Camera arduino

【ART】VGA OV7670 CMOS camera module lens 640x480 sccb i2c interface for arduinoDescription: OV7670 image sensor, providing single-chip VGA camera and image processor for all functions Through the SCCB bus control, outputFull frame, sub-sampling, taking a variety of windows, etc. affect the data resolution Products VGA images up to 30 frames / sec. Users can fully control the image quality, data formats and transmission. All image processing functions including gamma curve process, white balance, saturation, hue and so on through the SCCB interface programming. OmmiVision image sensor applications unique sensor technology, by reducing or eliminating optical or electronic defects such as fixed pattern noise, prop tail, floating powder, etc., to improve image quality, get a clear and stable color image. Features: High sensitivity suitable for illumination applications Low voltage suitable for embedded applications Standard SCCB interface compatible with I2C interface RawRGB, RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format Supports VGA, CIF, and from a variety of sizes CIF to 40x30 VarioPixel sub-sampling mode Auto affect the control features include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination light stripes, automatic black level calibration image quality controls including color saturation, hue, gamma, sharpness ANTI_BLOOM ISP has a compensation function to eliminate noise and dead pixels Support for image scaling Compensation for loss of optical lens 50/60Hz automatic detection Saturation automatically adjust (UV adjustment) Automatically adjust edge enhancement Noise Reduction automatically adjust Specifications: Photosensitive array: 640X480 O Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V) Power operation: 60mW/15fpsVGAYUV Sleep: <20μA Temperature Operating: -30 ℃ to 70 ℃ Stable: 0 ℃ to 50 ℃ Output Formats (8)? YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data Optical size: 1/6 " FOV: 25 ° Maximum Zhen rate: 30fps VGA Sensitivity: 1.3V / (Lux-sec) SNR: 46 dB Dynamic range: 52 dB View Mode: Progressive Electronic Exposure: 1 line to 510 line Pixel Size: 3.6μm x 3.6μm Dark current: 12 mV / s at 60 ℃ Package Includes: 1x ov7670 Image sensor mage transducer m

Description OV7670 image sensor, small size, low operating voltage, and provides all the features of the single-chip VGA camera and image processor. Through theSCCB bus control, you can output the entire frame, sub-sampled, take the window way affect the data resolution of 8 bits. VGA image of the product is up to 30 frames / sec. Users can fully control the image quality, data format and transmission mode. The process of image processing functions including gamma curves, white balance, saturation, chroma, and so can beprogrammed through the SCCB interface. OmmiVision image sensor applications unique sensor technology to improve image quality by reducing or eliminating the optical or electronic defect, such as fixed pattern noise, tail-blooming, clear and stable color image. High sensitivity for low-light applications Low voltage suitable for embedded applications Standard SCCB interface compatible with I2C interface RawRGB to RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2)output format support VGA, CIF, and from CIF to 40x30 the size VarioPixel subsampling way eliminate light stripes, automatic black level calibration image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM ISP has eliminate noise and dead pixel compensation function support image scaling The lens is the loss of light compensation 50/60Hz detection the saturation automatically adjust ( UV adjustment) edge enhancement automatically adjust Noise Reduction automatically adjust key parameters photosensitive array 640X480 IO voltage 2.5V to 3.0V ( internal LDO to core supplies ) the power operation 60mW/15fpsVGAYUV Sleep < 20 μ A temperature operation from -30 ° C to 70 ° C 0 ° C to 50 ° C ( 8 -bit) output format ? YUV/YCbCr4 RGB565/555/444 GRB4: 2:2: 2:2 Raw RGB Data Optical size of 1/6 " field of view angle of 25 ° maximum Zhen rate 30fps VGA Sensitivity 1.3V / (Lux-sec) signal to noise ratio of 46 dB dynamic range of 52 dB browsing mode progressive electronic exposure area of 3.6 μ mx 3.6 μ m dark current 12 mV / s at 6

❄ Welcome To Chitengyesuper ❄ Feature Data link: Http://www.mediafire.com/file/ob1f2toa2yubyhu/229JDY30.rar/file Advantages: it can replace all Bluetooth 3 and 2 serial communication modules on the market. Support Bluetooth SPP protocol, transmission speed can reach 30kb/s Application scope: 1: Bluetooth printer 2: Bluetooth POS machine 3: smart home control 4: Bluetooth wireless data transmission Package include: 1pc* HC-05 Bluetooth RF Transceiver M

ESP32-CAM WiFi + Bluetooth Module Camera Module Development Board ESP32 with Camera Module OV2640 2MP For Arduino Product Features： Low-power dual-core 32-bit CPU for application processors Main frequency up to 240MHz, computing power up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras, built-in flash Support image WiFi upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click distribution network Support secondary development For more details, please click on the product picture to view. Package Included: 1pcs * ESP32-CAM Module 1pcs * Camera Module OV2640 2MP Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP32-CAM #WiFi + #Bluetooth #Module #Camera #Module #Development #Board #ESP32 #with #Camera #Module #OV2640 #2MP #For #Ar

Đặc trưng: CPU 32-bit lõi kép công suất thấp dành cho bộ xử lý ứng dụng. Tần số chính lên đến 240MHz, khả năng tính toán lên đến 600 DMIPS. Tích hợp 520 KB SRAM, PSRAM 4M bên ngoài. Hỗ trợ các giao diện như UART / SPI / I2C / PWM / ADC / DAC. Hỗ trợ máy ảnh OV2640 và OV7670, đèn flash tích hợp. Hỗ trợ tải lên WiFi hình ảnh. Hỗ trợ thẻ TF. Hỗ trợ nhiều chế độ ngủ. Lwip nhúng và RTOS miễn phí. Hỗ trợ chế độ làm việc STA / AP / STA + AP. Hỗ trợ cấu hình thông minh / mạng phân phối một cú nhấp chuột của AirKiss. Hỗ trợ phát triển thứ cấp. Sự chỉ rõ: Điện áp: 5V Hiện tại: 2A Kích thước: 2.7x4cm / 1.06x1.57 inch Màu sắc: Như hình Số lượng: 1Pc Ghi chú: 1. chuyển: 1 cm = 10 mm = 0.39 inch 2. xin vui lòng cho phép lỗi 0-3mm do đo lường thủ công. xin hãy chắc chắn rằng bạn không nhớ trước khi bạn trả giá. 3. do sự khác biệt giữa các màn hình khác nhau, hình ảnh có thể không phản ánh màu sắc thực tế của mặt hàng. Cảm ơn bạn! Features: Low-power dual-core 32-bit CPU for application processors. Main frequency up to 240MHz, computing power up to 600 DMIPS. Built-in 520 KB SRAM, external 4M PSRAM. Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC. Support OV2640 and OV7670 cameras, built-in flash. Support image WiFi upload. Support TF card. Support multiple sleep modes. Embedded Lwip and Free RTOS. Support STA/AP/STA+AP working mode. Support Smart Config/AirKiss one-click distribution network. Support secondary development. Specification: Voltage: 5V Current: 2A Dimensions: 2.7x4cm/1.06x1.57inch Color: As shown Quantity: 1Pc   Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package: 1 x Development

Description: Using imported chip TCS3200 TCS3200 is TCS230 upgrade version , the better Power supply 3-5v Anti- light interference White LED, can control the on and off . It can detect non-luminous object color Best detection distance of 1cm Specifications: Chip: TCS3200 Input voltage: DC 3 ~ 5V Output frequency voltage: 0 ~ 5V Use bright white LED lights Can be connected directly with Microcontroller Static detection of the measured object color Best detection distance: 10mm Package Included: Package Included: 1 x TCS230 TCS3200 Detector Module Color Recognition Sensor for MCU Arduino Note: -Due to the manual measurement and different measurement methods, the actual size could be slightly different. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. • If you wish to change details after you placed an order, please cancel the order within 30 minutes and place a new one. If you miss out the correct step your order will not be allowed to cancel order/change. • When received the parcel, please check before you click button "order received". • Please contact us if you have any concern before opening a dispute, give us an opportunity to resolve the pro

NRF24L01 + wireless ule 2Mbit / s 1Mbit / s 250Kbit / s transfer rate options MultiCeiver hardware to provide the 6 receiver functions at the same time + / - 60 ppm crystal Only need an external inductance when match antenna No multi-layer PCB 5V input tolerance level No need external level converter Improved ShockBurst and serial interface can be easily connected with a variety of low-cost MCU No MCU with SPI Interface 20 pin 4x4mm QFN leadless package very few external components The 2Mbit / s rate when the peak current 12.5mA received The 2Mbit / s rate @ 0dBm output current of 11mA peak 2Mbit / s rate of only a small average current 400nA Power-down e, power consumption Power consumption of 32uA in standby e 130us fast switching and wake-up time With on-chip voltage regulator oltage regulators In the 1.9 to 3.6V low voltage operation Possible to reduce noise Application: Mouse, keyboard, wireless headsets, intelligent sports equipment, remote controls, voice applications, security devices, VOIP applications. Colour: as shown Material: PCB Size: 18 x 12 x 2mm Package Contents: 5 x uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

❄ Welcome To Chitengyesuper ❄ Descriptions: *This extension board can be used for engraving machine, 3D printer and other drive expansion board. *4 stepper motor drive module slot can drive 4 road into the motor, and each step stepper motor only need two IO port, that is, 6 IO port can be a very good management of three stepper motor. *Very easy and convenient to use. *With high quality and durable performance. *100% brand new and in good condition. *Color: As pictures show Package including: 1 * A4988 Driver

Features: Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 Support file format:MP3/WAV Support Micro SD card, Micro SDHC Card 30 class adjustable volume UART TTL serial control playback mode, baud rate is 9600bps Power supply can be 3.2 ~ 5.2VDC Size:43mm x 25mm Package included

ESP8266 TransceiverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: Including the following resources: 1. 8 key 2. 8 LED common cathode 3. 8 a digital tube common cathode Use TM1638 digital tube drive chip to drive common cathode LED digital tube How to connect: VCC GND 5V power supply, STB CLK DIO MCU I/O port This module for the chip TM1638, set the above three kinds of single chip microcomputer common peripheral circuit, the biggest characteristic is to simply take microcontroller three IO mouth can drive, scanning display and key scan don't need microcontroller intervention, only need to register to display data related to reading and writing or testing buttons, save MCU resources. Buy the module provides an example program. Wiring methods : VCC GND connected 5V supply, STB CLK DIO connected microcontroller IO port. Specification: Color: As Pictures Show Size: As Pictures Show Quantity: 2pcs Product list: 2 * TM1638 LED Digital Tube Modules Note: -Due to the manual measurement and different measurement methods, the actual size could be slightly different. -Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. • If you wish to change details after you placed an order, please cancel the order within 30 minutes and place a new one. If you miss out the correct step your order will not be allowed to cancel order/change. • When received the parcel, please check before you click button "order received". • Please contact us if you have any concern before opening a dispute, give us an opportunity to resolve the pro

Description: OV7670 image sensor, providing single-chip VGA camera and image processor for all functions Through the SCCB bus control, outputFull frame, sub-sampling, taking a variety of windows, etc. affect the data resolution Products VGA images up to 30 frames / sec. Users can fully control the image quality, data formats and transmission. All image processing functions including gamma curve process, white balance, saturation, hue and so on through the SCCB interface programming. OmmiVision image sensor applications unique sensor technology, by reducing or eliminating optical or electronic defects such as fixed pattern noise, prop tail, floating powder, etc., to improve image quality, get a clear and stable color image. Features: High sensitivity suitable for illumination applications Low voltage suitable for embedded applications Standard SCCB interface compatible with I2C interface RawRGB, RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format Supports VGA, CIF, and from a variety of sizes CIF to 40x30 VarioPixel sub-sampling mode Auto affect the control features include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination light stripes, automatic black level calibration image quality controls including color saturation, hue, gamma, sharpness ANTI_BLOOM ISP has a compensation function to eliminate noise and dead pixels Support for image scaling Compensation for loss of optical lens 50/60Hz automatic detection Saturation automatically adjust (UV adjustment) Automatically adjust edge enhancement Noise Reduction automatically adjust Specifications: Photosensitive array: 640X480 O Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V) Power operation: 60mW/15fpsVGAYUV Sleep: <20μA Temperature Operating: -30 ℃ to 70 ℃ Stable: 0 ℃ to 50 ℃ Output Formats (8)? YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data Optical size: 1/6 " FOV: 25 ° Maximum Zhen rate: 30fps VGA Sensitivity: 1.3V / (Lux-sec) SNR: 46 dB Dynamic range: 52 dB View Mode: Progressive Electronic Exposure: 1 line to 510 line Pixel Size: 3.6μm x 3.6μm Dark current: 12 mV / s at 60 ℃ Package Includes: 1x ov7670 Image sensor mage transducer m

NRF24L01 + wireless ule 2Mbit / s 1Mbit / s 250Kbit / s transfer rate options MultiCeiver hardware to provide the 6 receiver functions at the same time + / - 60 ppm crystal Only need an external inductance when match antenna No multi-layer PCB 5V input tolerance level No need external level converter Improved ShockBurst and serial interface can be easily connected with a variety of low-cost MCU No MCU with SPI Interface 20 pin 4x4mm QFN leadless package very few external components The 2Mbit / s rate when the peak current 12.5mA received The 2Mbit / s rate @ 0dBm output current of 11mA peak 2Mbit / s rate of only a small average current 400nA Power-down e, power consumption Power consumption of 32uA in standby e 130us fast switching and wake-up time With on-chip voltage regulator oltage regulators In the 1.9 to 3.6V low voltage operation Possible to reduce noise Application: Mouse, keyboard, wireless headsets, intelligent sports equipment, remote controls, voice applications, security devices, VOIP applications. Colour: as shown Material: PCB Size: 18 x 12 x 2mm Package Contents: 5 x uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

ღ Welcome To Colorfulswallowfly ღ Product Description: 1. On-board micro-precision current transformer 2. Onboard sampling resistor 3. Modules 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA 4. Rated input current: 5A 5. Rated output current: 5mA 6. Change: 1000: 1 7. The linear range: 0 ~ 10A (100 ohm) 8. Linearity: 0.2% 9. Precision rating: 0.2 10. Uses isolation voltage: 3000V Measurement 11. Sealing material: epoxy resin 12. Operating temperature: - 40 Celsius - + 70 Ce

❄ Welcome To Chitengyesuper ❄ Features: Support sampling frequency (kHz):8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48 Support file format:MP3/WAV Support Micro SD card, Micro SDHC Card 30 class adjustable volume UART TTL serial control playback mode, baud rate is 9600bps Power supply can be 3.2 ~ 5.2VDC Size:43mm x 25mm Package included

Photosensitive Array: 640 x 480; IO Voltage: 2.5V to 3.0V; Operating Power: 60mW/15fpsVGAYUV; Sleeping Mode: <20 uA; Operating Temperature: -30 to 70 deg C.; Output Format: YUV/YCbCr4:2:2 RGB565/555/444 GRB4:2:2 Raw RGB Data (8 digit); Lens Size: 1/6"; Vision Angle: 25 degree; Max. Frame Rate: 30fps VGA; Sensitivity: 1.3V / (Lux-sec); Signal to Noise Ratio: 46 dB; DynamicRange: 52 dB; Browse Mode: By row; Electronic Exposure: 1 to 510 row; Pixel Coverage: 3.6um x 3.6um; Duck Current: 12 mV/s at 6'C Application: High sensitivity for low-light operation; Low operating voltage for embedded application; Standard SCCB interface compatible with I2C interface; Raw RGB, RGB (GRB4:2:2, RGB565/555/444),YUV(4:2:2) and; YCbCr(4:2:2)output format; Support VGA, CIF and from CIF to 40 x 30 format; Vario Pixel method for sub-sampling; Auto Image Control: AEC, AGC, AWB, ABF, ABLC; Image Quality Control: Color saturation, hue, gamma, sharpness and anti-blooming; ISP includes noise reduction and defect correction; Support image scaling; Lens shading correction; Flicker 50/60Hz auto detection; Color saturation level auto adjust; Edge enhancement level auto adjust; De-noise level auto a

1. The ule uses authentic quality relay, normally open interfaces Maximum load: AC 250V / 10A, DC 30V / 10A; 2. Use SMD isolation optocoupler, ability to drive, stable performance.Trip 5mA current. 3. The operating voltage of the ule 5V; 4. The ule can be high or low by a trigger of the jumper setting. 5. The fault-tolerant design, even if the command line is case sensitive, the relay won't work; The power indicator (green), the flag of the State of the relay (red) Interface ule: 1. DC: positive supply (VCC) 2. DC: power negative (GND) 3. IN: control relay may be high or low level Relay outputs: 1. NO: normally open relay interface 2. COM: Common interface relays 3. NC: normally closed relay interface High and low level triggering options: It is low level trigger when the jumper connects to bottom pin It is high level trigger when the jumper connects a high pin Colour:blue Material:PCB Size:50mm x 26mm x 18.5mm Package Contents: 2x Relay uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

✨✨The product is a brand new product 🚛🚛All packages are usually sent out in 2~10 days 📦📦If the product is sent by mistake or damaged, we will exchange it for free or give you a refund Decription: Feature: High sensitivity, low voltage suitable for embedded applications Standard SCCB interface, compatible with I2C interface RawRGB, RGB (GRB4: 2: RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output formats support UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size of the various sizes Support automatic exposure control, automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control, including color saturation, color Phase, gamma, sharpness ANTI_BLOOM and other settings. Supports image scaling, pan and window settings Supports image compression to output JPEG image data comes with embedded microprocessors Integrated active crystal 12M, no need to provide external clock Integrated LDO, only 3.3V power supply can work properly Specofication: The sensor size: 1/4 inch. Pixels: 1600 x 1200 (200W). The output format: RGB565 / JPEG / YUV / YCbCr and so on. The control interface: SCCB. The working voltage: 3.3V The module size: 27mm x 27mm Included: 1 x Camera M

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Mô đun cảm biến hình ảnh camera góc rộng CMOS ESP32 OV2640 2 triệu pixel dành cho Arduino Góc rộng OV2640 Đặc điểm sản phẩm: Camera 2 megapixel, 1/4 với ISP, hỗ trợ đầu ra JPEG. Loại mini OV2640 Chi tiết sản phẩm: OV2640 là cảm biến hình ảnh 1/4 inch CMOS UXGA (1632 * 1232). Kích thước nhỏ gọn và điện áp hoạt động thấp của cảm biến cung cấp tất cả tính năng của một ca mera UXGA duy nhất và bộ xử lý hình ảnh. Thông qua bus điều khiển SCCB, có thể xuất ra dữ liệu hình ảnh 8/10 bit với nhiều độ phân giải khác nhau như full frame, sub-sampling, zoom và windowing. Hình ảnh UXGA của sản phẩm này có thể đạt tới 15 khung hình/giây (tối đa 30 khung hình cho SVGA và 60 khung hình cho CIF). Người dùng có toàn quyền kiểm soát chất lượng hình ảnh, định dạng và truyền dữ liệu. Tất cả tính năng xử lý hình ảnh bao gồm đường cong gamma, cân bằng trắng, độ tương phản, sắc độ, v.v. có thể được lập trình thông qua giao diện SCCB. Cảm biến hình ảnh sử dụng công nghệ cảm biến độc đáo để cải thiện chất lượng hình ảnh và giảm hình ảnh có màu sắc nét và ổn định bằng cách giảm hoặc loại bỏ các khiếm khuyết quang học hoặc điện tử như nhiễu mẫu cố định, nhòe và nổi. Lưu ý: Mô đun cảm biến camera này chỉ dẫn đến một số chân của chip cảm biến CSP và ống kính quang học. Nếu không có các linh kiện ngoại vi tích hợp, cần được thiết kế bởi chính nó. Để biết thêm thông tin sản phẩm, vui lòng xem hình thứ 6, 7, 8 và 9 Gói hàng bao gồm: 1 * Mô đun cảm biến camera OV2640 #ESP32 #OV2640 #Camera #Module #CMOS #Image #Sensor #Module #2 Million #Pixel #Wide #Angle #Camera #Monitor #Identification #Lens #For #Ar

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! Rpi-1031 angle sensor four direction sensor This sensor can output only 4 directi

Welcome to titimeme.vn ! Descriptions: *This extension board can be used for engraving machine, 3D printer and other drive expansion board. *4 stepper motor drive module slot can drive 4 road into the motor, and each step stepper motor only need two IO port, that is, 6 IO port can be a very good management of three stepper motor. *Very easy and convenient to use. *With high quality and durable performance. *100% brand new and in good condition. *Color: As pictures show Package including: 1 * A4988 Driver

100% brand new and high quality. NE555 integrated chip. A single channel output, the square wave of the output work cycle is about fifty percent. Built-in adjustable resistance, the resistance can be controlled to adjust the output frequency. The best option for you or your friend. Specifications: Operating voltage: 5-12V Colour:blue Material:PCB Size:29*12mm Package Contents: 10 x Pulse Generator uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Application: For Freescale's Smart car, Undergraduate Electronic Design, A variety of DC motor control circuit;The drive uses the full two half-bridge driver chip + low resistance N-channel MOSFET components. Complete two half-bridge driver chip reliable drive e, the MOSFET switching losses to a minimum. Improve power utilization. MOSFET driver chip comes with hardware brake function and power feedback. N-channel MOSFET IRF3205 MOSFET, use two dedicated half-bridge driver chip on the top tube using the bootstrap , so that the tube has enough drive voltage of the MOSFET channel can be opened quickly, improve motor acceleration curvature, but also quickly for the motor brake. This allows the trolley can quickly start can quickly kill the car. The driver can operate at 0% -99% of the duty cycle of the PWM ulation, the motor driving voltage can be obtained sufficiently. Material:Plastic + Metal Colour:Green Dimensions: 100 x 70 x 21mm net weight:2.01 oz Motor being transferred: DIR = 1 PWM = PWM Motor Reverse: DIR = 0 PWM = PWM Parking brake: DIR = X PWM = 0 (X is an arbitrary state) Motor and power connections: POWER connected to the positive power supply, GND power supply is negative. Two motors were connected MOTOR1, MOTOR2 Rated voltage: DC 3V~36V Rated current: 15A Peak Current: 30A Package Included: 1 x H-Bridge DC Motor Driver Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

2 axis pan tilt holder fpv ptz bracket camera description gimbal for arduino robot Camera bracket holder or other robotic sensors. 2-axis gimbal. Note: Not to mention sg90 / mg90 servo motor The use of this product should be 2pcs of sg90 or mg90 servos. Servos sold separately in our shop. The bracket has 2 grade variants. - grade a (good quality) - grade b (standard qua

Welcome to little.mangosteen shop,😘I hope you can add it to your favorite store listing! [Mango] VGA OV7670 CMOS camera module lens 640x480 sccb i2c interface for arduinoDescription: OV7670 image sensor, providing single-chip VGA camera and image processor for all functions Through the SCCB bus control, outputFull frame, sub-sampling, taking a variety of windows, etc. affect the data resolution Products VGA images up to 30 frames / sec. Users can fully control the image quality, data formats and transmission. All image processing functions including gamma curve process, white balance, saturation, hue and so on through the SCCB interface programming. OmmiVision image sensor applications unique sensor technology, by reducing or eliminating optical or electronic defects such as fixed pattern noise, prop tail, floating powder, etc., to improve image quality, get a clear and stable color image. Features: High sensitivity suitable for illumination applications Low voltage suitable for embedded applications Standard SCCB interface compatible with I2C interface RawRGB, RGB (GRB4: 2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) output format Supports VGA, CIF, and from a variety of sizes CIF to 40x30 VarioPixel sub-sampling mode Auto affect the control features include: automatic exposure control, automatic gain control, automatic white balance, automatic elimination light stripes, automatic black level calibration image quality controls including color saturation, hue, gamma, sharpness ANTI_BLOOM ISP has a compensation function to eliminate noise and dead pixels Support for image scaling Compensation for loss of optical lens 50/60Hz automatic detection Saturation automatically adjust (UV adjustment) Automatically adjust edge enhancement Noise Reduction automatically adjust Specifications: Photosensitive array: 640X480 O Voltage: 2.5V to 3.0V (internal LDO for nuclear power 1.8V) Power operation: 60mW/15fpsVGAYUV Sleep: <20μA Temperature Operating: -30 ℃ to 70 ℃ Stable: 0 ℃ to 50 ℃ Output Formats (8)? YUV/YCbCr4: 2:2 RGB565/555/444 GRB4: 2:2 Raw RGB Data Optical size: 1/6 " FOV: 25 ° Maximum Zhen rate: 30fps VGA Sensitivity: 1.3V / (Lux-sec) SNR: 46 dB Dynamic range: 52 dB View Mode: Progressive Electronic Exposure: 1 line to 510 line Pixel Size: 3.6μm x 3.6μm Dark current: 12 mV / s at 60 ℃ Package Includes: 1x ov7670 Image sensor mage transducer m

Condition: New Type: Voltage Regulator el Number: Bluetooth 4.2 audio transmitter receiver board Application: Computer size:43.1 x 24.8mm Material:plastic colour:green Package Contents: 1 x Bluetooth 4.2 audio transmitter receiver boardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For iPhone 12 12 Pro 6.1 inch Phone Case with Slide Camera Lens Protector Matte Translucent PC+TPU Bumper Anti-Fingerprint Protective Back Cover Feature: Delicate matte process, translucent, excellent texture. Micro-frosting process, anti fingerprints, smooth and non-greasy. Sliding lens protection, no scratches. Specification: Color: Black, Red, Green, Blue, Sky Blue, Purple, Pink, Yellow (Optional) Process material: PC+TPU Process: injection Applicable model: for iPhone 12 / 12 Pro (6.1 inch) Note: 1. There may be slight size deviations due to manual measurement, different measuring methods and tools. 2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor. Included: 1 X Phone

❄ Welcome To Chitengyesuper ❄ Product Description: 1. On-board micro-precision current transformer 2. Onboard sampling resistor 3. Modules 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA 4. Rated input current: 5A 5. Rated output current: 5mA 6. Change: 1000: 1 7. The linear range: 0 ~ 10A (100 ohm) 8. Linearity: 0.2% 9. Precision rating: 0.2 10. Uses isolation voltage: 3000V Measurement 11. Sealing material: epoxy resin 12. Operating temperature: - 40 Celsius - + 70 Ce

ESP32-CAM WiFi + Bluetooth Module Camera Module Development Board ESP32 with Camera Module OV2640 2MP For Arduino Product Features： Low-power dual-core 32-bit CPU for application processors Main frequency up to 240MHz, computing power up to 600 DMIPS Built-in 520 KB SRAM, external 4M PSRAM Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC Support OV2640 and OV7670 cameras, built-in flash Support image WiFi upload Support TF card Support multiple sleep modes Embedded Lwip and FreeRTOS Support STA/AP/STA+AP working mode Support Smart Config/AirKiss one-click distribution network Support secondary development For more details, please click on the product picture to view. Package Included: 1pcs * ESP32-CAM Module 1pcs * Camera Module OV2640 2MP Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP32-CAM #WiFi + #Bluetooth #Module #Camera #Module #Development #Board #ESP32 #with #Camera #Module #OV2640 #2MP #For #Ar

new version total 16pcs sensor ule kit, For the beginner,16 in 1 ules Sensor Learning Package includes most projects design for those beginners and who want to know more about Arduino. 16 in 1 ules Sensor Learning Package is Compatible with Arduino UNO R3 Mega2560 Mega328 Nano Raspberry Pi. Detailed tutorial including project introduction and their source code will be provided FOR FREE. Those sensors will often being used in the beginner's project.It is included Sound and Obstacle avoidance sensor,Obstacle avoidance sensor,temperature and humidity sensor,ultrasonic,A path tracing ule and infrared human body induction sensor. Color: photo colour, Material: plastic metal Package Included: 1 x DHT11 temperature and humidity sensor ule 1 x HC-SR501 infrared human body induction ule 1 x DS1302 real time clock ule 1 x The rain sersor ule 1 x Sound sensor ule 1 x HC-SR04 ultrasonic sersor 1 x The flame sensor ule 1 x KY-008 Laser-head sersor ule 1 x Photosensitive resistance sensor ule 1 x The YL-69 soil moisture sensor 1 x Obstacle avoidance sensor 1 x Vibration sensor ule 1 x MQ-2 gas sensor ule 1 x 315M super regenerative ule 1 x The tilt sensor ule 1 x A path tracing ule Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1