Card pcie to

Xin chào, chào mừng bạn đến với zeblonstar.vn PCI Express 3.0 x4 Lane Host adapter.Compliant with m.2 NGFF NVMe SSD of PCI-E protocol. Support M-key XP941 SM951 PM951 A110 m6e SSD, no applicable B key m.2 NGFF NVMe SSD. Easy to put M-Key m.2 NGFF NVMe SSD (PCI-E standard) in PC.With work indicator light. M.2 NGFF to PCI-E X4 transfer card, there are 4 fixed holes on the board, 22*32 mm, 22*42 mm, 22*60 mm, 22*80 mm, respectively. It supports M.2 for PM961, 960EVO, SM961, PM951, sm951, INTEL 600P, LITE-ON T10 and other NVME protocols. Note: The M.2 of the SATA protocol is not supported. Product Specification: Type：PCI Express 3.0 X4 adapter Compliant with：m.2 size: 2230 2242 2260 2280 Interface：PCIE X4 X8 X16 Support System: windows, linux mac os Package Includes: 1 x Converter Card 1 x 4U/2U Chassis Backplane Br

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Hướng dẫn lắp: 1: Vui lòng làm sạch card SATA3.0 bằng cục tẩy, cắm cáp SATA của thùng máy vào card. Sau đó kết nối tất cả các ổ cứng. 2: Tắt nguồn máy tính và mở mặt sau vỏ PC ra; Tháo các thanh tương ứng với khe trống trên khung máy. 3: Cắm thẻ mở rộng vào khe cắm mở rộng PCI-E tương ứng của máy chủ 4: Giữ chặt dải sắt của card mở rộng vào khung máy bằng tuốc nơ vít. 5: Đóng khung máy và cắm dây nguồn để khởi động. Sau khi vào hệ thống, hãy cài đặt trình điều khiển Cài đặt trình điều khiển " Dành cho Windows XP / Vista / 7/8/10 (32/64 bit) " 1. Đưa đĩa CD đi kèm vào ổ đĩa CD; 2. Mở " Máy tính của tôi ", tìm vị trí của đĩa, mở đĩa; 3. Tìm " CD: / SATA CARD / Marvell / 9215 / drvsetup bên trong tệp trình điều khiển .exe; 4. Sau đó làm theo hướng dẫn của máy để hoàn tất cài đặt, sau đó khởi động lại máy Kiểm tra cài đặt: Phù hợp với thẻ PCI-E với Chipset Marvell 88SE9215 + JMicron JMB5xx: Mở " Device Manager ", mở rộng tùy chọn "Universal Serial Bus Controller ", nếu có " Marvell 92xx SATA 6G Controller " ", phần cứng và trình điều khiển đã được cài đặt thành công; nếu có " unknown device " hoặc thông tin khác, phần cứng hoặc Trình điều khiển đã không cài đặt thành công. Nếu có " Standard SATA AHCI Controller " thông tin phần cứng trong "Device Manager" hoặc bộ điều khiển IDE ATA / ATAPI, có nghĩa là trình điều khiển không được cài đặt trong Windows10 Chipset Marvell 88SE9215, Cổng: 8 Cổng SATA 6GB / s, Tương thích với PCI-E V2.0 và tương thích ngược với PCI-E 1.X, Hỗ trợ hàng đợi lệnh gốc (NCQ), Tương thích với ổ cứng SATA 6G, 3G và 1.5G, Tương thích với PCI-E v2.0 và tương thích ngược với PCI-E v1.x, Giao diện PCI Express x1 và Tương thích với PCI Express Khe cắm x1, x2, x4, x8 và x16 Bộ vi xử lý Marvell 88SE9215 + JMicron JMB5xx Hỗ trợ ổ đĩa cứng 10TB Bộ điều khiển SATA chuẩn không RAID Yêu cầu hệ thống: Windows 10 / 8.1 / 8/7 (32 / 64bit) / XP / Linux Giao diện: Giao diện PCI Express x1. Tương thích với Khe cắm PCI-E X1, X4, X8, X16 màu đen Chất liệu: Kim loại + pc Gói hàng bao gồm 1 Card mở rộng SATA 3.0 1 Khung cấu hình thấp 1 Trình điều khiển CD Chú ý Card SATA3.0 PCI-E phải được lắp vào khe PCI-E của bo mạch chủ và không thể lắp vào khe PCI. Tốc độ nhanh nhất là 380-450m / s trong PCI-E 2.0. Nếu được cắm vào PCI-E1.0, tốc độ chỉ chạy 200-300m / s. Các cấu hình máy tính khác nhau và sata ssd có tốc độ khác nhau. Nếu tất cả các cổng được sử dụng cùng một lúc, tốc độ sẽ chậm lại. Chúng tôi khuyên bạn nên sử dụng Thẻ SATA 3.0 này trong khe cắm PCIE2.0 hoặc 3.0 để có tốc độ nhanh nhất. SATA Port Multiplier không được hỗ trợ nếu trình điều khiển không được cài đặt. Chúng ta phải cài đặt trình điều khiển để nhận ra tất cả các đĩa cứng. Đảm bảo tắt nguồn máy tính trước khi lắp hoặc tháo thẻ rồi sau đó mới lắp thẻ để tránh làm hỏng bo mạch chủ hoặc thẻ mở

Giao diện đầu vào: M-Key M.2 NVME (Không hỗ trợ giao thức SATA m.2 NGFF ) Giao diện đầu ra: PCIE 16X 8X 4X PCI Express 3.0 x4 Lane Host adapter. Support M-key XP941 SM951 PM951 A110 m6e SSD, no applicable B key m.2 NGFF NVMe SSD Thiết bị hỗ trợ: Nhiều loại giao thức PCIE NVME m.2 SSD Hệ điều hành được hỗ trợ: Windows7 / 8/10 / Linux Màu sắc: Đen Chất liệu: Linh kiện điện tử + kim loại M.2 NGFF to PCI-E X4 transfer card, there are 4 fixed holes on the board, 22*32 mm, 22*42 mm, 22*60 mm, 22*80 mm, respectively. Kích thước: Khoảng 100*42mm Gói hàng bao gồm: 1 x NVMe M.2 to PCI-E3.0 X4 Riser Card Adapter 1 x Low Profile Bracket 2 x Ốc gắn bracket Gói hàng chỉ gồm các sản phẩm trên, không kèm sản phẩm khác. Lưu ý: Do điều kiện ánh sáng và chế độ cài đặt màn hình nên màu sắc thực tế của sản phẩm sẽ có đôi chút khác biệt với hình chụp. Vui lòng cho phép sai số +/- 1

Fully compliant with SATA revision 3, with standard 7 + 15 pin plug connector. Works with 50mm mSATA SSD. No loss on the mSATA SSD performance. 3.3 Volt Mini PCI-e SSD (mSATA ule) support. No driver installation required. Pin: 15 + 7 colour:green Material:PC+ metal Package Contents: 1*Adapter CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#Add #On #Card #M.2 #NVMe #SSD #NGFF #to #PCIE #X16 #Adapter #M #Key #Interface #Expansion Add On Card M.2 NVMe SSD NGFF to PCIE X16 Adapter M Key Interface Expansion Card 100% brand new and high quality Features: PCI Express 3.0 x16 Lane Host adapter. Made of premium material with fine workmanship. Easy to use and install. With work indicator light. Specification: Product name: PCIE NVME m.2 SSD To PCIE X16 Expansion Card Input interface: M-Key M.2 NVME ( Don't Support SATA Protocol m.2 NGFF) Output interface: PCIE X16 Support Slot: PCIE X16 Support Devices: Various PCIE Protocols NVME m.2 SSD Support system: Windows XP/7/8/10, Linux OS Mac Optional Styles: with/without Heating Panel Material: PCB Baffle Size: approx.120mm/4.72in Color: As pictures shown Quantity: 1 Pc or 1 Set Note: Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x Expansion Card or 1 x Expansion Card 1 x Heating

Adds 2 RS-232 serial port (Standard RS-232 DB9 male serial port compliant) through an available PCI Express Lane.Application area: Industrial computer, communication, LED control, POS machine display, engraving machine, cutting plotter, punch card machine, POS, access control attendance. WCH382L chipset, Connects more serial device to your computer easily. PCIe X1/X4/X8/X16 lane for installation, Rugular and low-profile bracket include for 4U/2U frame. Faster data rates up to 1.5Mbps for parallel port. Supporting SPP/PS2/EPP/ECP es and centronics interface. Compliant with Single-Lane (x1) PCI-Express specification revision 1.0a. Operating System: Windows 98/Me/NT4.0/2000/XP/Vista/Win7/Win8/Server2003/Server 2008/LINUX/DOS. Colour:green Material:plastic Package Contents: 1 * Pcie CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

This is a general-purpose PCIE serial port card, designed for POS, ATM and other applications, and can be used for industrial automation system manufacturing and system integration. PCE4SOP-A01 provides 4 RS-232 serial ports and em control signals to ensure the compatibility of serial port equipment peripherals. It is equipped with a 4-port RS-232 serial cable. You can connect a variety of serial devices such as PCs, terminals, ems, printers, scanners, etc. The data rate of each port can reach 115200kbps. PS: This product is a desktop PCI-E expansion card, which requires a free PCI-E slot on the motherboard to install and use. Also, make sure whether the slot is blocked by the image card, and the PCI slot cannot be installed and used. , Never plug it into a PCI slot. Specifications: Single-lane (X1) PCI Express End-point Controller with PHY integrated Compliant with PCI Express 2.0 Gen 1 Compliant with PCI Express card specifications Compliant with PCI Power Management 1.2 Supports four PCI Express functions Supports both legacy and MSI Interrupt Supports ASPM Power Management Serial Port Interface Dual or Quad UARTs Bi-directional speeds up to 25 Mbps per port Full Serial em Control Supports Hardware, Software Flow Control Supports 5, 6, 7, 8 and 9-bit Serial format Supports Even, Odd, None, Space and Mark parity Supports Custom baud rate by internal PLL or external clock Supports On Chip 256 Byte depth FIFOs in Transmit, Receive path of each Serial Port Supports remote wakeup and power management features Serial Port transceiver shutdown support Supports Slow IrDA e (up to 115200bps) on all Serial Ports Supports multi-drop application for 9-bit e Supports DMA burst transfer Driver installation instructions: Openthe supporting CD folder--/Serial-Parallel Card/AX99100 Material:PCB board + metal colour:Black Package Contents: 1 x R232 expansion card 1 x drive CD 1 x DB25 to 4 DB9 data cables Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. Wire advantages: high frequency support PCIe 3.0 X16 8G/bps stable transfer. 2.Cable length:25cm, our wire has a low impedance, 25cm cable can be stable at PCIe3.0 full speed reading and writing. 3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF Mini short circuit, cable is durability. 4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen. 5.Suitable graphics card: for GTX1080ti High-end graphics CARDS, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional graphics card, support for all the PCIe CARDS after 2015 years.Note: This product does not support external notebook graphics!Our all cables doesn't support the machine with 2x CPUs. Colour:black Material:PCB Size:Length: 25cm Package Contents: 1 * Extension CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Using a PCIe SATA card and 5 SATA cables, you can add 5 SATA 3.0 6Gbps / s devices to your computer. The 5-port SATA controller based on JMB585 main chip offers more stable and high performance, providing speed up to 1700 MB / s. Hot swappable, plug and play, no driver required, compatible with Windows 10/8/7 / Vista / XP, Mac OS 9/10 and Linux above. The PCIe to SATA III 5-port expansion card comes with a low profile bracket and 5 SATA cables to fit into PCIe X4 / X8 / X16 slots. [Note] -If your main board supports PCIe boot function, you can install OS on the disk connected to this PCIe SATA card. If your mainboard has RAID function, you can create RAID with this SATA card. WIN10 support software RAID 0/1.(Not support Boot as System Disk). Feature: Built-in JMB585 (PCIe Gen3x2 to SATA 6Gb / s x5) Controller: The data transmission speed of JMB585 reaches 1700MB / s. This is the maximum transfer rate for PCIe Gen3x2. This is the fastest data read / write transfer rate for multiple hard disk storage solutions in the field. Note: 1.To install OS disk, make sure the main board supports PCIe boot function 2.Not support boot as System Disk Color: black + red Material: electronic components Package Contents: 1 * PCIe 3.0 4x to 5-port SATA III expansion card 5 * SATA red cable 1 * Full profile bracket 1 * Low profile bracketOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1.This adapter card only supports the solid-state hard disk of PCIE X4 transport protocol in the M.2 NGFF interface (there is only one gap in the solid-state hard disk) and the solid-state hard disk of PCIE X2 transport protocol (this kind of solid-state hard disk has two interfaces, but the transport protocol is PCIE X2,Please be sure to distinguish between the two gaps also have SATA transport protocol, please be sure to consult your official solid-state hard disk customer service, understand the hard disk transmission protocol, buy the wrong is not used. 2.This transfer card converts the M.2 NGFF solid-state hard disk of PCIe X4 or PCIe X2 interface protocol into the PCIE X1 interface on the desktop motherboard. It is mainly used for batch test firmware upgrade of solid-state hard disk or emergency use when some motherboards have insufficient PCIe X4 interface.The SSD with this adapter card can't run at full speed! Insert the PCIE 3.0c slot of the motherboard as far as possible. If you insert the PCIE 2.0 or PCIE 1.0 slot, the speed is very slow! 3.This product is PCIE X4 3.0 or PCIE X8 3.0 or PCIE X16 3.0 slot inserted into the motherboard, that is, the graphics card slot of the motherboard, do not incorrectly insert the PCI slot, the slot may burn the motherboard, adapter card and your solid-state hard disk! 4.Windows 7 can't recognize NVME protocol solid-state hard disk! Include: 1 x NVMe PCIe M.2 NGFF SSD to PCIe x1 adapter card,1 x Half height bracket with screw

Description: This product is PCIE X4 3.0 or PCIE X8 3.0 or PCIE X16 3.0 slot inserted into the motherboard, that is, the graphics card slot of the motherboard, do not incorrectly insert the PCI slot, the slot may burn the motherboard, adapter card and your solid-state hard disk! Package includes: 1 x NVMe PCIe M.2 NGFF SSD to PCIe x4 adapter card 1 x Half height bracket with scr

Description: This 4-port USB PCI-E board supports USB 3.0 that can provide a fast data transmission speed, and it is powered by PCI-E interface, stable and secure. The PCI-E to USB extender card features a PCI-E X1 bus interface, you can connect it with 4x, 8x, 16x/graphic card interface The PCI-E to USB riser card features a simple installation and is designed with a LED indicator light, so you can easily know the work status. The PCI-E X1 to USB adapter is easy to use and can be used in many kinds of computer OS. The PCI-E to USB adapter can provide 4 PCI-E USB ports, so you will have more ports to connect. Installation Instructions: 1. The first step, when you use the adapter card, the computer needs to be turned off before they can connect the adapter card. 2. The Second step, connect to the motherboard's PCI-E slot. Use USB3.0 data cable adapter to connect the ends of the two USB port. Connect the power supply. 3. The third step: After completion of the above two steps, first in no hurry to insert your PCI-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation. Specification: Bus interface: PCI-E x 1.(Compatible with 4x, 8x, 16x/graphic card interface) Interface: PCI-E USB interface x 4. Size: 120x67x57mm. Compatible system: Replacement for Linux, replacement for WinXP/Win7/Win8/Win10. Package Includes: 1x 4 Port USB 3.0 Riser Card Note: Conversion: 1inch=2.54cm, 1cm=0.393inch Please allow slightly 0-1cm difference due to manual measurement. Colors can appear different depending on light and how the listing is viewed. Thanks for your understanding and attention. Wish you a pleasant shopping experi

✨ele999✨PCIe 1 To 4 PCI Express 16X Slots Riser Card PCI-E 1X To External Adapter Features: 1. Note: In order not to burn the equipment, make sure the position is right when you plug a card, otherwise don't plug in or mismatch. To avoid breaking the pin, please hold the socket when you plug in. 2. Compatible: This product is compatible with PCI express 2.0, 1.1 Specification. 3. High spped: PCI-E 1X to 4 slot 16X riser card with high speed USB 3.0 cable. It has high speed. 4. Support 4 port: This product support 4 port, it has high speed PCIe 16X card. 5. Easy installation: This product is very easy to install, no additional tools are needed, and the installation process is very convenient. Description: This extension cable can be applied to motherboard with spare PCI-E X1 Slot, make sure your computer is turned off before plugging it in or out. Specifications: Product status: stock Model Number: HXT-51X USB cable length: 60cm Slot: 4 Package Included: 1 set * PCI-E 16X Board 1 pc * PCI-E 1X Riser Card 1 pc * USB 3.0 Cable 2 pc * SATA 15Pin-4Pin Power Cable Notes: 1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real ob

#Wireless #Card #to #pciE-1X #to #NGFF-Ekey #PCIE #Laptop #Pc #WIFI #WLAN #Card #Adapter Wireless Card to pciE-1X to NGFF-Ekey PCIE Laptop Pc WIFI WLAN Card Adapter Wireless Card to pciE-1X to NGFF-Ekey PCIE Laptop Pc WIFI WLAN Card Adapter Dual Antenna Adapter Board Description: 100% brand new,high quality Features: The PCI-E M.2/NGFF Card passive adapter is designed for wireless application on desktop PCs that convert half-size MiniCard(NGFF ) to USB 9pin Header or standard PCI-Express 1x slot. - You can insert your USB type M.2 card to this adapter then plug to USB 9pin header port through USB cable. Or insert your PCI-E type M.2/NGFF card into this adapter then insert to PCI-E 1x connector. - WiFi & Bluetooth-compatible Combo card such Dual Band Wireless-AC 7260/7265/8260ac can be used for supporting both WiFi by PCIe and Bluetooth-compatible by USB at the same time. - Low Profile Height PCI Express1x Add-in Card – Standard Height by bundled bracket - Support PCIe MiniCard: IEEE WLAN802.11a/b/g/n, 802.11d, 802.11e, 802.11i, 802.11h, 802.11ac - Transparent to operating systems and does not require any software drivers. (Note the WIFI card need the software drivers) Specifications: Item Type: Wireless Card Material: ABS Size: approx. Antenna length 65mm / 2.56in, circuit board: 75x70 mm / 2.95x2.76in Color: As Shown Quantity: 1 Pc Note:. The adaper don't support ThinkPad Wlan card(FRU#) Not Includes the NGFF Wlan Card !! Transition: 1cm=10mm=0.39inch. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 xWireless Card to PCI express Adapter 1 x USB Cable (4pin to 4Pin) (other accessories demo in the picture is not inclu

Description: 100% Brand new and high quality mSATA interface solid state disk to 2.5 inch SATA interface hard disk conversion box Interface Specification: This product only supports SATA defined mSATA SSD Colour: Black Material: PC + metal Package Contents: 1* mSATA to SATA Card 1* CaseOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

integrated high-speed signal enhancement technology PCIE3.0 GEN3 full speed design Not pasted, the motherboard self-test does not delay with large capacity tantalum constant voltage filter. Name: PCIE 3.0 X4 NVMe Expansion Riser el: SK4 Support: NVMe m.2 SSD (various PCIE protocols) Not supported: NGFF m.2 disk (for SATA Protocol) Slot: PCIE X4 X8 X16 compatible Colour: black Material: PC+metal Package Contents: 1 x M.2 NVMe SSD NGFF TO PCIE X4 adapter 1 x screwdriver 1 x screw pack 1 x Thermal silicon waferOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Added BIOS, enhanced compatibility with motherboards and graphics cards, reduced power consumption. Effectively soe the problem that the motherboard PCI-E interface is not enough, an interface can be extended out of 4 Plug-in board design, directly connected to the motherboard interface without extension cable, and can be fixed to the chassis, greatly improving the stability and reliability The main control board adopts the PCI-E interface direct power supply e, no external power line is needed, so that the main control power is not affected by external interference, and the stability is higher. Reducing the number of adapters and patch cords, one wire directly to the interface, effectively reduce interface interference and wire loss, ensure data reliability, and improve work efficiency The USB connector is gold-plated, which reduces the interference between interfaces and enhances the integrity of the data. It increases the LED flashing when the six LEDs are turned on. colour: black Material: metal size: 120x55x75mm Package Contents: 1 x Riser CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: This 4-port USB PCI-E board supports USB 3.0 that can provide a fast data transmission speed, and it is powered by PCI-E interface, stable and secure. The PCI-E to USB extender card features a PCI-E X1 bus interface, you can connect it with 4x, 8x, 16x/graphic card interface The PCI-E to USB riser card features a simple installation and is designed with a LED indicator light, so you can easily know the work status. The PCI-E X1 to USB adapter is easy to use and can be used in many kinds of computer OS. The PCI-E to USB adapter can provide 4 PCI-E USB ports, so you will have more ports to connect. Installation Instructions: 1. The first step, when you use the adapter card, the computer needs to be turned off before they can connect the adapter card. 2. The Second step, connect to the motherboard's PCI-E slot. Use USB3.0 data cable adapter to connect the ends of the two USB port. Connect the power supply. 3. The third step: After completion of the above two steps, first in no hurry to insert your PCI-E card, start the computer to see if your computer has been identified to the riser card, if you did not find the card, repeat the above operation. Specification: Bus interface: PCI-E x 1.(Compatible with 4x, 8x, 16x/graphic card interface) Interface: PCI-E USB interface x 4. Size: 120x67x57mm. Compatible system: Replacement for Linux, replacement for WinXP/Win7/Win8/Win10. Package Includes: 1x 4 Port USB 3.0 Riser Card Note: Conversion: 1inch=2.54cm, 1cm=0.393inch Please allow slightly 0-1cm difference due to manual measurement. Colors can appear different depending on light and how the listing is viewed. Thanks for your understanding and attention. Wish you a pleasant shopping experi

1. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. 2. The thickness of the cable wire is 1.4mm, so the wire is softer. The wire can be bent or folded, but do not pull it. 3. The differential signal has no via design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro-short circuit, and the product is durable. 4. The product uses high-quality materials, PCB workmanship precision, copper thickness is thickened to 1oz, gold finger gold content is sufficient, gold-plated foot has good electrical conductivity, which can reduce the blue screen of the crash caused by the increase of oxidation and rust resistance. 5. The cable used in the product itself is very durable. It is protected by a PCB gasket with a thickness of 3mm at the metal welding point, and is fastened with screws and hex nuts. PCB dwarf and fat design, dwarf will not get stuck to the graphics card, add fat and long design to make the board easier to install, reducing the chance of damage. Cable length Description: The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below. Colour: Black Material: PCB+TPE Size: Cable length is about 5cm / 10cm / 30cm / 20cm Package Contents: 1 x mPCIe to PCIe x1 Extension Cable<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. This Expansion Card allow users add 1X 19pin USB 3.0 IDC header and 2X USB 3.0 Type A ports on desktop computers by PCI Express(1X) slot for front panel or internal USB device. The added-on 1X 19 pin USB 3.0 IDC header ports will extend to 2X USB 3.0 Type A. These USB 4X 3.0 ports can provide superspeed 5Gbps max(totally)speed for videos, audios, photos data transfer. 2. 4 power supply ules, each power supply only provides one interface, and each interface has exclusive 2A power supply. 3. Select high performance USB 3.0 host controller. More Technology will guard data safty:1. Added-on 4X power ule to provide 8 amperes (each port 5V/2A max) current ensure adequate power supply for USB device. 2.Designed 5X electric circuit protector,4X voltage stable capacitance and 4X voltage stable inductance to protect data safety than ever. 4. Compatible System: 1. Plug and Play on Windows 10,8.1,8 and Windows Server 2012,2012R2,2016,2019(32/64bit).2. Need to install driver on Windows XP, Vista,7(32/64bit) and Windows Server 2003,2003R2,2008,2008R2(32/64bit).3. Works on most main strean Linux systems, no tech-support on Linux PCs. 4.NOT for MAC OS system. 5. WARNING:1. Please install driver for USB card on Windows 7 and before version systems.2. Make sure PCs mother board have spare PCIe slot for PCIe USB card.3. Make sure USB device is USB 3.0 or can't get USB 3.0 speed.4. All USB ports share 5Gbps banwidth. Colour:Black + Sier Material:PCB+metal Package Contents: 1* PCIE to USB 3.0 Expansion Card 1* Low Profile Bracket 1* CDOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

This 4-port USB PCI-E board supports USB 3.0 that can provide a fast data transmission speed, and it is powered by PCI-E interface, stable and secure. The PCI-E to USB extender card features a PCI-E X1 bus interface, you can connect it with 4x, 8x, 16x/graphic card interface The PCI-E to USB riser card features a simple installation The PCI-E X1 to USB adapter is easy to use and can be used in many kinds of computer OS. The PCI-E to USB adapter can provide 4 USB ports, so you will have more ports to connect. Colour:blue Material:metal Size:12 x 7cm Package Contents: 1 * PCI-E RiserOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. M.2 to PCIe 4X Adapter can convert the NGFF M.2 interface into PCI Express 4X interface. 2. Floppy 4 pin power connector available for stable power supply. 3. 2 Screw holes 22x60 / 22x80 available. Easy installation and no driver required. 4. with LED Voltage indicator. Support data transmission up to 4.0GB/s. 5. Support OS: Windows Vista / XP / 7 / 8, Linux, Mac. Compatible with PCI-E 1X / 4X / 8X / 16X slot. Note: M.2 NGFF to PCI-E X4 riser card, use this riser card to convert M.2 NGFF interface to ordinary PCI-E X4 interface, there are 2 fixed holes on the board, 22 respectively x 60mm, 22 x 80mm, according to the length of the slot in your machine, it can be broken and positioned. It must be noted that after the break off, our company does not support returns, you must make sure that it can be used before breaking! Type: Cable Adapter Type: NGFF M.2 M Key to PCI Express 4X Adapter Product Name: NGFF M.2 to PCI-E 4X Riser Card Features: 3.3V 12V LED Indicator Power Supply: 15Pin SATA Power Cable Compatible: with 1X 4X PCIE Slot Interface: NGFF M2 to PCIE X4 colour:White Material:PC+metal size:80 x 23mm Package Contents: 1 x M.2 to PCIe 4X Card 1 x Screwdriver 1 x Power CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

✨[Goodshop] PCIe 1 To 4 PCI Express 16X Slots Riser Card PCI-E 1X To External Adapter Features: 1. Note: In order not to burn the equipment, make sure the position is right when you plug a card, otherwise don't plug in or mismatch. To avoid breaking the pin, please hold the socket when you plug in. 2. Compatible: This product is compatible with PCI express 2.0, 1.1 Specification. 3. High spped: PCI-E 1X to 4 slot 16X riser card with high speed USB 3.0 cable. It has high speed. 4. Support 4 port: This product support 4 port, it has high speed PCIe 16X card. 5. Easy installation: This product is very easy to install, no additional tools are needed, and the installation process is very convenient. Description: This extension cable can be applied to motherboard with spare PCI-E X1 Slot, make sure your computer is turned off before plugging it in or out. Specifications: Product status: stock Model Number: HXT-51X USB cable length: 60cm Slot: 4 Package Included: 1 set * PCI-E 16X Board 1 pc * PCI-E 1X Riser Card 1 pc * USB 3.0 Cable 2 pc * SATA 15Pin-4Pin Power Cable Notes: 1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real ob

Using a PCIe SATA card and 5 SATA cables, you can add 5 SATA 3.0 6Gbps / s devices to your computer. The 5-port SATA controller based on JMB585 main chip offers more stable and high performance, providing speed up to 1700 MB / s. Hot swappable, plug and play, no driver required, compatible with Windows 10/8/7 / Vista / XP, Mac OS 9/10 and Linux above. The PCIe to SATA III 5-port expansion card comes with a low profile bracket and 5 SATA cables to fit into PCIe X4 / X8 / X16 slots. [Note] -If your main board supports PCIe boot function, you can install OS on the disk connected to this PCIe SATA card. If your mainboard has RAID function, you can create RAID with this SATA card. WIN10 support software RAID 0/1.(Not support Boot as System Disk). Feature: Built-in JMB585 (PCIe Gen3x2 to SATA 6Gb / s x5) Controller: The data transmission speed of JMB585 reaches 1700MB / s. This is the maximum transfer rate for PCIe Gen3x2. This is the fastest data read / write transfer rate for multiple hard disk storage solutions in the field. Note: 1.To install OS disk, make sure the main board supports PCIe boot function 2.Not support boot as System Disk Color: black + red Material: electronic components Package Contents: 1 * PCIe 3.0 4x to 5-port SATA III expansion card 5 * SATA red cable 1 * Full profile bracket 1 * Low profile bracketOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Added BIOS, enhanced compatibility with motherboards and graphics cards, reduced power consumption. Effectively soe the problem that the motherboard PCI-E interface is not enough, an interface can be extended out of 4 Plug-in board design, directly connected to the motherboard interface without extension cable, and can be fixed to the chassis, greatly improving the stability and reliability The main control board adopts the PCI-E interface direct power supply e, no external power line is needed, so that the main control power is not affected by external interference, and the stability is higher. Reducing the number of adapters and patch cords, one wire directly to the interface, effectively reduce interface interference and wire loss, ensure data reliability, and improve work efficiency The USB connector is gold-plated, which reduces the interference between interfaces and enhances the integrity of the data. It increases the LED flashing when the six LEDs are turned on. colour: black Material: metal size: 120x55x75mm Package Contents: 1 x Riser CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

SE-SA1061A-2T is a PCI Express single-chip SATA expansion card, from PCI-E to 2 SATA Gen III 6Gb/s channel host controllers, providing server-level functions for desktop computers. SE-SA1061A-2T PCI Express SATA-3.0 expansion card can use the industry's newest 6Gb/s hard drive. At the same time, it is backward compatible with traditional SATA 1.5Gb/s or SATA 3Gb/s drives. It uses the same cables and connectors as previous generations of SATA to simplify integration. In addition, PCI Express 2.0 has twice the bandwidth of the existing PCI Express bus, enabling faster data throughput. It will enhance system performance for every type of computer user. Each PCI Express 2.0 channel can provide up to 500MB/s throughput. It is also backward compatible with the previous generation PCI Express 1.0 technology. PCIe slot: 1. Compliant with PCIe 2.0 specification and support 1xLane PCIe 2.0 endpoint devices 2. Support 2.5 Gbps and 5.0 Gbps communication speed 3. Support IDE programming interface register of SATA controller 4. Support AHCI programming interface register of SATA controller 5. Support product power management 6. Support error reporting, recovery and correction 7. Support Message Signal Interrupt (MSI) SATA controller: 1. Comply with Serial ATA Specification 3.0. 2. Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps communication speed. 3. Support programmable transmitter signal level. 4. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i. 5. Support two SATA ports. 6. Support AHCI 1.0 and IDE programming interface. 7. Support native command queue (NCQ). 8. Support porter switch based on FIS or switch based on command. 9. Support partial and sleep power management state. 10. Support staggered rotation. Operating system: Windows XP / Vista / Win 7 / Win 8 / Server 2003 / Server 2008 R2. Linux 2.6.x and higher, an available PCI Express slot colour:Green Material:PCB+metal Package Contents: 1 x Pcie to 2 port SATA3.0 adapter card 2 x SATA cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. PCI-E 4X, 8X, 16X slot 2. Only supports NVME protocol 3. Suitable size: 2230 2242 2260 2280 Size size:10.5x12x1.8CM Material:PCB colour:Black Package Contents: 1 x Adapter 1 x Small baffleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Support PCI-E X1 slot compatible with X4/X8/X16 slot USB3.0 4-port expansion card for faster and more stable performance Provide two USB3.0 standard ports, you can access any USB devices Provide 1 USB3.019PIN interface, can be extended to 2 USB3.0 ports to connect to the front USB3.0 expansion cable or connect 19P to A female adapter When using high-powered USB devices, users can connect the power supply 15PIN plug to enhance the power output capacity of the product, that is, you feel that the on-board power output is not enough, you can connect the 15P to strengthen the power Name: PClE to high-speed USB3.0 expansion card for desktop computers el:PH16 Support system: Microsoft windows xp/vista/WIN/WIN8/WIN10 USB3.0 features: faster transfer speed, theoretical 5GB / S than USB2.0 theoretical 480MB / S 10 times faster output power higher 5V / 900MA, than 2.0 500MA nearly 1 times higher backward compatible with USB2.0 and USB1.1 Colour:black Material: PCB Size:120 x 80mm Package Contents: 1 x PCIE to USB3.0 quad-port expansion cardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: An effective solution to the motherboard PCI-E interface is not enough, an interface can be extended out 4-port usb3.0 The use of plug-in design, without extension cable directly into the motherboard interface, and can be fixed to the chassis, the stability and reliability greatly improved! The main control board adopts PCI-E interface direct power supply mode, no need to external power cord, so that the main control board power from outside interference, higher stability! Reduce the number of adapter and adapter cable, a line directly to the interface, effectively reduce the interface interference and wire loss, to ensure data reliability, thereby improving work efficiency Specification: Interface Type: PCIE 1X to 4 USB Bus Type: PCI-Express X1 Applicable Slot: PCI-E X1, X4, X8, X16 Transmission speed: 5Gbps Use: For Mining Support system:for Linux, Windows XP/7/8/10 Weight:70g Size:120x67x57mm/ 4.7x2.6x2.2 inch Package Includes: 1 x PCI-Express Riser

Adds 2 RS-232 serial port (Standard RS-232 DB9 male serial port compliant) through an available PCI Express Lane.Application area: Industrial computer, communication, LED control, POS machine display, engraving machine, cutting plotter, punch card machine, POS, access control attendance. WCH382L chipset, Connects more serial device to your computer easily. PCIe X1/X4/X8/X16 lane for installation, Rugular and low-profile bracket include for 4U/2U frame. Faster data rates up to 1.5Mbps for parallel port. Supporting SPP/PS2/EPP/ECP es and centronics interface. Compliant with Single-Lane (x1) PCI-Express specification revision 1.0a. Operating System: Windows 98/Me/NT4.0/2000/XP/Vista/Win7/Win8/Server2003/Server 2008/LINUX/DOS. Colour:green Material:plastic Package Contents: 1 * Pcie CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1