputs to signal transmission amplifier It's time saving and convenient for installation with artistic wiring Specification: Material: PVC Led strip 5050 connector with line Used for: Led strip 5050 RGB Working temp.: 0~40℃ Storage temp.: -20~60℃ No need soldering Wire length: 17cm Led strip width: 10mm Quantity: 1 Pc Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 Pc x Extension W

WS2812 16 Bits LEDs Built-in Full-color Drive Lamp WS2811 5050 RGB LED Ring Lamp Light With Integrated Drivers Model: 16 Round 5050 full-color LED module Dimensions: Diameter 60mm Chip: WS2812 (built-in LED) LED: 5050 RGB full color highlight package Voltage: 5V Port: Digital 5050 highlight LED, built-in control chip, only an IO port to control multiple LED Chip built shaping circuit, signal distortion is not cumulative, stable display Adjust brightness tricolor 256, 160,000-color TFT display, scanning frequency of not less than 400Hz / S Serial even level interface, via a signal line to complete the reception and decoding of data Refresh rate of 30 frames / sec, even low-level mode even series of not less than 512 points Send and receive data at speeds up to 800Kbps Highlight LED, light color high brightness consistency Both ends even level interface, can be connected directly #WS2812 #16Bits #LEDs #Built-in #Full-color #Drive #Lamp #WS2811 #5050 #RGB #LED #Ring #Lamp #Light #With #Integrated #Dri

Đèn Led Pha 50W ngoài trời tiết kiệm điện 220V Mô tả sản phẩm Đèn Led Pha 50W Ngoài Trời Chống Mưa 220V Công nghệ độc quyền: keo niêm phong 360°không thấm nước (bảo vệ nguồn) Nguồn định dòng hợp kim nhôm, tuổi thọ cao Tiết kiệm điện lên đến 60% điện năng tiêu thụ Size: 22cm x 10cm x 3cm Công suất: 50W siêu sáng #đèn #đèn_trang_trí #decor #đèn_tường #đèn_gắn_tường #đèn_decor #đèn_hiện_đại #đèn_tường_hiện_đại #rẻ #đèn_gắn_tường_giá_rẻ #đèn_rẻ #đèn_pha_led #đèn_pha #đèn_pha_led_50w #đèn_pha_led_50w #đèn_pha_led_ngoài_trời #đèn_hắt_led #đèn_pha_ngoài_trời #đèn_pha_led_rạng_đông #đèn_pha_led_ngoài_trời #đèn_hắt #đèn_hắt_biển_quảng_cáo #đèn_nhà_xưởng #đèn_công_trình #đèn_led_chiếu_biển #đèn_led_50w #Đèn_pha_chiếu_biển_quảng_cáo #denledphadoimau #dendoimau #denphaleon #denleon #leon #denchon

Descriptions: Portable LED light strip of 5V USB Power,can add a lot of personalized "mood" in the dark , also relieve your eyestrain. Not just RGB but 16 multi outstanding light color choice to present a visual feast.Perfect for TV background decor Come with 3 key mini controller. You can change its color, speed and brightness as well as different lighting modes directly The humanized design of each one led a cut, easily adjust to your desired length without any waste & damage. Advanced adhesive backing tape with excellent viscosity. Easy and quick installation in few seconds Features: 1. Low power consumption,Super-bright but running with low temperature. 2. All the light spread and completely smooth,luminous very even. 3 Self-adhesive back with adhesive tape for secure and easy application. 4. LED Type: High Quality 3528 SMD LED, high intensity and reliability, Long lifespan This ingenious USB LED strip light will instantly transform TV into an object of beauty Easily take advantage of this incredible gadget as long as TV has a USB port(all modern TV's do) Peel off the adhesive cover, apply to the surface behind TV and plug into USB port This USB strip light is not just for TV's – it can also be used on computer monitors, in the car or anywhere where have a spare USB port. TIPS: Long press the middle key (SPEED/BRIGHT) to turn on/off unit. It will restore to previous status. Specifications: LED Type: 3528 SMD Light Color: RGB PCB Color: Black LED quantity: 30smd/m Waterproof Level: Non Waterproof Dimming level: 8 level Static color: 20 kinds Dynamic Mode: 21 kinds Speed level: 5 levels Operating voltage: DC 5V Viewing Angle: 120 ° Operating temperature: -20 to 50℃ Strip Length: 0.5m/1m/2m USB Cable length: 100cm Quantity: 1 Set Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Contents: 1 Pc x Strip Light 1 Pc x USB Cable with 3 Key RGB Controller

Welcome to the new york city Check orders at 2 p.m. every day, except for quality problems or shutdowns, and normally 24 hours.No shipment will be made on a weekly or statutory holiday. Need to change or cancel the order must be diskussed before three o 'clock in the afternoon of the next order, sending us will not be able to modify or cancel! Bulk production of consumables, if there are minor defects, please forgive me!Perfectionist, subscript please be careful, do not want to cause each other trouble! (miss shop will check before shipment please buy it at ease) We support buy, wholesale, price beautiful, large quantity negotiable, can take over factory order business, welcome to chat If you have any questions, please talk to us All activities to store home announcement m

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

The music controller supports music induction rhythm + 5V light effect synchronization,16 million color magic light effect, wireless remote control to turn off the lights, speed adjustment, brightness adjustment, hundreds of built-in lighting es, and various gameplays. The RGB light can be controlled by the controller to realize the lighting effect of the mufti group lighting components.Switch the mixed color music e, the fan lights will jog with the music rhythm, On board indicator light: the abnormal state of the blue light flashing, the normal state of the blue indicator light often. The colorful music e can be switched with the remote control, and the fan lights follow the rhythm of the music. Press and hold for more than 5 seconds for one-to-one lock code to prevent other wireless interference. The light turns red to indicate a successful lock code. Interface: The controller has 10 fan interfaces and 2 LED (light bar) interfaces. Cooling: 12cm seven streamlined fan blades, efficient heat dissipation. Silent: The four corners are equipped with rubber damping pads to reduce the resonance between the fan and the chassis and effectively reduce noise. Adjustable: The controller can adjust the speed and brightness. Multi light effect es: the controller supports single-color breathing, multi-color breathing, fast flashing and slow flashing, marquee lights, breathing lights, and other light effect es. colour:black Material:plastic size:9.3*6.5cm Package Contents: 1* Remote Control(Battery included) 1* Control PanelOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#120/140mm #RGB #Colorful #LED #Fan #Halo #Aperture #for #Synchronous #Motherboard #Control #cpu #fan #controller 120/140mm RGB Colorful LED Fan Halo Aperture for Synchronous Motherboard Control cpu fan controller Description: 100% brand new and high quality Feature: High and stable performance, it can be installed on the different fans. Ultra-thin design, comes with the +5V 3Pin colorful connector. It can help to support chassis light synchronization. 120mm/140mm RGB Colorful LED Rainbow color fan optional. Easy and simple to install and remove, no other tools needed. Support using 3 pin 5v AURA Cable Connect to Motherboard (MSI,AS-US ASROCK ) to realize the light control. Specifications: Item Type: LED Rainbow Color Fan Material: ABS Size: A: 120x120mm/4.7x4.7in, B: 140x140mm/5.5x5.5in Color: As shown Optional Type: A, B Voltage: 5V Quantity: 1 PC Note: Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x LED Rainbow Colo

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Xin chào tất cả mọi người, công ty của chúng tôi là ở Thâm Quyến, chúng tôi chuyên bán các linh kiện điện tử. Nếu bạn đặt nhiều sản phẩm, chúng tôi có thể cần thêm thời gian để xử lý, hãy kiên nhẫn. Nếu bạn trò chuyện với chúng tôi mà chúng tôi không trả lời bạn, đừng lo lắng, chúng tôi đang cố gắng xử lý đơn đặt hàng của bạn, vì vậy xin đừng hủy đơn đặt

Pay attention: White PCB Black PCB 30leds/m IP30: Non- waterproof IP65: Waterproof in Silicon Coating IP67: Waterproof in SiliconTube the length as you choose Product Decsription: -WS2812B Strip is powered by a 5V power supply (not included) and is controlled by a single data line from a suitable controller (not included). 2) 3-pin JST connector included: Red:VCC, Blue:GND, Green:DATA. -The strip has 3M adhesive tape on the back. Installation surface must be smooth, clean and dry. -Strip can be cut between every LED to create custom lengths. -Do not bend strip sharply. -Longer runs should be powered from both ends to reduce voltage drop. Products Application: WS2812B dream color strips can be used for TV hotel, KTV, bar, game room and other leisure, entertainment decoration to heighten the atmosphere, car chassis, car decoration, shop decoration, home decoration and other decoration. product details: Input voltage:DC5V Power:30leds/m----9watt/meter LED resource:WS2812B led(5050 SMD RGB LED with built-in improved version of ws2811 ic) LED:each LED is separately controlled IC Type:improved version ws2812 IC(built inside the 5050 smd rgb led) of IC:(1 IC drives 1 led chip) Pixels:30meter Pitch:16.6mm(1000/64) Grey scale:256 Bits/color:8-bits/color FPC Width:30leds/m----10mm FPC color:black/white Protection rate:IP30/ IP65 /IP67 Colors:Full color RGB, dream color changing Cuttable:every LED is cuttable Package:in anti-static bag,IP30 IP65 with 3M adhensive tape on the back(IP67 without 3M adhensive) package include: 1m/2m/3m/4m/5m ws2812 led strip(according your ch

Item Type: Tail Light Assembly Wattage: Consistent with the Motorcycle Item Type: Motorcycle LED Tail Light With Turn Signals Condition:100% Brand New Lenses Color: Clear Fitment: For Honda CBR650R 2019 For Honda CB650R 2019 For Honda CB300R 2018 2019 For Honda CB250R 2018 2019 ( Please Ensure This Part Fits For Your Motorcycle Before order ) colour:black Material:plastic Package Contents: 1 x Turn signal LampOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Buyer Attention: IP20------- non-waterproof IP20 IP65------- waterproof silicon coating IP65 IP67------- waterproof silicon tube IP67 Smart LED STRIP RGB WS2812B SMD 5050 RGB LED Light 144pcs 5050 RGB LED With 144pcs WS2811 IC inside to drive 144 pixels,Connecting with the controller can get more than 80 programs which are various color changing and almost magic effect. Specfication: IC Type:.............WS2812B LED chip (4Pins 5050 SMD RGB LED with built-in WS2811 IC); LED Type:.............5050 SMD RGB LED; Input Voltage:.............DC5V input; Power:.......................43.2watt/meter, 86.4watt/roll; LED Number: ...............144leds/meter,288leds/roll, each LED is separately controlled; Qty of IC: ..................144IC/meter (1 IC drives 1 led chip); 288pcs ws2811 ic per roll; Pixels Qty:.........................144pixels/meter; 288pixels/roll; Pitch: .........................6.94mm(1000/144); Grey scale: ..................256; Bits/color: ...................8-bits/color;24bit for RGB FPC size: ....................Width: 12mm, High: 2.5mm; FPC color: ...................White PCB/Black PCB; Protection rate..............Non-waterproof IP20,waterproof silicon coating IP65,waterproof silicon tube IP67; Emmitting Color: ........................Digital Full color RGB, dream color changing; Cuttable:......................every LED is cuttable; 1led/cut; Working Temperature: ....................-40~60 °C ; View angle: ....................120degree ; lifespan: ....................50000hours; Warranty: ....................2years; Certification: ....................CE & RoHS; Package: ....................2meters/reel in anti-static bag. Notice: Please use DC5V only; There are direction arrows on the PCB, arrow direction for connecting next reel strip; GND not only for power wire, also as signal wire, need connect to both power and controller; The Max distance between strips is 5m-10m, need use amplifier when more than 10m; Every 5m strip need re-connect to power supplier, avoiding voltage drop; Keep the surface of installation place clear and smooth, avoiding the strip fall off. DO NOT press the LED; DO NOT attempt to make sharp bend with the strip; DO NOT install where water or high humidity may be present without further protection; Away from strong acid or strong alkali wiring instruction: 3Pins JST connector: RED cable = +5V (5V power supply's positive pole) Green cable = GND (Ground, LED Pixel controller's GND Port) White cable = DAT (DATA, LED Pixel Controller's DAT Port) Extra two cable: RED cable = +5V ( 5V power supply's positive pole) White cable = - 5V (5V power supply's negative pole) Package included: 1*1M WS2812b 144leds Led Strip

- HUB Aura Sync P-ARGB V2.0 Coolmoon cho Fan Led RGB và đèn Led RGB đồng bộ Mainboard máy tính - Hub dùng cho các quạt có cổng 3/4 pin, không có led hoặc có led 5V-ARGB 3 pin - Hub có 8 cổng 4 pin PWM gắn quạt và 10 cổng Led 3 pin 5V – ARGB. - điều chỉnh tốc tự động theo quạt CPU ( nhanh chậm theo nhiệt độ Chip CPU ) - điều chỉnh màu - hiệu ứng tùy ý bằng Remote, có thể đồng bộ Led với Mainboard có cổng Led 3 pin 5V – ARGB. - chỉnh bằng Remote hoặc điều chỉnh trong Bios hay phần mềm trong Windows. - Hướng dẫn sử dụng: 1 – Gắn quạt và dây led của quạt vô Hub. 2 - Gắn dây cấp nguồn cho Hub vô nguồn máy tính qua cổng SATA trên bộ nguồn. 3 - Gắn dây Sync Led 5V vô Mainboard nếu cần đồng bộ Led với Mainboard. 4 - Nhấn nút R/M trên Remote để chuyển sang Sync - đồng bộ Led với Mainboard, để chuyển lại dùng bằng Remote thì nhấn lại nút R/M 1 lần. * Lưu ý nếu gắn quạt CPU vô Hub: 1 - Gắn dây 2 pin, 1 đầu vô Hub, 1 đầu vô cổng 4 pin CPU Fan trên Mainboard. 2 - Gắn dây của quạt CPU vô cổng màu Đỏ trên Hub, các quạt 3/4 pin khác gắn vô các cổng màu

Dear, welcome to Mocean, there is the latest season of products, you are welcome to choose, we also provide 24H online Q & A, you have any questions, please come to inquire, about the product, please go down and see ~ Features: RGB motherboard can be connected with RGB products on the same side through RGB wiring, realizing synchronous lamp control between RGB products and RGB motherboard. Or RGB products can control lamp effect, which can be controlled by RGB motherboard. After all RGB products are connected, they are either controlled by the RGB motherboard or synchronized by the motherboard with monochrome/breathing/circulation/gradient control. Specifications: Support Motherboard: for Giga/Microstar/Asus RGB motherboard Synchronous Lamp Control Accessories: Radiator, chassis lamp belt, etc Interface: 12 V 4 Pin Color: Black Line Length: 60 cm/23.62'' Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3mm measuring deviation due to manual measurement. Included: 1 X RGB Connector C

Cuộn đèn led dây trang trí RGB nhiều màu sắc này có thể sử dụng để trang trí nội thất nhà ở, văn phòng, chiếu sáng lều hoặc khu vực cắm trại. Sử dụng nguồn 5V với đầu cắm USB, thiết kế dải keo dính phía sau giúp bạn đễ dàng set up đèn đep mắt. Đèn có bộ điều khiển kết nối với ứng dụng đa năng trên điện thoại ios android thông qua cổng bluetooth. TÍNH NĂNG: - Tiết kiệm năng lượng và tạo nhiệt thấp; - Màu sắc đồng nhất và góc phát sáng bóng đèn lớn (120 °); - Linh hoạt có thể uốn cong theo ý muốn mà không bị gãy. - Màu sắc tinh khiết, mềm mại có thể được tùy chỉnh thay đổi theo ứng dụng đi kèm, - Tuổi thọ trung bình là 50,000 giờ liên tục mà không cần bảo trì. - Sản phẩm nhẹ và mỏng, thích hợp để lắp đặt trong mọi không gian; - Có 3M băng dính hai mặt ở mặt sau của dải đèn LED, thuận tiện cho việc lắp đặt và lay out theo ý tưởng riêng; - Điện áp thấp (sử dụng nguồn điện USB DC5V), đảm bảo an toàn trong quá trình sử dụng; - Có thể cắt ngắn tại các vị trí đánh dấu theo ý thích. - Đèn tích hợp bộ cotroller kết nối với ứng dụng điều khiển đa chức năng trên smartphone (ios hoặc android), mang lại sự chuyển đổi màu sắc sinh động, đặc biệt có thể nhấp nháy theo nhạc thông qua ứng dụng. THÔNG SỐ KỸ THUẬT CHÍNH: Màu chính: RGB (Đỏ - xanh lá - Xanh dương - Vàng - Trắng) Chiều dài: 3 mét và 5 mét (tùy chọn) Nguồn: cổng USB Điều khiển từ xa: sử dụng app trên smartphone kết nối qua bluetooth. LED: SMD 5050 RGB Mật độ đèn LED: 30 LED/m Điện áp đầu vào: DC5V Công suất 14.4 W/m Tuổi thọ: 50,000 giờ LƯU Ý SỬ DỤNG: - Kết nối giắc cắm đúng chiều mũi tên, nếu không đèn sẽ không sáng. - Tải và cài đặt ứng dụng dễ dàng theo hướng dẫn kèm theo hoặc quét QR code trên hình BỘ SẢN PHẨM GỒM: - Cuộn dây đèn led x 01 - Cáp USB tích hợp controller Bluetooth x 01 - Túi nylon chống ẩm đựng. -------------------- LƯU Ý: - Hình ảnh và mô tả đảm bảo đúng với sản phẩm thật. - Freeship theo chính sách Freship Extra của shopee. - Ở TPHCM quý khách có thể chọn Grab hoặc Nowship để nhận hàng trong vòng 3 tiếng. -------------------- #đènled5050 #đèn_led_5050 #denled5050 #den_led_5050 #đènled5050rgb #đèn_led_5050rgb #denled5050rgb #den_led_5050rgb #đènled5050rgb5m #đèn_led_5050rgb_5m #denled5050rgb5m #den_led_5050rgb_5m #đènled50505v #đèn_led_5050_5v #denled50505v #den_led_5050_5v #đènledbluetooth #đèn_led_bluetooth #denledbluetooth #den_led_bluetooth #đènledbluetoothrgb #đèn_led_bluetooth_rgb #denledbluetoothrgb #den_led_bluetooth_rgb #cuộnđènled #cuộn_đèn_led #cuondenled #cuon_den_led #cuộnđènledtrangtrí #cuộn_đèn_led_trang_trí #cuondenledtrangtri #cuon_den_led_trang_tri #cuộnđènledrgb #cuộn_đèn_led_rgb #cuondenledrgb #cuon_den_led_rgb #cuộnđènleddán #cuộn_đèn_led_dán #cuondenleddan #cuon_den_led_dan #cuộnđènlednhiềumàu #cuộn_đèn_led_nhiều_màu #cuondenlednhieumau #cuon_den_led_nhieu_mau #cuộnđènledđổimàu #cuộn_đèn_led_đổi_màu #cuondenleddoimau #cuon_den_led_doi_mau #cuộnđènleddâydán5m #cuộn_đèn_led_dây_dán_5m #cuondenleddaydan5m #cuon_den_led_day_d

Welcome to my shop, wish you have a happy day!!! [shengfeia]1PCS KY-016 RGB LED Module 3 Color Light For Arduino MCU AVR PIC Raspberry Features: RGB LED module made from a plugin full-color LED, through the R, G, B three pin PWM voltage input can adjust the three primary colors (red/blue/green) strength so as to realize full color melange effect.With the Arduno module can realize the control of cool lighting effects. -The use of plug-in full-color LED -The RGB tricolor current-limiting resistance to prevent burn out -is obtained by PWM adjusting three primary colors can mix different colors -With a variety of single chip microcomputer interface -Working voltage: 5 v Specifications: -The PCB size: 15 mm * 10.6 mm -PCB color: green -USES 5050 full-color super bright LED -To prevent burn resistor LED -Can meet all kinds of single chip microcomputer -High light LED -Working voltage: 3.3 V / 5 V -Can be used directly plugged into the motherboard Arduno, without dupont lines to connect Quantity:1PC Package Include:1PC*Sensor Module Note: 1.Please allow 0.1-0.3cm differences due to manual measurement, thanks. -Please understand because of the light irradiation or computer display difference, so I can't guarantee photos and real color is 100% the

[Mẫu mới nhất trong năm 2021 của thương hiệu VIJIM] 💡Thông số kỹ thuật sản phẩm ✔️Thương hiệu: VIJIM ✔️Model: R70 RGB ✔️Dung lượng pin: 5000Mah ✔️Màu sắc hiển thị chuẩn CRI 95+ ✔️Kiểm soát nhiệt độ thông minh bảo vệ hệ thống (bất ngờ cao bảo vệ nhiệt độ) ✔️Omnidirectional hỗ trợ hệ thống/360 độ hỗ trợ giá đỡ 💡Ưu điểm nổi bật và ứng dụng R70 RGB Light ✔️20 hiệu ứng lighting độc đáo, đa dụng như giả ánh đèn chớp tắt, đèn xe cảnh sát, xe cứu thương, đèn bar... ✔️Pin tới 5000mAh cho thời gian dùng từ 2.5 đến 8h ( hỗ trợ sạc nhanh PD, sặc full mất tầm 2h) ✔️Với thiết kế kim loại nhỏ gọn cầm vừa tay, có nam châm hít lên bề mặt kim loại khác, có phần mount gắn lên tripod ốc 1/4 dể dàng xoay chuyển 360 độ các hướng. ✔️Phù hợp bạn chuyên về chụp model, sản phẩm , quay phim, vlog, đèn background, hiệu ứng và bạn làm makeup, du lịch ... ✔️Thiết lập ánh sáng phức tạp hơn với 360 màu RGB, khả năng điều chỉnh độ sáng 1-100% 💡Bộ sản phẩm bao gồm ✔️1 x R70 video ✔️1 x Đầu nối 1/4 ✔️1 x Cờ Lê ✔️1 x Type-C Cáp sạc ✔️1 x Hướng Dẫn Sử Dụng (Tiếng Anh) * Lưu ý: Sản phẩm chỉ bảo gồm 1 x Đèn Led VIJIM R70, các sản phẩm khác chỉ là hình ảnh minh họa cho sản phẩm như Tripod hoặc Phôn

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If the goods are defective or not of the size, please contact us for a chat. please don't rush to give us an assessment. if there are problems, we 'll definitely solve them positively. we hope that the good service will allow you to buy back. - when purchasing goods, please consult and confirm them in advance to ensure that the goods are purchased correctly. if you do not ask the person who is in need of goods directly, you will be held personally responsible if you agree to wait, cancel and refuse to pick them up!!Please respect each other and don't cause unpleasantness on both sides. thank you! - the museum's goods are filmed for the actual beautification of the goods. if there is a more or less real error with the physical objects, one cut of the goods shall be based on the actual goods. - all the goods of this store are small-scale operation, shipping overseas, exchange cost is higher, non-quality issues are not easy to return, please make sure to bid! - like our products to five stars praise, the trade is mutual, you give us the same evaluation we give you! Thank you! Led single white constant light 12v big 4pi

#120/140mm #RGB #Colorful #LED #Fan #Halo #Aperture #for #Synchronous #Motherboard #Control Description: 100% brand new and high quality Feature: High and stable performance, it can be installed on the different fans. Ultra-thin design, comes with the +5V 3Pin colorful connector. It can help to support chassis light synchronization. 120mm/140mm RGB Colorful LED Rainbow color fan optional. Easy and simple to install and remove, no other tools needed. Support using 3 pin 5v AURA Cable Connect to Motherboard (MSI,AS-US ASROCK ) to realize the light control. Specifications: Item Type: LED Rainbow Color Fan Material: ABS Size: A: 120x120mm/4.7x4.7in, B: 140x140mm/5.5x5.5in Color: As shown Optional Type: A, B Voltage: 5V Quantity: 1 PC Note: Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x LED Rainbow Colo

Thông tin sản phẩm: -Bộ dây led RGB 5050 kèm điều khiển 44 phím -Dây led dán trang trí nhà, bàn PC, dán sau màn hình TV và màn hình máy tính -Dây Led chống nước IP65 cho tuổi thọ của dây led được lâu hơn -Phím điều khiển 44 phím cho ra nhiều chế độ led đẹp mắt -Dùng nguồn điện 12v Sản Phẩm bao gồm: 1 cuộn dây led 5mét 1 Adapter 12v 1 Hub 1 Remote điều khiển Sản phẩm được bảo hành 6 tháng tại Shop #led #ledrgb #led44phim #leddanmanhinh #ledtrangtri #dayled #dayled