Card pci to sata

---------------------Yyci.vn------------ Decription: Feature:     Serial ATA (SATA) – 1.5 Gbps (150MB/s) Compliant with SATA 1.0 specification Integrated SATA Transport, Link logic, and PHY layer 48-bit sector addressing Four independent DMA channels with 256B FIFO per channel Virtual DMA in PCI with serial link in legacy PIO mode Supports command buffering for ATA TF shadow registers Supports ATAPI devices: CD-ROM, DVD-ROM, etc. Hot-Plug capable Supports 32-bit wide PCI bus at 66MHz Selectable drive strength on Tx for backplane applications Supports spread spectrum clocking to reduce EMI Single, digital PLL architecture with 1 PLL for all 4 channels Drivers supports Just a Bunch of Disks(JBOD) ROM BIOS supports RAID setup and Boot Features Support Linux, Windows 98SE, ME, NT4.0, 2000,Server 2003,Server 2008, XP , XP 64-bit ,Vista 64bit ,Vista , win 7 and Win 7 64bit . 4 Internal SATA ports supporting/connect up to 4 SATA devices RAID Function: Supports RAID 0 (Striping), RAID 1 (Mirroring), RAID 0+1, RAID 5 and RAID 10 Adjustable stripe size for RAID 0 Support co-exist RAID set and Non-RAID HDD Allow HDDs with different sizes to be configurated in a RAID set SATARaid Management Utility supports SATARAID drivers used to host RAID levels 0, 1, 0+1, 5 and 10. Use this utility with the SATARAID BIOS and drivers to create, monitor, manage, and access RAID volumes. Support Windows System Included: 1 x PCI 4ports SATA Raid Card 2 x SATA cable 1 x Drive

Features: Fully compliant with ZIF specification. 3.3V Mini PCI-e SSD (mSATA module) support. Connect Mini PCI-e mSATA SSD as 1.8inch ZIF SSD, update SSD of your iPod, iPad or laptop easily. No extra power adapter and drivers needed. Support DOS, Win98/SE, 2000, Server 2003, XP, Vista, 7, Sever 2008, Mac OS, Linux. Specification: Size: approx. 60 X 35 X 7 mm/2.36 X 1.38 X 0.28 in Included: 1X Mini mSATA PCI-E SSD To 40pin ZIF

Package Included: 1x USB cable. 1x 1X to 16X extension cable. 1x PCIE riser board. 1x PCIE adapter. Specifications: Cable length: 60cm. Interface: PCI-E, USB 3.0, 6pin, 4pin. USB cable color: Red, white, blue. Board size: 13x4.4cm. Description: Features： This PCI-E GPU extender features gold-plated contacts and has good performance, it can be used for a long time. There are 4 capacitors on this PCI-E 1X to 16X board to make the power supply stable and secure. The PCI-E GPU adapter features a stable resistance and has 3 LED light to display the working states. The GPU extender riser card has a 6pin interface, you can easily connect and the 6pin interface also can reduce the burden of the motherboard. The PCI-E riser board features a fixed buckle, which can fix the graphic card, so the card won't easily

Features: Support NVME protocol and SATA protocol, compatible with M-key, B-key and B&M key M.2 SSD. Support PCI-E X4/X8/X16 slot motherboard. Compatible with 22x30/22x42/22x60/22x80/22x110 SSD. Golden finger design, scratch-proof and wear-resistant, good electrical conductivity, strong oxidation resistance ability. Multi-layer PCB board, good conduction performance. Specification: Type: PCI-E X4 to M.2 adapter card Transmission speed: 32Gbps(NVME, max), 6Gbps(NGFF, max) Supported hard disk interface: M-key/B-key/B&M key Supported slot: PCI-E X4(compatible with X8/X16) Supported SSD size: 22x30/22x42/22x60/22x80/22x110 Supported system: Windows, Mac, Linux Circuit board size: 14.5 * 6.8cm /5.71 * 2.68in Packing list: 1 * Adapter cable 1 * SATA

[Good Compatibility]: Compatible slot: PCIe x4, PCIe x8, PCIe x16, Compatible with Windows 7/8/10. [PCI-E to USB 3.1]: Add an USB 3.1 Gen 2 2-ports type-C (10 Gbps) ports to your new PC or older PCIe-equipped desktop computer to Expand your computer. [USB 3.1 Gen 2]: The PCI-E card has a bandwidth of 10Gbps, which can ensure fast data transmission and the real USB3.1 speed of each port. [Support hot swap]: When connecting/disconnecting the device, there is no need to shut down the system, which is convenient for multiple USB replacement. Easy to install and faster to expand. [15PIN power supply port Powerful]: Equipped with SATA 15PIN power supply backup interface, plug in the computer's power cord to provide you with a strong power supply capacity, suitable for most chassis power supplies, you no longer need to worry about power supply matching problems, the power supply is sufficient and stable. Colour:Black Material:PC + metal Package Contents: 1 x PCI-E 4x Express to USB 3.1 Type C Dual Port Expansion Card 1 x Low profile bracket 1 x CD driverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

#PCIE-16X #Main #Card #USB3.0 #Cable #1 #PCI-E #1X #to #16X #Card #SATA #4Pin #6Pin #15Pin PCIE-16X Main Card USB3.0 Cable 1 PCI-E 1X to 16X Card SATA 4Pin 6Pin 15Pin Features: 100% brand new and high quality New design, 1X, 2X, 4X, 8X, 16X compatible (1-16X and 16-16X can be used), the circuit board PCIe adapter is newly released, safer, more efficient, and more practical. Gold plated PCI-E 1X slot for better connectivity and long life. No driver needed.With side clip to fasten other card. Dedicated for Bitcoin mining 15Pin interface to strengthen the power supply, reduce the burden on the motherboard. Soft usb3.0 cable is convenient to use that you can put it anywhere as you want. Specification: Product Name: Pci-e 1x To 16x Product Interface: Pci-e 1x Pci-e 16x Usb3.0 Riser Card Color: White Main Board Size: 122x44mm (approx.)/ 4.8x1.7in Pci 1 x Card Size:approx 3.1x 3.2cm/1.1x1.2in Package Includes: 1x PCIE-16X Main Card 1x USB3.0 Cable 1x PCI-E 1X Card note: Due to the problems of lighting effects and shooting angles, there will be certain tolerances in the product, please understand. Please allow 0-1cm error due to the manual measurment. This extension cable is suitable for motherboard PCI-E slot (1X 2X 4X 8X 16X). Please plug in the floppy drive power cord when using it. When plugging or unplugging the PCI-E extension cable, the computer must be disconnected and then plugged in. Be sure to read the precautions when us

#PCI-E #4X #to #4-Port #2x #SATA #3.0 #Expansion #Card #Computer #Desktop #Solid #State #Mechanical #Hard PCI-E 4X to 4-Port 2x SATA 3.0 Expansion Card Computer Desktop Solid State Mechanical Hard Drive Card Supports Features: 100% brand new and high quality Comply with Serial ATA 3.0 specification and PCIe 2.0 specification. Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps communication speed. Supports programmable signal levels from the transmitter. Supports Gen 1i Gen 2i Gen 2m Gen 2x and Gen 3i. Applicable slots: PCI-E (1×, 4×, 8×, 16×). Supports two SATA ports. Compatible with AHCI 1.0 and IDE programming interface. Support Native Command Queuing (NCQ). Support switching based on FIS port multiplier or switching based on command. Support sleep and partial power management states. Support hot swap and hot swap. Compatible with SATA 6G, 3G and 1.5G hard drives. Both large case and small case can be used. Supported systems: PCI Express-enabled systems with available PCI Express slotsWindows 8/7 (32 / 64bit) / Vista (32 / 64bit) / XP / Server 2003/2008 Specification: Product Name: Expansion Card material:metal Colour: Black Size: approx. 11x10x2cm/4.33x3.94x0.79in Interface rate: 6Gbps Bus interface: pci-express x1 Connector: 2 x SATA Package Includes: 1PC x PCIe to SATA Card note: Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank

This is a NVME to NGFF M-KEY Adapter Card. It ocnverts U.2 to M.2 PCI-E.  Features: Convert SSD with M-KEY NGFF to SFF-8639 interface. ONLY support M-KEY. NOT support B-KEY or B/M-KEY. It has PCI-E 4X interface and SATA power supply interface. Specification: Item size: 9.7 * 5.3 * 1.8cm / 3.82 * 2.09 * 0.71in(L * W * H) Item weight: Approx.17g / 0.6oz Package size: 9.7 * 5.3 * 1.8cm / 3.82 * 2.09 * 0.71in(L * W * H) Package weight: 17g / 0.6oz Package List: 1 * NVME to NGFF M-KEY Adapter

#10Pcs #Dual #15Pin #SATA #To #PCI-E #8Pin #(6Pin #+ #2Pin) #ideo #Card #Power #Adapter #Cable 10Pcs Dual 15Pin SATA To PCI-E 8Pin (6Pin + 2Pin) ideo Card Power Adapter Cable Description: Features: 100% brand new and high quality. This is a dual 15Pin SATA male to PCIe 8Pin(6+2) male video card power cable. The current computer power supply in order to save costs, not for 8PIN graphics card power supply, or mining design or mining with a multi-graphics card when the power supply is not enough, with a single line of current is not enough. Now with this conversion line can solve the problem, directly to double SATA 15PIN power to graphics card 8PIN power port, added graphics card current. Because high-end graphics cards are used 8PIN power supply, the current is relatively large, with a single SATA port current is not enough, easy to burn line. So you must use two SATA port to provide 12V power supply to 8PIN graphics card. Application: 1. SATA power head PC host power supply SATA, 8Pin access card 8PIN. 2. Applicable to the computer has excess power SATA power head, no 8PIN graphics card power supply use. Specifications: Item Name: Adapter Cable Material: PVC + ABS + Metal Color: Black + Yellow Cable length: 19cm/7.48in (Approx.) Connector A: 2* 15Pin SATA male Connector B: 1* PCI-E 8Pin (6Pin + 2Pin) female Wire: 18AWG Quantity: 1 Set(10pcs) Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: (No retail package) 10 X Dual 15Pin SATA To PCI-E 8Pin (6Pin + 2Pin)

PCI-E X4 X8 X16 PCI Express to SATA3.0 2 Ports SATA 6G HDD Expansion Controller Adapter for Computer Riser Cards Feature: Support IDE/AHCI programming interface. Compatible with serial SATA version 3.0; PCI-E 2.0 compliant. Full speed transmission with 6Gbps bandwidth. Plug and play, support hot plug. Both large and small chassis can be used. Specification: Chip: ASM1061 Interface: 2 * SATA Applicable slot: PCI-E (compatible with X4 X8 x16) Supported systems: for windows (R) XP / Server2003 /Vista / 7 / 8 / 10 (32 / 64bit) / MAC / Linux Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 x Expansion Card 2 x Bracket (8cm and 12

SATA PCIe Adapter 4 Ports SATA III to PCI Express 3.0 X1 Controller Expansion Card Feature: Good reliability, availability, and high compatibility. Able to achieve fast data transmission, up to 6Gbps transmission mechanism, save more time! 4 standard SATA III ports, which can be connected to multiple devices at the same time. Can be used as a system disk, supports large-capacity hard disks, and can be connected to SSDs! Specification: Transmission rate: 6Gbps Bus type: PCI-E X1, compatible with PCI-E X4/X8/X16 and other interfaces Bus speed: PCI-E 3.0 Interface: SATA III Number of SATA interfaces: 4 Installation conditions: there must be one or more free PCI-E slots on the motherboard Working temperature: -10~+60 °C Storage temperature: -20~+40 °C Application: desktops, workstations, servers, industrial equipment Main chip: ASM1064 Driver support: for Windows, for Mac, for NAS, for LINUX, etc. Product size: 120*65*56mm Product weight: 70g Packing size: 120*65*56mm Package weight: 70g Note: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor. Included: 1 X Expansion

Features: Equipped with M-key B-key interfaces, support NVME protocol and SATA protocol M.2 SSD. Compatible with 2230/2242/2260/2280 SSD. Golden finger design, scratch-proof and wear-resistant, good electrical conductivity, strong oxidation resistance ability. Double-sided copper strip porous heat dissipation structure, fast heat dissipation, stable operation. Multi-size SSD fixed hole, solid connection.  Specification: Type: M.2 NVME adapter card Built-in interface: M-key + B-key Supported slot: PCI-E X4(compatible with X8/X16) Supported SSD size: 2230/2242/2260/2280 Circuit board size: 12.5 * 7.8cm /4.92 * 3.07in Packing list: 1 * Adapter card 1 * SATA cable 1 * Baffle 1 * Bag of screws 1 * Screwdriver 2 * Heat dissipation sil

#15-Pin #SATA #Male #to #6 #Pin #Female #PCI-Express #Female #Video #Card #Power 15-Pin SATA Male to 6 Pin Female PCI-Express Female Video Card Power Features: 15-Pin SATA (male) connectors to 6-Pin PCI Express (female) connector. Position devices as needed within your computer case, with an extended power connection/ The cable adapter is handy for your toolbox when building, upgrading or repairing computers etc. Use this handy cable to provide PCIe power from one of your open SATA connections if needed. Two of the pins can be detached to convert it into a 4 pin connector. Specification: Type:15Pin SATA (male) to 6Pin PCI Express (female) Connector Size:Pls see the Pictures Weight:20g Color: Black+Yellow Package Includes: 1 Piece 15Pin to 6 Pin Adapter Cable note: Due to the differences of camera equipment, light intensity and display screens, the color of the item may be slightly different from that shown in the pictu

#SATA #Male #15Pin #to #PCI-E #6pin(4+2) #Female #Video #Card #Power #Supply #Adapter #Cable SATA Male 15Pin to PCI-E 6pin(4+2) Female Video Card Power Supply Adapter Cable Features: 15-Pin SATA (male) connectors to 6-Pin PCI Express (female) connector. Position devices as needed within your computer case, with an extended power connection/ The cable adapter is handy for your toolbox when building, upgrading or repairing computers etc. Use this handy cable to provide PCIe power from one of your open SATA connections if needed. Two of the pins can be detached to convert it into a 4 pin connector. Specification: Type:15Pin SATA (male) to 6Pin PCI Express (female) Connector Size:Approx 20cm/7.87in Weight:13g Color: Black+Yellow Package Includes: 1 Piece 15Pin to 6 Pin Adapter Cable note: Due to the differences of camera equipment, light intensity and display screens, the color of the item may be slightly different from that shown in the pictu

Features: This is PCI-E to SATA3.0 adapter card. Equipped with 2 SATA3.0 interfaces, the transmission rate up to 6Gbps. Adopt ASM1061 main control chip, high-speed and stable transmission. Gold finger design, scratch-proof and wear-resistant, good electrical conductivity, strong oxidation resistance ability. Multiple systems compatible, support plug and play. Specification: Type: PCI-E to SATA3.0 adapter card Color: Black Main control chip: ASM1061 Bus interface: PCI-E X1(compatible with PCI-E X4/X8/X16) Output interface: 2*SATA3.0 Theoretical transmission rate: 6Gbps Supported system: Vista/Win7/Win8/Win10(32/64bit)/Linux Packing list: 1 * Adapter card 1 * B

#4 #Port #SATA #III #6GB/S #PCI-E #X4 #To #SATAController #SSD #Card #w/ #Low #Profile #Bracket 4 Port SATA III 6GB/S PCI-E X4 To SATAController SSD Card w/ Low Profile Bracket Features: 100% brand new and high quality Comply with Serial ATA 3.0 specification and PCIe 2.0 specification. Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps communication speed. Supports programmable signal levels from the transmitter. Supports Gen 1i Gen 2i Gen 2m Gen 2x and Gen 3i. Applicable slots: PCI-E (1×, 4×, 8×, 16×). Supports two SATA ports. Compatible with AHCI 1.0 and IDE programming interface. Support Native Command Queuing (NCQ). Support switching based on FIS port multiplier or switching based on command. Support sleep and partial power management states. Support hot swap and hot swap. Compatible with SATA 6G, 3G and 1.5G hard drives. Both large case and small case can be used. Supported systems: PCI Express-enabled systems with available PCI Express slotsWindows 8/7 (32 / 64bit) / Vista (32 / 64bit) / XP / Server 2003/2008 Specification: Product Name: Expansion Card material:metal Colour: Black Size: approx. 11x10x2cm/4.33x3.94x0.79in Interface rate: 6Gbps Bus interface: pci-express x1 Connector: 2 x SATA Package Includes: 1PC x PCIe to SATA Card note: Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank

STABLE and SAFE: 3 Solid s deliver power to image stably and safely. STABLE CABLE: USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters. REDUCE MOTHERBOARD BURDEN: 4PIN, SATA and Graphic card 6PIN interface are optional to power,which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards. WIDELY APPLICABLE: Suitable for all Window systems, LINUX and MAC. No drivers needed. 4 Holes on the riser card to fasten. LED indicator and fuse are used on the board. Colour: black + red Material: ABS Size: 13 x 3 x 1.2cm, Cord length 60cm Package Contents: 1 x PCI-E 16X adapter board (because each batch of raw materials may be different, the appearance of the PCI-E adapter card may be different) 1 x PCI-E 1X adapter card 1 x USB cable (random color, don't accept the specified color) Note: 1.Solid 2. The PCI Express x16 slot 3. The Chipset el may be different 4. The Silk print may be different Please Agree with this Statement before Purchasing.Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

PCI-E slot: PCI Express X1 slot Performance: for Motherboard Mini PCI-E Interface, Plug and Play No driver is required. USB 3.0 interface extender, super high quality and super high speed. Mini PCI-E to PCI-E X1 conversion card Product type: Mini PCI-E to PCI-E 1X Product Name: Expander PCI-E X1 Riser Card Gold plated contacts for better connectivity and long life . With power supply ule, 99% devices no need external power can direct use. size:USB cable length 30cm Material:PCB+metal colour:Blue+ Black Package Contents: 1 x USB 3.0 PCI-E 1X Slot Extender 1 x Mini PCI-E Riser Card 1 x USB3.0 Cable (The colors are random and cannot be specified)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

ORICO Add On Cards M.2 NVME SATA to PCI-E 3.0 X4 Riser Card Dual Interface M.2 SSD PCIE Adapter Converter PCIe 3.0 Gen3 X4 Computer Expansion Cards Feature: Support 4TB large capacity, built-in M-Key/B-key dual interface; Multi-specification length, SSD compatibility. Specification: Product brand: ORICO Model: PDM2 Built-in interface: M-key/B-Key Supported slots: PCI-e 3.0 GEN3 X4 Hard disk support: 2230/2242/2260/2280 multi-size, PCI-E channel NVME&SATA protocol M.2 SSD Theoretical transmission rate: 32Gbps(NVME protocol), 6Gbps(SATA protocol) Support capacity single disk: 2TB, total 4TB Supporting systems: for iOS, Windows7/8/10, Linux Product dimensions: 120*105*25mm Packing size: 190*155*28mm Net weight: 105g Gross weight: 140g Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Included: 1 X Expansion Card #m2pcieadapter #satatopcie #nvme #m2 #expansion #dual #orico #30x4 #riser

It can control four independent Serial ATA channels, each channel has its own Serial ATA bus and supports one Serial ATA device. Provides four independent channels and supports up to four serial ATA drives HDD operates normally when not in a RAID set Supports SATA up to 150MB / s application:Operating system: Windows 98SE / ME / NT4.0 / 2000 / XP / Vista / Win 7 32 / 64-bit Pentium-class computer with an available PCI slot Colour:black Material:ABS Package Contents: 1x PCI to Sata CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

100% brand new and high quality Connects mSATA SSD to NGFF B+M Key motherboard. Compliant with PCI Express M.2 specification 1.0. Compliant with SATA III specification. Supports data transfer up to 6.0Gb/s. Supports 27mm half-height & 50mm full-height mSATA SSD. Supports socket 2 (B Key) & socket 3 (M Key). One mSATA Mini PCI-E socket and one NGFF M.2 B+M Key male connector available. 3 screw holes 2242/2260/2280 available to fix PCB board 4 screw holes available to fix mSATA SSD. Easy installation & no driver required. No additional power required. Supports boot function. Supports any OS, like Windows, WinCE & Linux etc. Board Size:(L*W)9.90*6.60cm/3.89 inch*2.60 inch Quantity:1Pc Color: green Material: PC Package Contents:1 * Adapter CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Approximate Cable Length: around 20cm from end to end ●Connector A: 15-Pin SATA Male ●Connector B: 6-Pin PCI-Express Card Power Adapter Package: 1XSATA 15-Pin Male to 6-Pin PCI-Express Card Power Adapter Cable

Features: Suitable for standard M.2 B-Key SATA-Bus SSD to SATA3. Supports 2230/2242/2260/2280 type M.2 SSD.  Supports only M.2 key B SATA-Bus SSD and not supports M.2 Key M PCI-E SSD. 3.3V power supply is from PCIe Slot for M.2 SSD. The adapter card does not changes any performance of the SSD and easy to install. Comes with the protective cover to prevent the golden finger from being damaged or dirt. Specification: Item Type: M.2 B-Key SATA-Bus SSD to SATA3 Adapter Supported SSD: For 2230/2242/2260/2280 type M.2 SSD Item Size: 10.8 * 4cm / 4.3 * 1.6inches Item Weight: 16g / 0.6oz Package Size: 17 * 9cm / 6.7 * 3.5inches Package Weight: 41g / 1.4oz Package Include: 1 * M.2 B-Key SATA-Bus SSD to SATA3 Adapter 1 * SATA Cable 1 * Screwdriver 1 * Bag of Screws 1 * M

Features: This is PCI-E 4X to U2 SFF-8639 adapter card. High-speed transmission, low latency, low power consumption. Golden finger design, scratch-proof and wear-resistant, good electrical conductivity, strong oxidation resistance ability. Support U2 hard disk and 2.5 inch SATA hard disk. Widely compatible with Win7, Win8, Win 10 32/64 bit, Mac, Linux. Specification: Type: PCI-E 4X to U2 adapter card Color: Black Interface: PCI-E 4X, U2 SFF-8639 Supported system: Win7, Win8, Win 10 32/64 bit, Mac, Linux Item size: 14 * 12 * 1.85cm /5.51 * 4.72 * 0.73in Item weight: Approx. 72g /2.54oz Packing list: 1 * Adapter

Supports two M.2 SSD simultaneously (One SATA interface and one PCIE x4 interface) Converts one M.2 (M Key) interface to PCIe 3.0 x4 interface (PCIe 2.0 Compatible), Converts one M.2 (B Key or B+M Key) interface to SATA 6Gbps interface (SATA cable connection required). Supports M.2 SSD size 2230, 2242, 2260, 2280, 22110mm With advanced heat sink solution,PCB 24 X 5 copper hole effective ventilation heat dissipation. Low Profile slot brackets for flexible system chassis installation. LED power and data transfer status. No driver installation require colour: black Material: metal +PCB Package Contents: 1*M.2 (NVME & SATA) SSD Adapter Card 1*Low Profile PCIe Bracket 1*Screwdriver 1*Screw kitOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Approximate Cable Length: around 20cm from end to end ●Connector A: 15-Pin SATA Male ●Connector B: 6-Pin PCI-Express Card Power Adapter Package: 1XSATA 15-Pin Male to 6-Pin PCI-Express Card Power Adapter Cable

Features: Equipped with 4 solid state capacitors, the power supply of graphics card is safer and more stable. With SATA 15pin to 6pin power cable, more powerful, can reduce the burden of the motherboard, realize independent power supply. Graphics card slot adopts high quality connector, better contact. PCI-E connector adopts multi-layer shielded wire, the signal transmission is stable. Gold-plated finger design, wear-resistant and oxidation-resistant, increases electrical conductivity. This adapter card is designed for bitcoin mining. Specification: Type: PCI-E 1X to PCI-E 16X adapter card Color: Blue Power connector: 6Pin power cable Item size: 12.7 * 4.2 * 0.2cm / 5 * 1.65 * 0.08in Packing list: 1 * PCI-E 1X adapter 1 * PCI-E 16X board 1 * USB3.0 cable 1 * SATA 15Pin to 6Pin power

Features: Suitable for standard M.2 B-Key SATA-Bus SSD to SATA3. Supports 2230/2242/2260/2280 type M.2 SSD.  Supports only M.2 key B SATA-Bus SSD and not supports M.2 Key M PCI-E SSD. 3.3V power supply is from PCIe Slot for M.2 SSD. The adapter card does not changes any performance of the SSD and easy to install. Comes with the protective cover to prevent the golden finger from being damaged or dirt. Specification: Item Type: M.2 B-Key SATA-Bus SSD to SATA3 Adapter Supported SSD: For 2230/2242/2260/2280 type M.2 SSD Heatsink: Black, Gold (Optional) Item Size: 10.8 * 4cm / 4.3 * 1.6inches Item Weight: 16g / 0.6oz Package Size: 19.5 * 14.9cm / 7.7 * 5.9inches Package Weight: 66g / 2.3oz Package Include: 1 * M.2 B-Key SATA-Bus SSD to SATA3 Adapter 1 * User Manual 1 * M.2 SSD Heatsink 4 * Silica Gel Rings 2 * Wipes 1 * SATA Cable 1 * Screwdriver 1 * Bag of S

100% brand new and high quality Connects mSATA SSD to NGFF B+M Key motherboard. Compliant with PCI Express M.2 specification 1.0. Compliant with SATA III specification. Supports data transfer up to 6.0Gb/s. Supports 27mm half-height & 50mm full-height mSATA SSD. Supports socket 2 (B Key) & socket 3 (M Key). One mSATA Mini PCI-E socket and one NGFF M.2 B+M Key male connector available. 3 screw holes 2242/2260/2280 available to fix PCB board 4 screw holes available to fix mSATA SSD. Easy installation & no driver required. No additional power required. Supports boot function. Supports any OS, like Windows, WinCE & Linux etc. Board Size:(L*W)9.90*6.60cm/3.89 inch*2.60 inch Quantity:1Pc Color: green Material: PC Package Contents:1 * Adapter CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: Brand new and high quality. Fully compliant with 1.8" micro SATA (mSATA) specification 3.3 Volt Mini PCI-e mSATA SSD (mSATA Module) Support Mini PCI-e 52 pin Connector Size: 7cm x 4cm x 0.5cm-2.76inch x 1.57inch x 0.19inch. Supports DOS, Win98/SE, 2000, Server 2003, XP, Vista, win7, win8, Sever 2008 & Mac OS & Linux. Package Includes: 1 x Mini PCIe PCI-e mSATA 3x5cm SSD To 1.8" Micro SATA Adapter Converter