Battery raspberry pi 3

A power module specially designed for Raspberry Pi, which allows the use of Raspberry Pi in a mobile form · Battery capacity: 3800 mAH (maximum); Current Rating: 1.8A · Output voltage (without load): 5.1 V ± 0.1 V · Dual USB outputs, one for the Raspberry Pi, the other for the built-in LCD screen · Comes with mounting brackets, screws and nut, so you can stack the Raspberry Pi board in the module Technical details introduction The power module is designed for the Raspberry Pi 3 Model B especially, allowing the master board to work offline for up to 9 hours. It is not just the supply for Raspberry Pi; This board has 2 Type-One USB ports-one power supplies for the Raspberry Pi and the other for the LCD in-built display. The module integrates a Li-ion Battery charger IC, a power management chip chip. And it is developed in strict accordance with the size of the HAT Raspberry Pi international expansion board, using only simple copper brackets to install Raspberry Pi multi-layer boards. specifications: The capacity of the battery: 3800 mAH Maximum discharge current: 1.8A No-load output voltage: 5.1 V ± 0.1 V Standard load current / voltage: 1.0A / 5.0V Cut-off voltage to fully charge Li-ion battery: 4.18V-4.2V Size: 8.5*4.5/3.35"*1.77" Package 1 * Lithium Battery Expansion Board (with lithium battery) 4 * impasse of Copper 4 * Screw 4

Bộ vỏ Pi 2, 3 gồm: 1. Nguồn USB 5V 2.5A kèm cáp (có nút tắt mở) 2. Vỏ Case Mica cho Raspberry Pi 2, 3 3. Quạt tản nhiệt 4. Nhôm tản nhiệt Bộ vỏ Pi 4 gồm: 1. Nguồn USB 5V 3A Type C kèm cáp (có nút tắt mở) 2. Vỏ Case Mica cho Raspberry Pi 4 3. Quạt tản nhiệt 4. Nhôm tản nhiệt #raspberrypi #pi3 #pi3b+ #homeassistant #nhathongminh

A power module specially designed for Raspberry Pi, which allows the use of Raspberry Pi in a mobile form · Battery capacity: 3800 mAH (maximum); Current Rating: 1.8A · Output voltage (without load): 5.1 V ± 0.1 V · Dual USB outputs, one for the Raspberry Pi, the other for the built-in LCD screen · Comes with mounting brackets, screws and nut, so you can stack the Raspberry Pi board in the module Technical details introduction The power module is designed for the Raspberry Pi 3 Model B especially, allowing the master board to work offline for up to 9 hours. It is not just the supply for Raspberry Pi; This board has 2 Type-One USB ports-one power supplies for the Raspberry Pi and the other for the LCD in-built display. The module integrates a Li-ion Battery charger IC, a power management chip chip. And it is developed in strict accordance with the size of the HAT Raspberry Pi international expansion board, using only simple copper brackets to install Raspberry Pi multi-layer boards. specifications: The capacity of the battery: 3800 mAH Maximum discharge current: 1.8A No-load output voltage: 5.1 V ± 0.1 V Standard load current / voltage: 1.0A / 5.0V Cut-off voltage to fully charge Li-ion battery: 4.18V-4.2V Size: 8.5*4.5/3.35"*1.77" Package 1 * Lithium Battery Expansion Board (with lithium battery) 4 * impasse of Copper 4 * Screw 4

Raspberry Pi 4 Model B 2019 Raspberry Pi 4 có hình dáng bên ngoài vẫn nhỏ bé như các phiên bản trước, tuy nhiên cấu trúc bo mạch thì đã thay đổi hoàn toàn. Vì vậy bạn không thể sử dụng vỏ case của các phiên bản trước đó cho phiên bản 4 này. Bên cạnh đó, hãng cũng có thông báo về việc phải sử dụng nguồn 5V – 3A trở lên cho bo mạch Raspberry Pi 4. Thông Số Kỹ Thuật: Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz Có 3 lựa chọn RAM: 1GB, 2GB hoặc 4GB LPDDR4-2400 SDRAM Wifi chuẩn 2.4 GHz và 5.0 GHz IEEE 802.11ac. Bluetooth 5.0, BLE Cổng mạng Gigabit Ethernet 2 cổng USB 3.0 và 2 cổng USB 2.0 Chuẩn 40 chân GPIO, tương thích với các phiên bản trước Hỗ trợ 2 cổng ra màn hình chuẩn Micro HDMI với độ phân giải lên tới 4K Cổng MIPI DSI Cổng MIPI CSI Cổng AV 4 chân H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode) OpenGL ES 3.0 graphics Khe cắm Micro-SD cho hệ điều hành và lưu trữ Nguồn điện DC 5V – 3A DC chuẩn USB-C 5V DC via GPIO header (minimum 3A*) Hỗ trợ Power over Ethernet (PoE) (yêu cầu có PoE HAT) Một số điểm nâng cấp của Raspberry Pi 4 Model B CPU mạnh hơn Hỗ trợ chuẩn USB 3.0. RAM DDR4 thay vì DDR2 như cũ. Cổng mạng Ethernet Gigabit Có 2 cổng ra màn hình với độ phân giải 4K. Nguồn điện yêu cầu 5V – 3A thay vì 5V 2.5A như cũ Bluetooth nâng cấp từ phiên bản 4.0 lên 5.0 Đầu kết nối chuyển từ micro USB type B sang USB type C. Hỗ trợ màn hình kép với độ phân giải lên tới 4K. Đầu kết nối chuyển từ HDMI type A ( kích thước đầy đủ) sang HDMI type D (micro HDMI). Magjack Gigabit Ethernet được chuyển sang bên phải của board mạch so với phiên bản trước. Raspberry Pi 4 vẫn tương thích với PoE HAT. Bộ điều khiển Ethernet trên SoC chính được kết nối với PHY Broadcom bên ngoài qua liên kết RGMII chuyên dụng, cung cấp thông lượng đầy đủ - (Full-throughput Gigabit Ethernet). USB được cung cấp thông qua bộ điều khiển VLI bên ngoài, được kết nối qua PCI Express Gen 2 duy nhất và cung cấp tổng băng thông 4Gbps, được chia sẻ giữa bốn cổng. Để hỗ trợ Raspberry Pi 4, Raspberry Pi Foundation đang cung cấp một hệ điều hành dựa trên bản phát hành Debian 10 Buster sắp tới.     Một bước tiến đáng chú ý là đối với Raspberry Pi 4 là việc sử dụng trình điều khiển Mesa Hồi V3D, được phát triển bởi Eric Anholt tại Broadcom trong năm năm qua. Điều này mang lại nhiều lợi ích, bao gồm trình duyệt web và thành phần máy tính để bàn được tăng tốc OpenGL và khả năng chạy các ứng Mua Raspnerry Pi 4 Tại Linh Kiện Điện Tử -3M Bảo Hành 6 Tháng. Cam kết hàng chính

A power module specially designed for Raspberry Pi, which allows the use of Raspberry Pi in a mobile form · Battery capacity: 3800 mAH (maximum); Current Rating: 1.8A · Output voltage (without load): 5.1 V ± 0.1 V · Dual USB outputs, one for the Raspberry Pi, the other for the built-in LCD screen · Comes with mounting brackets, screws and nut, so you can stack the Raspberry Pi board in the module Technical details introduction The power module is designed for the Raspberry Pi 3 Model B especially, allowing the master board to work offline for up to 9 hours. It is not just the supply for Raspberry Pi; This board has 2 Type-One USB ports-one power supplies for the Raspberry Pi and the other for the LCD in-built display. The module integrates a Li-ion Battery charger IC, a power management chip chip. And it is developed in strict accordance with the size of the HAT Raspberry Pi international expansion board, using only simple copper brackets to install Raspberry Pi multi-layer boards. specifications: The capacity of the battery: 3800 mAH Maximum discharge current: 1.8A No-load output voltage: 5.1 V ± 0.1 V Standard load current / voltage: 1.0A / 5.0V Cut-off voltage to fully charge Li-ion battery: 4.18V-4.2V Size: 8.5*4.5/3.35"*1.77" Package 1 * Lithium Battery Expansion Board (with lithium battery) 4 * impasse of Copper 4 * Screw 4

A power module specially designed for Raspberry Pi, which allows the use of Raspberry Pi in a mobile form · Battery capacity: 3800 mAH (maximum); Current Rating: 1.8A · Output voltage (without load): 5.1 V ± 0.1 V · Dual USB outputs, one for the Raspberry Pi, the other for the built-in LCD screen · Comes with mounting brackets, screws and nut, so you can stack the Raspberry Pi board in the module Technical details introduction The power module is designed for the Raspberry Pi 3 Model B especially, allowing the master board to work offline for up to 9 hours. It is not just the supply for Raspberry Pi; This board has 2 Type-One USB ports-one power supplies for the Raspberry Pi and the other for the LCD in-built display. The module integrates a Li-ion Battery charger IC, a power management chip chip. And it is developed in strict accordance with the size of the HAT Raspberry Pi international expansion board, using only simple copper brackets to install Raspberry Pi multi-layer boards. specifications: The capacity of the battery: 3800 mAH Maximum discharge current: 1.8A No-load output voltage: 5.1 V ± 0.1 V Standard load current / voltage: 1.0A / 5.0V Cut-off voltage to fully charge Li-ion battery: 4.18V-4.2V Size: 8.5*4.5/3.35"*1.77" Package 1 * Lithium Battery Expansion Board (with lithium battery) 4 * impasse of Copper 4 * Screw 4

Tản nhiệt cho Raspberry Pi 4 được sử dụng làm mát, giảm nhiệt cho chip trên Raspberry Pi 4. Qua đó nâng cao hiệu suất cũng như tuổi thọ của Raspberry Pi 4 B trong quá trình sử dụng. Bộ sản phẩm gồm 4 miếng: + 1 Miếng Cho CPU - Được làm bằng đồng, hấp thụ nhiệt rất tốt. + 3 miếng dán chip khác: Làm bằng nhôm, tiết diện tiếp xúc với không khí rất lớn, nâng cao khả năng làm mát cho thiết bị. #pi4, #pi4B, #tản, #nhiệt, #pi, #4b ============================================================ Sản phẩm được cung cấp bởi VinhBaoABC. Shop chuyên cung cấp thiết bị thông minh và các thiết bị gia đình. Cảm ơn và chúc quý khách luôn vui vẻ, mạnh khỏe, thành công và thịnh v

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Welcome to our store-shoppingeverydays------------------------------- We Offer Various Electronic items. Include:Computer Accessories、phone Accessories 2x 20 Pins GPIO Female Header Kit for Raspberry Pi A+/Pi Model B+/Pi 2 Pi 3 Pi 4C Connector Module with Acrylic Base Description: Packing: You will receive 2x super high 0.1 inch pitch female Header kit, which can provide the perfect quantity according to your different needs, which can be replaced or spared. Compatible: These Header connectors are compatible with Raspberry Pi A + Pi Model B + Pi 2 Pi 3 Pi 4C. High-Quality Material: Header kit with gold plating; insulation material-PA6T, high temperature resistance; maximum contact resistance 20mΩ, nominal current 3A. Wide Application: These additional Header can be widely used in PCB circuit boards in electronics, electrical appliances and instruments. Specification: Product Size: 85 X 56 X 5mm/3.35 X 2.2 X 0.2" Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3mm measuring deviation due to manual measurement. Included: 2 X 20 Pin GPIO Headers 1 X Acrylic Base 4 X M2.5 Copper Nuts 8 X M2.5 Screws 4 X Plastic Gaskets 1 X Screwd

___________________❀Welcomehome❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ☞“Like” Items: Priority Shipping ( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Features: Compatible with for raspberry pi 2 Model B. Multifunction GPIO extension board 1 to 3 port. High quality and durable. Specifications: Type: Expansion board Compatible with: development board Package List: 1* Pcs Multifunction GPIO 1 to 3 Port Extension Board 1* Set of Scr

1.GPIO 2x20-pin(40Pin) Extra Tall Female Stacking Header with Acrylic Base for Raspberry Pi A+ Pi el B+ Pi 2 3 4B 2.There aer 2 pieces extra tall female o.1 inch pitch stacking header, perfect quantity to meet your different needs, for replacement or as backup 3.The extra tall header features gold color plated; Insulation material-PA6T, high temperature resistant; Contact resistance is max 20 mΩ, nominal current is 3 AC 4. these stacking headers are compatible with Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Pi 4C 5.these extra stacking headers can be widely applied for PCB circuit boards in electronics, electrical appliances, and meters so on Speciifcations: Name:2x20P GPIO female stacking header kit Colour:As shown Material:Plastic + Metal Size:85x56mm Package Contents: 2* 2x 20P GPIO female stacking header 1* Acrylic base 4* plastic gasket 1* Screw driver 1* Screw KitOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Name el: 18650 lithium battery expansion board Power: 5V Scope of application: suitable for ESP32/ Raspberry Pi 3/UNO channel:1 channel / 2 channel / 4 channel Colour:Black + Blue Material:ABS Package Contents: 1 * 18650 Lithium Battery Holder<br />Only the above package content, other products are not included.<br />Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Giá đỡ pin 18650 Bảng phát triển V3 tương thích Raspberry pie Raspberry Pi 3 bảo vệ quá tải 5V Tấm chắn pin 18650 hiện đã được cập nhật lên V3. Bạn có thể sử dụng pin này để che chắn nguồn điện từ nhiều sản phẩm như Raspberry Pi hoặc esp8266 trong phiên bản 18650 này có tấm chắn bảo vệ. Dòng điện đầu ra có thể đạt 2A, tôi tin rằng đây sẽ là một vật dụng hữu ích. Điều gì làm cho nó đặc biệt? Bảo vệ pin (sạc quá mức hoặc xả quá mức) Đầu vào cổng micro USB Một đầu ra USB loại Sạc hiện tại 0,5A 1 công tắc điều khiển đầu ra USB? Điện áp đầu vào 5 ~ 8v Đầu ra 3 volt và 1A và đầu ra 5V điện áp 2A Chỉ báo LED (xanh lá cây, đỏ cho biết đang sạc) Cổng ra 3v X3 Cổng ra 5V X3 thận trọng với "+" và "-", bạn nên làm theo hướng "+" "-" trên PCB. Lưu ý: Nếu bạn đặt sai hướng, chip sạc sẽ bị phá hủy. Sản phẩm này không bao gồm pin

Origin : CN(Origin) Condition : New Type : Voltage Regulator Model Number : MW Application : Computer Supply Voltage : 1 Dissipation Power : 1 is_customized : Yes Type : Raspberry Pi T-Cobbler

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Sử dụng để quay video độ nét cao, cũng như chụp hình ảnh tĩnh, đồng thời có rất nhiều chế độ chụp cho Camera Module như chụp Time-Lapse, Slow-Motion và rất nhiều ứng dụng khác để tạo các hiệu ứng với chiếc camera này. Chất lượng hình ảnh, màu sắc trung thực và hiệu suất ánh sáng thấp. Đặc biệt nó hỗ trợ nhiều chuẩn video, cũng như các chế độ chụp hình. Tương thích với tất cả các phiên bản của Raspberry Pi 1, 2 ,3,4. THÔNG SỐ KỸ THUẬT:l - Sử dụng để quay video độ nét cao, cũng như chụp hình ảnh tĩnh, đồng thời có rất nhiều chế độ chụp cho Camera Module như chụp Time-Lapse, Slow-Motion và rất nhiều ứng dụng khác để tạo các hiệu ứng với chiếc camera này. - Chất lượng hình ảnh, màu sắc trung thực và hiệu suất ánh sáng thấp. Đặc biệt nó hỗ trợ nhiều chuẩn video, cũng như các chế độ chụp hình. -Tương thích với tất cả các phiên bản của Raspberry Pi 1, 2 ,3,4 THÔNG TIN CHI TIẾT: - Ống kính tiêu cự cố định - Cảm biến độ phân giải 5 megapixel - Hỗ trợ video: 1080p30, 720p60 và 640x480p90 - Kích thước: 25x 23x 9mm - Trọng lượng: 3g - Kết nối với Raspberry Pi thông qua cáp FFC - Camera Module được hỗ trợ với phiên bản mới nhất của Ras

2x 20 Pins GPIO Female Header Kit for Raspberry Pi A+/Pi Model B+/Pi 2 Pi 3 Pi 4C Connector Module with Acrylic Base Description: Packing: You will receive 2x super high 0.1 inch pitch female Header kit, which can provide the perfect quantity according to your different needs, which can be replaced or spared. Compatible: These Header connectors are compatible with Raspberry Pi A + Pi Model B + Pi 2 Pi 3 Pi 4C. High-Quality Material: Header kit with gold plating; insulation material-PA6T, high temperature resistance; maximum contact resistance 20mΩ, nominal current 3A. Wide Application: These additional Header can be widely used in PCB circuit boards in electronics, electrical appliances and instruments. Specification: Product Size: 85 X 56 X 5mm/3.35 X 2.2 X 0.2" Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3mm measuring deviation due to manual measurement. Included: 2 X 20 Pin GPIO Headers 1 X Acrylic Base 4 X M2.5 Copper Nuts 8 X M2.5 Screws 4 X Plastic Gaskets 1 X Screwd

18650 battery holder V3 development board compatible with Raspberry Pi Raspberry Pi 3 overcharge protecti

#40 #Pin #Extension #Board #Adapter #40-Pin #GPIO #Cable #For #Raspberry #Pi #3 #2 #Model #B 40 Pin Extension Board Adapter 40-Pin GPIO Cable For Raspberry Pi 3 2 Model B B+ 40 Pin Extension Board Description: Features: 100% brand new and high quality. Each order comes with a 40-pin ribbon cable and assembled T-Type GPIO expansion board. Specifically designed for Raspberry pi 3 B, for Raspberry pi 2 B, for Raspberry pi 1 B+, etc. Can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard You can plug the 40-pin GPIO cable between the Pi computer and the T Type GPIO expansion board. This GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. Specifications: Material: Plastic + Metal Color: shown as pictures GPIO Cable Size: Length: 21cm (8.27in) (Approx.) Width: 5cm (1.97in) (Approx.) Compatibility: for Raspberry Pi 2 / 3 B+ Quantity: 1 Set (other accessories demo in the picture is not included) Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: (No retail package) 1 X GPIO 40-Pin Rainbow Ribbon Cable 1 X GPIO Extension

Features: Two calendar clock. Reset output and input. Low power consumption. Provide continuous timing battery backup. The device is compatible with DS3231 encapsulation and function. Complete the clock calendar function including the second, minute, time, week, date, month, and year, and provide the valid until 2100 leap year. Specification: Color: As the pictures show Temperature Range: -40℃ to +85℃ Timing accuracy is maintained: ± 5ppm (± 0.432 sec/day) Output Frequency: 1Hz and 32.768kHz Supply Voltage: +2.3V to +5.5V Digital Temperature Sensor Accuracy: ± 3 ° C Size: 1.4 x 1.3 x 1.3cm / 0.55 x 0.51 x 0.51inch Package Weight: 3g Quantity: 1pc Package included: 1 x Clock Module For Arduino Raspber

Description: 100% brand new and high quality. Feature: Made of high-quality materials, durable and sturdy, not easy to break. HdMI input, Suitable with for HdMI1.1/1.2 version, Extra high voltage board. Button switch and adjustment panel, Led backlight power, Lvds input. Easy and simple to install and operate, practical and useful. It is suitable for 7-42 inch hdmi to lvds lcd display screen. Attention: This Lcd controller board kits are for resolution 1366x768, Signal Interface 1ch 6-bit, 40 pins Lcd Panel, Please kindly check your Lcd panel Information before place the order. Specifications: Item Type: Controller Board Material: Plastic+Electronic Components Size: 73x53x9mm/2.8x2.08x0.3in Color: As shown Quantity: 1 Set Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x HdMI LvDS Controller Board Module 1 x 10 Pin Cable 1 x Keyborad 1 x LvDS

Bộ Raspberry Pi 4 bản 4GB RAM bao gồm: - 01 board Raspberry Pi 4 4GB RAM - Made in UK - 01 nguồn 3A 5V (nguồn chính hãng) - 01 thẻ nhớ MicroSDHC 16GB, 80MB/s - 01 bộ vỏ nhôm đen/trắng. - 01 bộ tản nhiệt - 01 dây MicoHDMI to HDMI Bộ Raspberry Pi 4 bao gồm lắp đặt và cài đặt sẵn Raspbian OS + Docker + Hassio. Hỗ trợ các bạn thêm các thiết bị vào Hass như công tắc, ổ cắm, điều khiển Remote, cảm biến zigbee Xiaomi, truy cập từ bên ngoài vào, backup Hass ... Vui lòng tham khảo chơi Home Assistant tại website của shop : http://nhathongmin

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

Origin : CN(Origin) Condition : New Type : Voltage Regulator Model Number : MW Application : Computer Supply Voltage : 1 Dissipation Power : 1 is_customized

Compatible with: these stacking headers are compatible with Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Pi 4C. Dimension: the pin spacing is approx. 2.54 mm/ 0.1 inch, the pin length is approx. 12 mm/ 0.47 inch, the pin thickness is approx. 0.6 mm/ 0.02 inch. Widely applications: these extra stacking headers can be widely applied for PCB circuit boards in electronics, electrical appliances, and meters so on. Colour: black Material: PC+metal Package Contents: 8 * pin headersOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

2 x 20 Pins Stacking Header for Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Pi 4. Size: Extra tall 8.5 / 5.0 / 10.5mm(tolerance 0.3mm), 2 plastic spacers. Insulation material - PA6T, high temperature resistant. These headers can be widely applied for PCB circuit boards, electrical appliances, and meters so on. Colour:Black Material:PC+metal Package Contents: 5 x pin headerOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Package quantity: you will receive 10 pieces extra tall female o.1 inch pitch stacking header, enough quantity to meet your different needs, for replacement or as backup Compatible with: these stacking headers are compatible with Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Pi 4C Dimension: the pin spacing is approx. 2.54 mm/ 0.1 inch, the pin length is approx. 12 mm/ 0.47 inch, the pin thickness is approx. 0.6 mm/ 0.02 inch; Please check the size carefully before orderingC Quality material: extra tall header features gold color plated; Insulation material - PA6T, high temperature resistant; Contact resistance is max 20 mΩ, nominal current is 3 AC Widely applications: these extra stacking headers can be widely applied for PCB circuit boards in electronics, electrical appliances, and meters so on Fits for: Suitable for Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Pi 4, breadboards, electrical appliances and so on. Colour:black Material:PC+metal Package Contents: 10 * extra tall female 0.1 inch pitch stacking headerOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dimensions: 5mm x 51mm x 23mm / 0.2inch x 2inch x 0.9inch Pin Length: 12mm; Pin Spacing: 2.5mm / 0.1inch; Pin Thickness: 0.6mm / 0.02inch It's a Stacking Header for Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 - 2x20 Extra Tall Stackable Header 2 Spacers. Stack multiple plates, breakouts etc onto your Raspberry Pi with this 2x20 female header. The female header part has total 24mm extra tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. Plastic height is 8.5mm, pin length 10.5mm so that when a standard 1.5mm thickness PCB is installed, there will be remaining plenty to plug into. Pins: 2x20 Compatible with Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Colour: black Material: PC+metal Package Contents: 4 x pin headersOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Description: Features: 100% brand new and high quality. Each order comes with a 40-pin ribbon cable and assembled T-Type GPIO expansion board. Specifically designed for Raspberry pi 3 B, for Raspberry pi 2 B, for Raspberry pi 1 B+, etc. Can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless breadboard You can plug the 40-pin GPIO cable between the Pi computer and the T Type GPIO expansion board. This GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little easier to read the labels. Specifications: Material: Plastic + Metal Color: shown as pictures GPIO Cable Size: Length: 21cm (8.27in) (Approx.) Width: 5cm (1.97in) (Approx.) Compatibility: for Raspberry Pi 2 / 3 B+ Quantity: 1 Set (other accessories demo in the picture is not included) Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: (No retail package) 1 X GPIO 40-Pin Rainbow Ribbon Cable 1 X GPIO Extension

Compatible with: these stacking headers are compatible with Raspberry Pi A+ Pi el B+ Pi 2 Pi 3 Pi 4C. Dimension: the pin spacing is approx. 2.54 mm/ 0.1 inch, the pin length is approx. 12 mm/ 0.47 inch, the pin thickness is approx. 0.6 mm/ 0.02 inch. Widely applications: these extra stacking headers can be widely applied for PCB circuit boards in electronics, electrical appliances, and meters so on. Colour: black Material: PC+metal Package Contents: 8 * pin headersOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1