Thiều Hoa
Cập nhật: 06/12/2021
Xe oto điều khiển từ xa biến hình thành robot có sạc pin, có tặng kèm 5 pin AA
9.6
FTB Score
Top 30 bộ điều khiển từ xa 4 kênh 12v
Bộ điều khiển từ xa 4 kênh nguồn cấp 12V
Mô tả
GIỚI THIỆU: Bộ điều khiển từ xa 4 kênh
Bộ điều khiển thiết bị điện từ xa 4 kênh relay, điện áp hoạt động DC 12V, điều khiển bật tắt thiết bị điện
HOẠT ĐỘNG: Bộ điều khiển từ xa 4 kênh
Bộ điều khiển thiết bị điện từ xa 4 kênh relay, điện áp hoạt động DC 12V, điều khiển bật tắt thiết bị điện theo 3 chế độ:
- Chế độ đề: bật thiết bị khi ấn nút, tắt thiết bị khi nhả nút
- Chế độ giữ: Ấn 1 lần bật thiết bị; Ấn 2 lần tắt thiết bị;
- Chế độ bật, tắt bằng 2 phím: 1 phím bật, 1 phím tắt
Các chế độ được lập trình bằng cách nhấn nút reset trên mạch và làm theo hướng dẫn kèm theo thiết bị
Có khả năng học mã từ các tay phát điều khiển từ xa khác nhau
Khoảng cách tối ưu: 50m
Sử dụng relay 12V, tải 220V 10A
Bộ sản phẩm gồm:
+ 1 bộ thu 4 kênh relay
+ 1 tay phát 4 nút nhấn loại tốt (vỏ sắt)
+ 1 hộp nhựa
ỨNG DỤNG:
-Tự học Arduino
-Làm các dự án nhà thông minh
#RELAY #12V #DIEUKHIEN #TUXA
#linhkienmaxre #tlinhkien123 #Arduino #Uno #SmartHome #iot #nhathon
Xem thêm
Xe oto điều khiển từ xa biến hình thành robot có sạc pin, có tặng kèm 5 pin AA
Mô tả
Xe oto điều khiển từ xa biến hình thành robot
thông tin sản phẩm
Kiểu1:18 KÍCH THƯỚC chiều dài 24 cm
Điều khiển từ xa có âm thanh ánh sáng
Tính năng. Tiến lùi, quay trái, quay phải ,xoay 360, biến thành robot và ngược lại
Xe sử dụng 3pin sạc bằng USB và, tay cầm sử dụng 2 pin aa (khách tự mua)
Màu sắc :đỏ và xanh
Sản phẩm làm bằng nhựa abs thiết kế sang trọng giúp
Sản phẩm giúp trẻ nhanh nhẹn học cách quan sát.Làm quen với nhưng chiếc oto sang trọng :))
Món quà ý nghĩa ba mẹ rằng cho bé
#oto_điều_khiển_từ_biến_hình #xeoto #xeotodieukhien #xeotodieukhientuxa #xeotodieukhientuxabienhinh #otodieukhientuxa #otodieukhienbienhinh #otodieukhientuxabienhinh #otodieukhientuxabienhinhthanhrobot #oto_điều_khiển_từ_xa_biến_hình_thành_robot #xeotodieukhientuxabienhinhthanhrobot #xe_oto_điều_khiển_từ_xa_biến_hình_thành_robot #xe_oto_điều_khiển_từ_xa #otodieukhientuxa #oto_điều_khiển_từ_xa #oto_điều_khiển_từ_xa_biến_hình_thành_robot #oto_dieu_khien_tu_xa #oto_dieu_khien_tu_xa_bien_hinh_thanh_
Xem thêm
Bộ truyền và nhận tín hiệu điều khiển từ xa DC 12V 4 kênh RF 200m
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
1 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
Bộ truyền tín hiệu điều khiển từ xa DC 12V 4 kênh RF 200m + thiết bị thu nhận
Mô tả
Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày
Đầy là một công tắc học tập điều khiển từ xa không dây (đầu thu), đầu ra / đầu hoạt động có thể được thay đổi theo ý muốn, rất dễ phù hợp với máy đầu thu phát.
Có 4 Rơle có thể làm cho thiết bị quay hoặc đảo ngược, có thể điều chỉnh bật / tắt thực tế. Âm lượng nhỏ và hiệu suất ổn định và an toàn, độ nhạy đầu thu cao.
Sử dụng cho các ứng dụng điều khiển từ xa trong nước đơn giản đến điều khiển tự động, như cửa tự động, cửa sổ, thiết bị nâng, truy cập lối vào, bộ điều khiển lên xuống, hệ thống báo động điều khiển công nghiệp và an ninh, v.v.
Các điều khiển từ xa này được thiết kế để điều khiển nhiều loại thiết bị điện tử có tín hiệu không dây. Vô cùng dễ dàng để thiết lập và sử dụng.
Tương thích với chip 2262/2260/1527/2240 v.v và một số mã điều khiển từ xa không dây. Vì vậy, có thể đáp ứng nhu cầu của ai đó về việc chọn điều khiển từ xa không dây khi họ muốn sử dụng .
Màu sắc: Như hình ảnh hiển thị
Đầu thu:
điện áp hoạt động: PCB
điều kiện không hoạt động: ít hơn 6mA
nhiệt độ hoạt động: -40 - +80 độ C.
độ nhạy thu: hơn -105dBm
tần số hoạt động: 315 MHz
trong thiết lập. chúng tôi đã làm cho các linh kiện hoạt động cùng nhau, vì vậy bạn không cần phải quan tâm đến tần suất của chúng.
điện áp đầu ra: DC và AC là tùy chọn
dòng điện đầu ra: nhỏ hơn 3A
cường độ dòng điện tải tối đa: 10A
Kích thước: 72mm * 52mm * 26mm
Máy phát điều khiển từ xa:
Khoảng cách từ xa: 200M
Điện áp hoạt động: DC 12V
Tần số: 315mhz
Cường độ dòng điện hoạt động: 13 mAh
Loại mã: Mã cố định / Mã kỹ thuật
Kích thước: 58 x 39 x 14mm
Cách kích hoạt đầu ra:
Tự khóa --- kết nối JP1 với nắp cắt.
Lắc nhẹ --- nắp cắt không phải là nghề nghiệp, JP1 và JP2 cũng không kết nối.
Khóa liên động --- Kết nối Jp2 với nắp cắt ra,
Lắc nhẹ --- nhấn một nút là BẬT, nới lỏng ngón tay của bạn trên cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Tự khóa --- nhấn một nút trong một lần là BẬT, nhấn lại cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Khóa liên --- nhấn một nút là BẬT, nhấn nút khác là TẮT (cần một công tắc kênh và 2 nút điều khiển từ xa).
Gói hàng bao gồm:
1 x Bộ truyền tín hiệu
1 x Đầu thu
Lưu ý: Do ánh sáng chụp ảnh và màn hình khác nhau có thể khiến màu sắc của sản phẩm trong ảnh hơi khác so với thực tế. Sai số kích thước cho phép là +/- 1-
Xem thêm
#TOP 5
bán bộ điều khiển
bộ điều
Bộ điều khiển từ xa 4 kênh GH Electronics học lệnh 12V
Mô tả
Thông số kĩ thuật:
Điện áp sử dụng: 12V
Số kênh: 4 kênh
Tần số: 315Mhz
Học lệnh từ các khiển khác
Khiển inox ca
Xem thêm
Đồ Chơi Xe Điều Khiển Từ Xa Lamborghini Có 4 Loại Khác Nhau, Chạy Siêu Tốc Driff, Chức Năng Đa Dạng Cao Cấp
Mô tả
Đồ Chơi Xe Điều Khiển Từ Xa Lamborghini Có 4 Loại Khác Nhau, Chạy Siêu Tốc Driff, Chức Năng Đa Dạng Cao Cấp
💥 💥Chjp Toys 💥 💥
🌻CHUYÊN ĐỒ CHƠI AN TOÀN
🌻GIAO SỈ SỐ LƯỢNG LỚN - NHỎ
🌻HÀNG KHÔNG QUA TRUNG GIAN - RẺ NHẤT THỊ TRƯỜNG
🌻 LUÔN CÓ SẴN SL LỚN - ẢNH THẬT 100%
🌻 HÀNG XẤU , KÉM CHẤT LƯỢNG HOÀN 100%
☎️ HOTLINE : 0978.466.999 (Sỉ add Zalo)
🔥🔥🔥THÔNG TIN SẢN PHẨM:
🍀Màu sắc : Màu Cam và Màu Đỏ
🍀Có 4 loại: Loại cơ bản - Loại Mở Cánh - Loại Biến Hình Pin Thường - Loại Biến Hình Pin Sạc
🍀Chất liệu : Nhựa Cao Cấp (An Toàn Tuyệt Đối Với Mọi Lứa Tuổi)
🍀Kích thước:
✔Loại Cơ Bản: 31 x 18 x 12 cm: Chạy 4 chiều, Đèn pha sáng, Driff
✔Loại Mở Cánh:31 x 18 x 12 cm: Chạy 4 chiều, Đèn pha sáng, Driff Và Mở cánh mở đuôi
✔Loại Biến Hình Robot: 27 x 14 x 11 cm: Chạy 4 chiều, Đèn sáng xanh lam, Quay 360 độ, Biến hình Robot
🔥🔥🔥ĐẶC ĐIỂM NỔI BẬT :
🍀Đồ Chơi với mô hình siêu xe thật Lambo, với 4 chức năng: Tiến - lùi - rẽ trái - rẽ phải, trẻ sẽ nhanh chóng nhập vai và thể hiện khả năng, bản lĩnh của mình. Quá trình chơi đùa và đua xe với các bạn giúp bé học được nhiều điều bổ ích, đồng thời kích thích phát triển toàn diện
🍀Việc điều khiển xe giúp bé dần hình thành kỹ năng quan sát cho bé nhờ việc bé quan sát chuyển động của đồ chơi hình dạng và màu sắc của chúng
🍀Sản phẩm không những mang đến cho bé những giây phút vui chơi thật thoải mái và vui vẻ bên bạn bè và gia đình mà còn giúp bé phát triển và hoàn thiện các kỹ năng và giác quan
🍀Xe được thiết kế mô phỏng theo xe thật với kiểu dáng hiện đại, bắt mắt cho bé cảm giác thích thú khi chơi
🍀Các chi tiết của xe được làm tỉ mỉ, công phu, không góc cạnh
🍀Hệ thống điều khiển radio (R/C) ổn định hoạt động tốt ở khoảng dưới 10m.
🍀Bộ đèn Pha siêu sáng chạy đc những chỗ ánh sáng kém.
🔥🔥🔥ĐỂ BIẾT THÊM THÔNG TIN CHI TIẾT VUI LÒNG:
🌟Bấm "Theo Dõi" Shop
🌟Bấm "CHAT" Để Liên Hệ Với Shop
🌟Shop Có Nhiều Chương Trình Ưu Đãi, Giảm Giá Đối Với Các Mặt Hàng Hàng Ngày và Hàng Tháng
#xeđiềukhiển
#xeđiềukhiểntừxa
#ôtôđiềukhiển
#đồchơixeđiềukhiển
#đồchơixeđiềukhiểntừxa
#điềukhiểntừxa
#lamboghini
#biếnhình
#xeđiềukhiểntừxagiárẻ
#xedieukhien
#xedieukhientuxa
#otodieukhien
#dochoixedieukhien
#dochoixedieukhientuxa
#dieukhientuxa
#xeôtôđiềukhiểntừxa
#bienhinh
#xeđịahìnhđiềukhiể
Xem thêm
Bộ điều khiển từ xa 4 kênh học lệnh 12V
Mô tả
Thông số kĩ thuật:
Điện áp sử dụng: 12V
Số kênh: 4 kênh
Tần số: 315Mhz
Học lệnh từ các khiển khác
Khiển inox ca
Xem thêm
Mô Đun Điều Khiển Đèn Từ Xa 1 Kênh Dc 12v 1ch Chống Thấm Nước
Mô tả
#DC12V #1CH #Waterproof #1 #button #Remote #Control #Single #Light #Switch #Receiver #Module #Transmitter #Controller #for
DC12V 1CH Waterproof 1 button Remote Control Single Light Switch Receiver Module Transmitter Controller for Lamps Garage Door Gate
Description:
100% brand new and high quality
Feature:
Adopt high-efficiency, green and low-energy switching power supply scheme, wide voltage range, static no heat, good stability.
The advanced superheterodyne receiving technology is adopted, and the intelligent MCU has many advantages such as good stability, strong anti-interference ability and many functions.
The high-power relay with good quality is selected to enhance the load capacity and last for a long time.
Application areas: various lamps, remote control fans, remote control appliances, remote control plugs, etc.
Specifications:
Item Type: Wireless Receiver Transmitter
Material: plastic+metal
Size:5.5X3X1cm
Color: Black
Voltage: DC 12V
Channel: 1CH
Quantity: 1 PC
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:
1 x Receiver Module
1 x Remote Co
Xem thêm
Bộ điều khiển hồng ngoại Broadlink Bestcon RM4 mini RM4C Quốc Tế 2021 WiFi hỗ trợ Google Home Alexa Apple Homekit HASS
Mô tả
Bộ điều khiển hồng ngoại Broadlink Bestcon RM4C mini có khả năng thay thế các chiếc Remote thông thường trong ngôi nhà của bạn, giúp bạn có thể điều khiển các thiết bị điện tử trong nhà (Tivi, điều hòa, quạt điện…) thông qua Smartphone
Với RM4C Mini, bạn không còn phải tìm Remote mỗi khi muốn điều khiển các thiết bị hay bị nhầm lẫn giữa các Remote với nhau
RM4C Mini được nhà sản xuất hỗ trợ sẵn kho cơ sở dữ liệu của hàng ngàn loại điều khiển khác nhau, giúp người dùng dễ dàng cài đặt và sử dụng mà không cần phải cho học lại các lệnh một cách thủ công
Với RM4C Mini, bạn còn có thể cài đặt thời gian để các thiết bị điện tử trong gia đình tự động Bật/Tắt và thiết lập các ngữ cảnh nhà thông minh theo thói quen sống và nhu cầu sử dụng
Broadlink RM Mini 4 và Bestcon RM4C mini là phiên bản nâng cấp của Broadlink RM mini 3 đình đám được rất nhiều người sử dụng. Kiểu dáng hiện đại là cải tiến lớn nhất của sản phẩm, kiểu dáng mới nhưng vẫn đảm bảo tính năng phát sóng 360 độ cực khỏe, đây là ưu điểm vượt trội của bộ điều khiển hồng ngoại Broadlink so với các hãng khác.
Điểm cộng tiếp theo của sản phẩm là hỗ trợ IFTTT, trợ lý ảo Alexa, Google home, Apple homekit, HASS... Việc ra lệnh bằng giọng nói đã trở lên phổ biến và bùng nổ ở Việt Nam từ năm 2019, nhờ có điều khiển bằng giọng nói giúp con người có thể giao tiếp với ngôi nhà của mình một cách tự nhiên và dễ dàng nhất.
~~~~~
THÔNG SỐ KỸ THUẬT:
– Điện áp hoạt động: 5V
– Cường độ dòng điện: 500mA
– Công suất: ≤ 0.85 W
– Tần số hồng ngoại: 38 KHz
– Nhiệt độ: 0 ~ 50°C
– Độ ẩm hoạt động: ≤ 85%
– Chuẩn WiFi: 2.4GHz 802.11b/g/n
– Chuẩn bảo mật: WPA/WPA2
~~~~~
HƯỚNG DẪN SỬ DỤNG
- Tải app "Broadlink" trên Google Play và Apple Appstore
- Tạo tài khoản và đăng nhập
- Reset thiết bị: Nhẫn giữ nút Reset trong khoảng 6s đến khi LED nhấp nháy nhanh
- Trên app: Nhấn nút Add device (hình dấu +), next, next
- Nhập mật khẩu WiFi rồi nhấn connect => đặt tên và vị trí => xong.
*Nếu việc kết nối không thành công: Thử cách kết nối thủ công:
- Kết nối điện thoại với mạng WiFi của RM4C có tên "Universal Remotexxxxxx"
- Thực hiện tiếp tục theo hướng dẫn trên App
~~~~~
Sản phẩm bao gồm:
+ Bộ điều khiển hồng ngoại Broadlink Bestcon RM4C mini
+ Cáp micro USB
+ Chân đế
+ HDSD
Nếu có thắc mắc hãy nhắn tin cho Shop với tính năng Chat trên Shopee.
~~~~~
QUY ĐỊNH ĐỔI TRẢ - BẢO HÀNH
Shop cam kết sản phẩm bán ra đúng như mô tả.
Quý khách nhận hàng vui lòng quay video quá trình mở hộp và test sản phẩm lần đầu. Shop chỉ xử lý những trường hợp khách hàng có video.
Thời gian bảo hành - đổi trả được tính từ ngày khách nhận hàng.
Nếu sản phẩm có vấn đề bạn hãy liên hệ ngay với shop để shop hỗ trợ từ xa. Shop hỗ trợ kĩ thuật và sửa chữa dù sản phẩm đã hết bảo hành.
#linh #kien #module #dien #tu #thong #minh #smart #cam #bien #nha #thong #minh #tu #dong #hen #gio #Google #home #alexa #HASS #homekit
<Hashtag riêng của sản
Xem thêm
Bộ Điều Khiển Từ Xa Không Dây 1 / 2 / 3 / 4 / 6 / 8 / 10 Kênh Chuyên Dụng
Mô tả
Description:
100% brand new and high quality.
Features:
Made of high-quality material, durable, firm and stable for us to use.
7 types of button keys: 1/2/3/4/6/8/10 button keys for you to choose from to meet your needs.
The receiver must have a learning button to pair. Easy and convenient to use.
Safe and flexible for operation and install.
Widely use in house, mall, electromobile, cars, motorcycle anti-theft alarm system or other control systems.
Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm industry.
Remote Control only, other accessories demo in the picture is not included!
Specifications:
Item Type: Remote Control
Material: ABS
Size: 37x14x110mm/1.4x0.5x4.3in
Color: White
Number of Keys: 1 key, 2 key, 3 key, 4 key, 6 key, 8 key, 10 key(Optional)
Modulation Mode: ASK
Working Voltage: DC 12V
Quantity: 1 Pc
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Includes:
1 x Remote Co
Xem thêm
#TOP 11
bộ điều
bộ điều chỉnh tốc độ
Bộ Công Tắc Điều Khiển Từ Xa Không Dây 4 Kênh Dc 12v 433mhz
Mô tả
Features:
It has 4 relays which can make the equipment turn or reverse, on/off and so on come true.
Strong signal which can pass through walls, floors and doors, control receiver from any place within a reliable distance.
The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from like auto door, window, lifting equipment, entrance access, to security etc.
It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control.
Specification:
Condition: 100% Brand New
Input Voltage: DC10-14V
Standby Current: <5MA
RF Frequency: 433MHZ
RF Working Mode: Super heterodyne receiver
Receiver Sensitivity: >98dBm
Remote Control Distance: >100 meter(in open environment)
Decoding Way: MCU Software decoding
Can store the number of remote control: 50
Support remote control type: Fixed code, learning code
Channel: 4CH
Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
Wiring Method: Fixed wiring terminal
Working Voltage: DC12V
Output Current: 10A
Output: Normally open, Common, Normally closed
Product Size: Approx. 50 * 70 * 25mm / 2.0 * 2.8 * 1.0inch
Package Weight: Approx. 100g
Package Included:
1 x Wireless Relay Switch
1 x Remote Controller
How to use:
1. Jog/Non-latched: Press one button is working /ON. Loosen your finger on the same button is stop/OFF. One channel switch need one buttons remote control.
2. Self -lock/Self-latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
Note:
The color of 4 relays is random(black or blu
Xem thêm
#TOP 12
bộ điều
bộ điều chỉnh dòng điện
Bộ Tiếp Nhận Điều Khiển Từ Xa Rf 4 Kênh 12v 4ch
Mô tả
Description:
Control Lights, TV, Motors, Fans, Cameras, Video Signals, Audio Signals, Electric Doors/Locks/Windows/Curtains/Cars or Other Appliances
4 Relays which can make the equipment turn or reverse, on/off and so on come true
The volume is small and the performance is stable and reliable, high receive sensitivity
With the functions of controlling household appliances remotely, setting time on phone,
delaying switch, etc
You can use wireless remote control, even without wifi
Specification:
Jog/Self-lock/Interlock can be switched as you choose, after the complete settings of the mode, it would not change, even if the module power off and restart
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control)
Self-lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control)
Inter-lock: Any channel works, the other three would be closed
With the function of 433M wireless remote control study, the switch can compatible 2260/2262/2264/1527 and other chip several code wireless remote control
WIFI phone APP remote intelligent control: after the pairing of the phone and module, the infinite distance control can be realized
Working Voltage: 11-12.5V
Working Current: Approx. 130mA ( relay closed )
Quiescent Current: Approx. 8mA ( relay released )
Receive Distance: 10-30m( can pass through wall )
Frequency: 433mhz
Receiver Size: 62x53x22mm/ 2.44x2.09x0.87inch( with 3mm fixing hole )
Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully
Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed
Package Includes:
1 x Remote Control
1 x Receiver
Note:
Battery is Not included
Please allow 1-3mm error due to manual measurement, make sure you do not mind before you bid
The colors may be different for the different display, please unders
Xem thêm
Công tắc RF 30A, 220V, 12V - 80V Bộ điều khiển từ xa công suất 3000W, RF 433 MHz học lệnh 4 chế độ.
Mô tả
Bộ công tắc điều khiển từ xa công suất cao dùng để điều khiển đóng ngắt thiết bị điện từ xa như: đèn, quạt, máy bơm nước, với công suất tải tối đa 3000W hoặc có dòng khởi động tối đa 30A
Sản phẩm có 2 loại: loại dùng điện 100~220V và loại dùng điện 12~80V
Điều khiển tắt mở thiết bị điện từ xa bằng sóng vô tuyến (radio), có thể đi qua các vật cản (vách ngăn, tường nhà)
Mạch nhận và điều khiển được mã hóa với IC cao cấp tránh nhầm lẫn
Công tắc có thể học lệnh nên khi mất remote có thể mua remote khác để sử dụng
Đóng ngắt bằng rơ le cho độ bền cao
Tầm xa điều khiển lên tới 100m ~ 150m với môi trường mở
Tầm xa điều khiển lên tới 30 ~ 50m với môi trường nhiều vật cản (phụ thuộc điều kiện môi trường: độ ẩm, nhiệt độ, nhiễu sóng...)
~~~~~
THÔNG SỐ KỸ THUẬT:
+ Nguồn điện: 100~250V hoặc 12~80V
+ Công suất chịu tải: max 3000W 30A
+ Điểu khiển bằng sóng RF 433MHz
~~~~~
HƯỚNG DẪN SỬ DỤNG
Để xoá hết các lệnh đã học, bấm nút trên bộ công tắc 8 lần, đèn LED nháy liên tiếp 4 lần là xoá thành công.
Có 3 chế độ hoạt động:
+ Chế độ nhấn nhả (bấm giữ nút mạch ON, nhả tay ra mạch OFF): Bấm nút trên mạch 1 lần, đèn LED sáng liên tục >> bấm phím cần học trên tay phát >> LED nháy 3 lần >> học thành công.
+ Chế độ nhấn giữ trạng thái (bấm nút mạch ON, bấm một lần nữa mạch OFF): Bấm nút trên mạch 2 lần, đèn LED sáng liên tục >> bấm phím cần học trên tay phát >> LED nháy 3 lần >> học thành công.
+ Chế độ 2 phím Tắt-Bật riêng biệt (Bấm nút A mạch ON, bấm nút B mạch OFF): Bấm nút trên mạch 3 lần, đèn LED sáng liên tục >> bấm phím cần học lệnh ON >> đèn LED nháy 3 lần rồi tiếp tục sáng liên tục >> bấm phím cần học lệnh OFF >> LED nháy 3 lần >> học thành công.
~~~~~
Sản phẩm có các tuỳ chọn sau:
1. Mạch +Tay khiển 220V: Gồm 1 Mạch thu AC220V + 1 điều khiển RF
2. Mạch + Khiển 12V-80V: Gồm 1 Mạch thu DC/AC 12V-80V + 1 điều khiển RF
3. Mạch thu 220V: Gồm 1 mạch thu AC220V
4. Mạch thu 12V-80V: Gồm 1 mạch thu DC/AC 12V-80V
5. Tay khiển 2 nút 433: Gồm 1 điều khiển RF 433MHz 2 nút như hình
Nếu có thắc mắc hãy nhắn tin cho Shop với tính năng Chat trên Shopee.
~~~~~
QUY ĐỊNH ĐỔI TRẢ - BẢO HÀNH
Shop cam kết sản phẩm bán ra đúng như mô tả.
Quý khách nhận hàng vui lòng quay video quá trình mở hộp và test sản phẩm lần đầu. Shop chỉ xử lý những trường hợp khách hàng có video.
Thời gian bảo hành - đổi trả được tính từ ngày khách nhận hàng.
Nếu sản phẩm có vấn đề bạn hãy liên hệ ngay với shop để shop hỗ trợ từ xa. Shop hỗ trợ kĩ thuật và sửa chữa dù sản phẩm đã hết bảo hành.
#linh #kien #module #dien #tu #thong #minh #smart #cam #bien #nha #thong #minh #tu #dong #hen #gio #Google #home #alexa #HASS #homekit
#cong #tac #dieu #khien #tu #xa #RF #220V #3000W #30A #hoc #lenh
Xem thêm
Bộ Điều Khiển Cảm Biến Nhiệt Độ 220V 10A Kỹ Thuật Số
Mô tả
CÔNG TẮC CẢM BIẾN NHIỆT ĐỘ XH-W3001 220V
Công tắc cảm biến nhiệt độ XH-W3001 sử dụng trong các ứng dụng khống chế nhiệt độ sẽ bật thiết bị làm lạnh (hoặc làm nóng) khi nhiệt độ đo được đến ngưỡng bật, và tự động tắt thiết bị làm lạnh và bật thiết bị làm nóng khi nhiệt độ dưới ngưỡng bật 1 khoảng độ tùy chỉnh và luôn phiên giữ nhiệt độ trong khoảng mong muốn. Ứng dụng cho nhiều trường hợp như kiểm soát nhiệt độ trong nhà vườn, nhà kính, bể cá, tưới tiêu, van xả tự động, v.v…
Sản phẩm có 2 phiên bản 12V và 220V phù hợp với nhu cầu khác nhau của khách hàng.
Công tắc cảm biến nhiệt độ XH-W3001 được ứng dụng trong nông nghiệp (trồng hoa, rau, cây cảnh) và chăn nuôi (máy ấp trứng).
Công tắc cảm biến nhiệt độ XH-W3001 tự động tắt mờ thiết bị, máy phun sương, máy bơm nước, thiết bị làm mát, tạo độ ẩm.
Đối với người trồng hoa, trồng cây cảnh hay rau, việc đảm bảo mức nhiệt độ và độ ẩm phù hợp là mối quan tâm hàng đầu. Nhiệt độ lên quá cao, đất và không khí thiếu độ ẩm sẽ làm cây khô héo không sinh trưởng được.
Công tắc cảm biến nhiệt độ là thiết bị được các chủ vườn sử dụng để đảm bảo nhiệt độ và độ ẩm cho vườn cây luôn ở mức lý tưởng. Công dụng của chiếc công tắc này là tự động tắt mở thiết bị theo cảm biến nhiệt độ. Ví dụ khi nhiệt độ vượt quá mức cho phép, công tắc tự động bật máy phun sương, máy bơm nước, thiết bị làm mát, thiết bị tạo độ ẩm. Việc đảm bảo mức nhiệt hợp lý cho vườn cây hoàn toàn được tự động hóa, giải phóng bớt công sức cho người làm vườn.
XH-W3001 – 220V dùng cho thiết bị tải trở dưới 1.500W, thiết bị tải dung dưới 300W.
Đối với tất cả trường hợp vượt quá giới hạn cho phép trên đều dẫn đến tình trạng không hoạt động hoặc cháy nổ. Trường hợp này nhà bán hàng không hỗ trợ đổi trả hay bảo hành.
Thanh toán khi nhận hàng (COD)
CAM KẾT CHÍNH HÃNG 100%
CAM KẾT GIỐNG HÌNH 100%
ĐỔI HÀNG TRONG 3 NGÀY
MỌI THÔNG TIN CHI TIẾT XIN VUI LÒNG LIÊN HỆ
Hotline: 0936693387 hoặc 0913713387
Địa chỉ: Số 2B, ngõ 187 Mai Dịch, Cầu Giấy, Hà Nội
Website: alengkeng.com
Fanpage: fb.com/alen
Xem thêm
Bộ Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh 200m+2 Đầu Thu
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
2 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
Công tắc điều khiển từ xa không dây RF 433mhz DC 12V 4CH 4 kênh Công tắc điều khiển từ xa không dây Rơle 2 Bộ thu Mô-đun
Mô tả
Chức năng:
Đó là một công tắc học tập điều khiển từ xa không dây (máy thu), cách đầu ra / cách làm việc có thể được thay đổi theo ý muốn, rất dễ dàng để phù hợp với máy phát. Nó có 4 Rơle có thể làm cho thiết bị quay hoặc đảo ngược, bật / tắt và như vậy trở thành sự thật. Âm lượng nhỏ và hiệu suất ổn định và đáng tin cậy, độ nhạy thu cao.
Nó bao gồm các ứng dụng từ điều khiển từ xa trong nước đơn giản đến điều khiển tự động, như cửa tự động, cửa sổ, thiết bị nâng, truy cập lối vào, bộ điều khiển lên xuống, hệ thống báo động điều khiển công nghiệp và an ninh, v.v.
Các điều khiển từ xa này được thiết kế để điều khiển nhiều loại thiết bị điện tử có tín hiệu không dây.
Vô cùng dễ dàng để thiết lập và sử dụng.
Tương thích với chip 2262/2260/1527/2240 vv và một số mã điều khiển từ xa không dây. Vì vậy, nó có thể đáp ứng nhu cầu của ai đó về việc chọn điều khiển từ xa không dây khi họ muốn làm việc với nó.
Hướng dẫn:
Nhấn mã học tập, đèn flash chỉ báo, nới lỏng ngón tay của bạn, nhấn bất kỳ nút nào của điều khiển từ xa, đèn báo nhấp nháy 2 lần và tắt, điều đó có nghĩa là bạn học nó thành công.
Nó có thể học được nhiều hơn 12 chip 2262 hoặc 1527 với điều khiển từ xa không dây mã khác nhau.
loại bỏ / làm sạch: nhấn nút học khoảng 8 giây, chỉ báo bật tắt, điều đó có nghĩa là thông tin bạn giữ đã được xóa thành công.
Cách làm việc đầu ra:
Tự khóa: kết nối JP1 với nắp cắt
Chạy bộ: giới hạn không phải là nghề nghiệp, JP1 và JP2 cũng không kết nối.
Khóa liên động: Kết nối Jp2 với nắp Cắt ra,
Chạy bộ: nhấn một nút là BẬT, nới lỏng ngón tay của bạn trên cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Tự khóa: nhấn một nút trong một lần là BẬT, nhấn lại cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Khóa liên động: nhấn một nút là BẬT, nhấn nút khác là TẮT (cần một công tắc kênh và 2 nút điều khiển từ xa)
Đặc tính:
Người nhận:
Điện áp làm việc: PCB
Điều kiện không hoạt động: Dưới 6mA
Nhiệt độ làm việc: -30 ° c + 70 ° c
Độ nhạy thu: hơn -105dBm
Tần số làm việc: 315MHZ / 433MHZ
Điện áp đầu ra: DC và AC là tùy chọn
Dòng điện đầu ra: Nhỏ hơn 3A
Tải tối đa hiện tại: 10A
Kích thước: khoảng. 110 * 72 * 33mm
Máy phát điều khiển từ xa:
Khoảng cách từ xa: 200M
Điện áp hoạt động: DC 12V
Tần số: 315MHZ / 433MHZ
Hoạt động hiện tại: 13 mAh
Loại mã: Mã cố định / Mã học tập
Kích thước: khoảng. 53 * 33 * 23mm
Pin thích hợp cho handsender: Nút Pin
Ghi chú:
Vui lòng cho phép sai số 1-5mm do đo thủ công
Màu mục hiển thị trong ảnh có thể hiển thị hơi khác trên màn hình máy tính của bạn do màn hình không được hiệu chỉnh giống nhau
Gói bao gồm:
2 x Máy phát
1 x Nhận
Không có hộp bán lẻ. Đóng gói an toàn trong túi bong
Xem thêm
#TOP 17
bộ điều
bộ điều chỉnh tốc độ motor
Bộ Điều Khiển Từ Xa 433 Mhz 3000m 1 / 2 / 4 / 6 / 8 / 12 nút bấm Rf
Mô tả
Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày
Mô tả:
Đặc điểm:
Sản phẩm mới 100% và chất lượng cao.
Xin hãy lưu ý:
Điều này không phải để sao chép trực diện hoặc sao chép hoặc nhân bản.
Sản phẩm chỉ là một bộ điều khiển từ xa (bộ phát) RF thông thường, vì vậy chỉ những người chuyên nghiệp mới có thể mua sản phẩm một mình hoặc những người mua bộ thu chuyển đổi từ xa của chúng tôi, sau đó cần bộ phát bổ sung.
Nếu bạn là người mới về hệ thống điều khiển từ xa RF, vui lòng mua điều khiển từ xa nhân bản / nhân bản / sao chép.
Chúng tôi rất bất lực về việc những người không hiểu thì thấy rẻ và mua, khi khách hàng nhận được và nói với chúng tôi rằng nó không hoạt động với mã lăn của anh ta hoặc đầu thu khác ... và phản hồi tiêu cực cho chúng tôi.
Thông tin sản phẩm:
Chất liệu: Nhựa + Kim loại
Màu xám
Kích thước: 159 × 43 × 25mm / 6.26 × 1.69 × 0.98in (Xấp xỉ)
Loại: 1 #: 1 Nút; 2 #: 2 Nút; 3 #: 4 Nút; 4 #: 6 Nút; 5 #: 8 Nút; 6 # 12 nút (Tùy chọn)
Kênh: 1/2/4/6/8/12 CH (Tùy chọn)
Khoảng cách điều khiển từ xa: 0-3000m (Khoảng cách lý tưởng mà không có bất kỳ khối và tín hiệu nào cản trở, nó sẽ tăng và giảm khoảng 10% -90% với khối và nhiễu tín hiệu.)
Mã hóa: 2262
Tần số: 433 MHz
Nguồn điện: Pin DC 9V (KHÔNG bao gồm)
Dòng điện chờ: 0mA
Cường độ dòng điện làm việc:> 80mA
Hệ thống điều chế: ASK
Nhiệt độ làm việc: -10 ℃ ~ + 70 ℃
Số lượng: 1 cái (không bao gồm các phụ kiện khác demo trong hình)
Lưu ý:
1. Đơn vị chuyển đổi: 1 cm = 10 mm = 0.39 inch
2. Xin vui lòng cho phép 0-1cm lỗi do đo lường thủ công. Xin hãy chắc chắn rằng bạn không phiền trước khi bạn đặt mua
3. Do sự khác biệt giữa các màn hình khác nhau, hình ảnh có thể không phản ánh màu sắc thực tế của sản phẩm. Cảm ơn bạn!
Gói hàng bao gồm:
1 X Bộ phát điều khiển từ xa (Không bao gồm pin) (Không có gói bá
Xem thêm
Bộ Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh 200m + 2 Đầu Nhận
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Material: Plastic, metal
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
2 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
BỘ CÔNG TẮC ĐIỀU KHIỂN TỪ XA 12V 4 KÊNH CHO 4 THIẾT BỊ DÙNG CHO XE MÁY Ô TÔ LOẠI TỐT
Mô tả
Thường được các thợ xe dùng làm khóa chống trộm điều khiển tắt mở xe từ xa mà không cần dùng chìa khóa hoặc bỏ hẳn chìa - bật tắt đèn trợ sáng hay các thiết bị khác trên xe
Thường sử dụng làm khóa chống trộm xe máy hoặc bật tắt các thiết bị trên xe bằng điều khiển từ xa siêu tiện và an toàn
Mạch có 3 chế độ hoạt động: chuyên được lắp đặt cho anh em Bike độ lên xe máy hoặc ô tô và các thiết bị khác
1: chế độ nút nhấn ( role tự nhả): khi nhấn remote role đóng, thảremote role nhả ra. Măc định, không nối jumper trên mạch để chọn chếđộ này
2: chế độ on/off 1 nút: nhấn nút A trên remote thì role đóng, nhấn lầnnữa thì role nhả. Chọn bằng cách nối jumber 2 và 3
3: Chế độ on/off 2 nút: nhấn nút A trên remote role đóng, nhấn nút Brole nhả. Chọn chế độ này bằng cách nối jumber chân 1 và 2 lại với nhau
Để học lệnh bạn nhấn giữ nút học lệnh khi đèn led sáng thì bỏ ra vàbấm nút remote để học lệnh, có thể học lệnh của nhiều remote để nhiềungười sử dụng
Để xóa hết các lệnh đã học nhấn giữ nút học lệnh đến khi đèn đỏ nháy 3lần thì bỏ ra. tất cả lệnh sẽ bị xóaMạch sử dụng điện áp 12V
Công suất đóng cắt mỗi kênh 300W
Có 3 chức năng, chốt, nhấn nhả, đảo
Có vỏ hộp bảo vệ mạch an toàn
Sử dụng tần số 315Mhz, học lệnh
Mạch điều khiển từ xa 4 kênh
Đối với mạch xài điện 12v
Điều khiển 1 thiết bị độc lập
Tải role tối đa 10A
Ngay sau khi quý khách đặt hàng Bên shop luôn có đội ngũ nhân viên chuyên nghiệp kiểm tra tex thử sản phẩm và đóng gói cẩn thận đảm bảo hàng đến tay quý khách luôn đảm bảo chất lượng tốt và đầy đủ phụ kiện kèm theo
Bảo hành lên đến : 12 tháng
BỘ SẢN PHẨM GỒM : CHỌN THEO PHÂN LOẠI KHI ĐẶT HÀNG ( loại 4 kệnh gồm 1 mạch có 4 rowle + 1 hộp nhựa + 2 điều khiển , loại 1 kênh gồm mạch có 1 role + 1 hộp nhựa + 1 điều khiển )
CẢM ƠN CÁC BẠN ĐÃ QUAN TÂM MUA SẮM CÁC SẢN PHẨM CỦA CHÚNG TÔI :
SỰ HÀI LÒNG CỦA CÁC BẠN CHÍNH LÀ THÀNH CÔNG CỦA CHÚNG TÔI
HÃY ĐẾN VỚI CHÚNG TÔI VÌ LỢI ÍCH CỦA BẠN
Nhận hàng nếu các anh em không hài lòng về sản phẩm liên hệ trực tiếp shop để được đổi trả vô điều kiện ( không thích sẽ được đổi trả ) chỉ có tại
Xem thêm
Bộ Truyền Tín Hiệu Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh Rf 200m
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
1 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
✅BỘ CÔNG TẮC ĐIỀU KHIỂN TỪ XA 4 KÊNH 433mhz 12v 10A.REMOTE 4 KÊNH
Mô tả
Thông tin chi tiết:
Sản phẩm mới
Điện áp: DC 12V
Kênh: 4 kênh
Tần số: 433MHZ
Màu sắc: Như hình ảnh hiển thị
Tích hợp nút điều khiển từ xa (bao gồm)
Thiết bị thu:
Điều kiện không hoạt động: dưới 6mA
Nhiệt độ hoạt động: -40 + 39oC
Độ nhạy bộ thu: hơn -105dBm
Điện áp đầu ra: DC và AC tùy chọn
Kích thước: khoảng. 72mm * 52mm * 26mm
Máy phát điều khiển từ xa:
Khoảng cách từ xa: 100M
Dòng điện hoạt động: 13 mAh
Loại mã: Code cố định / Code lập trình
Kích thước: khoảng. 58 * 39 * 14mm
Đặc trưng:
Một công tắc lập trình điều khiển từ xa không dây (bộ thu), cách đầu ra / cách hoạt động có thể được thay đổi theo ý muốn, rất dễ dàng để phù hợp với máy phát. Có 4 Rơle có thể làm cho thiết bị quay hoặc đảo ngược, có công tắc bật / tắt. Âm lượng nhỏ và hiệu suất ổn định, đáng tin cậy, độ nhạy bộ thu cao.
Bao gồm các ứng dụng từ điều khiển từ xa đơn giản đến điều khiển tự động, như cửa tự động, cửa sổ, thiết bị nâng, lối vào, bộ điều khiển lên xuống, hệ thống báo động điều khiển công nghiệp và an ninh, v.v.
Các điều khiển từ xa này được thiết kế để điều khiển nhiều loại thiết bị điện tử có tín hiệu không dây.
Vô cùng dễ dàng để thiết lập và sử dụng.
Tương thích với chip 2262/2260/1527/2240 v.v và một số mã điều khiển từ xa không dây. Có thể đáp ứng nhu cầu việc chọn điều khiển từ xa không dây khi họ muốn sử dụng.
Hướng dẫn sử dụng:
Điều khiển từ xa lập trình nút nhấn, đèn báo flash, nới lỏng ngón tay của bạn, nhấn bất kỳ nút nào của điều khiển từ xa, đèn báo nhấp nháy 2 lần và tắt, điều đó có nghĩa là bạn nhấn nút thành công.
có thể học nhiều hơn 12 chip 2262 hoặc 1527 với điều khiển từ xa không dây mã khác nhau.
Loại bỏ / làm sạch: nhấn nút khoảng 8 giây, chỉ báo bật tắt, điều đó có nghĩa là thông tin bạn giữ đã được xóa thành công.
Cách hoạt động đầu ra:
Tự khóa --- kết nối JP1 với nắp cắt.
Jog--- nắp cắt không cố định, JP1 và JP2 cũng không kết nối.
Khóa liên động ---- Kết nối Jp2 với nắp cắt,
Jog---- nhấn một nút là BẬT, nới lỏng ngón tay của bạn trên cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Tự khóa ----- nhấn một nút trong một lần là BẬT, nhấn lại cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Nhấn khóa------- ------- nhấn một nút là BẬT, nhấn nút khác là TẮT (cần một công tắc kênh và 2 nút điều khiển từ xa).
Gói hàng bao gồm:
1 x Công tắc
1 x Đầu thu (có
Xem thêm
Bộ điều khiển từ xa 4 kênh 100m 12V
Mô tả
Thông số kĩ thuật:
Điện áp nuôi mạch: 12V
Công suất đầu ra: Dạng tiếp điểm 10A
Tầm xa hoạt động: 100m
Học lệnh:
Xem thêm
#TOP 23
bán bộ điều khiển
bộ điều
Bộ truyền tín hiệu điều khiển từ xa DC 12V 4 kênh RF 200m + thiết bị thu nhận
Mô tả
Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày
Đầy là một công tắc học tập điều khiển từ xa không dây (đầu thu), đầu ra / đầu hoạt động có thể được thay đổi theo ý muốn, rất dễ phù hợp với máy đầu thu phát.
Có 4 Rơle có thể làm cho thiết bị quay hoặc đảo ngược, có thể điều chỉnh bật / tắt thực tế. Âm lượng nhỏ và hiệu suất ổn định và an toàn, độ nhạy đầu thu cao.
Sử dụng cho các ứng dụng điều khiển từ xa trong nước đơn giản đến điều khiển tự động, như cửa tự động, cửa sổ, thiết bị nâng, truy cập lối vào, bộ điều khiển lên xuống, hệ thống báo động điều khiển công nghiệp và an ninh, v.v.
Các điều khiển từ xa này được thiết kế để điều khiển nhiều loại thiết bị điện tử có tín hiệu không dây. Vô cùng dễ dàng để thiết lập và sử dụng.
Tương thích với chip 2262/2260/1527/2240 v.v và một số mã điều khiển từ xa không dây. Vì vậy, có thể đáp ứng nhu cầu của ai đó về việc chọn điều khiển từ xa không dây khi họ muốn sử dụng .
Màu sắc: Như hình ảnh hiển thị
Đầu thu:
điện áp hoạt động: PCB
điều kiện không hoạt động: ít hơn 6mA
nhiệt độ hoạt động: -40 - +80 độ C.
độ nhạy thu: hơn -105dBm
tần số hoạt động: 315 MHz
trong thiết lập. chúng tôi đã làm cho các linh kiện hoạt động cùng nhau, vì vậy bạn không cần phải quan tâm đến tần suất của chúng.
điện áp đầu ra: DC và AC là tùy chọn
dòng điện đầu ra: nhỏ hơn 3A
cường độ dòng điện tải tối đa: 10A
Kích thước: 72mm * 52mm * 26mm
Máy phát điều khiển từ xa:
Khoảng cách từ xa: 200M
Điện áp hoạt động: DC 12V
Tần số: 315mhz
Cường độ dòng điện hoạt động: 13 mAh
Loại mã: Mã cố định / Mã kỹ thuật
Kích thước: 58 x 39 x 14mm
Cách kích hoạt đầu ra:
Tự khóa --- kết nối JP1 với nắp cắt.
Lắc nhẹ --- nắp cắt không phải là nghề nghiệp, JP1 và JP2 cũng không kết nối.
Khóa liên động --- Kết nối Jp2 với nắp cắt ra,
Lắc nhẹ --- nhấn một nút là BẬT, nới lỏng ngón tay của bạn trên cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Tự khóa --- nhấn một nút trong một lần là BẬT, nhấn lại cùng một nút là TẮT (cần một công tắc kênh và một nút điều khiển từ xa).
Khóa liên --- nhấn một nút là BẬT, nhấn nút khác là TẮT (cần một công tắc kênh và 2 nút điều khiển từ xa).
Gói hàng bao gồm:
1 x Bộ truyền tín hiệu
1 x Đầu thu
Lưu ý: Do ánh sáng chụp ảnh và màn hình khác nhau có thể khiến màu sắc của sản phẩm trong ảnh hơi khác so với thực tế. Sai số kích thước cho phép là +/- 1-
Xem thêm
Bộ Truyền Tín Hiệu Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh Rf 200m
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
1 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
#TOP 25
bán bộ điều khiển
bộ điều
Bộ Công Tắc Điều Khiển Từ Xa Không Dây 12v 4 Kênh 433mhz Kèm 2 Bộ Phát Tín Hiệu Thay Thế Diy
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc. 2. These remote controls are designed to control a wide variety of electronic devices with a wireless signal.
3. Extremely easy to set up and use. 4. Compatible with 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully .
It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control. remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully.
Output working way:
1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap,
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Receiver:
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40~+80 Celsius
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
9. Dimensions: 72 x 52 x 26mm
10. The wires on the PCB are random (Black or White) by sent
Remote control transmitter:
1. Remote Distance: 200M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
6. Dimensions: 58 x 39 x 14mm
7. Used battery type: 2016 button battery
Package included:
2 x Transmitter
1 x Receiver
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Xem thêm
Bộ Công Tắc Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh 200m + 2 Đầu Nhận
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Material: Plastic, metal
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
2 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
#TOP 27
bộ điều
bộ điều chỉnh tốc độ
Bộ công tắc RF 10A,12V Bộ điều khiển từ xa thu RF 2 tiếp điểm Relay 10A RF 433 MHz học lệnh 3 chế độ học lệnh
Mô tả
Bộ công tắc điều khiển từ xa công suất cao dùng để điều khiển đóng ngắt thiết bị điện từ xa như: đèn, quạt, máy bơm nước, hoặc sử dụng làm đóng mở khóa xe máy
Sản phẩm chỉ sử dụng nguồn 12V, có chống ngược nguồn. relay tiếp điểm độc lập ra đủ 3 chân có thể điều khiển thiết bị 12V hoặc 220v tùy mục đích sử dụng.
Điều khiển tắt mở thiết bị điện từ xa bằng sóng RF, có thể đi qua các vật cản (vách ngăn, tường nhà)
Mạch nhận và điều khiển được mã hóa 24 bit không lo điều khiển lẫn giữa các thiết bị với nhau.
Công tắc có thể học lệnh dễ dàng bằng nút nhấn trên mạch, có thể học được đồng thời nhiều điều khiển và nhiều chế độ chạy song song cực thuận tiện. Bạn có thể mua thêm tay phát để sử dụng cùng với bộ thu.
Tầm xa điều khiển lên tới 100m với điều khiển đi kèm trong điều kiện lý tưởng. bộ thu và tay phát không có vật cản.
Tầm xa điều khiển lên tới 30 ~ 50m trong điều kiện thực tế.
Nếu cần khoảng cách điều khiển xa hơn bạn có thể thay thế bằng điều khiển công suất cao hơn
~~~~~
THÔNG SỐ KỸ THUẬT:
+ Nguồn điện: 12V
+ Công suất chịu tải: max 30A
+ Điểu khiển bằng sóng RF 433MHz
+ Dòng hoạt động không tải 5mA (relay mở) và 20mA relay đóng
+ Tay phát sử dụng 2 pin CR2016
~~~~~
HƯỚNG DẪN SỬ DỤNG
Để xoá hết các lệnh đã học, bấm nút trên bộ công tắc 8 lần hoặc nhấn giữ phím, đèn LED nháy liên tiếp 4 lần là xoá thành công.
Có 3 chế độ hoạt động:
+ Chế độ nhấn nhả (bấm giữ nút mạch ON, nhả tay ra mạch OFF): Bấm nút trên mạch 1 lần, đèn LED sáng liên tục >> bấm phím cần học trên tay phát >> LED nháy 3 lần >> học thành công.
+ Chế độ nhấn giữ trạng thái (bấm nút mạch ON, bấm một lần nữa mạch OFF): Bấm nút trên mạch 2 lần, đèn LED sáng liên tục >> bấm phím cần học trên tay phát >> LED nháy 3 lần >> học thành công.
+ Chế độ 2 phím Tắt-Bật riêng biệt (Bấm nút A mạch ON, bấm nút B mạch OFF): Bấm nút trên mạch 3 lần, đèn LED sáng liên tục >> bấm phím cần học lệnh ON >> đèn LED nháy 3 lần rồi tiếp tục sáng liên tục >> bấm phím cần học lệnh OFF >> LED nháy 3 lần >> học thành công.
~~~~~
Sản phẩm có các tuỳ chọn sau:
1. Bộ thu + tay phát on/off: Gồm 1 mạch thu DC 12V (Có hộp nhựa) và 1 điều khiển rf đã có sẵn pin
2. Tay khiển 2 nút 433: Gồm 1 điều khiển RF 433MHz 2 nút như hình
3. Bộ thu RF 433 10A: Gồm 1 mạch thu DC 12V (Có hộp nhựa)
4. Vỉ 5 pin CR2016 chất lượng tốt dùng thay thế cho tay đều khiển.
~~~~~
QUY ĐỊNH ĐỔI TRẢ - BẢO HÀNH
Shop cam kết sản phẩm bán ra đúng như mô tả.
Quý khách nhận hàng vui lòng quay video quá trình mở hộp và test sản phẩm lần đầu. Shop chỉ xử lý những trường hợp khách hàng có video.
Thời gian bảo hành - đổi trả được tính từ ngày khách nhận hàng.
Nếu sản phẩm có vấn đề bạn hãy liên hệ ngay với shop để shop hỗ trợ từ xa. Shop hỗ trợ kĩ thuật và sửa chữa dù sản phẩm đã hết bảo hành.
#linh #kien #module #dien #tu #thong #minh #smart #cam #bien #nha #thong #minh #tu #dong #hen #gio #Google #home #alexa #HASS #homekit
#cong #tac #dieu #khien #tu #xa #RF #12V #10A #hoc #lenh
Xem thêm
Bộ Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh 200m + 2 Đầu Nhận
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Material: Plastic, metal
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
2 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
#TOP 29
bộ điều
bộ điều chỉnh tốc độ
Bộ Truyền Tín Hiệu Điều Khiển Từ Xa Không Dây Dc 12v 4 Kênh Rf 200m
Mô tả
It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable and reliable, high receive sensitivity.
It covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.
These remote controls are designed to control a wide variety of electronic devices with a wireless signal. Extremely easy to set up and use.
Compatible with 2262 /2260/1527/2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .
Color: As shown
Receiver:
working voltage:DC12V
quiescent condition:less than 6mA
working temperature: -40 - +80 Celsius
receiver sensitivity: more than -105dBm
working frequency:315MHz
here is in set. we have made it work together,so you don't have to care about what frequency are they.
output voltage:DC and AC is optional
output current: less than 3A
max load current:10A
Dimensions: 72mm*52mm*26mm
Remote control transmitter:
Remote Distance: 200M
Operating Voltage: DC 12V
Frequency: 315mhz
Operating Current: 13 mAh
Code Type: Fixed code / Learning code
Dimensions: 58 x 39 x 14mm
Output working way:
Self-lock --- connect the JP1 with the cutting out cap.
Jog --- the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
Inter-lock --- Connect the Jp2 with the Cutting out cap,
Jog --- press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self-lock --- press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock --- press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Package include:
1 x Transmitter
1 x Receiver
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-
Xem thêm
Rơ Le Không Dây 12v 4 Kênh Điều Khiển Từ Xa Kèm 2 Bộ Thu Phát
Mô tả
#12V #4CH #Channel #Relay #Wireless #RF #Remote #Control #Switch #2 #Transmitter+Receiver
12V 4CH Channel Relay Wireless RF Remote Control Switch 2 Transmitter+Receiver
Description:
100% brand new and high quality
Remote Control Distance: 100 meter(open/ideal) in theory, 10%-50% in reality(In open environment)
Encode: Fixed code, soldering
Frequency: 433 mHZ
Channel: 4 CH
Power Supply: DC 12V
Relay: DC 12V
Quiescent Current: 8mA
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity:-105 dBm
Operating Temperature:-40℃~80℃
Receiver Size: 68mm x 47mm x 17mm/2.65’’ x 1.83’’ x 0.66’’(approx)
Material:Plastic
Color:Black+White
Quantity: 1 set
Control Mode:
1. Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2. Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3. Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
Learn code and Remove Code:
1.Learn:Press the learning code . The indicator from 'on' to 'off' , loosen your finger, press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .it can learn more than 12 PCS 2260/2262 chip with the different code wireless remote control.
2.Remove :press the learning button about 8 seconds , the indicator turn on to off , it means the Code had been removed successfully.
Note:
No retail package.
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 X Receiver
2 X Transmitter (Battery inc
Xem thêm
bộ điều khiển từ xa 4 kênh 12v
Viết bởi
Thiều Hoa được biết đến là thương hiệu Thời trang nữ – Thời trang trung niên, được ra đời bắt nguồn từ sự hiếu thảo của anh Kiệt – Nhà sáng lập Thiều Hoa. Ngay từ thời sinh viên khốn khó, anh đã ý thức được mong muốn của mình sẽ dành tặng cho mẹ những món quà thật ý nghĩa nhất trong dịp lễ Tết. Vì quanh năm mẹ chỉ lo lắng cho gia đình nên không có thời gian chăm chút cho việc ăn mặc. Nhưng tìm kiếm những thương hiệu có trang phục đảm bảo tiêu chí sang trọng và phù hợp với túi tiền anh thời đó thì thật sự rất khó.