Countersink drill

Four piece set includes bits for drilling pilot holes for screw sizes 3mm, 4mm, 5mm, 6mm. Adjustable counter sleeve depth with wrench. Drill and countersink for wood screws without changing bits. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Chamfer is 5 flutes, in the process of using, can discharge the wood more rapid, sink hole disposable drilled smooth, screw cap perfect embedded in the surface of workpiece. Specifications: Material: HSS Drill 4241 Black chamfer drill body material: steel #45 Diameter of Chamfer: 15.8mm Size: 3mm x 60mm(L)/ 4mm x 75mm(L)/ 5mm x 85mm(L)/ 6mm x 93

Features: *100% brand new and high quality. *Made of high-quality materials, durable and practical. *It is possible to more easily drop the processed debris during the chamfering process without delaying the work efficiency due to tool clogging. *Suitable for workpieces with hardness below 25HRC, such as carbon steel, thin iron plate, insulation board, PVC board, wood board, etc. *The blade can be ground: a more convenient maintenance method allows the tool to be ground without unloading. *Automatic through- hole chamfering cutters can quickly chamfer the two sides of the hole in a few seconds. *The processing of the taper can be done in one operation. Suitable for small cutting volume machining. Specifications: *Materials: High speed steel 4241 *Flute: 3 *Angle: 90° *Size: As picture show *Quantity: 6pcs *Optional packaging: With Box / Without Box Package Contents: 6*Tapered Drills Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. #3Flute  #6.3-20.5mm  #6Pcs  #90Degree  #ChamferingEndMillCutter  #CountersinkDeburringTaperedDrillBit  #HSS  #RoundShank  #2021New  #Best  #Cheap  #HighQuality  #HotSale  #OnSale  #Top-quality &

Four piece set includes bits for drilling pilot holes for screw sizes 3mm, 4mm, 5mm, 6mm. Special designed steel counter sleeve countersinks or counter bores pilot hole. Adjustable counter sleeve depth with wrench. Drill and countersink for wood screws without changing bits. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Chamfer is 5 flutes,In the process of using, can discharge the wood more rapid, sink hole disposable drilled smooth, screw cap perfect embedded in the surface of workpiece. Specifications Color:Sier and black Material: HSS Drill 4241 Black chamfer drill body material: steel #45 Dimension: 3mm x 60mm(L) 4mm x 75mm(L) 5mm x 85mm(L) 6mm x 93mm(L) Dia. of Chamfer: 15.8mm Shank: 1/4 hex shank. Package include:4 x Woodworking chamfer 1 x Hex Shank Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-

Description: Machined from high carbon steel and are available in 6 different diameter sizes. size - 6mm(1/4''), 8mm(5/16''), 9mm(3/8''), 12mm(1/2''), 16mm(5/8''), 19mm(3/4'') 90° angle on the point for sharp and precise countersinking. a chatter-free, five-flute designed with staggered cutting teeth aranged to insure free chip flow and chatter free cutting.reduces vibration for smoother drilling Perfect for wood openings, reams, chamfers, screw heads, etc. suitable for chamfering of various soft materials such as wood board, aluminum board, plywood, plastic, PVC board, etc. 1/4″ hex shank countersinks are fine for a quick drill. they don't slip in drill chucks. Great for sinking 90 degree holes into wood and soft metals countersunk screws and fixings.suitable for diy, home and general building/engineering using. Size Chart: Length: 5cm / 1.97inch. Package Includes: 6 Pieces Drill Bit. Note: Color might be slightly different due to the color calibration of each individual monitor. Please allow slightly measuring deviation due to manual measure

Description Item type: bit Shank diameter available: 8mm(25#,35#),10mm(45#) will be picked random Main material: Diamond sand and metal bond Diamond sand processing tech: Electroplated Packing list: 1 x bit Notes: 1-2cm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor sett

Features: *100% brand new and high quality *Made of high-quality materials, strong and practical *Specially designed steel counterbore or counterbore guide hole. *The depth of the counter bushing can be adjusted using an Allen wrench. *The standard hexagon handle can be replaced quickly. *Drills and countersunk heads are used for wood screws, no need to replace the drill bit. *Just loosen and tighten the fixing screws, you can adjust the drilling length of screws of various lengths. Specifications: *Material: Head: YG8 alloy blade Body: 45# carbon steel Surface: spray *Color: As Pictures Show *Size: As Pictures Show *Specifications: 2.8mm*10mm, 3mm*10mm, 3.2mm*10mm, 3.5mm*10mm, 4mm*10mm(Approx.) *Usage: used for countersinking and opening of wood and aluminum alloy screws Package Contents: Package1:1* countersink drill Package2:5* countersink drills Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. #CountersinkDrill  #Aluminumalloyscrews  #DrillBit  #Forwood  #Hexagonshank  #Holeopener  #Woodworking  #Durable  #Highquality  #Practical  #Useful &

Description Item type: bit Shank diameter available: 8mm(25#,35#),10mm(45#) will be picked random Main material: Diamond sand and metal bond Diamond sand processing tech: Electroplated Packing list: 1 x bit Notes: 1-2cm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor sett

Welcome to 【maudlatombn.vn Store】 ,We insist on the lowest price to sell the best quality items！！！Features: 100% Brand New and High Quality Cut quickly and easily in wood, soft metal, rubber,plastic and other machinable materials. For carpentry, locksmiths, automotive, metal working perfectly centered holes every time properly seated screw heads. ideal for chamfering,and countersinking. Material: High Carbon Steel Color: As shown in the pictures Shank diameter: 6.35mm 10# : 48mm length 13#: 50mm length Package included: 2pc x Chamfer Cu

Welcome To Xinghergood HSS Timber Woodworking Ti Countersink Drill Bit Set Screw Cutter Wood Tool For Metal Wood Alloy Counterbore Drilling Tool Countersink Drill Bit Set Made of high quality of alloy steel.It is very suitable for using to multi size wood hole drilling. One tool for multi uses,improve working efficiency. Product Feature MaterialAlloy steel coating,high strength, high toughness,to reduce friction, long life. DesignThis is a premium design that fully sharpened edge, sharp and durable,quick opening, easy to use,first-order length can be adjustable. Widely UsedSuitable for DIY, home and general building or engineering using,etc. Product Specification Size:2.8x8mm, 2.8x10mm, 3x8mm, 3x10mm, 3.2x8mm, 3.2x10mm, 3.5x8mm Color: orange silver Package Include: 5PCS Precautions: 1. Check the integrity of the hole opener before use, and clamp the hole inserter when loading the drill. 2. When working, the hole opener should be perpendicular to the workpiece. 3. After positioning, the propulsion force is slightly given during the drilling process. 4. When drilling, the rotation speed should not be too low, avoiding the blade being stuck and causing chipping. 5. Coolant should be added during the opening process to prevent damage caused by excessive tempera

Description: Suitable for hardness lower material, such as wood For use with Cordless drills , regular drills, drill presses, or low rpm rotary tools Great for making countersink holes for counter sunken screw heads as well as counterbored holes for plugs Can be combined with bench drill, to countersunk and inverted tapers of wood, plastics, aluminium alloys, etc Material: Bearing Steel Specification: Quantiy: 1 Set of 3 Pieces 5/64-15/64(1.98mm-5.95mm), 1/8-11/32(3.175mm-8.73mm), 3/16-17/32(4.76mm-13.5mm) Size: Approx. 20x15x15mm/ 0.79x0.59x0.59inch Package Includes: 3 Pieces of Countersink Drill Bit Note: As different computers display colors differently, the color of the actual item may vary slightly from the above images. There is 2-3% difference according to manual measurement. Please check the measurement chart carefully before you buy the i

Specification: *100% brand new and high quality *Material: HSS *Size: 1/8", 3/16", 1/4", 5/16", 5/32" *Color: Silver (As Pictures Show) *Quantity: 5pcs *60° tip angles *Applicable hardness: HRC40 or less *Use: suitable for positioning and Chamfering processing before drilling *General Materials centering hole machining and chamfering machining. Using high speed steel material *Cutting fast, good chip evacuation, edge clear, sharp and durable, the drill shank has a specification lettering.(Without protecting chamfers composite center drill) Package Contents: 5*Center Drill Bits Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. #CenterDrillBit  #1/4"  #1/8"  #3/16"  #5/16"  #5/32"  #5pcs  #60°CenterSpottingDrill  #Bit  #Combined  #CountersinkBits  #HSS  #Set  #Accessories  #Hot  #New  #Professional &

Features: *100% brand new and high quality. *Made of high-quality materials, durable. *The drill bit is made of heat-treated and tempered titanium alloy-coated high-speed steel, which has excellent cutting force and durability, and its accuracy is higher than that of ordinary drill bits. *The countersunk bit has an automatic starting point, and the five-slot design eliminates chatter and vibration, and makes the operation smooth, thereby achieving clean, accurate and burr-free cutting. *You can drill the screw hole and the counter bore for the screw cap at the same time and keep the two on the same axis.After the screw is screwed, the screw cap is located below the plane of the board. *The standard 1/4 inch hex handle can be quickly change, and the depth of the secondary sleeve can be adjusted by an Allen key for grub screw heads or deeper covers to cover the matching plug. *Suitable for work pieces with hardness below 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc. Specifications: *Material: High Speed Steel *Color: As picture show *Countersunk Drills Size: 5#, 6#, 8#, 10#, 12# *Countersunk Drill diameter: 1.98mm (approx),5/64" drill bit, 3/8" countersink for screw sizes: #5 2.38mm (approx),3/32" drill bit, 3/8" countersink for screw sizes: #6 2.78mm (approx),7/64" drill bit, 3/8" countersink for screw sizes: #8 3.175mm (approx),1/8" drill bit, 3/8" countersink for screw sizes: #10 3.56mm (approx),9/16" drill bit, 1/2" countersink for screw sizes: #12 *Chamfered Plug Cutters Size: 10mm,14mm,17mm,20mm (As picture show) *Plug Cutters Size:12mm,14mm,19mm,22mm (As picture show) *Quantity: 10pcs Package Contents: Package 1#: 5*Countersunk drills 1*Hex wrench 4*Plug Cutters Package 2#: 5*Countersunk drills 1*Hex wrench 4*Chamfered Plug Cutters Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. #CountersinkDrillBit  #10pcs/set  #CountersinkDrillBits  #ForWoodworking  #HSS  #HexWrench  #Kit  #Pack  #Set  #Tool  #Tools  #WoodPlugHoleCutter  #Woodwork  #Durable  #New  #Practical  #Professional &

Four piece set includes bits for drilling pilot holes for screw sizes #6,#8,#10 and #12. Special designed steel counter sleeve countersinks or counter bores pilot hole. Adjustable counter sleeve depth with Hex Wrench. Standard hex shank is quick change compatible. Drill and countersink for wood screws without changing bits. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Color : As shown Material : HSS Drill 4241 Black chamfer drill body material : steel 45 Dimension : 6# 2.38mm (0.0937 inch) x 55mm(L) 8# 2.78mm (0.1094 inch) x 60mm(L) 10# 3.175mm (0.125 inch) x 63mm(L) 12# 3.56mm (0.14 inch) x 65mm(L) Shank : 1/4 hex shank. Package includes : 4 x Countersink Drill Bits 1 x Hex Shank Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-

HSS Timber Woodworking Ti Countersink Drill Bit Set Screw Cutter Wood Tool For Metal Wood Alloy Counterbore Drilling Tool Countersink Drill Bit Set Made of high quality of alloy steel.It is very suitable for using to multi size wood hole drilling. One tool for multi uses,improve working efficiency. Product Feature MaterialAlloy steel coating,high strength, high toughness,to reduce friction, long life. DesignThis is a premium design that fully sharpened edge, sharp and durable,quick opening, easy to use,first-order length can be adjustable. Widely UsedSuitable for DIY, home and general building or engineering using,etc. Product Specification Size:2.8x8mm, 2.8x10mm, 3x8mm, 3x10mm, 3.2x8mm, 3.2x10mm, 3.5x8mm Color: orange silver Package Include: 5PCS Precautions: 1. Check the integrity of the hole opener before use, and clamp the hole inserter when loading the drill. 2. When working, the hole opener should be perpendicular to the workpiece. 3. After positioning, the propulsion force is slightly given during the drilling process. 4. When drilling, the rotation speed should not be too low, avoiding the blade being stuck and causing chipping. 5. Coolant should be added during the opening process to prevent damage caused by excessive tempera

Features: Five piece set includes bits for drilling pilot holes for screw sizes #6,#8,#10 and #12. Special designed steel counter sleeve countersinks or counter bores pilot hole. Adjustable counter sleeve depth with a wrench. Drill and countersink for wood screws without changing bits. Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew. Countersink or counter bore clean, smooth holes for screws and fasteners For use in wood and plastic Includes countersink sizes: #6, #8, #10 #12 #14 Shank: Round shank. Material: HSS 4241( Ti Titanium-coated) Black chamfer drill body material is #45 steel. Color:As the pictures show Size: Chamfer Drill 6# 2.38mm 8# 2.78mm 10# 3.175mm 12# 3.56mm 14# 3.97mm Package included: 5pcs Woodworking drill countersink 1pc wrench #Tool #Woodworking #drill #countersink #Drill #Bit #Sets #Round #shank #5 #PCS #SET #Hand #Tools #Counter #Bore #Scr

Description: Five piece set includes bits for drilling pilot holes for screw sizes The applicable scope is suitable for workpiece under 25 HRC hardness, such as carbon steel, sheet iron, insulation board, PVC board, wood, etc. Adjustable counter sleeve depth with Allen wrench,drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew 5 Sizes in one drill bit set which meet your different needs perfectly. Standard hex shank is quick change compatible,drill and countersink for wood screws without changing bits. Specification: Material : Steel Color: Black Size: Approx. 2.38mm/0.09inch; 2.78mm/0.1inch; 3.18mm/0.13inch; 3.56mm/0.14inch ; 3.97mm/0.16inch Package Includes: 5 pieces Countersink Drill Note: Due to the difference in the measurement , pls allow an error of 1 to 3

Features： 100% brand new and high quality Six Flute Bevel Countersunk Debur 1/4 "Hex. Great for sinking 90 Degree holes in wood and soft metals in preperation of countersunk screws. Heat treatment carbon steel blades ensure a good tool life. Cut quickly and easily on wood, soft metal, rubber, plastic and other machinable materials. Perfectly centered holes each time the screw heads are properly seated. Function: mostly used for workpiece removal burr and wood board plastic plate opening. Material: 45 # Steel Length: 36mm / 1.42 inch Diameter: 13mm / 0.51 inch Shank Diameter: 6.35mm / 0.26 inch Color:Grey The package includes:5pcs/set note: 1. Please allow 0-1cm error due to manual measurement. Pls make sure you don't mind before you bid. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank

Feature: *100% brand new and high quality *60 degrees center drill countersinks. *High strength and hardness. *Easy to use. *Durable in use. *Used for producing center holes in components or workpieces which requires machining between centers Specification: *Material: high speed steel *Color: Silver (As Pictures Show) *Full Length: approx. 45mm / 1.8 inch *Body Diameter: approx. 6mm / 0.2 inch *Bit Diameter: approx. 2.5mm / 0.1 inch *Quantity: 10pcs Package Contents: 10*Center Drill Bits Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data. #DrillBit  #10pcs  #2.5mm  #60Degree  #Bits  #Center  #Combined  #Countersink  #HSS  #Spotting  #Brandnew  #Durable  #Highquality  #Practical  #Premium  #Useful &

Details: *100% brand new and high quality *Shank Type: Round Handle *Color: As Pictures Show *Drill Length: 5-25mm adjustable *Smooth with recess drilled in a moment to save you time and labor. The surface of the workpiece will be seamlessly integrated with screw cap *For use on wooden and plastic doors *Counterbore Taper: 90° *Handle Diameter (mm): 8mm *Material: Carbide *Cooling Type: External Cooling *Vertical to prevent the drill from bending or breaking *Compatible with drilling machines with chuck, for drilling in wood or wood flooring. It is recommended to use the center punch to position before drilling, keep the drill bit *Optional Size: 2.8*8mm / 2.8*10mm (Approx.) Package Contents: 1 * Countersink Drill Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. #CountersinkDrill  #Bit  #Carbide  #Carpentry  #Chamfering  #Cone  #Doors  #Drilling  #Hole  #Plastic  #Repair  #Screws  #Tip  #Tools  #Woodworking  #Convenient  #Durable  #Useful &

3 pcs Titanium Step Drill Bit Set & 3 Pcs 5 Flute Countersink Drill Bit Set in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet metal 135 Degree SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking TWO-FLUTE DESIGN: clears chips faster and allows particles to escape easily T4.RI-FLATTED SHANK: fits into power tools chuck securely and eliminates slip.Two-flute design for faster, smoother cutting. British ladder drill: colour: Gold & Material: High Speed Steel + Titanium size: 1 / 4-3 / 4: 74x9mm 1 / 8-1 / 2: 77x6mm 1 / 2-3 / 16: 60x6mm Countersink Drill Bit: Great for sinking 90 Degree holes into wood and soft metals in preperation of countersunk screws and fixings. Set features all commonly used sizes including 12mm, 16mm & 19mm all with 1/4 inch hex quick change shanks to facilitate fast changing with a 1/4 inch quick chuck system. Heat treated carbon steel blades ensure good tool life. Suitable for all woods and soft metals Diameter: 12mm, 16mm, 19mm / 0.47 inch, 0.62 inch,0.74 inch Length: 6.35mm (1/4 inch) color:black Material: steel Package included: 3 X British ladder drill 1 set x Countersink Drill BitOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Item Details: *6Pcs 1/4 6mm-19mm Hex Shank Drill Bit *Great for DIY, home and general construction / engineering *100% brand new and high quality *Solid and durable, long service life *Material: High Speed Steel *6 Types: 6mm, 8mm, 9mm, 12mm, 16mm, 19mm *Application: Suitable for wood, fiberboard, particleboard, plywood, plastic, aluminum, etc. *Color: As Pictures Show Package Contents: 6*Drill Bits Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data. #DrillBits  #5Flute  #6Pcs  #6mm-19mm  #Accessories  #Countersink  #DIY  #G0V3B4U5  #Hex  #HighSpeedSteel  #Shank  #Woodworking  #Convenient  #Durable  #Useful &

Specification: 6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits 7pcs Three Pointed High Speed Steel Countersink Drill Bit with 1 pc L-wrench 8pcs 3/8" shank wood plug cutters set 1pc Automatic center punch 7pcs 3- Pointed Countersink Drill Bit: - Made of high carbon steel with hiigh hardness and wear resistance, - Includes 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm - For drilling pilot holes,the drill bit large chip flute and five edge chamfers allows faster and easier discharge of sawdust. With the L-shape hex key provided, you could easily remove five bevel chamfer or adjust counter sleeve depth and drilling depth. 8pcs 3/8" Shank Wood Plug Cutter Drill Bit: - Made of high carbon steel, - Used for tapered 1/4" ,3/8" ,1/2" ,5/8" wood plugs to cover recessed screw holes or hide blemishes,able to cut plugs to 22mm/23mm/25mm/26mm in length. 6pcs 1/4" hex shank 5 flute countersink drill bit: - Made of high speed steels. - There are 6 different sizes in diameter: 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4") . - Great for Sinking 90 Degree Holes into Wood and Soft Metals Countersunk Screws and Fixings.Suitable for DIY, Home and General Building/Engineering Using Package Contents: 23 * Chamferdrill bits #23x  #Bits  #Chamfer  #Countersink  #Cut  #Drill  #Drilling  #Plug  #Set  #Tool  #Wood  #Woodworking  #FREEPOST  #GreatPrice&Quality  #Parts  #Replacement  #Tools  #2021ER &

HSS Timber Woodworking Ti Countersink Drill Bit Set Screw Cutter Wood Tool For Metal Wood Alloy Counterbore Drilling Tool Countersink Drill Bit Set Made of high quality of alloy steel.It is very suitable for using to multi size wood hole drilling. One tool for multi uses,improve working efficiency. Product Feature MaterialAlloy steel coating,high strength, high toughness,to reduce friction, long life. DesignThis is a premium design that fully sharpened edge, sharp and durable,quick opening, easy to use,first-order length can be adjustable. Widely UsedSuitable for DIY, home and general building or engineering using,etc. Product Specification Size:2.8x8mm, 2.8x10mm, 3x8mm, 3x10mm, 3.2x8mm, 3.2x10mm, 3.5x8mm Color: orange silver Package Include: 5PCS Precautions: 1. Check the integrity of the hole opener before use, and clamp the hole inserter when loading the drill. 2. When working, the hole opener should be perpendicular to the workpiece. 3. After positioning, the propulsion force is slightly given during the drilling process. 4. When drilling, the rotation speed should not be too low, avoiding the blade being stuck and causing chipping. 5. Coolant should be added during the opening process to prevent damage caused by excessive tempera

Description 100% brand new and of high quality Made of premium carbon steel and high speed steel, sturdy, durable use. Universal hex shank, tight clamping, non-slip, quick change. Drilling length can be adjusted for various length screws simply by loosening and tightening the set screw. Suitable for use on thin stainless steel, aluminum alloy, wood, etc. Specifications: Color: black Material: carbon steel(handle), high speed steel(drill bit) Length: about 77mm, 87mm, 96mm, 115mm, 121mm Handle bottom width: about 6.35mm Drill bit width: about 2mm, 3.2mm, 4mm, 5mm, 6mm Weight: about 12g, 20g, 22g, 32g, 35g Use for: thin stainless steel, aluminum alloy, wood Package include: 5pcs/set of drill bits Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow slight deviation for the measurement data and make sure you do not mind before ordering. High quality store for you! #Drill #Bit #Set #Quick #Change #Countersink #Hex #Shank #Carpentry #Woodworking #High #Speed #Steel #Non-Slip #Powerful #S

Features Color:Silver Size: Style 1 Length 6.5-9cm Diameter 1-1.5cm Style 2 Length 4.5-6.5cm diameter 1-1.5cm Material:High speed steel Package Content: 4 pcs/set Warm Tips: 1. Conversion: 1 Inch=2.54CM; 2. Color may little vary due to different display setting; 3. Size might be slightly deviation due to hand measurement, please allow 1-2 cm differ

Features: Easy and convenient to use Comes with Case and Allen wrench This kit is perfect for all the popular wood screw sizes Taper drills have more gripping power than standard drills High speed heat treated steel, single twist design for smooth drilling Pre-drills for wood screws and makes pilot holes with perfect tapers every time On the same axis, after screwing the screw cap below the plane of the board, the drill ring can be adjusted up and down. Suitable for drilling machines with chucks or joints for drilling holes in hard wood and wood, machine screws. Specifications: Color: Black Material: Steel Bit sizes: 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", Made for Screw sizes: No. 5, No. 6, No. 7, No. 8, No. 9, No. 10, No. 12, Package includes: 1X Countersink Bi

Features: 100% brand new and high quality Six Flute Bevel Countersunk Debur 1/4 inch Hex. Great for sinking 90 Degree holes in wood and soft metals in preperation of countersunk screws. Heat treatment carbon steel blades ensure a good tool life. Cut quickly and easily on wood, soft metal, rubber, plastic and other machinable materials. Perfectly centered holes each time the screw heads are properly seated. Function: mostly used for workpiece removal burr and wood board plastic plate opening Product description Color:Sier Product name: Drill Bit Length: 36mm / 1.42 inch Diameter: 13mm / 0.51 inch Shank Diameter: 6.35mm / 0.26 inch Product Material: Steel Package Contents: 10pc 6 Flute Countersink Drill BitOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Quality material: countersink drill bits are made of quality High-carbon steel, the surface of the countersunk drill bits is plated with titanium to prevent rust, they has a nice appearance and a strong surface; It is durable for you to use and can serve you for a long time Practical design: 1/4 inches hex shank counter sinker drill bits are suitable for quick replacement and suitable for most power tools, the cutting edge is hardened and ed to improve sharpness, all drill bits have a 90 degree angle at this point, allowing peaked and precise counter sinking Automatic center punch: automatic center punch is so effective that you are able to mark workpiece with a dimple to prevent screws and drills from wandering, helping you complete work accurately and quickly, save your time and energy Wide usages: very suitable for wood drilling, reaming, chamfering, screw heads, etc., suitable for chamfering various soft materials such as wood, plywood, aluminum, fiberboard, particle board, plastic, PVC board and other various soft material chamfers Package includes: there are 12 pieces of 5 flute countersink drill bits and 1 piece of center punch in the package, in addition, the measurements of countersink drill bits respectively are 2 x 6 mm (1/4 inches), 2 x 8 mm (5/16 inches), 2 x 9 mm (3/8 inches), 2 x 12 mm (1/2 inches), 2 x 16 mm (5/8 inches), 2 x 19 mm (3/4 inches); Sufficient quantity is enough to meet your various needs, and you are able to share with your friends who need these home improvement accessories Colour:Golden Material:High-carbon steel Package Contents: 12 x Countersink drill bits 1 x Automatic center punchOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#6pcs #1/4" #Hexagonal #Shank #Titanium #Coated #5 #Flutes #HSS #Countersink #Chamfer #Drill #Bit #with #Center 6pcs 1/4" Hexagonal Shank Titanium Coated 5 Flutes HSS Countersink Chamfer Drill Bit with Center Hole Punch 100% brand new and high quality Feature: 1/4" hexagonal shank fits most handheld and stationary drills. Five flutes design reduces vibration for smoother drilling and extended life. Sharp and smooth cutting edge, high working efficiency. Titanium plating finish for added corrosion resistance. Precision ground 90 degree tip for countersinking most machinable metals like aluminum, woods, rubber and plastic. Specification: Material: High Speed Steel (HSS) Chamfer Degree: 90° Shank Size: 6.35mm / 1/4 inch Diameter: 6mm/0.2" , 8mm/0.3", 9mm/0.35", 12mm/0.47", 16mm/0.63", 19mm/0.75" Total Length: 48mm / 1.88 inch Color: As pictures shown Quantity: 1 Set Note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 6 x Chamfer Router Bit 1 x Center Punch (other accessories demo in the picture is not inclu

Description: Suitable for hardness lower material, such as wood For use with Cordless drills , regular drills, drill presses, or low rpm rotary tools Great for making countersink holes for counter sunken screw heads as well as counterbored holes for plugs Can be combined with bench drill, to countersunk and inverted tapers of wood, plastics, aluminium alloys, etc Material: Bearing Steel Specification: Quantiy: 1 Set of 3 Pieces 5/64-15/64(1.98mm-5.95mm), 1/8-11/32(3.175mm-8.73mm), 3/16-17/32(4.76mm-13.5mm) Size: Approx. 20x15x15mm/ 0.79x0.59x0.59inch Package Includes: 3 Pieces of Countersink Drill Bit Note: As different computers display colors differently, the color of the actual item may vary slightly from the above images. There is 2-3% difference according to manual measurement. Please check the measurement chart carefully before you buy the i