Download ftdi

It works great for programming microcontrollers such for Arduino, boarduino, Bareduino, Raspberry Pi, ESP8266, Mini minimOSD, and Atmel Xmega Xplained, Atmega328 mini pro, or any other that can be programmed over serial After installing the driver,This FTDI TTL adapter will simulate a COM port on your computer/laptop. Through this simulated COM port, you can communicate or program with various hardware or MCUs, such for Arduino board, Raspberry Pi, ESP8266, router and so on. Main chip: FTDI FT232BL Pin Definition: CTS,RTS,RXD,TXD,GND,VCC Output VCC: 3.3V or 5V USB interface: 2.0 With 500MA self-recovery fuse reversed does protection The maximum speed: 921600bps List of supported systems Windows xp,7,8,10 Ubuntu 11.10, kernel 3.0.0-19 Mac OS X 10.3 to 10.8 (32 &64 bit) Mac OS X 10.9 and above(64 bit) Instructions for use:(Example MCU) GND: Connect to GND RXD: Connect to MCU.TX (Signal Flow: MCU.TX Greater than Greater than FT232 Greater than Greater than PC.RX) TXD: Connect to MCU.RX (Signal Flow: MCU.RX Less than Less than FT232 Less than Less than PC.TX) 3V3/5V: Output 3.3V or 5V (ule powered by USB, jumper cap :to 3.3V or 5V) RTS: Connect to MCU.CTS (Signal Flow Direction: MCU.CTS Less than Less than FT232 Less than Less than PC.RTS) CTS: Connect to MCU.RTS (Signal Flow: MCU.RTS Greater than Greater than FT232 Greater than Greater than PC.CTS) Material:plastic colour:Black+gold Package Contents: 1 x Adapter ule 1 x 5Pin Dupont Line(Note: Random color, don't accept the specified color.)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB. The cables are available with a 6-way SIL, 0.1inch connector TTL levels is 3.3V The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD's FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB Each TTL-232R cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications . Cables are available with either a 6-way SIL,0.1inch pitch connector, a 3.5mmAudio Jack, an 8 way, keyed 2mmpitch connector (intended for use with VMUSIC2 or VDRIVE2) or bare, tinned wire ended connections The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.0m long and supports a data transfer rate up to 3 Mbaud Red wire: 5V Black wire: GND White wire: RXD Green wire: TXD Yellow wire: RTS Blue wire: CTS Colour:black Material:plastic Package Contents: 1* 6Pin FTDI FT232RL FT232 uleOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

It works great for programming microcontrollers such for Arduino, boarduino, Bareduino, Raspberry Pi, ESP8266, Mini minimOSD, and Atmel Xmega Xplained, Atmega328 mini pro, or any other that can be programmed over serial After installing the driver,This FTDI TTL adapter will simulate a COM port on your computer/laptop. Through this simulated COM port, you can communicate or program with various hardware or MCUs, such for Arduino board, Raspberry Pi, ESP8266, router and so on. Main chip: FTDI FT232BL Pin Definition: CTS,RTS,RXD,TXD,GND,VCC Output VCC: 3.3V or 5V USB interface: 2.0 With 500MA self-recovery fuse reversed does protection The maximum speed: 921600bps List of supported systems Windows xp,7,8,10 Ubuntu 11.10, kernel 3.0.0-19 Mac OS X 10.3 to 10.8 (32 &64 bit) Mac OS X 10.9 and above(64 bit) Instructions for use:(Example MCU) GND: Connect to GND RXD: Connect to MCU.TX (Signal Flow: MCU.TX Greater than Greater than FT232 Greater than Greater than PC.RX) TXD: Connect to MCU.RX (Signal Flow: MCU.RX Less than Less than FT232 Less than Less than PC.TX) 3V3/5V: Output 3.3V or 5V (ule powered by USB, jumper cap :to 3.3V or 5V) RTS: Connect to MCU.CTS (Signal Flow Direction: MCU.CTS Less than Less than FT232 Less than Less than PC.RTS) CTS: Connect to MCU.RTS (Signal Flow: MCU.RTS Greater than Greater than FT232 Greater than Greater than PC.CTS) Material:plastic colour:Black+gold Package Contents: 1 x Adapter ule 1 x 5Pin Dupont Line(Note: Random color, don't accept the specified color.)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

It works great for programming microcontrollers such for Arduino, boarduino, Bareduino, Raspberry Pi, ESP8266, Mini minimOSD, and Atmel Xmega Xplained, Atmega328 mini pro, or any other that can be programmed over serial After installing the driver,This FTDI TTL adapter will simulate a COM port on your computer/laptop. Through this simulated COM port, you can communicate or program with various hardware or MCUs, such for Arduino board, Raspberry Pi, ESP8266, router and so on. Main chip: FTDI FT232BL Pin Definition: CTS,RTS,RXD,TXD,GND,VCC Output VCC: 3.3V or 5V USB interface: 2.0 With 500MA self-recovery fuse reversed does protection The maximum speed: 921600bps List of supported systems Windows xp,7,8,10 Ubuntu 11.10, kernel 3.0.0-19 Mac OS X 10.3 to 10.8 (32 &64 bit) Mac OS X 10.9 and above(64 bit) Instructions for use:(Example MCU) GND: Connect to GND RXD: Connect to MCU.TX (Signal Flow: MCU.TX Greater than Greater than FT232 Greater than Greater than PC.RX) TXD: Connect to MCU.RX (Signal Flow: MCU.RX Less than Less than FT232 Less than Less than PC.TX) 3V3/5V: Output 3.3V or 5V (ule powered by USB, jumper cap :to 3.3V or 5V) RTS: Connect to MCU.CTS (Signal Flow Direction: MCU.CTS Less than Less than FT232 Less than Less than PC.RTS) CTS: Connect to MCU.RTS (Signal Flow: MCU.RTS Greater than Greater than FT232 Greater than Greater than PC.CTS) Material:plastic colour:Black+gold Package Contents: 1 x Adapter ule 1 x 5Pin Dupont Line(Note: Random color, don't accept the specified color.)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1