Ata to sata

Đặc điểm nổi bật: Cáp chia nguồn SATA 1 ra 2 - Cáp chia nguồn SATA 1 ra 2. Chia từ 1 cổng nguồn SATA Male sang 2 cổng nguồn SATA Female - Sử dụng cấp nguồn cho ổ cứng SSD, HDD SATA 2.5" 3.5", DVD SATA ( thường sử dụng cho các máy tính đồng bộ cần lắp thêm ổ cứng SSD...) --------------------------------------------------------- ➡ UY TÍN LÀ TRÊN HẾT, VUI VẺ NHIỆT TÌNH, KHÁCH HÀNG LÀ THƯỢNG ĐẾ ➡ BẢO ĐẢM HÀNG CHẤT LƯỢNG, CẢ NHÀ YÊN TÂM TUYỆT ĐỐI ---------------------------------------------------------- Quý khách vui lòng Đánh giá 5 sao để được mua nhiều hàng CHẤT LƯỢNG TỐT với GIÁ SỈ SẢN PHẨM CHẤT LƯỢN

IDE sang SATA & SATA sang IDE Card chuyển IDE to SATA 2 chiều. Card chuyển đổi từ cổng IDE sang SATA2 hoặc từ SATA2 sang IDE, sử dụng thuận tiện trong việc trao đổi dữ liệu giữa 2 thế hệ ổ cứng, dễ sử dụng, cắm vào là

Shielded cable to protect against EMI/RFI Suitable for 3.5 Inches SATA Hard Disk and 3.5 Inches SATA CD-ROM; DVD-ROM; DVD-R/W; CD-R/W and so on Compliant with Serial ATA 1.0 Standards Easy to install and easy to use Simple connect the 4pin Male Molex Connector to a 4pin Female SATA connector which is supplied by your computer power adapter Transfer a 4Pin Molex Power Connector to SATA Female power connector Introduction: Serial ATA power cables are usually 4 or 5-pin cables with 15-pin connectors. SATA power cables currently use IDE/ATAPI to SATA power adapters. One end of the SATA power cable is a typical 4-pin IDE/ATAPI power connector (which gets connected to an unused power cable from the power supply) and the other end (15-pin connector) is connected to the SATA hard drive. Cable Length: 12cm/4.72" Connector A: 4 pin molex male Connector B: 15 pin Sata female Package Included: 3*4 Pin Male to 15 Pin Female SATA Serial Power

30cm USB 2.0 to SATA 2.5/3.5 inch SSD Hard Disk Drive Adapter Converter for Desktop Laptop The 2.5 inch SATA hard disk is connected to the computer, and the function of the hard disk box is easily set up. The product transmission interface uses a very stable USB2.0 interface and is down compatible with USB1.0. Dual USB interface power supply, without an external power supply, can support a high speed hard disk with a speed of 7200rp. Support 2.5 inch SATA1 & SATA2 hard disk. It is small, plug and play, easy to carry. Cable length: approx. 30cm/11.81 inch Weight: approx. 37g Transmission speed: USB2.0: 480Mb/s Hot plug: support Power supply: mainframe dual USB power supply System requirements: Windows 98se/Me/2000/XP/7/8/Vista; MAC Colour: Black Material: PC + metal Package Contents: 1 x SATA Hard Disk Drive Converter CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Specifications: Clever design connect the 2.5" SATA HDD to your computer into external enclosure. Support USB2.0 with transmission speed up to 480MB/sec, and also compatible on USB 1.0, USB Y cable supports 7200rpm HDD or more. Support hot-swap, plug and play, light weight, easy to carry along. Type: Adapter Cable Color: Black Material: Copper Note: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Package Includes: 1 x USB 2.0 to Sata Converter Adapter Cable #25inchcable #Adapter #Adaptercable #Atacable #Cables&Adapters #Convertercable #Hddssd #Satacable #Sataconverter

【PS】7 Pin SATA Serial ATA to SAS 29 Pin & 4 Pin Cable Male Connector Adapter Features: 7 Pin SATA Connector to 4 Pin Male Power Connector and 29 Pin SAS Connector. This is 7 pin SATA to SAS 29 pin & 4 pin connector. for mainly connecting hard disk to motherboard. Designed to replace the SCSI parallel interface with much faster, more flexible. 3Gb/s serial interface while maintaining the robust nature of the SCSI Command Set. Description: Connector Details: 1 x 7 Pin Serial ATA Female. Connector Details: 1 x LP4 Male. Connector Details: 1 x 22 Pin SAS Female. Specifications: Products Status:Stock Type:Cable Adapter Main Color: Blue Cable length: about 60cm Net weight: 32g Packing content: 1 x Sata Power Cable

Brand New Best quality!!! Use these to add extra power outlets to your power supply for connecting Serial ATA hard drives & CD ROM drives 2 pcs sell together 4 Pin IDE to 15 Pin SATA Approximately 6" long Package includes: 1 x IDE to SATA Power Cable exte

Interface: 2 internal SATA interfaces, 1 ATA133 interface, 2 external ESATA interfaces (external ESATA and internal SATA can only use 2 at the same time, select by jumper, the default is 2 internal SATA interfaces) PATA: Support Ultra ATA 133 hard drives, and down support Ultra ATA 100/66/33 standards, transmission rate 133MB/sec, ATA133, support 137 GB or more capacity hard drives (48-bit LBA e), 1 IDE interface supports up to 2 IDE devices. SATA II: Support 1 external ESATA interface and 1 internal SATA interface, transfer rate up to 3Gb/s, support SATA 1.0 standard, 256-byte FIFO port fast read/write operation. Support plug and play, the driver supports for Windows 2000/xp/7/8/server 2003/xp 64-bit/ Vista, Linux, Mac, Dos. Colour:black Material:PCB board + metal Package Contents: 1 x PCIE CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

【sweetbabe】1pc 4 Pin IDE Molex to 15-Pin Serial ATA SATA Hard DriBrand New Best quality!!! Use these to add extra power outlets to your power supply for connecting Serial ATA hard drives & CD ROM drives 2 pcs sell together 4 Pin IDE to 15 Pin SATA Approximately 6" long Package includes: 1 x IDE to SATA Power Cable exte

Dear, this product is stock. You can place an order if you need.the product comes from China, the shipping time will be 7-15 days,please give me a good comment if you can. Thank you! 100% Brand new and high quality 7 Pin SATA Connector to 4 Pin Male Power Connector and 29 Pin SAS Connector. Designed to replace the SCSI parallel interface with much faster, more flexible. 3Gb/s serial interface while maintaining the robust nature of the SCSI Command Set. Connector Details: 1 x 7 Pin Serial ATA Female. Connector Details: 1 x LP4 Male. Connector Details: 1 x 29 Pin SAS Female. Color: As the picture Length: Approx. 70cm Included: 1 x 7 Pin SATA Serial ATA to SAS 29 Pin and 4 Pin Power

---------------------Yyci.vn------------ Decription: Features: 6*2.2cm/2.36"*0.87" Cable length:20.00cm/7.87" Quantity:1Set JM series chips, the best compatibility and stability Compatibale with: Windows XP\7\8 32bit/64bit For IDE drives, recorders, 3.5-inch hard disk, hard disk recorders On behalf of the motherboard SATA 1, SATA 2 generations, SATA 3 generations interfaces perfectly compatible. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish The need for external power adapter to work When connecting the riser need to turn off your computer Plug and play, no drive needed Notice: Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Please allow 2-3cm differs due to manual measurement . Included: 1 x IDE to SATA adapter 1 x 4Pin IDE power

🔒 CAM KẾT ẢNH THẬT- HÀNG THẬT 🔒 VỀ SẢN PHẨM: Shop cam kết cả về CHẤT LIỆU cũng như HÌNH DÁNG ĐÚNG như phần mô tả sản phẩm 🔒 VỀ DỊCH VỤ: 100% các sản phẩm đều có BẢO HÀNH. 🔒 Tất Cả Các Sản Phẩm Trước Khi Giao Tới Tay Khách Hàng Đều Được Cài Đặt Và Kiểm Tra Chất Lượng Sản Phẩm Để Tránh Trường Hợp Sản Phẩm Bị Lỗi Và Đảm Bảo Đạt Chất Lượng Tốt Nhất Cho Khách Hàng . 🔒 CAM KẾT ĐỔI TRẢ NẾU SẢN PHẨM BỊ LỖI ----------------🌟----------------- 📌 TÍNH NĂNG NỔI BẬT: ✪ Hãng sản xuất: Ugreen Model: 50422 Input: USB 3.0 B đực Output: cổng SATA 7+15 Pin Hệ điều hành: tương thích Windows/Linux/Mac OS Đèn LED xanh cho biết tình trạng hoạt động và kết nối Hỗ trợ đi kèm cáp USB 3.0 kết nối dài 1m Nguồn cấp 12V/2A Cắm là chạy mà không phải cài đặt bất kỳ trình điều khiển bổ sung Kích thước: 194x117x38mm ✪ Hỗ trợ USB 3.0 tốc độ truyền dữ liệu lên đến 5Gbps kết nối hỗ trợ UASP, tương thích ngược với USB 2.0/1.1 ✪ Hoạt động với ổ cứng 3.5 HDD hoặc SSD dung lượng tối đa hỗ trợ lên đến 10 TB, chẳng hạn như WD Red, Seagate Barracuda, Seagate Skyhawk TOSHIBA P300, Toshiba X300... ✪ Tính tương thích cao: HDD box 3.5/2.5 inch là giải pháp lý tưởng cho kết nối đĩa cứng SATA I / II/ máy tính II 3.5 inch, TV thông minh, PS4, PS4 Pro, Xbox 360, Xbox One... ----------------🌟----------------- 📌 CHÍNH SÁCH BẢO HÀNH CHÍNH HÃNG UGREEN : ✔ Bảo Hành 18 Tháng (1 đổi 1) ✔ Có dán tem + Phiếu bảo hành đi kèm ----------------🌟----------------- 👑 QUYỀN LỢI CỦA KHÁCH HÀNG 🔰🔰🔰 ✔️ Qúy khách hàng sau khi nhận và trải nghiệm sản phẩm HÃY ĐÁNH GIÁ 5* giúp shop nhé + kèm hình ảnh sản phẩm . Shop sẽ được gửi kèm 1 MÃ GIẢM GIÁ trong lần mua hàng tiếp theo. ✔️ Nếu sản phẩm quý khách hàng sử dụng chưa ưng ý, hãy liên hệ ngay với Shop để được hưởng chính sách ĐỔI – TRẢ - HOÀN TIỀN. Đừng vội đánh giá 1* mà hãy NHẮN TIN NGAY cho shop nhé ------ 🌟 ------ Cảm Ơn Quý Khách Đã Ghé Thăm Gian Hàng ------🌟 ------ #ugreen #ugreen 50422 #ugreenchinhhang #boxdungocung #box3.5inch #boxdidong #ocungganngoai #ocungd

---------------------Yyci.vn------------ Decription: Feature:     Serial ATA (SATA) – 1.5 Gbps (150MB/s) Compliant with SATA 1.0 specification Integrated SATA Transport, Link logic, and PHY layer 48-bit sector addressing Four independent DMA channels with 256B FIFO per channel Virtual DMA in PCI with serial link in legacy PIO mode Supports command buffering for ATA TF shadow registers Supports ATAPI devices: CD-ROM, DVD-ROM, etc. Hot-Plug capable Supports 32-bit wide PCI bus at 66MHz Selectable drive strength on Tx for backplane applications Supports spread spectrum clocking to reduce EMI Single, digital PLL architecture with 1 PLL for all 4 channels Drivers supports Just a Bunch of Disks(JBOD) ROM BIOS supports RAID setup and Boot Features Support Linux, Windows 98SE, ME, NT4.0, 2000,Server 2003,Server 2008, XP , XP 64-bit ,Vista 64bit ,Vista , win 7 and Win 7 64bit . 4 Internal SATA ports supporting/connect up to 4 SATA devices RAID Function: Supports RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1, RAID 5 and RAID 10 Adjustable stripe size for RAID 0 Support co-exist RAID set and Non-RAID HDD Allow HDDs with different sizes to be configurated in a RAID set SATARaid Management Utility supports SATARAID drivers used to host RAID levels 0, 1, 0+1, 5 and 10. Use this utility with the SATARAID BIOS and drivers to create, monitor, manage, and access RAID volumes. Support Windows System Included: 1 x PCI 4ports SATA Raid Card 2 x SATA cable 1 x Drive

Description: NEW IDE HDD to SATA Serial ATA Converter Adapter This Adapter Does it All, SATA Hard Drive To IDE Converter or IDE Drive to SATA Host Converter. This is a Bi-Direction converter for serial and parallel ATA translation. It includes the Serial ATA PHY , Link, Transport and Parallel ATA (application layer) controller. The Serial ATA physical, link and transport layers are compliant to serial ATA I/II . This Converter support a 3GHz Data Rate. With LED indicated Power. Easy install & no Driver Needed. Serial ATA 1.0/2.0 Specification Compliant. Automatic Serial ATA 1.5 Gbps Speed negotiation. ATA /ATAPI PIO mode 0 to 4. ATA / ATAPI Ultra DMA of Transfer rate 16.7 , 25, 33, 48, 66, 100, 133 , 150, 300MB/s. ATA /ATAPI LBA48 addressing node associated with 2-byte sector count. Support Serial ATA hot-Plug. Ultra low power Consumption. Work for both AC and DC couple between the transmitter and the receiver. Provide Specified OOB signal detection and Transmission. Support Spread Spectrum Clocking to reduce EMI. Support Partial / Slumber Power Management. Provide adjustable TX signal amplitude and pre-emphasis level. Slave Support. Support for Windows 98/SE/ME/2000/XP/Vista. Package List: 1 * IDE to SATA Converter 1 * SATA Cable 1 * Power

【FSTTTOMBN】1pc 4 Pin IDE Molex to 15-Pin Serial ATA SATA Hard Drive Power AdapBrand New Best quality!!! Use these to add extra power outlets to your power supply for connecting Serial ATA hard drives & CD ROM drives 2 pcs sell together 4 Pin IDE to 15 Pin SATA Approximately 6" long Package includes: 1 x IDE to SATA Power Cable exte

100% brand new and high quality Instructions: 1. Insert the IDE card socket of the conversion card into the IDE interface of the motherboard. 2. Plug one end of the SATA cable into the conversion card and the other end to the SATA hard drive. 3. Connect the conversion card to the power cable. The other end of the power cable is connected to the chassis power cable. 4. Connect the SATA hard drive to the power conversion cable, then connect the chassis power supply and start the computer power supply. Features: Supports two-way conversion (IDE hard drive to SATA motherboard / SATA hard drive to IDE motherboard) to improve system resource utilization. Supports DVD, DVD-RAM, MO, CD-ROM, CD-RW, hard disk. Plug and play. No need to install or set up any drivers. Support for Windows 98/ SE/ ME/ 2000/ XP. Converter Card only, other accessories demo in the picture are not included! Tips: 1. Turn off the power to the computer before operating. 2. Open the computer case, insert the SATA card of the adapter board into the SATA device (the hard disk of the SATA interface, etc.); set the master and slave jumpers of the SATA device as the master device (Master). 3. Connect the large end of the power cord to the power cord of the chassis power supply, and connect the small end to the adapter board (white carrier, please note that the direction cannot be reversed). 4. Connect one end of the equipped data cable to the IDE socket of the computer motherboard, and the other short connector to connect the product with SATA. 5. After the computer is connected, the computer will boot into the BIOS for device detection. The host computer should be able to correctly identify the connected SATA device. Specification: Material: Metal Color: Black, Red Size: Standard Size Quantity: 1 Set Note: 1.No retail package. 2.Please allow 0-1cm error due to manual measurement. plz make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 Pc x Converter Card 1 Pc x Power C

Welcome to SummerWind store, have a good shopping! Feature: This SATA 15P to Molex 4P Adapter features one LP4 female power connector and a male SATA power connector, allowing you to connect an IDE hard drive to a Serial ATA power connector provided by the computer power supply. Connector 1: SATA 15Pin Male; Connector 2: Molex 4Pin Female; Package include: 1pc x Adapt

Ê 2.5 Inch IDE to SATA Adapter Support ATA HDD Hard Disk Drive or SSD to 44 Pin Port Converter This is a IDE to SATA converter. 44Pin IDE connector is suitable for 2.5'' laptop SATA hard disk drive. Features: Adopted JM20330 chip, more stable performance. No driver installation is required. Compatible with Windows, DOS, Mac, Linux, etc. which support IDE/ATA storage devices. Allows SATA HDD connects to 44Pin IDE mobo. (Please note that it can not use conversely.) Specifications: Item Weight: 8g / 0.28oz Package Weight: 10g / 0.35oz Item Size: 6.8 * 2.6 * 1.5cm / 2.68 * 1.02 * 0.59in （L * W * H） Package Size: 9.6 * 6 * 1.5cm / 3.78 * 2.36 * 0.59in （L * W * H) Package List: 1 * Port Convert

Welcome to the risingmp shop, have a good shopping！ Brand New Best quality!!! Use these to add extra power outlets to your power supply for connecting Serial ATA hard drives & CD ROM drives 2 pcs sell together 4 Pin IDE to 15 Pin SATA Approximately 6" long Package includes: 1 x IDE to SATA Power Cable extenders Welcome to risingmp store,we will provide you with exquisite products and best services,welcome to buy! Activities: We will provide you with many activities&coupons and give you the most favorable products Arrival time: we use the official logistics channel of SHOPEE platform, the arrival time is 7-15 days Consult: If you have any questions about shopping, please send me messages,I will solve it for you as soon as possible Opening hours: 24

Decription: Features: SATA Combo Power and Data Cable This brand new SATA combo power and data cable combines both SATA data cable and Sata power adapter cable for an all in one sata drive connection. Connectors: 1 x Molex pin - 1 x SATA 15 pin, 1 x SATA 7 pin - 1 x SATA 7 pin Included: 1 x Data

Description: High quality and perfect performance. Feature: PATA TO SATA adapter card, IDE to SATA card, SATA conversion card, supports large hard disks. If your motherboard does not have a SATA interface, but you bought a SATA hard disk, you will need this card. One end of the card is directly inserted into the SATA hard disk, and the other end is connected to the motherboard and the chassis power supply through an IDE cable and a 4P power cable. Supports large-capacity SATA hard drives. Fully plug and play, no need to install any driver. PATA TO SATA suitable for 3.5/2.5 SATA hard drive DVD. Suitable for all SATA-type devices, such as CD-ROM/CD-RW/DVD/DVD-RAM/HDD. IDE to SATA adapter converter. Convert PATA/IDE into a serial ATA port. Supports ATA 100/133. Compliant with Serial ATA specification. Features one SATA port, one PATA port (40-pin IDE), and one 4-pin power connector (Molex). Adapter Card only, other accessories demo in the picture is not included! Specifications: Item Type: Adapter Card Material: plastic+metal Size: 99x16x19mm/3.8x0.6x0.7in Color: Green Quantity: 1 Pc Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x Adapter

Welcome to newwavebar2.vn Feature： Campact design, portable size, easy and convenient to carry and use You can easily assemble a 2.5" SATA HDD mobile enclosure with this USB to SATA cable You can also use them saperately--use the USB to SATA cable to connect the 2.5 SATA HDD to the computer USB 2.0 to SATA 15 + 7 pin connector Suitable for 2.5" SATA Hard Drive USB 2.0 interface, data transfer rates up to 480Mbps. Backwardly compatible with USB 1.0 Double USB connectors for no need of external power to support HDD up to 7200rpn (When lack of power, please plug the additional USB connector to the computer) Support Windows 98SE/ME/2000/XP/Vista/Win 7 and Mac Powered via computer USB port, no external power required Support hot swap Weight:37g Package Includes : 1 x USB to SATA Cable for 2.5" SAT

Specification: Color: colors Material: PVC + metal core Uses: 4-pin to 15-pin SATA hard drive power adapater cable Product Size: 18 * 2.5 * 1cm Packing List: 1 x Hard Drive Power Adapter Cable Molex to SATA 4-pin to 1

【PRT】1pc 4 Pin IDE Molex to 15-Pin Serial ATA SATA Hard Drive PowerBrand New Best quality!!! Use these to add extra power outlets to your power supply for connecting Serial ATA hard drives & CD ROM drives 2 pcs sell together 4 Pin IDE to 15 Pin SATA Approximately 6" long Package includes: 1 x IDE to SATA Power Cable exte

Welcome to flowersuring2.vn Feature： Campact design, portable size, easy and convenient to carry and use You can easily assemble a 2.5" SATA HDD mobile enclosure with this USB to SATA cable You can also use them saperately--use the USB to SATA cable to connect the 2.5 SATA HDD to the computer USB 2.0 to SATA 15 + 7 pin connector Suitable for 2.5" SATA Hard Drive USB 2.0 interface, data transfer rates up to 480Mbps. Backwardly compatible with USB 1.0 Double USB connectors for no need of external power to support HDD up to 7200rpn (When lack of power, please plug the additional USB connector to the computer) Support Windows 98SE/ME/2000/XP/Vista/Win 7 and Mac Powered via computer USB port, no external power required Support hot swap Weight:37g Package Includes : 1 x USB to SATA Cable for 2.5" SAT

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

☆♡♤ Welcome to our shop ☆♡♤ Decription: Features: Type:IDE to SATA/SATA to IDE Converter Size: 5.5 x 0.5 x 4.5 cm Color:Random 40pin IDE port Serial ATA port 4 pin power connector Supports ATA 100/133 Compliant with Serial ATA (SATA) Specification Data transfer rate up to 1.5G per second No Driver Required Maximum hard-drive capacity:160GB Notice: Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Please allow 2-3cm differs due to manual measurement . Included: 1 x IDE to SATA/SATA to IDE Converter 1 x SATA Cable 1 x Power

Details: *SAS Serial Attached SCSI SFF-8482 to SATA CableHDD Hard Disk Drive Adapter Cord *Used for connecting a SAS controller to SATA hard drives. *Perfect hard drive cable adapter, 7 Pin serial ATA female, LP4 male,29 pin SAS female. *Highspeed data transfer up to 3Gbps/1.5Gbpswith SATA and SATA II support. *Idealfor work station, blade servers, external storage arrays, SAS expanders, etc. *Color: Blue(As pictures show) *Length: approx.70cm/ 26.7inch *Weight: approx. 45g Package Contents: 1* CableAdapter Note:The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. #SCSISFF-8482ToSATAcord  #Adapter  #Cable  #HDD  #Blue  #7Pin  #Replacement  #1Pcs  #Converter  #Plug  #Straight  #45g  #Port  #3Gbps  #Connector  #Useful  #Accessories  #Parts &

🐫🐫Dear friends, {iffarmerrtr} has opened! ! ! Warmly welcome all of you to come and patronize. I will bring you the best shopping experience with my most sincere service! ! !🐫🐫 ======================{iffarmerrtr}====================== Features: 100% brand new and high quality 4Pin IDE Molex to 2 Serial ATA SATA Y Splitter Hard Drive Power Cable This cable adapter input one standard Molex IDE power cable in to two standard ATA / SATA female connectors. A very useful adapter for those looking to plug additional SATA drives (Hard Drives, DVD-ROMs) or devices (video cards, fans etc.) That require extra ATA / SATA power connections from available IDE Molex power cable. Convert one Standard 4-pins Molex power plug into two female ATA / SATA power cables Expands from one 4pin IDE power connector to two SATA power cable connectors This expansion / extension adapter cable works great for adding SATA drives Specifications: 4 Pin IDE Power Splitter 1 Male to 2 Female ATA / SATA power cable Length: 4 inch Quantity: 1 pcs Package Includes: 1 x 4Pin IDE Molex to 2 Serial ATA SATA Y Splitter Hard Drive Power

🎉🎉🎉 Welcome to my shop, wish you have a happy day!!! <crownfamily1> SATA Combo 15 Pin Power and 7 pin Data Cable 4 pin Molex to Serial ATA Lead This brand new SATA combo power and data cable combines both SATA data cable and Sata power adapter cable for an all in one sata drive connection. Connectors: 1 x Molex pin - 1 x SATA 15 pin, 1 x SATA 7 pin - 1 x SATA