Dc 24v arduino

100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity:

100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, the most of Android phones, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: non-isolated buck module (BUCK) synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity:

Decription: Features: 100% brand new and high quality ! Size:Length:36mm,Width:17mm,Height:14mm Max Output Current: 2A Input Voltage:2 V-24 V Max Output Voltage: > 5V-28 V Efficiency:> 93% Electrical Characteristics: MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino Notice: Input voltage should not exceed the maximum input voltage Peak current output current does not exceed 2A When the module output voltage can not be adjusted, always equal to the input voltage when the first 20 laps counterclockwise rotary potentiometer or more, then you can use the module properly regulate the voltage. Surge mode: potentiometer face chest, counterclockwise turn boost! Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Included: 1 x Step Up Power M

Decription: Features: 100% brand new and high quality ! Length:36mm,Width:17mm,Height:14mm Max Output Current: 2A Input Voltage:2 V-24 V Max Output Voltage: > 5V-28 V Efficiency:> 93% Electrical Characteristics: MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino Notice: Input voltage should not exceed the maximum input voltage Peak current output current does not exceed 2A When the module output voltage can not be adjusted, always equal to the input voltage when the first 20 laps counterclockwise rotary potentiometer or more, then you can use the module properly regulate the voltage. Surge mode: potentiometer face chest, counterclockwise turn boost! Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Included: 1 x Step Up Power M

100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity:

Welcome to Mbig. Our product will give you a big profit, here you can buy high quality goods and get best service. Follow our store will get special discount! Enjoy your shopping time!! Decription: Features: 100% brand new and high quality ! Size:Length:36mm,Width:17mm,Height:14mm Max Output Current: 2A Input Voltage:2 V-24 V Max Output Voltage: > 5V-28 V Efficiency:> 93% Electrical Characteristics: MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino Notice: Input voltage should not exceed the maximum input voltage Peak current output current does not exceed 2A When the module output voltage can not be adjusted, always equal to the input voltage when the first 20 laps counterclockwise rotary potentiometer or more, then you can use the module properly regulate the voltage. Surge mode: potentiometer face chest, counterclockwise turn boost! Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Included: 1 x Step Up Power M

Speciation: - maximum output current: 2 a. - the input voltage: 2 v ~ 24 v - maximum output voltage: 28 v. - efficacy: 93% - product size: Approx. 35x15 x 6mm / 1.37x0.59x0.23 '' Method of use: The module of the in + and - after 2~24v, in adjustering the potentiometer can adjust output voltage, output voltage is greater than the input vo

Description: Color: Black Whit Alarm Diameter:22mm/0.86" Alarm Height:10mm/0.39” 2 Mounting Holes distance:30mm/1.18" 2 Wires length:90mm/3.54" Buzzer Type: Piezoelectric Sound Pressure Level 95 dB Rate Voltage: 12V DC Operating Voltage: 3 - 24V Max Current Rating 10mA Frequency 3900±500Hz Drive Method: Drive Circuit Built in Mounting Holes Sound:"Di" Conti

Driver điều khiển động cơ ECODRI1.0 với các đặc trưng sau: - Số kênh điều khiển: 2 kênh điều khiển - Điện áp hoạt động: 12 - 24 VDC - Dòng tải: Trung bình 20A, Tối đa 38A - Tần số PWM điều khiển: Tối đa 20khz - Tích hợp cảm biến dòng, áp cho mỗi kênh điều khiển - Tự động ngắt bảo vệ khi quá tải - Thiết kế Arduino Sheild, cắm trực tiếp lên các dòng Board Arduino #motordriver #driverdieukhien #dieukhiendongco #arduinosheild #dieukhi

100% thương hiệu mới, chất lượng cao Điều khiển tốc độ của động cơ DC bằng bộ điều khiển này. Hiệu suất cao, mô-men xoắn cao, sinh nhiệt thấp. Với bảo vệ phân cực ngược, bảo vệ dòng điện cao. Sự chỉ rõ: Mô hình: CCMHC Điện áp làm việc: DC 12V - DC 40V. Công suất điều khiển: 0,01 - 400W. Dòng điện: Định mức 8A, Tối đa 10A. Dòng tĩnh: 0,02 A (Chế độ chờ). Chu kỳ nhiệm vụ PWM: 10% -100%. Tần số PWM: 13 KHz. Chất liệu: Nhựa, kim loại. Kích thước (L * W * H): 6cm x 5,5cm x 2,8cm / 2,36 "x 2,16" x1.10 "(ước chừng) Đường kính 4 lỗ: 3 mm (xấp xỉ) Đóng gói: 1 x 10A 12V-40V Điều chế xung 13khz PWM DC Công tắc điều chỉnh tốc độ độ

Description: 1. Modules nature: non-isolated Buck. 2. Rectification: Non-synchronous rectification. 3. Input voltage: DC 7- 24V. 4. Output voltage: DC 5V. 5. Output current: 3A (max). 6. Conversion efficiency: 96% (MAX). 7. Switching frequency: 340KHz. 8. Output ripple: 30mV (max). 9. Load regulation: ± 0.5%. 10.Voltage regulation: ± 2.5%. 11.Operating Temperature: -40 ° C to +85 ° C. 12.With Overcurrent Protection. 13.Size: 60*21*14 mm.   Package Included:    1PC*5V USB M

Do you want to enjoy high-quality experience? Then get into our store and pick it up.! Decription: Features: 100% brand new and high quality ! Length:36mm,Width:17mm,Height:14mm Max Output Current: 2A Input Voltage:2 V-24 V Max Output Voltage: > 5V-28 V Efficiency:> 93% Electrical Characteristics: MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino Notice: Input voltage should not exceed the maximum input voltage Peak current output current does not exceed 2A When the module output voltage can not be adjusted, always equal to the input voltage when the first 20 laps counterclockwise rotary potentiometer or more, then you can use the module properly regulate the voltage. Surge mode: potentiometer face chest, counterclockwise turn boost! Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Included: 1 x Step Up Power M

#DC-DC #Step #Down #Module #6-24V #12V/24V #to #5V #3A #USB #Charger #Module #Fr #Arduino DC-DC Step Down Module 6-24V 12V/24V to 5V 3A USB Charger Module Fr Arduino 100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity:

Connect 2~24V to IN + and IN - Adjust the pontentiometer to putput your desired voltage Output voltage is always higher than the input voltage;Output voltage: 400000 v Please take an extra precaution not to feed the maximun input voltage The peak current output is no more than 2Amp Specification The maximum output current: 2 Amp The input voltage: 2 v ~ 24 v The maximum output voltage: 28 v Efficiency: Less Than 94% Size: approx. 35*15*6mm/1.37*0.59*0.23 inch Net weight: approx. 40g Included in this package 6 x MT3608 2Amp DC-DC Step Up Module Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#DC-DC #Step #Down #Module #6-24V #12V/24V #to #5V #3A #USB #Charger #Module #Fr #Arduino DC-DC Step Down Module 6-24V 12V/24V to 5V 3A USB Charger Module Fr Arduino 100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity:

1. Thông tin sản phẩm Auduino Uno là board mạch rất phổ biến hiện nay. Chỉ cần kết nối Arduino với máy tính hoặc laptop thông qua cổng USB. Arduino Uno R3 được sử dụng phổ biến trong học tập nghiên cứu các dự án IoT. 2. Thông số kỹ thuật Chip điều khiển: Atmega328P – AU. Điện áp vào: 5V ( từ cổng USB) hoặc 7 – 9V (từ nguồn ngoài). Tần số hoạt động: 16 MHz. Dòng ra trên mối chân OUTPUT: 40mA. Điện áp vào lý tưởng : 7 – 12 VDC. Điện áp vào giới hạn : 6 – 20 VDC. Số chân Digital : 14 chân (6 chân PWM). Số chân Analog : 6 chân. Bộ nhớ flash : 32 KB (Atmega328). SRAM: 2KB (Atmega328). EFROM: 1 KB (Atmega

Chiết áp đối diện với ngực, ngược chiều kim đồng hồ để tăng điện áp! Một số khách hàng cho biết điện áp đầu ra của mô-đun không thể điều chỉnh được và luôn bằng điện áp đầu vào. Khi bạn gặp phải sự cố này, vui lòng xoay chiết áp ngược chiều kim đồng hồ trên 10 vòng, sau đó sử dụng mô-đun để điều chỉnh điện áp bình thường. 1. Dòng điện đầu ra: 2A 2. Điện áp đầu vào: 2 v-24 v 3. Điện áp đầu ra:> 5V-28 v 4. Hiệu quả:> 93% Hướng dẫn sử dụng: 1. Điện áp đầu vào không được vượt quá điện áp đầu vào 2. Dòng điện đầu ra hiện tại cao điểm không vượt q

100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantit

Connect 2~24V to IN + and IN - Adjust the pontentiometer to putput your desired voltage Output voltage is always higher than the input voltage;Output voltage: 400000 v Please take an extra precaution not to feed the maximun input voltage The peak current output is no more than 2Amp Specification The maximum output current: 2 Amp The input voltage: 2 v ~ 24 v The maximum output voltage: 28 v Efficiency: Less Than 94% Size: approx. 35*15*6mm/1.37*0.59*0.23 inch Net weight: approx. 40g Included in this package 6 x MT3608 2Amp DC-DC Step Up ule Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

The Input Voltage: 2V ~ 24V. The Maximum Output Current: 2A. Product Size: 36 mm * 17 mm * 14 mm Efficiency: Max 93% The Maximum Output Voltage: 28V. Package included: 10pcs MT3608 DC-DC Step Up Power Apply Module Booster Power Mo

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Features: 100% brand new and high quality ! Size:Length:36mm,Width:17mm,Height:14mm Max Output Current: 2A Input Voltage:2 V-24 V Max Output Voltage: > 5V-28 V Efficiency:> 93% Electrical Characteristics: MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino Notice: Input voltage should not exceed the maximum input voltage Peak current output current does not exceed 2A When the module output voltage can not be adjusted, always equal to the input voltage when the first 20 laps counterclockwise rotary potentiometer or more, then you can use the module properly regulate the voltage. Surge mode: potentiometer face chest, counterclockwise turn boost! Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Include: 1 x Step Up Power M

Connect 2~24V to IN + and IN - Adjust the pontentiometer to putput your desired voltage Output voltage is always higher than the input voltage;Output voltage: 400000 v Please take an extra precaution not to feed the maximun input voltage The peak current output is no more than 2Amp Specification The maximum output current: 2 Amp The input voltage: 2 v ~ 24 v The maximum output voltage: 28 v Efficiency: Less Than 94% Size: approx. 35*15*6mm/1.37*0.59*0.23 inch Net weight: approx. 40g Included in this package 6 x MT3608 2Amp DC-DC Step Up ule Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Connect 2~24V to IN + and IN - Adjust the pontentiometer to putput your desired voltage Output voltage is always higher than the input voltage;Output voltage: 400000 v Please take an extra precaution not to feed the maximun input voltage The peak current output is no more than 2Amp Specification The maximum output current: 2 Amp The input voltage: 2 v ~ 24 v The maximum output voltage: 28 v Efficiency: Less Than 94% Size: approx. 35*15*6mm/1.37*0.59*0.23 inch Net weight: approx. 40g Included in this package 6 x MT3608 2Amp DC-DC Step Up ule Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Origin: CN (Origin) Condition: New Type: Other Model: MT3608 Application: Other Operating temperature:-40- 85 Supply Voltage: 2V-24V Power dissipation: 15W Packing: Other is_customized: Output voltage: 5V-28V Efficiency

Description: 1. Modules nature: non-isolated Buck. 2. Rectification: Non-synchronous rectification. 3. Input voltage: DC 7- 24V. 4. Output voltage: DC 5V. 5. Output current: 3A (max). 6. Conversion efficiency: 96% (MAX). 7. Switching frequency: 340KHz. 8. Output ripple: 30mV (max). 9. Load regulation: ± 0.5%. 10.Voltage regulation: ± 2.5%. 11.Operating Temperature: -40 ° C to +85 ° C. 12.With Overcurrent Protection. 13.Size: 60*21*14 mm.   Package Included:    1PC*5V USB M

Connect 2~24V to IN + and IN - Adjust the pontentiometer to putput your desired voltage Output voltage is always higher than the input voltage;Output voltage: 400000 v Please take an extra precaution not to feed the maximun input voltage The peak current output is no more than 2Amp Specification The maximum output current: 2 Amp The input voltage: 2 v ~ 24 v The maximum output voltage: 28 v Efficiency: Less Than 94% Size: approx. 35*15*6mm/1.37*0.59*0.23 inch Net weight: approx. 40g Included in this package 6 x MT3608 2Amp DC-DC Step Up ule Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Connect 2~24V to IN + and IN - Adjust the pontentiometer to putput your desired voltage Output voltage is always higher than the input voltage;Output voltage: 400000 v Please take an extra precaution not to feed the maximun input voltage The peak current output is no more than 2Amp Specification The maximum output current: 2 Amp The input voltage: 2 v ~ 24 v The maximum output voltage: 28 v Efficiency: Less Than 94% Size: approx. 35*15*6mm/1.37*0.59*0.23 inch Net weight: approx. 40g Included in this package 6 x MT3608 2Amp DC-DC Step Up ule Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#DC-DC #Step #Down #Module #6-24V #12V/24V #to #5V #3A #USB #Charger #Module #Fr #Arduino DC-DC Step Down Module 6-24V 12V/24V to 5V 3A USB Charger Module Fr Arduino 100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity:

#DC-DC #Step #Down #Module #6-24V #12V/24V #to #5V #3A #USB #Charger #Module #Fr #Arduino DC-DC Step Down Module 6-24V 12V/24V to 5V 3A USB Charger Module Fr Arduino 100% brand new and high quality Features New main chip made in USA. The max output current 3A, long time use 2.1A, enough use. New design, 3 solid state ceramic capacitors (MLCC). Synchronous rectification, High efficiency, 6.5V to 5V 0.7A can up to 97.5%, 12V to 5V 1A can up to 94%. Flat copper inductor, improve conversion efficiency With output overvoltage protection. There is 1.5A fuse, output 5V have 300W TVS tube protect your USB device. Using the latest USB identification circuit, perfectly compatible with IPHONE, IPAD etc. High quality USB port. Output voltage indicator (RED). Input with reverse polarity protection diode, will not damage when input connect incorrect. Ultra-low static current, 0.85 mA only. Do not need to add swith when connected to the car battery, can be connected to car cigarette lighter cable or ACC power supply cable. Module Parameters Module Properties: synchronous rectification Input voltage: DC 6-24V Output voltage: 5.1-5.2V Output current: 3A MAX Conversion efficiency: can up to 97.5% (6.5V step down to 5V 0.7A) (after short reverse protection and fuses test value) Switch frequency: 500KHz Output ripple: 10mV around (12V to 5V3A) 20M bandwidth Output indicator: Output voltage indicator is red Operating temperature: Industrial grade (-40 Celsuis to + 85 Celsuis) (the higher the ambient temperature, the lower the output power) Output overvoltage protection: Yes, input 1.5A fuse, output 5V have 300W TVS tube clamp protection. Full load temperature: 30 Celsuis Static current: 0.85 mA Load regulation: ± 1% Voltage Regulation: ± 0.5% Dynamic response speed: 5% 200uS Output short circuit protection: Yes, but please do not short circuit for a long time Input reverse polarity protection: Yes, there is reverse polarity protection diode Connection mode: Welding Quantity: