Dieu khien dong co buoc 5

Hello everyone, we are Reland Tech, we are mainly engaged in electronic components, electronic tools, bakery products. Customers can contact us for more product information. If there is any dissatisfaction, you can leave us a comment. We will actively correct, of course, thank you for your sincere evalua

【RC Kuduer】28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN 28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Driver Board Description: This is 28YBJ-48 DC 5V 4 phase 5 wire stepper motor with ULN2003 driver board 5-wire phase can drive ordinary uln2003 chip can also be connected as phase 2 may be supporting the development board, direct plug, easy to use stepper motor used in the development board If you need English file for this product, please write email to [email protected] Motor: Diameter: 28mm Voltage: 5V Step angle: 5.625 x 1/64 Reduction ratio: 1/64 ULN2003 driver board: A, B, C, D LED indication Four-phase stepper motor work status Size: 31x35mm Package included: 1 x ULN2003 driver board 1 x 28BYJ-48 stepper moto

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealhop2 ultra-quiet technology is widely used in 3D printing. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 8729, lower heat, especially for 3D printing market. With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). colour: blue + white Material: aluminum alloy + PCB Package Contents: 5 X TMC2208 V1.2 Stepper Motor Driver 5 X Heat Sink 1 X ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

❤ * ❤ * ❤ * Welcome to #RRIANFO *❤ * ❤ * ❤ ★★★★Surprises for you★★★★ ☛Follow Shop；Free gift for you！ ☛High comment: Priority Shipping + 5% discount for next order！ ☛Shipping within 1-24 hours! ☛Ready stock and fast shipping! ☛wish you a happy shopping! ❤ * ❤ * ❤ * information *❤ * ❤ * ❤ Features: The current is selected by the dialing switch. Seven kind of micro-steps are adjustable. Automatic half current reduces heat. Large area heat sink can effectively dissipate heat. Strong resistance to high frequency interference. Input voltage anti-reverse protection. Over heat, over current and short circuit protection. Specification: Input voltage: DC9-40V Input current: 5A(recommended) Output current: 0.5-4A Max. power: 160W Micro-step: 32 micro step Size: Approx. 9.5*7*2.7cm / 3.7*2.7*1inch Weight: 148g Quantity: 1pc Package List: 1 x Stepper Motor Dri

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Thông tin chi tiết:     Cho động cơ bước điều khiển với nguồn điện 8.2-45V DC. Dòng điện tối đa là 2,5A.     Với 6 chế độ bước khác nhau, toàn công sức, một nửa, 1/4, 1/8, 1/16 và 1/32.     Bảo vệ mạch ngắn và tiếp đất.     Tắt khi quá nhiệt, bảo vệ điện áp thấp và bảo vệ dòng điện chéo.     Điều chỉnh chiết áp cho đầu ra dòng điện tối đa có tốc độ bước cao hơn.        Thông tin chi tiết:     Màu sắc: tím     Chất liệu: Kim loại     Chế độ bước: 1, 1/2, 1/4, 1/8, 1/16 và 1/32     Kích thước sản phẩm phẩm: 2 * 1,5 * 1cm / 0,78 * 0,59 * 0,39in (mỗi cái)     Trọng lượng sản phẩm: 2g / 0,07oz (mỗi)     Kích thước gói hàng: 8 * 6 * 1.5cm / 3.1 * 2.4 * 0.6in     Trọng lượng gói hàng: 16g / 0,56oz       Gói hàng bao gồm:    5 x Mô-đun điều khiển DRV8825    5 x Tản

Description: Rated Voltage: DC5V 4-phase Reduction Ratio: 1/64 ULN2003 Darlington using high-power stepper motor driver chip. A, B, C, D four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. Specification: Step Torque Angle: 1/64 DC Resistance: 200Ω±7% (25C) Insulation Resistance: ≥10MΩ (500V) Dielectric Strength: 600V AC / 1mA / 1s Insulation Grade: A No-load Pull in Frequency: ≥600Hz No-load Pull out Frequency: ≥1000Hz Pull in Torque: ≥34.3mN.m(120Hz) Detent Torque: ≥34.3mN.m Temperature Rise: ≤(120Hz) Noise: ≤40dB (120Hz, No load, 10cm) Cable length :23.5CM Size:42x33x30 mm / 1.65x1.29x1.18 inch Package Includes: 10x motor 10x ULN2003 driver

100% brand new and high quality Features: Made of high quality electronic components, it is solid, durable and good performance, long service life. This driver board can drive 2-phase 4 wire/4-phase 5 wire stepper motors. It features 4 working modes: Normal Mode 1, Normal Mode 2, Jog Mode and Automatic Round-trip Mode. Comes with wire for convenient use. Driver board only, other accessories demo in the picture is not included! Specification: Material: Circuit Board, Electronic Components Voltage range: DC 5-12V Rated current: Less than 800mA Protections: Anti-reverse connection protection, Over current protection, High temperature protection Size: app.6 x 4.4cm/2.36 x 1.73in Color: Green Quantity: 1 Set Note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Stepper Motor Driver Board 1 x

Description: Tthe output current is infinitely adjustable to meet your various application requirements Automatic half current function. And the semi-automatic flow switch is also available, easy to use The use of high-speed optical coupling 6N137 ensure high-speed without losing step printed on the back panel are subdivided setup instructions Used to increase the heat sink, good heat dipation Output short-circuit protection, the use of mind Using common anode input mode, there are two input terminals, wiring more convenient Specifications: Material: Meatal and plastic Size:  50*82*35 mm (Width * Length * High ) Color: green and white Operating voltage DC 10V-45V. DC32V switching power supply is recommended high-speed optical coupling 6N137, ensure high speed without losing step Toshiba's new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560 Rated maximum output reached: ± 4.5A For 4.2A 42,57,86 within the two-phase / four-phase / four-wire / six-wire stepper motor Automatic half current function Subdivision: full step, half step, 1/4-step, 1/8-step, 1/16-step, up to 16 segments Package includes: 1 x TB6600 4.5A CNC Single-axis stepper Motor Driver Board Contr

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Mô đun điều khiển động cơ bước với tín hiệu sóng vuông hình chữ nhật NE555 tạo xung điều chỉnh Đầu tiên, mục đích của mô đun này: 1. Được sử dụng để phát tín hiệu sóng vuông để phát triển thử nghiệm sử dụng. 2. Được sử dụng để tạo động cơ bước với tín hiệu sóng vuông. 3. Tạo xung điều chỉnh cho MCU sử dụng. 4. Tạo ra xung có thể điều chỉnh, mạch điều khiển có liên quan. Thứ hai, mô tả ngắn gọn: 1, Kích thước: 3.1CM * 2.2CM 1, Chip chính: NE555; 2, Điện áp đầu vào: 5V-15VDC. Nguồn điện 5V, dòng điện đầu ra có thể khoảng 15MA; khi nguồn điện 12V, dòng điện đầu ra có thể khoảng 35MA; 3, Dòng điện đầu vào: ≥100MA 4, Biên độ đầu ra: 4.2V V-PP đến 11.4V V-PP (khác nhau tùy thuộc vào điện áp đầu vào, biên độ đầu ra sẽ khác nhau) 5, Dòng điện đầu ra tối đa: ≥15MA (nguồn điện 5V, V-PP lớn hơn 50%), ≥35MA (nguồn điện 12V, V-PP lớn hơn 50%) Ưu điểm: 1, Đầu ra có đèn LED, không có đầu ra thẳng (số lượng LED mức thấp, LED mức cao, đèn LED nhấp nháy khi tần số thấp); 2, Tần số đầu ra có thể lựa chọn, tần số đầu ra được điều chỉnh liên tục; Tệp LF: 1Hz ~ 50Hz Tệp IF: 50Hz ~ 1kHz Thiết bị tần số cao: 1KHz ~ 10kHz Cấu hình tần số cao: 10kHz ~ 200kHz 3, Chu kỳ hoạt động đầu ra có thể được điều chỉnh, chu kỳ hoạt động và tần số không được điều chỉnh riêng, điều chỉnh chu kỳ hoạt động sẽ thay đổi tần số; 4, Tần số đầu ra có thể điều chỉnh; Chu kỳ T = 0,7 (RA + 2RB) C RA, RB cho 0-10K có thể điều chỉnh; Ở mức tần số thấp C = 0,001UF; NẾU ở mức khi C = 0,1UF; Tần số cao C = 1UF; Khi thiết bị tần số cao C = 100UF, người mua tần số dạng sóng có thể sở hữu các phép tính. Gói hàng bao gồm: 1 * Mô đun điều khiển động cơ bước NE555 Trước khi mua: 1. Tất cả hàng hóa đang có sẵn trong kho và chúng tôi sẽ gửi ngay lập tức nếu chúng tôi nhận được đơn đặt hàng. 2. Xin vui lòng đọc mô tả sản phẩm, nếu bạn có bất kỳ câu hỏi, đừng ngần ngại liên hệ với chúng tôi. Sau khi mua: 1. Nếu bạn hài lòng hãy cho chúng tôi lời khen 5 sao. 2. Xin vui lòng liên hệ với chúng tôi trước khi bạn cho chúng tôi bình luận tiêu cực. Chúng tôi rất có trách nhiệm và sẽ giải quyết mọi vấn đề cho bạn. Nếu bạn nhận được một sản phẩm bị lỗi, xin vui lòng liên hệ với chúng tôi kèm với hình ảnh hoặc video. #NE555 #pulse #frequency #adjustable #duty #cycle #square #wave #module #rectangular #wave #signal #generator #stepper #motor #d

Stepper motor control card with ULN2003 chip The four-phase LED indicates the status of the stepper motor operation. Stepper motor with a standard interface, when used directly pluggable. 5 Line 4 phase can be powered by ordinary uln2003 chip, can also be plugged into the 2 phase development board used for Orting using a direct plug and easy to use stepper motor used on the development board. Specification: Nominal voltage: DC 5V 4 phase Step angle: 5.625x1 / 64 DC resistance: 200 ohm ± 7% (25C) Insulation resistance:more than the 10 M ohm (500 V) Dielectric strength: 600 V AC / 1mA / 1 s Insulation grade: Extraction frequency without load:more than the 600Hz Extraction frequency without load:more than the 1000Hz Traction at torque:more than the 34.3mn. m (120Hz) Stable torque:more than the 34.3mn. m Temperature rise: Less than 40K (120Hz) Noise: Less than 40 dB (120Hz, no load, 10 cm) Colour:Green Material:PC + metal Package Contents: 5 x Driver Boards 5 x Stepper Motors 5 x Dupont CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

______________♤Welcome Superparis Store♤_______________ ✔Ready Stock!!Buy Now! ✔Quality Checked ✔Best price ★Surprises for you★ ✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug) ➷Wholesale retailers are welcome to negotiate long-term business with us! __________________❀Product Information❀__________________ Features: This module is supplied as a stepper drive signal. To control the stepper motor, but also must have the drive to use. The controller has high, medium and low total of three types of frequency signals can be used to select jumper. Frequency of measurement can amount PUL and common cathode terminal (GND) two ports. PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions. These six lines are connected to drive the corresponding pulse, direction, so six ports possible. Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End. The forward and reverse of the motor can be controlled by pressing the key. The speed of the motor can be controlled by adjusting the frequency of the potentiometer. Specification: Power supply voltage: 15-160V / 5-12V Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch Weight: 50g Quantity: 1pc Package List: 1 x PWM Generator Note: If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode d

For StepStick and Pololu A4988 compatible hardware Drive capability up to 1.7A (RMS) continuous coil current -2.8A peak Step / Dir interface with microstep interpolation (up to 256 microsteps) Configure via CFG pin or UART interface stealhop2-for quiet operation and smooth motion Extended period-high dynamic motor control chopper (available through UART, OTP, CFG pins Enable) coolStep-current control to save energy Stall Guard4-sensorless motor load detection TMC2209 is an ultra-quiet motor driver IC for two-phase stepper motors. TMC2209 is pin compatible with many traditional drivers and TMC2208. TRINAMICs' advanced Stealhop2 chopper ensures noise-free operation of the motor, achieving high efficiency and motor torque. Its combination of fast current regulation and resonance suppression function can achieve high dynamic movement. StallGuard is used to return to the origin without sensor to prevent stalling. The built-in power MOSFET can handle motor currents up to 2A RMS, with protection and diagnostic functions, and stable and reliable operation. An easy-to-use UART interface opens up tuning and control options. Store application tuning in OTP memory. The drive can be set for noise-free operation and very precise operation through a separate pulse direction, thereby achieving a cost-effective and highly competitive solution Colour:Blue+white Material:plastic Size:2.01x1.51cm Package Contents: 5 x TMC2209 V3.0 5 x radiatorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For StepStick and Pololu A4988 compatible hardware Drive capability up to 1.7A (RMS) continuous coil current -2.8A peak Step / Dir interface with microstep interpolation (up to 256 microsteps) Configure via CFG pin or UART interface stealhop2-for quiet operation and smooth motion Extended period-high dynamic motor control chopper (available through UART, OTP, CFG pins Enable) coolStep-current control to save energy Stall Guard4-sensorless motor load detection TMC2209 is an ultra-quiet motor driver IC for two-phase stepper motors. TMC2209 is pin compatible with many traditional drivers and TMC2208. TRINAMICs' advanced Stealhop2 chopper ensures noise-free operation of the motor, achieving high efficiency and motor torque. Its combination of fast current regulation and resonance suppression function can achieve high dynamic movement. StallGuard is used to return to the origin without sensor to prevent stalling. The built-in power MOSFET can handle motor currents up to 2A RMS, with protection and diagnostic functions, and stable and reliable operation. An easy-to-use UART interface opens up tuning and control options. Store application tuning in OTP memory. The drive can be set for noise-free operation and very precise operation through a separate pulse direction, thereby achieving a cost-effective and highly competitive solution Colour:Blue+white Material:plastic Size:2.01x1.51cm Package Contents: 5 x TMC2209 V3.0 5 x radiatorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For StepStick and Pololu A4988 compatible hardware Drive capability up to 1.7A (RMS) continuous coil current -2.8A peak Step / Dir interface with microstep interpolation (up to 256 microsteps) Configure via CFG pin or UART interface stealhop2-for quiet operation and smooth motion Extended period-high dynamic motor control chopper (available through UART, OTP, CFG pins Enable) coolStep-current control to save energy Stall Guard4-sensorless motor load detection TMC2209 is an ultra-quiet motor driver IC for two-phase stepper motors. TMC2209 is pin compatible with many traditional drivers and TMC2208. TRINAMICs' advanced Stealhop2 chopper ensures noise-free operation of the motor, achieving high efficiency and motor torque. Its combination of fast current regulation and resonance suppression function can achieve high dynamic movement. StallGuard is used to return to the origin without sensor to prevent stalling. The built-in power MOSFET can handle motor currents up to 2A RMS, with protection and diagnostic functions, and stable and reliable operation. An easy-to-use UART interface opens up tuning and control options. Store application tuning in OTP memory. The drive can be set for noise-free operation and very precise operation through a separate pulse direction, thereby achieving a cost-effective and highly competitive solution Colour:Blue+white Material:plastic Size:2.01x1.51cm Package Contents: 5 x TMC2209 V3.0 5 x radiatorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

--------------------------------------------- *Welcome Dioo Store* ---------------------------------------------- ❀We insist on giving you the best products at the lowest price❀ ✔Ready to sent ✔High quality ✔Best price ☛Free Gifts:Follow Shop ☞PS: If you want a free gift, please send me the screenshot that you follow my shop and leave a message on your order. --------------------------------------------------- * Product * --------------------------------------------------- Feature: 1. The PCB copper coating process is upgraded to 2oz (copper thickness is 70um, normal is 35um). 2. With high copper content, the heat dissipation performance is of course better. 3. Good quality, soldered and gold‑plated pin headers, strong and durable, has a long service life. 4. SMT placement machine manufacture, higher yield rate and more stable performance. 5. Small size, easy to carry and store, convenient to use and with 5pcs module, can meet your use demand. Specification: Item Type: Stepper Motor Driver ModuleWeight: Approx. 3.7 g / 0.1 oz (with heat sink) Special Note: Red board Rs is 0.1Ω, current upper limit is 2A Package List: 5 x Stepper Motor Driver Module5 x Aluminum Bl

Working Mode:1. Normal Mode 1: S1 start stop button, S2 forward and reverse button, W2 potentiometer speed control. If limit reversal is required, two limit switches can be connected to the P3 pin, and the motor motion shaft is mounted with contacts, so that the motor will reciprocate within the stroke between the two limit switches. 2. Normal Mode 2: S1 forwards the start button, S2 reverses the start button, press any button to stop. W2 potentiometer speed regulation. If the limit stop is required, two limit switches can be connected to the P3 pin, so that the motor will stop moving when it touches the limit switch, and the motor will reverse after the opposite button is clicked. 3. Jog Mode: S1 presses the forward rotation, releases the stop, S2 presses the reverse rotation, releases the stop, and the W2 potentiometer adjusts the speed. If a limit stop is required, the upper limit switch can be connected to P3. 4. Automatic Round-trip Mode: S1 starts and stops, S2 is reversed, W2 potentiometer speeds, and W1 potentiometer adjusts the automatic round-trip steps. After starting, the motor automatically runs back and forth within the number of steps adjusted by W1 Voltage Range: DC 5V-12V Rated Current: Less than or equal to 800mA Power Reverse Connection Protection: yes Over-current Protection: yes Overheat Protection: yes Fine workmanship and good performance. Easy to use. Long service life. Color: green Material: metal + PC Package Contents: 1* Motor Driver Board 1* DuPont lineOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For StepStick and Pololu A4988 compatible hardware Drive capability up to 1.7A (RMS) continuous coil current -2.8A peak Step / Dir interface with microstep interpolation (up to 256 microsteps) Configure via CFG pin or UART interface stealhop2-for quiet operation and smooth motion Extended period-high dynamic motor control chopper (available through UART, OTP, CFG pins Enable) coolStep-current control to save energy Stall Guard4-sensorless motor load detection TMC2209 is an ultra-quiet motor driver IC for two-phase stepper motors. TMC2209 is pin compatible with many traditional drivers and TMC2208. TRINAMICs' advanced Stealhop2 chopper ensures noise-free operation of the motor, achieving high efficiency and motor torque. Its combination of fast current regulation and resonance suppression function can achieve high dynamic movement. StallGuard is used to return to the origin without sensor to prevent stalling. The built-in power MOSFET can handle motor currents up to 2A RMS, with protection and diagnostic functions, and stable and reliable operation. An easy-to-use UART interface opens up tuning and control options. Store application tuning in OTP memory. The drive can be set for noise-free operation and very precise operation through a separate pulse direction, thereby achieving a cost-effective and highly competitive solution Colour:Blue+white Material:plastic Size:2.01x1.51cm Package Contents: 5 x TMC2209 V3.0 5 x radiatorOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Mega 2560 R3 + 1pcs RAMPS 1.4 Controller + 5pcs A4988 Stepper Driver Module + LCD 12864 + MK2B for 3D Printer kit Package Included: 1 X mega 2560 R3 1 X Ramps 1.4 1 X usb line 5 X A4988 module with heatsink 1X PCB Heatbed MK2B 1 X 12864 LCD control panel 1 X adapter 2 X

5-12V ULN2003 Stepper Motor Driver Module ULN2003A Brand new with high quality Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: ≈40×20 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor d

Highlights: Two independent PWM generators can set the frequency, duty cycle; The wide frequency range, high accuracy; Can serial communication. First, the module description: Frequency is divided into three ranges: XXX (no decimal point): the smallest unit is 1Hz, the range 1Hz ~ 999Hz; XX.X (decimal point in ten): The minimum unit is 0.1Khz; the range of 0.1KHz ~ 99.9KHz X.X.X. (there are three decimal point): the smallest unit is 1Khz; the range 1KHz ~ 150KHz Frequency display example: "100" indicates that the PWM output pulse of 100Hz; "54.1" indicates that the PWM output pulse of 54.1KHz; "1.2.4." Indicates that the PWM pulse output 124KHz Duty Cycle in the range: 0 to 100; Three frequencies duty cycle is the same, all the parameters non-volatile. Second, the module parameters: Working voltage: 5--30V, support micro USB 5.0V power supply; Frequency range: 1Hz ~ 150KHz; The frequency accuracy: ± 2%; Output Current: <30mA; Output amplitude: Default 5Vp-p (settable); Operating temperature range: -30 ~ + 70 °. Third, the parameter settings: Module has three buttons [Set], [Up], [Down]; Press [Set] key to switch the display four parameters (FR1: PWM1 frequency; dU1: PWM1 duty cycle; FR2: frequency of PWM2; dU2: PWM2 duty cycle), before the handover parameters, there will be corresponding parameter name flash. Press [Up], [Down] keys to modify the current parameter value (long press can quickly add or subtract fast). Two PWM each have three preset frequency, the frequency display interface, long press [SET] key to switch between three types of frequencies, three kinds of frequency duty cycle is the same value. (XXX: range 1Hz ~ 999Hz; XX.X: range 0.1Khz ~ 99.9Khz; X.X.X .: range 1Khz ~ 150Khz,). Fourth, the scope: As square wave signal generator which generates a square wave signal; to provide a signal to the stepping motor driver; Adjustable pulse generation for chip use; produce variable pulse signal, the control-related circuit (PWM dimming, speed). Fifth, the serial control Baud rate: 9600 bps Data bits: 8 Stop bits: 1 Parity bit: none Flow control: none 1, set the PWM frequency "S1FXXXT": setting PWM1 frequency of XXX HZ (001 ~ 999) "S1FXX.XT": set the frequency of PWM1 XX.X KHZ (00.1 ~ 99.9) "S1F: X.X.X.T": setting PWM1 frequency of XXX KHZ (0.0.1 ~ 1.5.0..) 'S1': PWM1 'S2': PWM2 'F': Frequency 'D': Duty Cycle 'T' is the end flag Set the PWM duty cycle "S1DXXXT": setting PWM1 duty cycle XXX; (001 ~ 100) "S2DXXXT": set PWM2 duty cycle XXX; (001 ~ 100) Setting successful return: DOWN; Setting failback: FALL. Package Included: 1 x 2 way Independent PWM Gene

Features: TMC2208 is an ultra-quiet two-phase stepper motor driver chip with continuous drive current of 1.2A, peak current of 2A, voltage range of 4.75-36V, 256 subdivision. The flexible microplyer interpolation unit provides up to 256 subdivisions, perfect for sinusoidal control even in systems with limited pulse frequency. Since the stealthChop2 ultra-quiet technology is widely used in 3D printing, the design of these components is also compatible with existing 3D printer electronics, eliminating the costly cost of redesign. With a standard step / dir interface, it is simple and convenient to use. Configuration is achieved through digital input. The TMC2208 driver module can replace the original TMC2100, A4988, DRV8825, LV8729. Specifications: Motor Voltage: 4.75-36V Interface Input Voltage: 3-5V Subdivide: 256 Interface: Step/ dir Item Size: 2 * 1.5 * 1cm/ 0.78 * 0.59 * 0.39in(each) Item weight: 2g/ 0.07oz(each) Item Size: 12 * 8 * 1.5cm/ 4.7 * 3.1 * 0.6in Item Weight: 34g/ 1.2oz Package List: 5 * TMC2208 V1.2 Driver Module 5 * Heat Sink 1 * Screwd

Stepper motor driver board with ULN2003 chip. Four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. 5 line 4 phase can be driven by ordinary uln2003 chip, can also be connected in phase 2 development board used for. Supp orting the use of a direct plug and easy to use stepper motor used in the development board. Rated voltage: DC 5V 4-phase Step angle: 5.625 x 1/64 DC resistance: 200ohm±7% (25C) Insulation resistance: Greater than10Mohm (500V) Dielectric strength: 600V AC / 1mA / 1s Insulation grade: A No-load pull in frequency: Greater than600Hz No-load pull out frequency: Greater than1000Hz Pull in torque: Greater than34.3mN.m(120Hz) Detent torque: Greater than34.3mN.m Temperature rise: Less than 40K(120Hz) Noise: Less than 40dB (120Hz, No load, 10cm) Colour:multicolor Material: ABS Size:10 x 6 x 3cm Package Contents: 5 x Driver BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Linh kiện Trung Thanh - Linh kiện thiết bị học tập giá tốt Trình điều khiển động cơ bước đơn trục   1. việc sử dụng chip Toshiba TB6560 nhập khẩu mới của Nhật Bản; 2.Cơ sở sử dụng bộ tản nhiệt răng dày đặc, làm mát siêu tốc, để đảm bảo thiết bị hoạt động ổn định; 3. tín hiệu đầu vào sử dụng cách ly quang tốc độ cao để đảm bảo không bị mất các bước, mà tín hiệu hướng xung có cùng mức 6N137, bộ ghép quang tốc độ cao kép; 4. một loạt các chế độ bán dòng và lựa chọn dòng chảy nửa dòng, sử dụng linh hoạt hơn Chế độ 5.Decay được điều chỉnh để đảm bảo động cơ chạy trơn tru; 6. Kích thước chính xác, kích thước miếng làm mát: 75mm * 65mm, bốn kích thước lỗ định vị lắp đặt cơ khí là: 67mm * 58, đường kính lỗ lắp là 4mm 7. Đặt phương pháp bảng chi tiết trên bảng, dễ sử dụng; 8.Với mạch chống đảo ngược, ngay cả khi không cẩn thận cắm lại nguồn và không làm cháy chip, nó rất an toàn khi sử dụng. Chúc các bạn có một trải nghiệm học tập tuyệ

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealhop2 ultra-quiet technology is widely used in 3D printing. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 8729, lower heat, especially for 3D printing market. With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). colour: blue + white Material: aluminum alloy + PCB Package Contents: 5 X TMC2208 V1.2 Stepper Motor Driver 5 X Heat Sink 1 X ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Stepper motor driver board with ULN2003 chip. Four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. 5 line 4 phase can be driven by ordinary uln2003 chip, can also be connected in phase 2 development board used for. Supp orting the use of a direct plug and easy to use stepper motor used in the development board. Rated voltage: DC 5V 4-phase Step angle: 5.625 x 1/64 DC resistance: 200ohm±7% (25C) Insulation resistance: Greater than10Mohm (500V) Dielectric strength: 600V AC / 1mA / 1s Insulation grade: A No-load pull in frequency: Greater than600Hz No-load pull out frequency: Greater than1000Hz Pull in torque: Greater than34.3mN.m(120Hz) Detent torque: Greater than34.3mN.m Temperature rise: Less than 40K(120Hz) Noise: Less than 40dB (120Hz, No load, 10cm) Colour:multicolor Material: ABS Size:10 x 6 x 3cm Package Contents: 5 x Driver BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Feature: 1. Suitable for all kinds of small and medium-sized automation equipment and instruments, such as engraving machine, marking machine, cutting machine, phototypesetting, plotter, CNC machine tools, automatic assembly equipment, small noise, high speed. 2. With 32 bit digital signal processing technology, users can set any subdivision within 512 and any current value within the rated current, which can meet the application needs of most occasion. 3. Using built-in micro-segmentation technology, even in the condition of low subdivision, can also achieve the effect of high subdivision, low, medium and high speed operation is very stable, ultra-low noise. 4. The automatic parameter setting function is integrated in the drive, can automatically generate optimal operating parameters for different motors, limit the performance of the motor. 5. Professional manufacturing, stable characteristics and high reliability. Specification: Condition: 100% Brand New Item Type: Stepper Motor Driver Model: DM556C Material: Alloy Color: As Pictures Shown Quantity: 1PCSVoltage: 20－50V DCWeight: Approx. 273g Package List: 1 x Stepper Motor Dri

Welcome to our shop 👑Kingzizi👑, all the products in this shop are at a favorable price💕, and have quality assurance💕, you can rest assured to buy💕, we will give you the best and highest quality shopping experience! 🌹🌹🌹 NE555 pulse frequency adjustable duty cycle square wave module rectangular wave signal generator stepper motor driver First, this module Scope: 1. is used as a square wave signal generator generates a square wave signal for experimental development to use. 2. is used to generate drive stepper motor drives a square wave signal. 3. adjustable pulse generation for MCU to use. 4. generates an adjustable pulse, the control-related circuit. Second, a brief description: 1, Size: 3.1CM * 2.2CM 1, the main chip: NE555; 2, the input voltage: 5V-15VDC. 5V supply, the output current can be about 15MA; when 12V power supply, the output current can be about 35MA; 3, the input current: ≥100MA 4, the output amplitude:. 4.2V V-PP to 11.4V V-PP (different depending on the input voltage, the output amplitude will be different) 5, the maximum output current: ≥15MA (5V supply, V-PP greater than 50%), ≥35MA (12V power supply, V-PP greater than 50%) Advantages: 1, the output with LED indication, there is no output straightforward (low level LED quantity, high LED off, LED blinks when the frequency is low); 2, grade selectable output frequency range, the output frequency is more continuously adjustable; LF file: 1Hz ~ 50Hz IF file: 50Hz ~ 1kHz High frequency gear: 1KHz ~ 10kHz High frequency profile: 10kHz ~ 200kHz 3, the output duty cycle can be fine-tuning, duty cycle and frequency are not separately adjustable, adjusting the duty cycle will change the frequency; 4, the output frequency is adjustable; Cycle T = 0.7 (RA + 2RB) C RA, RB for 0-10K adjustable; At low frequencies stalls C = 0.001UF; IF stalls when C = 0.1UF; High-frequency gear C = 1UF; When high-frequency gear C = 100UF, therefore frequency waveform buyers can own calculations. Package Included: 1pcs * NE555 stepping motor driver module Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #NE555 #pulse #frequency #adjustable #duty #cycle #square #wave #module #rectangular #wave #signal #generator #stepper #motor #d

Part No:L293D Pin No: 16 pins Package included： 5 x L293D L293 L293B DIP/SOP Push-Pull Four-Channel Motor Driv

Stepper motor driver board with ULN2003 chip. Four-phase LED indicates the status of the stepper motor work. Stepper motor with a standard interface, when used directly pluggable. 5 line 4 phase can be driven by ordinary uln2003 chip, can also be connected in phase 2 development board used for. Supp orting the use of a direct plug and easy to use stepper motor used in the development board. Rated voltage: DC 5V 4-phase Step angle: 5.625 x 1/64 DC resistance: 200ohm±7% (25C) Insulation resistance: Greater than10Mohm (500V) Dielectric strength: 600V AC / 1mA / 1s Insulation grade: A No-load pull in frequency: Greater than600Hz No-load pull out frequency: Greater than1000Hz Pull in torque: Greater than34.3mN.m(120Hz) Detent torque: Greater than34.3mN.m Temperature rise: Less than 40K(120Hz) Noise: Less than 40dB (120Hz, No load, 10cm) Colour:multicolor Material: ABS Size:10 x 6 x 3cm Package Contents: 5 x Driver BoardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#DC #5V-12V #Micro #DC #Stepper #Motor #Driver #Board #2-Phase #4 #Wire/4-Phase #5 #Wire #Speed #Controller DC 5V-12V Micro DC Stepper Motor Driver Board 2-Phase 4 Wire/4-Phase 5 Wire Speed Controller Module DIY Tools with 4 Working Modes 100% brand new and high quality Features: Made of high quality electronic components, it is solid, durable and good performance, long service life. This driver board can drive 2-phase 4 wire/4-phase 5 wire stepper motors. It features 4 working modes: Normal Mode 1, Normal Mode 2, Jog Mode and Automatic Round-trip Mode. Comes with wire for convenient use. Driver board only, other accessories demo in the picture is not included! Specification: Material: Circuit Board, Electronic Components Voltage range: DC 5-12V Rated current: Less than 800mA Protections: Anti-reverse connection protection, Over current protection, High temperature protection Size: app.6 x 4.4cm/2.36 x 1.73in Color: Green Quantity: 1 Set Note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Stepper Motor Driver Board 1 x