Arduino 28byj 48

Insulated resistance : >10MΩ(500V) Insulation grade :A Stride Angle : 5.625° /64 Model : 24BYJ-48 Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc., Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95. Rise in Temperature less than 35K(120Hz) DC resistance : 200Ω±7%(25℃) Speed Variation Ratio : 1/64 Number of Phase : 4 In-traction Torque : >34.3mN.m(120Hz) Noise less than 35dB(120Hz,No load,10cm) Friction torque : 800-2200 gf.cm Rated voltage : 12VDC Pull in torque : ≥450 gf.cm Idle In-traction : 300Hz Insulated electricity power :600VAC/1mA/1s Self-positioning Torque : >34.3mN.m Idle Out-traction : 500Hz Package included: 1PC*DC 12V Stepper Motor 28B

28BYJ-48 DC 5V Reduction Step Gear Stepper Motor 4 Phase 28byj 28byj48 for arduino Diy Kit Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Chúng tôi có rất nhiều sản phẩm ở trong kho, kho của chúng tôi ở Thâm Quyến. Nếu bạn xác nhận đơn đặt hàng, chúng tôi sẽ xử lý trong thời gian sớm nhất có thể. nếu bạn liện hệ với chúng tôi, nhưng chúng tôi không trả lời bạn, xin đừng lo lắng, Chúng tôi đang cố gắng xử lý đơn đặt hàng của bạn nhanh nhất. Vì vậy, xin đừng hủy đơn

Welcome to out store Newhopetree.Wish you have a good shopping. Feature: Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Cable length :23.5CM ULN2003 Driver Board: A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm What's in the package: 1 Pc * stepper motor 1 Pc * ULN2003 Driver

🍀【Specification】: Stepper motor driver board with ULN2003. A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm   📦【Package List】: 1 x ULN2003 Treiberplatine Stepper Motor Driver Schrittmotor Modul Board Ar

Hello.this is Jointdaisy-shop,welcome! Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

- quantity: 1. - silver: - diameter: 28mm - voltage: 5v. - no-load pull into the frequency: > 600hz - phase: 4. - no-load pull-out frequency: > 1000hz - reduction ratio: 64 / 1 - pull-in torque: > 34.3mn.m (120hz) - step angle: 5.625x1 / 64 -

ღ Welcome To Colorfulswallowfly ღ Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Low- cost stepper motor for 12v. This is normally used in the manufacturing of air-conditioners, Automatic window blinds and other applications where high torque is more important than high speed. The motor is internally geared with a ratio of about 64: 1 (more precisely 63.68395: 1) and rotates with about 15rpm at 12v. The motor can be used together with all stepper motor drivers for unipolar motors. The red wire should then be connected to ground (gnd), orange / pink to m1 (or similar) and blue / yellow to m2 (or similar). Can also easily be driven by descrete transistors or a darlington driver (uln2003). Specifications: X rated voltage: 12vdc X number of poles: 4 X gear ratio: 64: 1 X rotations / steps (stride angle): 5.625 (/ 64) X steps / revolution: 4096 X dc resistance: 200ohms 7% X output shaft: 5mm flat X jst xh 5-pol 2.5mm connector X connection wires: 240mm X weight: 36g X dimension: 28

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Động cơ bước 4 pha 28BYJ-48-5V kèm bảng điều khiển ULN2003 cho Arduino Mô tả Sản phẩm: Điện áp định mức: DC5V 4 pha Tỷ lệ giảm: 1/64 Bước mô-men xoắn: 5.625/64 Điện trở DC: 200 ± 7% (25) Điện trở cách điện:> 10M (500V) Độ bền điện môi: 600V AC / 1mA / 1s Lớp cách nhiệt: A Tần số kéo không tải:> 600Hz Tần số kéo ra không tải:> 1000Hz Mômen kéo:> 34.3mN.m (120Hz) Duy trì mô-men xoắn:> 34.3mN.m Nhiệt độ tăng: <40K (120Hz) Độ ồn: <40dB (120Hz, Không tải, 10cm) 4-pha 5-dây có thể được điều khiển bởi chip uln2003 thông thường cũng có thể được kết nối trong bảng điều khiển 2 pha. Hỗ trợ sử dụng phích cắm trực tiếp và động cơ bước dễ sử dụng được sử dụng trong bảng điều khiển. Bảng điều khiển động cơ bước ULN2003 Đèn LED bốn pha A, B, C, D cho biết trạng thái hoạt động của động cơ bước Động cơ bước với giao diện tiêu chuẩn, khi sử dụng có thể cắm trực tiếp. Gói hàng bao gồm: 1 X bảng điều khiển ULN2003 1 X Động cơ bước #1set #28BYJ-48-5V #4 #phase #Stepper #Motor + #Driver #Board #ULN2003 #for #Arduino #1 #x #Stepper #motor #+ #1x #ULN2003 #Driver#

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Động cơ bước 4 pha 28BYJ-48-5V + Bảng điều khiển ULN2003 cho Arduino Mô tả sản phẩm: Điện áp định mức: DC5V 4 pha Tỷ lệ giảm: 1/64 Bước mô men xoắn: 5.625 / 64 Điện trở DC: 200 ± 7% (25) Điện trở cách điện:> 10M (500V) Độ bền điện môi: 600V AC / 1mA / 1s Lớp cách điện: A Tần số kéo vào không tải:> 600Hz Tần số kéo ra không tải:> 1000Hz Mô-men xoắn kéo theo:> 34.3mN.m (120Hz) Mô-men xoắn giữ lại:> 34.3mN.m Nhiệt độ tăng: <40K (120Hz) Độ ồn: <40dB (120Hz, Không tải, 10cm) 4 pha 5 dây có thể được điều khiển bởi chip uln2003 thông thường cũng có thể được kết nối trong bảng mạch phát triển 2 pha. Hỗ trợ việc sử dụng phích cắm trực tiếp và động cơ bước dễ sử dụng được sử dụng trong bảng mạch phát triển. Bảng điều khiển động cơ bước ULN2003 Đèn LED bốn pha A, B, C, D cho biết trạng thái hoạt động của động cơ bước Động cơ bước với giao diện chuẩn, khi được sử dụng trực tiếp có thể cắm Gói hàng bao gồm: 1 X Bảng điều khiển ULN2003 1 X Động cơ bước Tiền mãi: 1. Tất cả hàng hóa đang có sẵn trong kho. 2. Xin vui lòng đọc mô tả sản phẩm, nếu bạn có bất kỳ câu hỏi nào, đừng ngần ngại liên hệ với chúng tôi. Hậu mãi: 1.Nếu bạn hài lòng hãy dành cho chúng tôi đánh giá 5 sao. 2. Xin vui lòng liên hệ với chúng tôi trước khi bạn cho chúng tôi nhận xét xấu. Chúng tôi rất hữu ích và sẽ giải quyết các vấn đề. Nếu bạn nhận được một sản phẩm bị lỗi, xin vui lòng liên hệ với chúng tôi kèm với hình ảnh hoặc video #1set #28BYJ-48-5V #4 #phase #Stepper #Motor + #Driver #Board #ULN2003 #for #Arduino #1 #x #Stepper #motor #+ #1x #UL

【ter】28BYJ-48 5V Reduction Step Gear Stepper Motor 4 Phase 28byj 28byj48 for arduinoGear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

❄ Welcome To Chitengyesuper ❄ Feature: Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Cable length :23.5CM ULN2003 Driver Board: A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm What's in the package: 1 Pc * stepper motor 1 Pc * ULN2003 Driver

Our CS team will answer all the emails from you,if you have any problem about our product or the purchased order,just feel free to contact us. 5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board used for. Supporting the use of a direct plug and easy to use stepper motor used in the development board. Stepper motor driver board with ULN2003. A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Color: As Pictures Show Size: As Pictures Show 1 * 28BYJ-48 5V Stepper Motor + ULN2003 Driver Board 1.Due to the manual measurement and different measurement methods, the actual size could be slightly different. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. Note: 1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard. #Steppingmotor #4-Phase #LEDDiodecase #StepperMotor #ULNdrivingboard #driverboard #ulnboard #Module #ULN2003 #L

[ulovebsby]28BYJ-48 5V Reduction Step Gear Stepper Motor 4 Phase 28byj 28byj48 for arduinoGear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Features: Mainly used in Air Conditioner Louver , Small Cooling/Heating Fan etc., Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95. Rated voltage : 12VDC Number of Phase : 4 Speed Variation Ratio : 1/64 Stride Angle : 5.625° /64 DC resistance : 200Ω±7%(25°C) Idle In-traction : 300Hz Idle Out-traction : 500Hz In-traction Torque : >34.3mN.m(120Hz) Self-positioning Torque : >34.3mN.m Friction torque : 800-2200 gf.cm Pull in torque : ≥450 gf.cm Insulated resistance : >10MΩ(500V) Insulated electricity power :600VAC/1mA/1s Insulation grade :A Rise in Temperature <35K(120Hz) Noise <35dB(120Hz,No load,10cm) Model : 24BYJ-48 Package Included: 1 x 28BYJ-48 Valve Gear Stepper Motor DC 12V 4 Phase Step Motor Ar

Description: -Diameter: 28mm -Voltage: 5V -The step angle: 5.625 x 1/64 -Speed down ratio: 1/64 -The 5 line 4 phase can use ordinary ULN2003 chip driver, it can be connected into the 2 phase and matched with the development board use, direct splicing, it is convenient to use stepper motor in the development board Packing List: 1 Pcs 28BYJ-48 Valve Gear Stepper

Sự miêu tả: Điện áp định mức: DC5V 4 pha Tỷ lệ giảm: 1/64 Góc mô men bước: 5.625/64 Điện trở DC: 200 ± 7% (25) Điện trở cách điện:> 10M (500V) Độ bền điện môi: 600V AC / 1mA / 1s Lớp cách nhiệt: A Tần số kéo vào không tải:> 600Hz Tần số kéo ra không tải:> 1000Hz Mô-men xoắn kéo vào:> 34,3mN.m (120Hz) Mô-men xoắn phát hiện:> 34,3mN.m Nhiệt độ tăng: <40K (120Hz) Tiếng ồn: <40dB (120Hz, Không tải, 10cm) Kích thước bảng: Xấp xỉ. 29 x 21 mm Đóng gói: 1 x bảng điều khiển ULN2003 1 x động cơ

♡ Welcome To flowerofflow ♡ Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Welcome to my shop, wish you have a happy day!!! [shengfeia]28BYJ-48 5V Reduction Step Gear Stepper Motor 4 Phase 28byj 28byj48 for arduino Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

❄ Welcome To Chitengyesuper ❄ Feature: Rated Voltage: DC5V 4-phase Step angle: 5.625 x 1/64 DC Resistance: 200ω±7% (25C) Insulation Resistance: >10Mω (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Cable length :23.5CM ULN2003 Driver Board: A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Drive Module Board Size:2.8cm x 2.8cm x 2cm What's in the package: 1 Pc * stepper motor 1 Pc * ULN2003 Driver

🐳🐳Welcome to {buildvitbghy}, your support is our greatest driving force, we will definitely give you the most comfortable shopping experience!!!🐳🐳 ==========================={buildvitbghy}========================= Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

Động Cơ Bước 28BYJ-48 5V 12V 4 Phase Cho Arduino - Kích thước: Đường kính 28mm, chiều cao 19mm, chiều dài trục 7.5mm - Điện áp hoạt động: 5VDC/ 12VDC - Góc nhìn / step: 5.626 x 1/64 - Số đầu vào điều khiển step: 4 - Số step: 64 - DC kháng: 200Ω ± 7% (25 ℃) - Điện trở cách điện: > 10MΩ (500V) - Cường độ điện môi: 600VAC/1mA/1s - Tần số khi tải kéo: > 600Hz - Tần số không tải: > 1000Hz - Mô-men xoắn: > 34.3mN.m (120Hz) - Tiếng ồn : <40dB (120Hz, không tải, 10cm) - khối lượng: Khoảng 32g #dientu4u #dong_co_buoc #28

Description: * DC 12V 4-Phase Stepper Motor + Driver Test Module Board For Arduino *The Driver Board Has A, B, C, D Four-Phase LEDs To Indicate The Working State Of The Stepper Motor *Stepper Motor With Standard Interface, Can Be Directly Plugged And Used * Durable And Reliable * 100% Brand New And High Quality Product Specifications: *Color: As Shown In The Picture *Rated Voltage: DC12V 4 Phase *Step Angle: 5.625 X 1/64 * No-Load Pull-In Frequency: &gt; 600Hz *No-Load Pull-Out Frequency: &gt; 1000Hz * Pulling Torque: &gt; 34.3mN.M (120Hz) *Brake Torque: &gt; 34.3mN.M *DC Resistance: 200Ω±7% (25C) *Insulation Resistance: &gt;10MΩ (500V) * Dielectric Strength: 600V AC / 1mA / 1s *Insulation Class: A * Temperature Rise: &lt;40K (120Hz) *Noise: &lt;40dB (120Hz, No Load, 10cm) Specifications: Material: Plastic Color: Silver Plus Blue Size: Dimensions Φ24*19(Mm) Package Included: 1*12V 24BYJ48 Micro Stepper Motor Note: -Due To The Manual Measurement And Different Measurement Methods, Please Allow 2-3mm Deviation. 2.Please Be Reminded That Due To Lighting Effects And Monitor'S Brightness/Contrast Settings Etc, The Color Tone Of The Website'S Photo And The Actual Item Could Be Slightly Diffe

Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S

28BYJ-48 DC 5V Reduction Step Gear Stepper Motor 4 Phase 28byj 28byj48 for arduino Diy Kit Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: Silver #5V #4-phase #5-wire #stepper #motor #gear #motor #28BYJ-48-5V #Micro #Mini #Electric #Step #Motor #for #PIC #

Description: Rated Voltage: DC5V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625/64 DC Resistance: 200±7% (25) Insulation Resistance: >10M (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 29 ×21 mm Package Included: 1pcs X ULN2003 Driver board 1pcs X Stepper

🐫🐫Dear friends, {iffarmerrtr} has opened! ! ! Warmly welcome all of you to come and patronize. I will bring you the best shopping experience with my most sincere service! ! !🐫🐫 ======================{iffarmerrtr}====================== Gear Stepper Motor DC 5V 4 Phase Step Motor Reduction Step Motor Brand new and high quality. Diameter: 27mm. Voltage: 5V. Step angle: 5.625 x 1/64. Reduction ratio: 1/64. 5 lines cable 4 phase stepper motor can be driven by ULN2003 chip. It also can be connected as 2 phase to use. Original box: No Color: S