Counterbore

Features: *Counterbore mould end mill cutter, usually used to be assembled on milling machine *There are 7 kinds of milling cutters for you to choose: M3.2; M4.2; M5.2; M6.2; M8.2; M10.3; M12.4 *Suitable for carved, high-speed machines *Can milling of copper, aluminum, tool steel, cast iron, etc. *High toughness, abrasion resistance, high-speed cutting for the high hardness *Can processing directly or fine processing to the heat treatment mold *Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time *Suitable for: Machining of low carbon steel and non-ferrous materials Specifications: *Material: HSS-AL *Color: As Pictures Show *Milling Cutter Type: M3.2; M4.2; M5.2; M6.2; M8.2; M10.3; M12.4 *Highest Cutting Hardness: HRC65~68 *Milling Cutter Dimension: M3.2: 3.2*5.9mm M4.2: 4.2*7.4mm M5.2: 5.2*8.9mm M6.2: 6.2*10.4mm M8.2: 8.2*13.4mm M10.3: 10.3*16.8mm M12.4: 12.4*18.8mm *Weight: 30g(M3.2), 35g (M4.2), 40g (M5.2), 45g (M6.2), 50g (M8.2), 65g (M10.3), 80g (M12.4) (Approx.) Package Contents: 1*Milling Cutter Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. #MillingCutter  #HSS-AL  #Tool  #Slotting  #M3.2~M12.4  #Carved  #Counterbore  #Mould  #EndMillCutter  #SlotBit  #Supplies  #Spare  #Parts  #Attachment  #Replace  #Durable  #Useful  #New &

Counterbore SetKKmoon 7pcs/set Counterbore Set M3-M12 High Quality High-speed Steel 4 Flutes Straight Shank Counterbore End Mills A set of counterbore end mill that is very good quality and works well. Features: High speed steel, high quality and durable. The counterbore set works great in counter bored hole. It includes 7 sizes in one counterbore set(M3, M4, M5, M6, M8, M10, M12). An essential hardware tool for industrial. Apply to cast iron, steel, copper, aluminum, conventional hardness of stainless steel and die steel, etc. Specifications: Material: High-speed steel Drill Quantity: 7pcs Drill Size: M3, M4, M5, M6, M8, M10, M12 Package Weight: Approx. 303g / 10.69oz Package Size: Approx. 10 * 7 * 4cm / 3.94 * 2.75 * 1.57in Package List: 7 * Counterbore End

Mill Cutter, usually used to be assembled on milling machine. Suitable for carved, high-speed machines. Can milling of copper, aluminum, tool steel, cast iron, etc. High toughness, abrasion resistance, high-speed cutting for the high hardness. Can processing directly or fine processing to the heat treatment mold. Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time. M3: 5.9 (blade diameter) * 3.2 (boot) * 6 (shank diameter) * 45 (full length) M4: 7.4 (blade diameter) * 4.2 (boot) * 6 (shank diameter) * 48 (full length) M5: 9.5 (blade diameter) * 5.2 (boot) * 6 (shank diameter) * 51 (full length) M6: 11.0 (blade diameter) * 6.2 (boot) * 8 (shank diameter) * 58 (full length) M8: 14.0 (blade diameter) * 8.2 (boot) * 12 (handle diameter) * 67 (full length) Suitable For: Machining of low carbon steel and non ferrous materials Color: silver Material: high speed steel Package Included: 5 x End Mill CutterOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Countersink & Counterbore Wood Drill Bit Kit pre-drills holes and countersinks even hardwood and aluminum, thereby reducing the risk of splitting the panel, and giving every screw or bolt a nice appearance as it appears flush with the furniture's surface, and can be covered nicely with wooden plugs. SPECS: 7 Countersink 4-Fluted Bits with 7 Hex adjustable Depth Stop Collars, Compatible with Screw Sizes: #5, 6, 7, 8, 9, 10, 12. - Bit sizes: 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, & 7/32 inch - Hex Wrench: 3/32 inch diameter. DESIGN & QUALITY: No More Splitting Woods! The Ultimate 2-in-1 countersink drill bit design Made of Steel so the bits have sharp tips and are able to sustain through heat and pressure without breaking/shattering and damaging the panel or beam you are building - Bit sizes are carved onto the drill bits for identification. NICE APPEARANCE: The drill bits drills pilot holes nicely and accurately with precision time and time again getting a precise cone shaped hole on each burr, as a result you will get a nice smooth surface on any type of hard, soft wood or aluminum. USES: Attach to any Power Bench or Hand drill driver - When Woodworking or Building Molding, enlarge and bevel the rim of a drilled hole so that a screw, , or bolt can be inserted flush with the surface you are working on, Example: Hinges - the bits also wipe away any burr left from any application, thereby improving the finish and removing hazardous edges. But why pre-drill with 1 bit & countersink with another 1 when you can have it in 1 easy tool?! OUR SOLUTION: The 3-in-1 Counter-sinking Drill Bits lets you Pre-drill & cone-shape the hole where the screw heads will countersunk & sit comfortably below the surface of the surroundings. Kit also includes stop collars for controlling drill bit depth to a precise setting. It's recommended to use drill collars with a lubricant to prevent burning of the material surface. ADJUSTABLE: Both the Countersink bits & the collars have hex nuts for easy adjusting tightening & accurate positioning. Kit comes with the Correct Hex Wrench for tightening the nuts. Countersink may also be used to remove burr left from a drilling/tapping operation thereby improving the finish of the project & removing any hazardous sharp edges. (Countersink unlike counterbore makes a cone shaped hole while bore produces a Flat-bottom rounded hole.) Bit lengths: #5 3-1/32 #6 3-5/32 #7 3-2/8 #8 3-11/32 #9 3-5/16 #10 3-9/16 #12 3-9/16 Color: silver material: steel Easy identification: Bit Sizes are carved on the bits for clear identification which bit for the correct screw. Package: 7* wood screws to take out the countersink With spanner Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Mill Cutter, usually used to be assembled on milling machine. Suitable for carved, high-speed machines. Can milling of copper, aluminum, tool steel, cast iron, etc. High toughness, abrasion resistance, high-speed cutting for the high hardness. Can processing directly or fine processing to the heat treatment mold. Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time. M3: 5.9 (blade diameter) * 3.2 (boot) * 6 (shank diameter) * 45 (full length) M4: 7.4 (blade diameter) * 4.2 (boot) * 6 (shank diameter) * 48 (full length) M5: 9.5 (blade diameter) * 5.2 (boot) * 6 (shank diameter) * 51 (full length) M6: 11.0 (blade diameter) * 6.2 (boot) * 8 (shank diameter) * 58 (full length) M8: 14.0 (blade diameter) * 8.2 (boot) * 12 (handle diameter) * 67 (full length) Suitable For: Machining of low carbon steel and non ferrous materials Color: sier Material: high speed steel Package Included: 5 x End Mill CutterOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Welcome to our store^_^ Products shipped from China 2-3 day to shipped out, and about 7-15 days to arrive Happy Shopping❤ 11pcs High Speed Steel Hex Shank Taper Drill Counter Sink Holes Drilled Carpenter Countersink Bit Reaming Drill Feature: The drill bit is made of high speed steel HSS 4241 and the chamferer is made of 45# steel. The chamferer is equipped with adjusting screw, which can control the drilling depth. At the same time, it also takes into account the chamfering effect, which is convenient and efficient. Specification: Application: suitable for woodworking Material: the drill bit is made of high speed steel and the chamferer is made of high carbon steel Handle type: 1 / 4 hexagonal handle (6.3mm) Type: 7/64, 9/64, 11/64, 3/16, 7/32 Package size: 100*50*20mm/3.93*1.96*0.78'' Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-2cm measuring deviation due to manual measurement. Included: 5 X Countersink Bits 5 X Screws 1 X Wrench #holecutter #rcountersinkdri