Dht11 esp8266

Module Nhiệt Độ - Độ Ẩm DHT11 ESP8266-01s (K1I8-2) độ chính xác cao Module cảm biến nhiệt độ và độ ẩm DHT11 esp8266-01s là mdodule cảm biến được sử dụng phổ biến trong việc đo nhiệt độ và độ ẩm bởi độ chính xác cao, giá thành rẻ, dễ sử dụng. Thông số kỹ thuật của mạch cảm biến nhiệt độ - độ ẩm DHT11: Điện áp hoạt động: 3.7 - 12VDC, hỗ trợ pin lithium Dải đo: Nhiệt độ: 0 - 50 độ C Độ ẩm: 20 - 90 % Sai số: Nhiệt Độ: ± 2 ° Độ ẩm ±

Thông số kỹ thuật Module wifi ESP8266 - 01 Hỗ trợ chuẩn 802.11 b/g/n. Wi-Fi 2.4 GHz, hỗ trợ WPA/WPA2. Chuẩn điện áp hoạt động: 3.3V. Chuẩn giao tiếp nối tiếp UART với tốc độ Baud lên đến115200 Có 3 chế độ hoạt động: Client, Access Point, Both Client and Access Point. Hỗ trợ các chuẩn bảo mật như: OPEN, WEP, WPA_PSK, WPA2_PSK, WPA_WPA2_PSK. Hỗ trợ cả 2 giao tiếp TCP và UDP Làm việc như các máy chủ có thể kết nối với 5 máy con. Ứng dụng, chức năng của wifi esp8266 Giúp thiết bị trao đổi dữ liệu Internet thông qua mạng không dây. Có khả năng kết nối wifi, điều khiển các thiết bị khác từ Internet. Anten được thiết kế để có thể dễ dàng thu phát tín hiệu. Cách sử dụng của esp8266 Sơ đồ nối chân Module Wifi ESP8266 – 01 VCC: 3.3V lên đến 300mA GND: Chân nối đất Tx: Chân Tx của giao thức UART, kết nối đến chân Rx của vi điều khiển. Rx: Chân Rx của giao thức UART, kết nối đến chân Tx của vi điều khiển. RST: chân reset, kéo xuống mass để reset. CH_PD: Kích hoạt chip, sử dụng cho Flash Boot và updating lại module GPIO0: kéo xuống thấp cho chế độ update. GPIO2: không sử

Hello everyone, we are Reland Tech, we are mainly engaged in electronic components, electronic tools, bakery products. Customers can contact us for more product information. If there is any dissatisfaction, you can leave us a comment. We will actively correct, of course, thank you for your sincere evalua

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection node for smart home or IOT projects. Features:e * main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s) * temperature and humidity sensor: DHT11 * working voltage: DC 3.7 v-12v (support for 3.7V lithium battery) * measurement range: 20-90% RH 0 to 50 ° * accuracy of measurement: temperature: plus or minus 2 ° humidity + / - 5% RH We deal in wholesale and retail Feel free to contact us #ESP8266 #ESP-01 #ESP-01S #DHT11 #Sensor #M

ESP8266 DHT11 Temperature&Humidity Wifi Shield Sensor ule: Operating voltage: DC 3.7 V-12 V (support 3.7 v lithium battery power supply) Measuring range: 20-90% RH 0-50 Celsius Measurement accuracy: Temperature: +/- 2 Degree Humidity +/- 5% relative humdity ESP-01S ESP8266 Wifi WirelessTransmission ule: Operating Voltage: 3.0-3.6V(We recommended 3.3V) Operating Current: Average 80mA Operating Temperature: -40~125 Celsius Wireless Network e: station/softAP/SoftAP+station Safety e: WPA/WPA2 Encryption Type: WEP/TKIP/AES Network Protocol: IPV4,TCP/UDP/HTTP/FTP Application Example: 1. Power source: 3.7 V-12 V DC power supply connected to VCC GND (2.54mm pin) 2. Download the program to ESP-01S 3. Insert ESP-01 / ESP-01S into the 2 * 4 Pin Characteristic: Master: ESP-01 / ESP-01S (this ule does not include ESP-01 / ESP-01S) Temperature and humidity sensor: DHT11 Package list ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor ule x 1 Application example: 1. Power supply: 3.7V-12V DC power supply connected to VCC GND (2.54mm pin) 2. Download the program to ESP-01S 3. Insert ESP-01 / ESP-01S into the 2 * 4 Pin (in the direction of the arrow) 4. Temperature and humidity sent to another WiFi ule Package Included: 1 * DHT11 Temperature Humidity Wifi ule Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

DHT11 Pro Shield được thiết kế sẵn để sử dụng với phiên bản D1 mini ESP8266 có chức năng cảm biến độ ẩm và nhiệt độ qua cảm biến DHT11, giao tiếp với ESP8266, giao tiếp WIFI. Mạch có thiết kế nhỏ gọn, tiện lắp đặt với nhiều kiểu chân cắm khác nhau. Thông số kỹ thuật: Điện áp sử dụng: 5VDC. Chân kết nối data: D4. Kích thước: 34.2 x 25

This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection node for smart home or IOT projects. Data download: http://pan.baidu.com/s/1pLBL8b5 Features: * main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s) * temperature and humidity sensor: DHT11 * working voltage: DC 3.7 v-12v (support for 3.7V lithium battery) * measurement range: 20-90% RH 0 to 50 ° * accuracy of measurement: temperature: plus or minus 2 ° humidity + / -

Esp8266 esp-01 esp-01s dht11 temperature humidity wifi node module Welcome to our store. our main products are 3c electronics and peripheral products, such as ic, electronic module, capacitance, led, computer peripherals, etc.............................

Welcome to our shop 👑Kingzizi👑, all the products in this shop are at a favorable price💕, and have quality assurance💕, you can rest assured to buy💕, we will give you the best and highest quality shopping experience! 🌹🌹🌹 ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor Module ESP8266 WIFI NodeMCU Smart Home IOT DIY Kit Data download: http://pan.baidu.com/s/1pLBL8b5 This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection node for smart home or IOT projects. main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s) temperature and humidity sensor: DHT11 working voltage: DC 3.7 v-12v (support for 3.7V lithium battery) measurement range: 20-90% RH 0 to 50 ° accuracy of measurement: temperature: plus or minus 2 ° humidity + / - 5% RH Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP8266 #ESP-01 #ESP-01S #DHT11 #Temperature #Humidity #Sensor #Module #ESP8266 #WIFI #NodeMCU #Smart #Home #IOT #DIY

Welcome to our shop 👑Kingzizi👑, all the products in this shop are at a favorable price💕, and have quality assurance💕, you can rest assured to buy💕, we will give you the best and highest quality shopping experience! 🌹🌹🌹 Type 1: motherboard + USB cable Type 2: Motherboard + USB cable + DHT11 module Type 3: motherboard + USB cable + OLED LCD screen Type 4: Motherboard + USB cable + OLED LCD + DHT11 module Overview: This module takes the ESP8266 module as the core, cooperates with the voltage regulator circuit, USB-TTL circuit and serial port download circuit to realize the SDK development of ESP8266 and realize the Internet of Things function. With the OLED and DHT11 modules, the temperature is reported to the cloud and the messages sent by the cloud are displayed. Feature: Working voltage: 5V (USB powered) Core chip: ESP8266 module (ESP-12F) Expansion interface: 4Pin OLED, DHT11 Realize the function: access the Internet, realize the Internet of Things Symbol Description P1 MiniUSB Power supply + Serial communication P2, P5 module interface OLED, DHT11 P3, P4 pin header interface VCC / GND + IO port P6 module ESP8266 module (ESP-12F) Before purchase: 1.All the goods are ready stock, we will arrange the shipment at once if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.No warranty,if you receive a defect item,please contact us at once with item picture. 4.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) and 10-15 days shipment. 2.If you have not received the item after 15 days shipment,Please contact us. After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP8266 #IoT #Development Board #DHT11 #OLED Display #SDK Programming #Wifi Module Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Loại 1: bo mạch chủ + cáp USB Loại 2: Bo mạch chủ + cáp USB + mô-đun DHT11 Loại 3: bo mạch chủ + cáp USB + màn hình LCD OLED Loại 4: Bo mạch chủ + cáp USB + LCD OLED + mô-đun DHT11 Tổng quan: Mô-đun này lấy mô-đun ESP8266 làm cốt lõi, hợp tác với mạch điều chỉnh điện áp, mạch USB-TTL và mạch tải cổng nối tiếp để hiện thực hóa sự phát triển SDK của ESP8266 và phát hiện mạng internet. Với các mô-đun OLED và DHT11, nhiệt độ được báo cáo lên đám mây và các thông báo do đám mây gửi được hiển thị. Đặc trưng: Điện áp làm việc: 5V (hỗ trợ USB) Chip lõi: Mô-đun ESP8266 (ESP-12F) Giao diện mở rộng: 4Pin OLED, DHT11 Chức năng: truy cập Internet, phát hiện mạng internet Miêu tả ký hiệu P1 MiniUSB Nguồn điện + Giao tiếp nối tiếp Giao diện mô-đun P2, P5 OLED, DHT11 Giao diện tiêu đề chân P3, P4 Cổng VCC / GND + IO Mô-đun P6 Mô-đun ESP8266 (ESP-12F) Trước khi mua: 1. Tất cả các hàng hóa có sẵn, chúng tôi sẽ sắp xếp lô hàng ngay lập tức nếu chúng tôi nhận được đơn đặt hàng. 2. Xin vui lòng đọc miêu tả mặt hàng, nếu bạn có bất kỳ câu hỏi nào, đừng ngần ngại liên hệ với chúng tôi. 3. Không bảo hành, nếu bạn nhận được một mặt hàng lỗi, xin vui lòng liên hệ với chúng tôi cùng một lúc với hình ảnh mặt hàng. Sau khi mua: 1. Nếu bạn hài lòng, xin vui lòng đánh giá chúng tôi 5 sao khen ngợi. 2. Xin vui lòng liên hệ với chúng tôi trước khi bạn để lại phản hồi tiêu cực. Chúng tôi rất sẵn lòng để giải quyết các vấn đề. Nếu bạn nhận được một mặt hàng bị lỗi, vui lòng liên hệ với chúng tôi ngay với hình ảnh hoặc video mặt hàng #ESP8266 #IoT #Development Board #DHT11 #OLED Display #SDK Programming #Wifi Module Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân

ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor Module ESP8266 WIFI NodeMCU Smart Home IOT DIY Kit Data download: http://pan.baidu.com/s/1pLBL8b5 This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection node for smart home or IOT projects. main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s) temperature and humidity sensor: DHT11 working voltage: DC 3.7 v-12v (support for 3.7V lithium battery) measurement range: 20-90% RH 0 to 50 ° accuracy of measurement: temperature: plus or minus 2 ° humidity + / - 5% RH Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP8266 #ESP-01 #ESP-01S #DHT11 #Temperature #Humidity #Sensor #Module #ESP8266 #WIFI #NodeMCU #Smart #Home #IOT #DIY

2 pcs DHT11 Sensor ule & 1 set ESP-01S ESP8266 Serial Wireless ule + Adapter DHT11 digital temperature and humidity sensor is a digital signal output with a calibrated temperature and humidity combined sensor. It uses a dedicated digital ules and acquisition of temperature and humidity sensor technology to ensure that products with high reliability and excellent long term stability. Sensor consists of a resistive elements and a sense of wet NTC temperature measurement devices, and with a high-performance 8-bit minicontroller connected. Therefore, the product has excellent quality, fast response, anti-interference ability, high cost and other advantages. Each DHT11 sensors are extremely accurate calibration of humidity calibration chamber. Calibration coefficients stored in the OTP program memory, internal sensor, signal processing in the detection process to call these calibration coefficients. Single-wire serial interface, allowing the system to become simpler and quicker integration. Ultra-small size, low power consumption, signal transmission distance up to 20 meters, making it a wide range of applications and even the most demanding applications is the best choice. Product is 4-pin single-row pin package. Easy connection, special packages can be provided according to user needs. color: picture color DHT11 Sensor: Power supply: 3-5.5V DC Output signal: digital signal via single-bus Operating range: humidity 20-90%RH, temperature 0-50 Accuracy: humidity +-4%RH(Max +-5%RH) , temperature +-1Celsiu Resolution: humidity 1%RH, temperature 1Celsius Repeatability: humidity +-1%RH, temperature +-1Celsius Response time: Average:10s ( Max15s) Humidity hysteresis: +-1%RH Stability: +-1%RH/Year Interchangeability: fully interchangeable Dimensions: 12 x 15.5 x 5.5mm Material: plastic ule: Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit) Working frequency: 2400 - 2484 MHz Working voltage: 4.5V - 5.5V (On-board 3.3v LDO Regulator) Working current: 240mA(MAX) Serial port baud rate: 115200 (default), can be ified to other values ?by AT command Serial communication format: 8N1 Antenna Type: Built-in PCB antenna Wireless Network e: station / softAP / SoftAP + station Wireless criteria: 802.11 b / g / n WIFI @ 2.4 GHz, support for WPA / WPA2 security e It is very easy to design projects by AT command Material: PC + metal Package Contents: 2 x DHT11 Sensor 1 x ESP-01S ule 1 x ESP-01 Adapter ule Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor Module esp8266 Wifi NodeMCU Smart Home IOT DIY Kit Product features: 1.Have good brush the latest firmware , on the computer can be used 2.ESP8266 all IO mouth lead, direct download without having to reset 3. All open source hardware and sof

Sorry for the inconvenience, i am sorry for you donot receive goods. i have shiped goods , but recently all world now has epidemic , most company move slowly , can you wait a week , if you still not receive , i can resend or full refund . if you donot want wait , i can refund now . sorry

ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor Module ESP8266 WIFI NodeMCU Smart Home IOT DIY Kit Data download: http://pan.baidu.com/s/1pLBL8b5 This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection node for smart home or IOT projects. main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s) temperature and humidity sensor: DHT11 working voltage: DC 3.7 v-12v (support for 3.7V lithium battery) measurement range: 20-90% RH 0 to 50 ° accuracy of measurement: temperature: plus or minus 2 ° humidity + / - 5% RH Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP8266 #ESP-01 #ESP-01S #DHT11 #Temperature #Humidity #Sensor #Module #ESP8266 #WIFI #NodeMCU #Smart #Home #IOT #DIY

📌Thông số kỹ thuật : Nhiệt độ và độ ẩm cảm biến: DHT11 Điện áp hoạt động: DC 3.7v-12v Phạm vi đo: 20-90% RH 0-50°C Độ chính xác: Nhiệt Độ: ± 2 °Độ ẩm ± 5% RH …………………………………………………………………………………………………………. Shop Linh kiện Siêu Phàm cam kết chất lượng sản phẩm Liên hệ: 📱/ Zalo / Facebook : 037.444.9300 1️⃣ Cam kết hàng đúng mô tả SP và đúng ảnh chụp 2️⃣ Cam kết đổi hoặc hoàn tiền nếu SP bị lôĩ 3️⃣ Cam kết hoàn tiền nếu sản phẩm không đạt chất lượng và không đúng mô tả sản phẩm. 4️⃣ Cam kết giao hàng thời gian nhanh nhất trong khả năng có thể. 5️⃣ Cam kết tư vấn, hướng dẫn sử dụng sản phẩm tận tình và chu đáo. ✔ Nếu cần thêm thông tin về sản phẩm, liên hệ với shop qua zalo hoặc chat shopee nhé ✔ Mọi phản hồi liên quan đến sản phẩm các bạn vui lòng chat cho mình trước khi đánh giá nhé, mình sẽ hỗ trợ nhanh và tốt nhất cho các bạn trong khả năng có thể. Đừng đánh giá shop * thấp nha. Shop xin chân thành cám ơn ! #ESP8266 #DHT11 #nhiệtđộ #độẩm#DIY #modul #cảmbiến #mạch #ch

Module Nhiệt Độ - Độ Ẩm DHT11 ESP8266-01s (K1I8-2) độ chính xác cao Module cảm biến nhiệt độ và độ ẩm DHT11 esp8266-01s là mdodule cảm biến được sử dụng phổ biến trong việc đo nhiệt độ và độ ẩm bởi độ chính xác cao, giá thành rẻ, dễ sử dụng. Thông số kỹ thuật của mạch cảm biến nhiệt độ - độ ẩm DHT11: Điện áp hoạt động: 3.7 - 12VDC, hỗ trợ pin lithium Dải đo: Nhiệt độ: 0 - 50 độ C Độ ẩm: 20 - 90 % Sai số: Nhiệt Độ: ± 2 ° Độ ẩm ± 5% RH #modulenhietdo #moduledoam #linhkiendientu #linhkien #linhkien024 #linhkienlammach #lammachthucong Hotline: 09786

Module Nhiệt Độ - Độ Ẩm DHT11 ESP8266-01s (K1I8-2) độ chính xác cao Module cảm biến nhiệt độ và độ ẩm DHT11 esp8266-01s là mdodule cảm biến được sử dụng phổ biến trong việc đo nhiệt độ và độ ẩm bởi độ chính xác cao, giá thành rẻ, dễ sử dụng. Thông số kỹ thuật của mạch cảm biến nhiệt độ - độ ẩm DHT11: Điện áp hoạt động: 3.7 - 12VDC, hỗ trợ pin lithium Dải đo: Nhiệt độ: 0 - 50 độ C Độ ẩm: 20 - 90 % Sai số: Nhiệt Độ: ± 2 ° Độ ẩm ± 5% RH #modulenhietdo #moduledoam #linhkiendientu #linhkien #linhkien024 #linhkienlammach #lammachthucong Hotline: 09786

Description Power supply: connect a DC 5V-12V power to the GND and VCC. Wireless antenna module is easy to DIY your smart switch to control any device by your phone anywhere. The master control of this wireless antenna module is ESP-01/ESP-01S. The working voltage of this wireless module is DC 3.7V-12V and measurement range：20－90％RH 0－50℃. The temperature precision is ±2℃ and the humidity precision is ±5%RH. Specification: Type: wireless antenna module. Size: as pictures show. Color: as pictures show. Suitable: Arduino UNO R3 Mega2560. Master control：ESP-01/ESP-01S. Working voltage：DC 3.7V-12V. Measurement range：20－90％RH 0－50℃. Temperature precision：±2℃. Humidity precision：±5%RH. Note: There might be a bit color distortions due to different computers resolutions. There might be slight errors due to different hand measurements. Package included: 1* Wireless antenna mo

ESP8266 ESP-01 ESP-01S DHT11 Temperature Humidity Sensor Module ESP8266 WIFI NodeMCU Smart Home IOT DIY Kit Data download: http://pan.baidu.com/s/1pLBL8b5 This module is mainly controlled by esp8266-01 / esp-01s, and DHT11 is the temperature and humidity sensor. The temperature and humidity of ESP8266 are uploaded to the server. Support 3.7 v-12v DC supply (3.7 v lithium battery). It can be used as a temperature and humidity collection node for smart home or IOT projects. main control: esp-01 / esp-01s (this module does not include esp-01 / esp-01s) temperature and humidity sensor: DHT11 working voltage: DC 3.7 v-12v (support for 3.7V lithium battery) measurement range: 20-90% RH 0 to 50 ° accuracy of measurement: temperature: plus or minus 2 ° humidity + / - 5% RH Before purchase: 1. All the goods are in stock and we will dispatch immediately if we receive the order. 2.Please read the item description, if you have any question, do not hesitate to contact us. 3.Use the vouchers for more saving. Shipment： 1.1-2 days to ship(except for the pro-order item) After purchase: 1.If you are satisfied，please give us 5 stars praise. 2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. if you receive a defect item,please contact us at once with item picture or video #ESP8266 #ESP-01 #ESP-01S #DHT11 #Temperature #Humidity #Sensor #Module #ESP8266 #WIFI #NodeMCU #Smart #Home #IOT #DIY

mạch Arduino Wifi ứng dụng theo dõi nhiệt độ và điều khiển zalo/fb 097.150.7579 Tp. Thủ Đức

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Specification: Brand new Color: as shown in picture ESP8266: CP2102 chip inside, micro USB, 4MB flash, full I / O port and wireless 802.11 supported IOT platform. DHT11 sensor: A digital signal output with a calibrated combined temperature and humidity sensor. The simple communication protocol significantly reduces the programming effort. BMP180: Highly precise, small 3μA pressure sensor with extremely low power. Its excellent performance can achieve the absolute accuracy of the lowest 0.03 hPa. Can be connected directly to a wide variety of microprocessors via the I2C bus. Pressure range: 300 - 1100 hPa. BH1750FVI: Digital light intensity sensor. Direct digital output, yellow and blue OLED display: 0.96 inch SSD1306 128X64 yellow and blue OLED LCD display with I2C IIC SPI series. Feature: Weather station uses ESP8266-12E to get data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the SSD1306 OLED display; The device can toggle to show data from any city in the world. The device uses the sensors DHT11, BMP180, BH1750FVI to collect temperature, humidity, atmospheric pressure and light data. The weather station reads indoor data via a sensor every 5 seconds and uploads it to the Internet every 60 seconds. Fine workmanship and good performance. Easy to use. Long sevice life. Package Included: 1 x ESP8266-12E 1 x DHT11 1 x BMP180 1 x BH1750FVI 1 x OLED Display 1 x USB Cable 2 x Breadboard 20 x Dupont Cables Note: Kits for Windows operating systems only. Please allow a little size errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated sa

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we try to handle your order.so pls donot cancel o

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we try to handle your order.so pls donot cancel o

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we try to handle your order.so pls donot cancel o