Bluetooth hc05 arduino

P / n: Net-0002 ========== If Mr. wants arduino to communicate with Mr. 's cell phone or laptop, then the hc-05 bluetooth module is an appropriate, economical and easy solution. Unlike the hc-06, which can only be set as a slave, the hc-05 is superior in that it can be set as a master as well. The module we sold was included adapter plate with 6 pin header male so it was easy to use without bothering nyolder anymore. So, what are you waiting for gan, please order now!!!: D Description: This module can be set to a transmitter or receiver. As a receiver, hc05 could be paired with computers and cell phone bluetooth. 1. It 's hc-05. 2. Use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. 3. Module working voltage 3.3 v. 4. Potter default rate of 9600, the user can be set up. 5. The core module size: 28 mm x 15 mm x 2.35 mm. 6. Working current: Matching for 30 ma, matching the communication for 8 ma 7. Dormancy current: No dormancy. 8. Used for gps navigation system, water and electricity gas meter reading system. 9. With computer and bluetooth adapter pda seamless connection equipment Commercial series: Bluetooth module board series With led indicator light, use 150ma and 3.3v regulation chip. With foot for the bluetooth With "re-seach" button (on / off / wake foot for it, external mcu outinput "high level" can control module to re-seach) Compatible with bluetooth master module ". Slave module" or master-slave (whole) module. Voltage input: 3.3~6v Size: 1.55cmx3.98cm Note: Input power supply 3.3~6v 7v more than prohibit No. "Automatic prevent power supply peversing func", so please correctly connect power supply The "state" is output pin for led status, when bluetooth "unconnected", output "pulse"; when bluetooth "connected", output "high level" 1 x hc-05 bluetooth pac

Operating frequency band 2.4 ghz - 2.48 ghz unlicensed ism band Bluetooth specification v2.1 edr Output power class: Class 2 Operating voltage: 3.3v Uart interface host Dimension: 27mm (l) x 13mm (w) x 2mm (h) Temperature storage - 40c 150c Voltage supply: Vbat - 0.4v 5.6v Recommend operating conditions Operating temperature range - 40c 150c Guaranteed rf performance range (a) - 40c 150c Voltage supply: Vbat 2.2v 4.2

Cultivate reading before making purchases 🇸²🇸◂Hc-05 hc05 bluetooth transceiver module for arduino uno mega▸ ======== Description: ================================= So, what are you waiting for gan, please order now!!!: D Specs: ================================= - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: ================================= Package: ================================= - 1 x hc-05 bluetooth transceiver module - fast response on monday - saturday at 9: 00-17: 00, sunday or holiday off - please list the color / image / variant of the selection and reserve (if any) in the booking column yes. If we don 't list the options, we' ll send them as ready stock!!! - delivery on h + 1 (night). - if the message is empty and there 's no response for 1x24 hours then it' ll be delivered randomly. - recheck the phone number (phone) & full address. To speed up and smooth the shipment. - the goods that have been bought can 't be returned. > > > buy = agree < <

Before the delivery of goods will be checked to ensure quality of the product is maintained. Hc-05 similar image This module can be used to replace serial wired communication into wireless. This module can easily replace the serial communication module already in the system. There is no need for hardware additions at all. For the hc-05 type, modules can be arranged as master or slave as required. Hc-05 type can also be used to replace hc-06 module, Because the hc-05 by default acts as a slave like the hc-06. Specs Bluetooth protocol specification v2.0 + edr 2.4ghz ism band frequency Modulation: Gfsk (gaussian frequency shift keying) Power emissions: 4dbm, class 2 Sensitivity: - 84dbm at 0.1% ber Speed: Asynchronous: 2.1mbps (max) / 160 kbps, synchronous: 1mbps / 1mbps Security: Authentication and encryption Profile: Serial port bluetooth Power supply: 5 vdc 50ma Dimensions: 26.9mm x 13mm x 2.2mm Initial condition: 9600 baud, 8-n-1, pin 1234 Package contents 1 unit bluetooth module hc-05 (master - slave) If there are any questions or constraints about the product do not hesitate to a

Happy shopping. Net-002. Description: If you want arduino to communicate with cell phone or laptop Mr., So this hc-05 bluetooth module is the right solution., Economical and easy. Unlike the hc-06, which can only be set as a slave, the hc-05 is superior in that it can be set as a master as well. The module we sold was included adapter plate with 6 pin header male so it was easy to use without bothering nyolder anymore. So, what are you waiting for gan, please order now!!!: D Specs: - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with led indicator light, use 150ma and 3.3v regulation chip. - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: - if you want to use a serial of rx and tx pin monitors, you have to use another pin. (Use serial library software to move rx tx) Alias cannot use d0 and d1 pins because it will clash so bluetooth cannot communicate with arduino because rx tx on d0 and d1 are already used for serial monitors Package: - 1 x hc-05 bluetooth transceiver module Didn 't list the colors we sent random.. Thank you After 2: 30 p.m. Sent the next day 😉 Red date no shipment yes sis 😍 Don 't forget the review. Star 5 yes sis.

👨‍👨‍👧‍👦 Bluetooth module arduino hc-05 hc05 not hc-06 hc06 arduino 🍄🍄🍄🍄 If you will click Favorite Art techno shop yes sis To find product back / shop is easy to find The hc-05 / bo bluetooth module is to create an embedded project you have serial communication capabilities with standard bluetooth protocol version 2.0. Hc-05 core board (Using csr bc417 chipset) Already paired with the connection adapter (Back-plane break-out board) So it 's easy to use, just connect this module to the connection cable. The power supply for this module is 3v3 (For arduino users, you can connect output 3v3 to vcc pin on this module). The current is used between 8 ma (during communication) and 30 ma (during the pairing process). Product specs Meet bluetooth v2.0 + edr specification Ism 2.4 ghz frequency work on the band Gfsk modulation (gaussian frequency shift keying) Emission power 4 dbm (class 2) Sensitivity - 84 dbm at 0.1% ber Speed at maximum asynchronous mode 2.1 mbps (max) / 160 kbps 1mbps synchronous mode speed Security features with authentication and data encryption 3.3 volt dc power supply with 50 ma current consumption Operational temperature range from - 20c to + 75c 15.2x35.7x5.6mm module size Please click buy yes Thank you Uno module 🍄🍄🍄🍄 📤⚓️ Read compulsory notes before transactions 📤⚓️ Check stock before order 📤⚓️ The products that have been purchased cannot be returned 📤⚓️ Do not accept any return & complaint in any form 📤⚓️ Bluetooth module arduino hc-05 hc05 not hc-06 hc06 ar

Please read the description The goods we sell are already through the qc factory for quality and function guarantee., Unless a miscarriage of goods or a lack of goods can be resolved through diskussion, buying means agreeing to these provisions. I 'm sorry the order we received was at least rp.5,000 outside the budget, below rp.5,000 we' re not going to process, order up to rp.5,000 will be processed. Want your delivery smoothly? Please make sure the address is complete: Street name, home number, rt / rw, active cell phone number. Description: Bt04-e bluetooth module bt 04-e arduino raspbery pi module vs hc05 hc06 Bluetooth bt04-e module with mini maxi performance ready to make your project with dual spp3.0 protocol ble4.2 Xxreacting compared to the hc05 / 06 / 04 / 02 series (photo check): 1. Smaller size 2. Spp3.0 + ble4.2 protocol 3. Transmission distance to 40 meters 4. Can connect to android, apple iphone, computer etc. 5. Very low power consumption (electricity saving) Xxspecification: Bluetooth v3.0 spp and v4.2 ble protocol Working frequency: 2.4ghz ism band Communication interface: Uart Power input: 1.8-3.6v (rekomen 3.3v) Transmission distance: 40m. Size: 16.1x11.4x2mm Authentication: Rohs, fcc, ce Bt04-e bluetooth name (changeable) Pairing code: 1234 (spp protocol is valid) Parameter series: 9600, 8 data bit, 1 stop bit, no parity, no flow control Service uuid: Ffe0 Note uuid: Ffe1 Write uuid: Ffe2 Working temperature: - 20 ~ + 85c Photos of the original product and produce can be different, depending on stock. But for the function remains the same, buying means agreeing to the terms. Have a good time shopping in our shop and follow our shop for the update. Thank

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! Bluetooth module hc05 for arduino uno

Hello! Nice to meet you! Welcome to our store! Please visit our store every day to see the latest product We 're trustworthy stores with economical prices. No worries! You 'll get quality products We made sure we checked the goods before they were sent. Please contact us if there are any further questions Have a nice day and don 't forget to give us a 5 star if you like our product Thank you for coming! Hope you have a good shopping experi

Our top product, hc-05 hc05 bluetooth transceiver module for arduino uno mega...... Description: So, what are you waiting for gan, please order now!!!: D Specs: - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: Package: - 1 x hc-05 bluetooth transceiver module - please list the color / image / variant of the selection and reserve (if any) in the booking column yes. - if the message is empty and there 's no response for 1x24 hours then it' ll be delivered randomly. - recheck the phone number (phone) & full address. To speed up and smooth the shipment. - our warehouse is in jakarta, east java and others. So shipping isn 't always the address of this s

Whatever shopping you want is just in the shop with a happy feeling, see the assessment or feedback of all the products available and meet the best store quickly. We always put the satisfaction of shopping to all our buyers. Get free shipping only at the shopee. Shopping at will without having to worry about shipping costs, ★★★ This product has been bought a lot by shopee customers, so you don 't have to hesitate to shop in our store. We 'll give you a warranty back if the product you ordered doesn' t get to you. ★★ Hc05 hc-05 wireless bluetooth module for arduino Ket stuff: Specs: ================================= - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - size: 1.55cmx3.98cm Note: ================================= What you see is what you get ★★★ Before delivery we always do quality control and ensure the product condition is new and no damage. ★★★★★★★★ Press the post for your shopping. Shopee 's friend would hesitate if you sent it to buy the same price or even charge the price of the item you ordered? It 's better if you' re better at picking couriers for your shopping. But instead of thinking about the money, it 's guaranteed that you' ll be able to spend free of charge if you shop at the

Hc05 bluetooth module master or slave hc-05 arduino Hc-05 similar image For the hc-05 type, modules can be arranged as master or slave as required. Hc-05 type can also be used to replace hc-06 module, Because the hc-05 by default acts as a slave like the hc-06. Specs Bluetooth protocol specification v2.0 + edr 2.4ghz ism band frequency Modulation: Gfsk (gaussian frequency shift keying) Power emissions: 4dbm, class 2 Sensitivity: - 84dbm at 0.1% ber Speed: Asynchronous: 2.1mbps (max) / 160 kbps, synchronous: 1mbps / 1mbps Security: Authentication and encryption Profile: Serial port bluetooth Power supply: 5 vdc 50ma Dimensions: 26.9mm x 13mm x 2.2mm Package contents 1 unit bluetooth module hc-05 (master - slave) (If you need a connector cable, please order a connector cable in other products in this store) Cultivate reading before buying: X) color & size selection is only through the "information / note" column during the order, not through chat & diskussion. *) It is mandatory to document when opening a video package in case anything is inappropriate / damaged / defective as a condition of return in our store X) if you decide to buy then we assume you agree with the above rules X) do not accept any return & complaint "Read compulsory notes before transactions." "Check stock before order" "The product that has been bought cannot be returned." "Don 't accept return and complain in any form." Xnb: Please confirm or advise when the item is received. Happy shopping!

Net-002. Description: If you want arduino to communicate with cell phone or laptop Mr., So this hc-05 bluetooth module is the right solution., Economical and easy. Unlike the hc-06, which can only be set as a slave, the hc-05 is superior in that it can be set as a master as well. The module we sold was included adapter plate with 6 pin header male so it was easy to use without bothering nyolder anymore. So, what are you waiting for gan, please order now!!!: D Specs: - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with led indicator light, use 150ma and 3.3v regulation chip. - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: - if you want to use a serial of rx and tx pin monitors, you have to use another pin. (Use serial library software to move rx tx) Alias cannot use d0 and d1 pins because it will clash so bluetooth cannot communicate with arduino because rx tx on d0 and d1 are already used for serial monitors Package: - 1 x hc-05 bluetooth transceiver m

Get whatever you need in the shopee with a calm heart. Check all available products and meet a reliable seller quickly. I always put the satisfaction of selling all my customers, using the cut-off sent only at the shopee! Shop at will without fear of shipping costs! ★★★★★ We prioritize the convenience and satisfaction of buyers in our store, Ask me something about incomprehensible products., We 'll get back to you in detail. ★★★ Hc05 hc-05 wireless bluetooth module for arduino Ket stuff: Specs: ================================= - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - size: 1.55cmx3.98cm Note: ================================= What you see is what you get ★★ Note: The delivery to the buyer is confirmed first yes sis, A complete address, Rt / rw, Postal code, Phone number, And the recipient 's name. So that things don 't happen. Choose the items that provide free shipping. Instead of using the promo code and the shopee code, you can also save more by sending promotions. A number of goods in shopee have a service of tens of thousands of delivery diskounts in selected products. With this piece you can save

New mini bluetooth bt04-e module, Maxi performance, Ready to use to create your project with dual protocol spp3.0 wireless communication capabilities + Ble4.2 Xxreacting compared to the hc05 / 06 / 04 / 02 series (photo check): - smaller size. - spp3.0 + ble4.2 protocol - transmission distance to 40 meters. - can connect to android, apple iphone, computer etc. - very low power consumption (electricity saving) Xxspecification: Bluetooth v3.0 spp and v4.2 ble protocol Working frequency: 2.4ghz ism band Communication interface: Uart Power input: 1.8-3.6v (rekomen 3.3v) Transmission distance: 40m. Size: 16.1x11.4x2mm Authentication: Rohs, fcc, ce Bt04-e bluetooth name (changeable) Pairing code: 1234 (spp protocol is valid) Parameter series: 9600, 8 data bit, 1 stop bit, no parity, no flow control Service uuid: Ffe0 Note uuid: Ffe1 Write uuid: Ffe2 Working temperature: - 20 ~

👞 Hc-05 hc05 bluetooth transceiver module for arduino uno mega 🔥🔥🔥🔥 Net-002. Description: So, what are you waiting for gan, please order now!!!: D Specs: - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with led indicator light, use 150ma and 3.3v regulation chip. - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: Package: - 1 x hc-05 bluetooth transceiver module 💚💚💚💚 🧜🍄 Read compulsory notes before transactions 🧜🍄 Check stock before order 🧜🍄 The products that have been purchased cannot be returned 🧜🍄 Do not accept any return & complaint in any form 🧜🍄 Hc-05 hc05 bluetooth transceiver module for arduino uno

Specs: - work voltage at 3.3 6 volt dc - ism frequency 2.4 ghz. - bluetooth v2.0 + edr protocol - speed can reach 1mbps in synchronous mode - speed can reach 2.1 mbps / 160 kbps at maximum asynchronous mode - current consumption is 50 ma. - operational temperature range - 20°C s / d + 75°C - it has security with data encryption and encryption. - 15.2x35.7x5.6mm dimensional m

Hardware specs: > sensitivity - 80dbm (typical) > rf transmit power up to + 4dbm > low power operation 1.8v 3.6v i / o > pio control > uart interface with programmable baudrate. > with integrated antenna Software specs: > auto connection at the time device ignited (default) > auto reconnect in the 30th minute when the relationship breaks due to the range of connections Default baudrate 9600, Bit data: 8, Stop bit = 1, Parity: No parity., Supporting baudrate: 9600, 19200, 38400, 57600, 115200, 230400 and 460800 The module can be used as a slave or master. The hc-05 has 2 configuration modes, namely at mode and communication mode. At mode functions to configure the hc-05 configuration. In addition, communication mode is used to communicate bluetooth with other devices. In use, the hc-05 can operate without special drivers. The signal distance from hc-05 is 10 meters, with no impediment. To communicate between bluetooth, at least two conditions are required: > communication must be between the master and slave. > passwords should be right (when doing pair

Description: So, what are you waiting for gan, please order now!!!: D Specs: - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: Package: - 1 x hc-05 bluetooth transceiver module Pay attention, please. - we 've ordered qc both quantity and quality, (Give an alternate color note, If it 's empty we' ll notify it through chat features and we 'll wait for a 1x24-hour response, No chat response. Then we 'll change color to a color similar to random.) - damage / loss of package in delivery beyond our responsibility (can claim directly to the chosen courier party) - wait for the next order invite friends and family yes! - thank you. ~ ~ > > > customer satisfaction is our primary goal < < < ~ ~ ~ ~ > > > > > thank you for your visit < < < < <

Features: 100% brand new and high quality! With vcc, gnd, txd, rxd, key foot for the bluetooth Led indicator bluetooth connection status fast flash indicates unpaired slow Flash indicates at mode, double flash indicates machine connected Ldo input voltage of 3.6-6v unpaired current is about 30ma backplane settings, Paired 10ma, input voltage prohibit more than 7v absolute prohibition of reverse Power. Level 3.3v interface, can be directly connected the variable scm (51, avr, pic, Arm, msp430, etc.), the 5v mcu also can be connected directly, without max232 Can 't go through the max232 Open to effective distance of 10 meters, over 10 meters is also possible, but Not of this the quality of the connection of the distance do to ensure The pair later when full-duplex series use, do not need to know anything about The bluetooth protocol, but only supports 8 data bits 1 stop bit no parity Communication format, which is the most commonly used communication format does Not support other formats. Support to establishment a bluetooth connection through at commands set the baud Rate, passkey, set parameters are saved after. Specifications: Voltage input: 3.6-6v Working current: Matching for 30 ma, matching the communication for 10 ma Output power class: Class 2 Package inclusions: 1pc hc-05 wireless bluetooth rf transceiver module without breakout

Specs: - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with led indicator light, use 150ma and 3.3v regulation chip. - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3

Specs: - size: 39.8mm x 15.5mm - input voltage: 3.6v - 6v - 6 pin / vcc / gnd / rxd / txd / state - there 's a connection status indicator - with a chip regulator 3.3v on-board, the current is about 30ma in unpair state. After pairing succeeded, the current became about 10ma. - level 3.3v interface can be directly connected to various microcontroller (Arduino / 51 / avr / pic / arm / msp430 etc) Including microcontroller 5v. It is connected directly to the microcontroller serial port, without the need for the max232 chip. - can be a master mode or a slave Note: - input voltage must not be above 7v. - don 't reverse-engineer vcc and gnd, because there' s no protection. Cable installlation method: Vcc: Positive power supply Gnd: Negative power supply Rxd: Data receipts from txd other equipment Txd: Data transfer to rxd other equipment Enabled client, enter at 3.3v

Stock safe, order my boss. All commercials as long as there 's ready stock ready to send, no need to ask for stock again, please go directly to my boss' order. Hc-05 serial bluetooth module clone improved chip Meaning? The module is a development of the original standard version hc05 module. The chip on this module was made in china Based on cloning from the standard chip. The price is cheaper than the standard hc05 Work voltage: 3.6-6.0v (5v recommended) Level series: 3.3v - 5.0v compatible Default baudrate: 9600. Default password: 0000 / 1234 Range: 10 meters (can be more than 10 meters in open area but connections may be disruptive or unstable) All orders coming in under 18: 00 will be delivered on the same day, besides that will be delivered tomorrow. Happy shopping: Make sure to choose the right item and list the product description (color, size, shape) if not list the notes for the selected product, then the product will be sent randomly Buying means agreeing yes, no complaining no return The price is the price per pc. Yes, brother. Th

Listen to the flash sale stuff. The most widely recognized promo shopee is the flash sale. In one day there will be a list of items sold at an interesting price. When the flash sale happens, you 're gonna have to hurry up and order the desired product on the flash sale program promotion and pay it directly. Most of each of the quota products are a little bit so who 's quick to get it. ★★★★ You won 't be able to add this product to your shopping cart if you don' t choose the color variant and the size of this product first. Please choose according to your interest. ★★ If you will click Favorite Art techno shop yes sis To find product back / shop is easy to find Product specs Meet bluetooth v2.0 + edr specification Ism 2.4 ghz frequency work on the band Gfsk modulation (gaussian frequency shift keying) Emission power 4 dbm (class 2) Speed at maximum asynchronous mode 2.1 mbps (max) / 160 kbps 1mbps synchronous mode speed Security features with authentication and data encryption 3.3 volt dc power supply with 50 ma current consumption Operational temperature range from - 20c to + 75c 15.2x35.7x5.6mm module size Please click buy yes Thank you ★★★ Note: It is mandatory to feedback and review if the booked item reaches the destination address. To support our team so that it can work better and be thorough again. #Bluetooth #Arduino #Arduinomodule #Arduinouno #Moduleforarduino ★★★★★★★★★ Get all your needs in the shop with a good feeling, check the assessment and review of all the products ready and meet the best selling store easily. I always put the comfort of selling to all our customers. Enjoy the cut-out delivery just at the shopee. Shop all you want without having to worry about the m

Before ordering, please read it first, because we do not want to disappoint our customers. As long as the goods are still plastered means stock the product is ready, so it can be ordered direct. For reservations if there is a color option, please provide color information and options if the color is empty or (call cs). Thank you If you will click Favorite To find product back / shop is easy to find Product specs Meet bluetooth v2.0 + edr specification Ism 2.4 ghz frequency work on the band Gfsk modulation (gaussian frequency shift keying) Emission power 4 dbm (class 2) Sensitivity - 84 dbm at 0.1% ber Speed at maximum asynchronous mode 2.1 mbps (max) / 160 kbps 1mbps synchronous mode speed Security features with authentication and data encryption 3.3 volt dc power supply with 50 ma current consumption Operational temperature range from - 20c to + 75c 15.2x35.7x5.6mm module size Please click buy yes Thank you Uno module Pay attention, please. 1. We 've ordered qc both in number and quality, (give the note an alternative color choice, if it' s empty we 'll notify it through chat features and we' ll wait for a 1x24-hour response, no chat response then the color will be changed to a similar color / random) 2. Damage / loss of package in delivery beyond our responsibility (can claim directly to the chosen courier party) 3. Wait for the next order invite friends and family yes! 4. Thank you. ~ ~ > > > customer satisfaction is our primary goal < < < ~ ~ ~ ~ > > > > > thank you for your visit < < < < < < ~ ~ #Arduinomodule #Moduleforarduino #Arduino #Bluetooth #Ardui

Specifications: 1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. 3. Module working voltage 3.3 V. 4. Potter default rate of 9600, the user can be set up. 5. The core module size : 28 mm x 15 mm x 2.35 mm. 6. Working current: matching for 30 MA, matching the communication for 8 MA. 7. Dormancy current: no dormancy. 8. Used for GPS navigation system, water and electricity gas meter reading system. 9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach) Compatible with bluetooth master module".slave module"or master-slave(whole) module. Input voltage: 3.3~6V Note: Input power supply 3.3~6V, Prohibit more than 7V No "Automatically prevent power supply peversing func", so please correctly connect power supply We advise to install "Bluetooth master module" The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU" If only the board , No any "Bluetooth Function The package includes: 1 * hc-05 m

Hc-05 hc05 bluetooth transceiver module for arduino uno mega Net-002. ======== Description: ================================= So, what are you waiting for gan, please order now!!!: D Specs: ================================= - it 's hc-05. - use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. - working voltage 3.3 v module. Potter default rate of 9600, the user can be set up - the core module size: 28 mm x 15 mm x 2.35 mm. Working current: Matching for 30 ma, matching the communication for 8 ma. - dormancy current: No dormancy. - with computer and bluetooth adapter pda seamless connection equipment - commercial series bluetooth module board series - with led indicator light, use 150ma and 3.3v regulation chip. - with foot for the bluetooth - compatible with bluetooth master module ". Slave module" or master-slave (whole) module. - voltage input: 3.3~6v (5v recommend) - size: 1.55cmx3.98cm Note: ================================= Package: ================================= - 1 x hc-05 bluetooth transceiver module Cultivate reading before buying: X) color & size selection is only through the "information / note" column during the order, not through chat & diskussion. *) It is mandatory to document when opening a video package in case anything is inappropriate / damaged / defective as a condition of return in our store X) if you decide to buy then we assume you agree with the above rules X) do not accept any return & complaint "Read compulsory notes before transactions." "Check stock before order" "The product that has been bought cannot be returned." "Don 't accept return and complain in any form." Xnb: Please confirm or feedback when the item arrives. Happy shopping!

Bluetooth hc-05 6 pin module ready to make your project have wireless serial communication capabilities with standard bluetooth v3.0 protocol Excess: 1. 6 pin i / o (not 5) 2. It can be used as a master or slave (2 in 1). 3. It 's been fitted with a header pin on all six ports, just connected using the cable. Specs: 1. 37.3mm x 15.5mm 2. Input voltage: 3.6v - 6v (jgn over 7v) 3. 6 pin / vcc / gnd / rxd / txd / state 4. With connection status indicator 5. With a 3.3v on-board chip regulator, the current is about 30ma in an unpair state. After pairing succeeded, the current became about 10ma. 6. Level 3.3v interface can be directly connected to various microcontroller (arduino / 51 / avr / pic / arm / msp430 etc.) including microcontroller 5v. It is connected directly to the microcontroller serial port, without the need for the max232 chip. 7. Transmission distance is effective in open space 10m. Above 10m is still possible but the quality of the connection decreases. 8. Once pairing is successful, it can be used as a full-duplex interfaces series without needing to understand the bluetooth protocol. 9. It can be a master mode or a slave 10. Default baudrate: 9600, data bit: 8, stop bit: 1, parity: No parity, password default: 1234, default name: Hc-05 Cable installlation method: Vcc: Positive power supply Gnd: Negative power supply Rxd: Data receipts from txd other equipment Txd: Data transfer to rxd other equipment Enabled client, enter at 3.3v mode X the stuff was tested before it was sent No complain = no return = no war

Default firmware version as of december 2019 version: 4.0- Bluetooth v2.0 module, Hc05 module allows you to connect arduino and other microcontrollers to systems such as smartphones (Android, ios.)Laptop, wireless communication between arduino / microcontroller. The module supports both master-type bluetooth and slave operations via at command. Interface uses uart. Library available for arduino: http://googl/kcIfQ3 Or http://googl/Y9YrmD The serial voltage level is 3.3v, making it suitable for arduino pro mini 3.3v. If you want to use arduino uno, Mega, Or nano can still-- better use the logic level converter module that freelab also provides. At command way of use: - vcc gnd rx tx connection to serial usb (e.g. Ft232). Connect to 3.3v (important!) - check if red led blink is slow (1x per 2 seconds) - open the program terminal (e.g. Hercules), then set 38400 8n1, cr lfend - send "at" - if there 's an ok return, then at command can run. For our comfort together: - stock always updates, guaranteed ready. - gosend / grab sent max at 15: 00. - jne / vehicle / post / jnt sent at 18: 00 and resi updated at 21: 00. To ask about marketing and sales.. For technical and other things, add

Let 's cultivate reading before buying Bluetooth module arduino hc-05 hc05 not hc-06 hc06 arduino Welcome to our store.. Please read our product description carefully, because we do not want to disappoint you as our customers. If you will click Favorite Product specs Meet bluetooth v2.0 + edr specification Ism 2.4 ghz frequency work on the band Gfsk modulation (gaussian frequency shift keying) Emission power 4 dbm (class 2) Sensitivity - 84 dbm at 0.1% ber Speed at maximum asynchronous mode 2.1 mbps (max) / 160 kbps 1mbps synchronous mode speed Security features with authentication and data encryption 3.3 volt dc power supply with 50 ma current consumption Operational temperature range from - 20c to + 75c 15.2x35.7x5.6mm module size Please click buy yes Thank you Uno module Note: We 've always done checks before we send them to you to make sure there' s no defect in the product and get to your hands in good shape. - please list the color / image / variant of the selection and reserve (if any) in the booking column yes. - payment less than 12 o 'clock straight in the yaa process and purchase over 12 o' clock in the process the next day. - if the message is empty and there 's no response for 1x24 hours then it' ll be delivered randomly. - recheck the phone number (phone) & full address. To speed up and smooth the shipment. - the goods that have been bought can 't be returned. - bro and sis are tardiness because the expedition trip is not our responsibility, please contact the nearest expedition. - please confirm as soon as the goods are received and don 't forget to give us 5th star. Your judgment is very valuable to us. Thank you for shopping bluetooth module arduino hc-05 hc05 instead of hc-06 hc06 arduino in our store > visit our store and check the other interesting things Happy shopping: D Thank you for your trust in our s