Bme280

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Xin chào mọi người, chúng tôi là Reland Tech, chúng tôi chủ yếu tham gia vào các linh kiện điện tử, dụng cụ điện tử, sản phẩm làm bánh. Khách hàng có thể liên hệ với chúng tôi để biết thêm thông tin sản phẩm. Nếu có bất kỳ sự không hài lòng, bạn có thể để lại nhận xét cho chúng tôi. Chúng tôi sẽ chủ động sửa chữa, tất nhiên, cảm ơn lời đánh giá chân thành của

Cảm biến áp suất BME280-5V: cảm biến nhiệt độ, độ ẩm và áp xuất với độ chính xác cao sử dụng trong dự báo thời tiết, đo độ cao trong máy bay … Kích thước: 2,5 mm x 2,5 mm x 0,93 mm Giao diện số I2C (lên đến 3.4 MHz) và SPI (3 và 4 dây, lên đến 10 MHz) Dải đo áp suất: 300hPa ~ 1100hPa Công suất tiêu thụ thập: 1.8uA tại

Dear friends, what electronic components do you need to contact us? Many of our stocks are not on the shelf. We can contact us constantly in the process of updating. We can help you cooperate with all electronic components and integrated circ

Biến dòng TI cảm biến đo lường dòng điện loại : 100/5 , 200/5, 300/5, 500/5 Chất liệu : vỏ : nhựa chống cháy Lõi : cuộn đồng nguyên

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

description: 100% new high quality. color: as the picture shows introduction: bme280, the precision sensor from bosch, is soldered onto pcb. not only the pressure and the temperature. it uses both i2c and spi (supports 3-, 4-wire spi) interface specifications: supply voltage: 1.8 - 5v dc interface: i2c (up to 3.4mhz), spi (up to 10 mhz) operational range: temperature: -40 to +85°c pressure: 300-1100 hpa resolution: temperature: 0.01°c pressure: 0.18pa accuracy: temperature: +-1°c pressure: +-1pa package :1*bmp280 atmospheric pressure sensor temperature humidity sensor breakout spu:lio4183 if you want buy more than we listed, please contact us. There are so many useful and cheap item in our store. You can contact with us to get more detail of the goods . We are professional Shopee sell

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Mô đun cảm biến nhiệt kỹ thuật số BME280 mới Feuchtigkeit/ Bộ cảm biến Luftdruck I2C SPI 1.8-5 V GY-BME280 5V BME280, cảm biến chính xác, được hàn vào PCB. Không chỉ áp suất và nhiệt độ, cảm biến này có thể đo độ ẩm. Sử dụng cả I2C và SPI (hỗ trợ giao diện SPI 3, 4 dây) Chi tiết sản phẩm: Điện áp cung cấp: 1.8 - 5V DC Giao diện: I2C (lên đến 3,4MHz), SPI (lên đến 10 MHz) Phạm vi hoạt động: Nhiệt độ: -40 đến + 85 ° C Độ ẩm: 0-100% Áp suất: 300-1100 hPa Độ phân giải: Nhiệt độ: 0,01 ° C Độ ẩm: 0,008% Áp suất: 0,18Pa Sự chính xác: Nhiệt độ: + -1 ° C Độ ẩm: + -3% Áp suất: + -1Pa Chỉ số I2C SDO THẤP: 0x76 SDO CAO: 0x77 Gói hàng bao gồm: 1pcs * Mô đun cảm biến GY-BME280 5V

Decription: Features: BME280, the precision sensor from It, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Specifications: Supply Voltage: 1.8 - 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) Operational Range: Temperature: -40 to +85°C Humidity: 0-100% Pressure: 300-1100 hPa Resolution: Temperature: 0.01°C Humidity: 0.008% Pressure: 0.18Pa Accuracy: Temperature: +-1°C Humidity: +-3% Pressure: +-1Pa I2C address SDO LOW : 0x76 SDO HIGH: 0x77 Included: 1 x S

BEM280 technical parameters: Relative humidity range: 0-100% The temperature range is -40 ° C- + 85 ° C Humidity measurement response time: 1S Lag: relative humidity 2% Pressure range: 300-1100 hPa Absolute pressure accuracy: Absolute value ± 1hPa (after welding) Absolute temperature accuracy: ± 0.5 ° C (at 25 ° C) Communication interface: I2C, SPI Product parameters: Working voltage: D

� � � Liên hệ đặt hàng � � � � Hotline: 0868306306 hoặc để lại tin nhắn � Địa chỉ: Số 62 ngõ 61 Phạm Tuấn Tài, Bắc Từ Liêm, Hà Nội � Hỗ trợ ship hàng toàn quốc Cảm ơn các bạn đã ghé thăm và ủng hộ Điện Tử 360 #linh_kiện_điện_tử #phụ_kiện_điện_tử #điện_tử_360 #E

BME280, the precision sensor from , is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Specifications: Supply Voltage: 1.8 - 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) Operational Range: Temperature: -40 to +85°C Humidity: 0-100% Pressure: 300-1100 hPa Resolution: Temperature: 0.01°C Humidity: 0.008% Pressure: 0.18Pa Accuracy: Temperature: +-1°C Humidity: +-3% Pressure: +-1Pa I2C address SDO LOW : 0x76 SDO HIGH:

description: 100% new high quality. color: as the picture shows introduction: bme280, the precision sensor from bosch, is soldered onto pcb. not only the pressure and the temperature. it uses both i2c and spi (supports 3-, 4-wire spi) interface specifications: supply voltage: 1.8 - 5v dc interface: i2c (up to 3.4mhz), spi (up to 10 mhz) operational range: temperature: -40 to +85°c pressure: 300-1100 hpa resolution: temperature: 0.01°c pressure: 0.18pa accuracy: temperature: +-1°c pressure: +-1pa package :1*bmp280 atmospheric pressure sensor temperature humidity sensor breakout spu:lio4183 Have a nice day! Welcome to visit.Hope you have a nice day! we will be ready to reply you ASAP. If you need more this item ,you can contact us.we will give you our best price. Leave your messa

description: 100% new high quality. color: as the picture shows introduction: bme280, the precision sensor from bosch, is soldered onto pcb. not only the pressure and the temperature. it uses both i2c and spi (supports 3-, 4-wire spi) interface specifications: supply voltage: 1.8 - 5v dc interface: i2c (up to 3.4mhz), spi (up to 10 mhz) operational range: temperature: -40 to +85°c pressure: 300-1100 hpa resolution: temperature: 0.01°c pressure: 0.18pa accuracy: temperature: +-1°c pressure: +-1pa package :1*bmp280 atmospheric pressure sensor temperature humidity sensor breakout spu:lio4183 Have a nice day! Welcome to visit.Hope you have a nice day! we will be ready to reply you ASAP. If you need more this item ,you can contact us.we will give you our best price. Leave your messa

===========================AGMa========================== Description: BME280, the precision sensor from Bosch, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Specifications: Supply Voltage: 1.8 - 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) Operational Range: Temperature: -40 to +85°C Humidity: 0-100% Pressure: 300-1100 hPa Resolution: Temperature: 0.01°C Humidity: 0.008% Pressure: 0.18Pa Accuracy: Temperature: +-1°C Humidity: +-3% Pressure: +-1Pa Package Include:1*BME280 Atmospheric Pressure Sensor Temperature Humidity Sensor Bre

Dear friends, what electronic components do you need to contact us? Many of our stocks are not on the shelf. We can contact us constantly in the process of updating. We can help you cooperate with all electronic components and integrated circ

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! Brand yourcee Color classification gy-bme280-3.3v/sensor, gy-bme280-5v/se

GY-BME280-3.3 precision altimeter atmospheric pressure BME280 sensor module Description ME-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO. If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1! 🌈BME280 Features - Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA - Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz) - Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V VDDIO interface voltage range: 1.2 V to 3.6 V - Current consumption 1.8 uA @ 1 Hz humidity and temperature 2.8 uA @ 1 Hz pressure and temperature 3.6 uA @ 1 Hz humidity, pressure and temperature 0.1 uA in sleep mode - Operating range -40…+85 C, 0…100 % rel. humidity, 300…1100 hPa- Humidity sensor and pressure sensor can be independently enabled/disabled Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost, precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with ±1 meter accuracy The BME280 is the next-generation of sensors from Bosch, and is the upgrade to the BMP085/BMP180/BMP183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI. 🌈Before purchase: 1.All the goods are ready stock, we will arrange the shipment at once if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. 🌈Shipment： 1.1-2 days to ship(except for the pro-order item) and 10-15 days shipment. 🌈After purchase: 1.If you are satisfied，please give us 5 stars praise. #GY-BME280-3.3 #precision #altimeter #atmospheric #pressure #BME280 #sensor #module #3.3V #for #ar

Decription: Features: BME280, the precision sensor from It, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Specifications: Supply Voltage: 1.8 - 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) Operational Range: Temperature: -40 to +85°C Humidity: 0-100% Pressure: 300-1100 hPa Resolution: Temperature: 0.01°C Humidity: 0.008% Pressure: 0.18Pa Accuracy: Temperature: +-1°C Humidity: +-3% Pressure: +-1Pa I2C address SDO LOW : 0x76 SDO HIGH: 0x77 Included: 1 x S

Là cảm biến đo độ ẩm, áp suất khí quyển và nhiệt độ môi trường với chip tích hợp BME280 được phát triển bởi hãng BOSCH cho kết quả và độ chính xác cao. Thông số kỹ thuật: Điện áp: 1.7 - 3.6V Điện áp logic: 1.2 - 3.6V Cảm biến độ ẩm và cảm biến áp suất có thể enable/disable một cách độc lập. Nhiệt độ hoạt động: -40 - 85ºC Dải độ ẩm định mức: 0 - 100% Dải áp suất định mức: 300 - 1100hPa Thời gian đáp ứng: 1s Độ chính xác: ± 3% Độ trễ: ± 1% Tải về datasheet:http://www.embeddedadventures.com/datasheets/BME28

If you cannot find the product you need in my store, please contact me to upload it, thank you! If you cannot find the product you need in my store, please contact me to upload it, thank

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Cảm biến áp suất khí quyển nhiệt độ độ ẩm Bme280 cho Arduino Mô tả sản phẩm: BME280, cảm biến chính xác của Bosch, được hàn vào PCB. Không chỉ áp suất và nhiệt độ, cảm biến này có thể đo độ ẩm. Sản phẩm sử dụng cả I2C và SPI (hỗ trợ giao diện SPI 3, 4 dây) Thông tin chi tiết: Điện áp cung cấp: 1.8 - 5V DC Giao diện: I2C (lên đến 3,4MHz), SPI (lên đến 10 MHz) Phạm vi hoạt động: Nhiệt độ: -40 đến + 85 ° C Độ ẩm: 0-100% Áp suất: 300-1100 hPa Độ phân giải: Nhiệt độ: 0.01 ° C Độ ẩm: 0.008% Áp suất: 0.18Pa Sự chính xác: Nhiệt độ: + -1 ° C Độ ẩm: + -3% Áp suất: + -1Pa Gói hàng bao gồm: 1 * Cảm biến áp suất khí quyển nhiệt độ độ ẩm B

Decription: Features: BME280, the precision sensor from It, is soldered onto PCB. Not only the pressure and the temperature, this sensor can measure humidity. It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Specifications: Supply Voltage: 1.8 - 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) Operational Range: Temperature: -40 to +85°C Humidity: 0-100% Pressure: 300-1100 hPa Resolution: Temperature: 0.01°C Humidity: 0.008% Pressure: 0.18Pa Accuracy: Temperature: +-1°C Humidity: +-3% Pressure: +-1Pa I2C address SDO LOW : 0x76 SDO HIGH: 0x77 Included: 1 x S

Altimeter sensor module (Altitude)Temperature, humidity (Humidity), and atmospheric pressure (Atmospheric pressure). 4 functions in 1 super mini module. Specs: - altimeter: Measuring the altitude of the seawater (0-9.2km) accuracy - + 1m - 40 to 85 c temperature gage xtemperature range: - humidity: Xrange 0-100% humidity rate - atmospheric pressure meter: Measuring air pressure somewhere (range: 30,000pa - 110,000pa, accuracy 12pa) - digital interface i2c (up to 3.4 mhz) and spi mode 1.71 v to 5.5v vcc main voltage supply - vddio interface voltage: 1.2 v to 5 v - current consumption 1.8 ua @ 1 hz humidity and temperature - 2.8 ua @ 1 hz pressure and temperature - 3.6 ua @ 1 hz humidity, pressure and temperature - 0.1 ua in sleep mode. - work area - 40 to + 85 c, 0-100% rail. Humidity, 300 to; 110

Features: Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz) Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V VDDIO interface voltage range: 1.2 V to 3.6 V Current consumption 1.8 μA @ 1 Hz humidity and temperature 2.8 μA @ 1 Hz pressure and temperature 3.6 μA @ 1 Hz humidity, pressure and temperature 0.1 μA in sleep mode Operating range -40…+85 °C, 0…100 % rel. humidity, 300…1100 hPa Humidity sensor and pressure sensor can be independently enabled / disabled Register and performance compatible to Bosch Sensortec BMP280 digital pressure sensor RoHS compliant, halogen-free, MSL1 Key parameters for humidity sensor1 Response time 1 s Accuracy tolerance ±3 % relative humidity Hysteresis ±1% relative humidity Key parameters for pressure sensor RMS Noise 0.2 Pa, equiv. to 1.7 cm Offset temperature coefficient ±1.5 Pa/K, equiv. to ±12.6 cm at 1 °C temperature c

Description: Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V. Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz). VDDIO interface voltage range: 1.2 V to 3.6 V. A good replacement for the old module. Note: If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1! The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Specifications: Material: metal. Color: purple. Size: as picture shows. Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package include: 1 * GY-BME280-3.3 Module. kitchent

Let 's cultivate reading before buying Bme280 atmospheric pressure sensor module gy-bme28-3v3 precision altimeter Welcome to our store.. Please read our product description carefully, because we do not want to disappoint you as our customers. - auto ready stuff as long as you can click yes bro n 'sis or to make sure product stock please chat our cs, cs we' ll gladly return the custumer chat.. Description: Me-bme280 is a breakout board featuring a bosch sensortec me280 temperature, humidity & pressure sensor. If you connect board to both power rails vdd_io 1.8v and vdd 3.3v be sure to remove the power rail jumper gs1! Bme280 features - package 2.5mm x 2.5mm x 0.93mm metal lid lga 1.71 v to 3.6v voltage vdd main supply range Vddio voltage range interface: 1.2 v to 3.6 v - current consumption 1.8 ua @ 1 hz humidity and temperature 2.8 ua @ 1 hz pressure and temperature 3.6 ua @ 1 hz humidity, pressure and temperature 0.1 ua in sleep mode Note: We 've always done checks before we send them to you to make sure there' s no defect in the product and get to your hands in good shape. - fast response on monday - friday at 9: 00-17: 00, saturday at 9: 00-14: 00, sunday or holiday off - please list the color / image / variant of the selection and reserve (if any) in the booking column yes. If we don 't list the options, we' ll send them as ready stock!!! - payment less than 12 o 'clock straight in the yaa process and purchase over 12 o' clock in the process the next day. - if the message is empty and there 's no response for 1x24 hours then it' ll be delivered randomly. - recheck the phone number (phone) & full address. To speed up and smooth the shipment. - the goods that have been bought can 't be returned. - bro and sis are tardiness because the expedition trip is not our responsibility, please contact the nearest expedition. - please confirm as soon as the goods are received and don 't forget to give us 5th star. Your judgment is very valuable to us. Thank you for shopping bme280 precision atmospheric pressure sensor module gy-bme28-3v3 in our store > visit our store and check the other interesting things > thank you, don 't forget follow and give us 5 star reviews. Happy shopping: D Thank you. We await the next o

Cảm biến đo dòng điện loại : 100/5 - lỗ 30 200/5 lỗ 30 300/5 lỗ 30 500/5 lỗ 40 Biến dòng Ti Phụ kiện thiết bị điện công nghiệp - Dân Dụng Lh : 0973.860.662 #dong-ho-do-von #dong-ho-do-a #von-ke #am

The chip el: CH340G Output voltage: 3.3V Input voltage: 5V WLAN-standard 802.11b / g / n PWM / I2C / SPI / UART Colour: multicolor Material: ABS Size: 10x6x3cm Package Contents: 1 * Weather Station KitOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: Me-bme280 is a breakout board featuring a bosch sensortec me280 temperature, humidity & pressure sensor. The board has selectable i2c address jumper (solder link gs2), i2c pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO. If you connect board to both power rails vdd_io 1.8v and vdd 3.3v be sure to remove the power rail jumper gs1! Bme280 features - package 2.5mm x 2.5mm x 0.93mm metal lid lga - digital interface i2c (up to 3.4 mhz) and spi (3 and 4 wire, up to 10 mhz) 1.71 v to 3.6v voltage vdd main supply range Vddio voltage range interface: 1.2 v to 3.6 v - current consumption 1.8 ua @ 1 hz humidity and temperature 2.8 ua @ 1 hz pressure and temperature 3.6 ua @ 1 hz humidity, pressure and temperature 0.1 ua in sleep mode - operating range - 40 + 85 c, 0 100% rail. Humidity, 300 1100 hpa- humidity sensor and pressure sensor can be independently enabled. Bosch has stepped up their game with their new bmp280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the bmp085 / bmp180 / bmp183. This sensor is great for all sorts of weather sensing and can even be used in both i2c and spi! This precision sensor from bosch is the best low- cost, precision sensing solution for measuring barometric pressure with ± 1 hpa absolute accuracy, and temperature with ± 1.0 ° c accuracy. Because pressure changes with altitude, and the pressure measures are so good, you can also use it as an altimeter with ± 1 meter accuracy The bme280 is the next-generation of sensors from bosch, and is the upgrade to the bmp085 / bmp180 / bmp183 - with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either i2c or spi For simple easy wiring, go with i2c If you want to connect a bunch of sensors without worrying about i2c address collisions, go wit