Thiều Hoa
Cập nhật: 03/12/2021
Top 30 bán oscilloscope cũ
#TOP 1
bán oscilloscope cũ
Mạch test oscilloscope DSO138 - kèm hộp mica
Mô tả
This DSO138 digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen. It's easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. This boost converter is an excellent match for DSO138 oscilloscope kit. It can be connected directly to the DSO138 motherboard(not included), make DSO138 oscilloscope to be a portable oscilloscope for better use.
Features:
DSO138 Kit:
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Adjustable vertical displacement, and with instructions.
With automatic, regular and one-shot modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous trigger waveform (negative delay).
Can freeze at any time waveform display (HOLD function).
Comes 1Hz /3.3V square wave test signal source.
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
The SMD has been soldered, more suitable for electronic beginner.
Case:
DIY cover for DSO138 oscilloscope.
Acrylic material, looks transparent(need to tear down the film).
Easy for electronic enthusiasts to assemble.
Specifications:
DSO138 Kit
Type: NOT Soldered DIY Kit
Maximum Real-time Sampling Rate: 1Msps
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Input Impedance: 1MΩ
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling Modes: DC / AC / GND
The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
Supply Voltage: DC 9V
PCB Size: 117 * 76mm / 4.6 * 3in
Screen Size: 52 * 40mm / 2 * 1.57in
Package Size: 18 * 12.5 * 3cm / 7.08 * 4.92 * 1.18in
Package Weight: 119g / 4.21oz
Note:
One oscilloscope DIY kit is all items are not soldered yet, the other kit has been soldered the SMD. Please choose what you like!
Case:
Material: Acrylic
Item Weight: 156g / 5.52oz
Package Size: 16 * 10 * 4cm / 6.3 * 3.94 * 1.57in
Package Weight: 192g / 6.79oz
Package List:
1 * DIY Cover for DSO138
1 * DSO138 Digital Oscilloscope Kit
1 * Probe
3 * User Manual(Eng
Xem thêm
#TOP 2
bán oscilloscope cũ
Máy Hiện Sóng DSO150❤️Máy Oscilloscope Mini
Mô tả
❤️❤️Quý Khách Ủng Hộ Shop Nhé, Vui Lòng Xem Các Vocher Giảm Giá Mua Hàng Nhé Khách Yêu💚💚
🍀Ứng Dụng:
- Máy hiện sóng Oscilloscope - DSO150 sử dụng bộ xử lý ARM Cortex-M3 và với màn hình TFT 2.4-inch. Máy có thể hiển thị dạng sóng thông số, chẳng hạn như tần số, thời gian, độ rộng xung, duty ratio, các giá trị Min/Max, đỉnh - đỉnh.
- Các chế độ hiển thị Trigger Auto / Normal / Single.
- Chế độ Hold giữ sóng hiển thị.
- Nếu bạn là học sinh, sinh viên, người mới bắt đầu học tập, nghiên cứu điện tử, hay bạn đang cần thiết bị hiện sóng nhỏ gọn ứng dụng giảng dạy thì Máy hiện sóng - DSO150 là thiết bị hoàn hảo cho bạn.
*Lưu ý : Nên sử dụng nguồn ổn định (Từ Pin, Ăc quy, Nguồn đa năng, Adapter chính hãng) cho Máy Hiện Sóng. Để thiết bị hoạt động ổn định, tránh vấn đề hỏng hóc trong quá trình sử dụng.
* Hạn chế hoặc không sử dụng nguồn xung (Tổ ong) để cấp nguồn cho thiết bị.
🍀Thông số kỹ thuật:
- Điện Áp hoạt động : DC 9 V (8-10 V).
- Tốc Độ Lấy Mẫu thời gian Thực tối đa : 1MSa/s.
- Băng Thông tương tự: 0-200 KHz.
- Phạm Vi độ nhạy: 5mV/div-20mV/idv.
- Điện áp vào tối đa (tín hiệu) : 50Vpk (1X thăm dò).
- Trở kháng đầu vào: 1 MΩs/20pF.
- Độ chính xác: 12 Bit.
- Record Length: 1024 points.
- Các chế độ kết hợp : DC/AC/GND.
- Khoảng thời gian cơ bản : 500 s/Div-10us/Div.
- Trigger Modes: Auto, Normal, and Single.
- Trigger Position: Center of Buffer.
- Dòng tiêu thụ: ~ 120mA @ 9 V.
- Kích thước màn hình: 52*40 mét/2 * 1.57in.
- Trọng Lượng: 179 g.
"✅ Cam Kết Đúng Sản Phẩm
💵 Hoàn Tiền Và Trả Hàng Theo Quy Định
🔋 Chúc Quý Khách Có Nhiều Năng Lượng
🤙 Cần Thông Tin Sản Phẩm Và Thắc Mắc Liên Hệ Za. Lo"
#dientuhanoi#dientugiare#linhkiendientu#banlinhkien#cungcaplinhkien#shoplinhkien#m2moffice#m2mgroup
#mayhiensong#Oscilloscope#maydoOscillo
Xem thêm
#TOP 3
bán oscilloscope cũ
Que Đo Máy Hiện Sóng 20Mhz - Oscilloscope probe 20Mhz
Mô tả
TÍNH NĂNG SẢN PHẨM
- Dùng cho máy hiện sóng
--------------------------------------------------------------------------------------------------------------------------------------
LINH KIỆN THÀNH CÔNG
Hotline bán hàng (Zalo): 037.232.5840
Hotline kỹ thuật (Zalo): 032.944.9896
Địa chỉ: Phố Vọng, Hai Bà Trưng, Hà Nội
--------------------------------------------------------------------------------------------------------------------------------------
"Linh Kiện Thành Công" luôn cam kết:
- Sản phẩm đúng với hình ảnh đã đăng.
- Tất cả các sản phẩm được kiểm tra trước khi giao
- Tư vấn & hỗ trợ kỹ thuật miễn phí khi khách hàng mua sản phẩm.
- Hoàn tiền 100% nếu sản phẩm không giống hình ảnh hoặc lỗi do nhà sản xuất.
- Giá tốt nhất thị trường, Dịch vụ sau bán hàng luôn làm hài lòng khách hàng khó tính nhất.
#quedomayhie
Xem thêm
#TOP 4
bán oscilloscope cũ
HT307A Automotive Oscilloscope Acupuncture Probe Pins Set Diagnosis Test Repair Tools
Mô tả
❤ * ❤ * ❤ * Welcome to #RRIANFO *❤ * ❤ * ❤
★★★★Surprises for you★★★★
☛Follow Shop;Free gift for you!
☛High comment: Priority Shipping + 5% discount for next order!
☛Shipping within 1-24 hours!
☛Ready stock and fast shipping!
☛wish you a happy shopping!
❤ * ❤ * ❤ * information *❤ * ❤ * ❤
Features:
1. Sharp pin with small diameter
makes it ideal for piercing the insulation of small gauge wires.
2. It is recoverable. if the pin gets
damaged or useless, just pull out the old pin and install the new one.
3. The probe has a banana plug for use in
combination with the oscilloscope.
4. Comes with 20 replacement pins, convenient
to replace the damaged or useless one.
5. They can also work as pin-tip probes for
small circuit boards.
Specification:
Condition:
100% brand new
Probe
Casing Color: Red, Black, Yellow, Green, Blue
Probe
Total Length: 65mm/2.56in
Pin
Length: 37mm/1.45in
Weight: Approx.
35g/1.2oz
Package
list:
5 *
Complete Probes
20 *
Replacement Pins
Note:
1. Due to the difference between monitors and light effect, the
pictures may not reflect the actual
color of the item.
2. Please allow slight error due to manual measurement. Thanks for
your understanding.
#AutomotiveProbe #AutomotiveOscilloscopeProbe #AutomotiveRepairProbe #AutomotiveDiagnosisProbe #AutomotiveTestP
Xem thêm
#TOP 5
bán oscilloscope cũ
FL【COD Ready】DSO138 2.4" TFT LCD Digital Oscilloscope Test 1Msps 200KHz Bandwidth with Probe
Mô tả
Description:
Item type: DSO138
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs/ Div - 50s / Div ( 1-2-5 progressive manner )
Package Include:
1 x DSO138
1 x box packaging
Note:
The colors deviation might differ due to different monitor settings.
We provide you with the best product and service, if you have any problem, please let us know, and we will solve the problem ASAP. Thank you so
Xem thêm
#TOP 6
bán oscilloscope cũ
Stylish365 LA05110 1M 100MHz PVC Test Lead Kit Oscilloscope Probe Accessories
Mô tả
Features:
1. This probe is good oscilloscope accessories, it is suitable for oscilloscope.
2. Stable performance, good softness and not easy to break
3. With insulated protective cover to ensure its own safety, the top of it is not easy to deform
4. This can provide professional and accurate measurement.
5. Widely used, it can satisfy most peoples.
6. A good helper for instrument engineer.
Specification:
Condition: 100% Brand New
Model: LA05110
Material: PVC
Bandwidth: 100MHz
Max Input Voltage: 600V
Attenuation: X1, X10±2%
Line length: Approx. 130mm
Impedance: 1MΩ-10MΩ
Weight: Approx. 80g / 2.8oz
Package List:
1 * Test L
Xem thêm
#TOP 7
bán oscilloscope cũ
Bảng Mạch Máy Hiện Sóng Dao Động Dso138 2.4 "Tft
Mô tả
Product desceiption:
Training for electronic production , complete detailed descriptive information ,
Including schematics , production guidance , instructions ,
Troubleshooting methods , etc., making a high success rate .
Component species diversity for students to identify elements ,
Inline elements welding, soldering SMD components training.
Students can get in at the same time making a practical tool
For audio, video synchronization , low-frequency switching power supply ,
Infrared receiver transmitter signal waveform and many other occasions,
Effectively observed and measured , increased interest in learning, improve learning outcomes .
Kits using ARM Cortex-M3 processor (STM32F103C8),
And includes a 2.4 -inch color TFT display can be used as test ARM development board .
Available source , the ability of a friend can be secondary development kit based on ,
For example, it can be changed to Millivoltmeter , data loggers , and so on .
Circuit is simple , reliable , inexpensive
Performance
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source
Package included:
1Pcs
Xem thêm
#TOP 8
bán oscilloscope cũ
Bộ dao động kỹ thuật số hiện sóng bằng acrylic tft 2.4" làm thủ công trong học tập
Mô tả
Welcome to Homeliving shop, enjoy your shopping moment! Please consult our customer service if you have any problems in the process of shopping, thank you!Product desceiption:
Training for electronic production , complete detailed descriptive information ,
Including schematics , production guidance , instructions ,
Troubleshooting methods , etc., making a high success rate .
Component species diversity for students to identify elements ,
Inline elements welding, soldering SMD components training.
Students can get in at the same time making a practical tool
For audio, video synchronization , low-frequency switching power supply ,
Infrared receiver transmitter signal waveform and many other occasions,
Effectively observed and measured , increased interest in learning, improve learning outcomes .
Kits using ARM Cortex-M3 processor (STM32F103C8),
And includes a 2.4 -inch color TFT display can be used as test ARM development board .
Available source , the ability of a friend can be secondary development kit based on ,
For example, it can be changed to Millivoltmeter , data loggers , and so on .
Circuit is simple , reliable , inexpensive
Performance
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source
Package included:
1Pcs (
Xem thêm
#TOP 9
bán oscilloscope cũ
Máy hiện sóng Hantek DSO5072P 2 kênh dải đo 70Mhz - Digital Oscilloscope DSO5072P
Mô tả
HANTEK DSO5072P 70MHz 1Gs/s Digital Storage Oscilloscope DSO 2Channels 7'inch TFT LCDScopemeter with USB OTG
Thương hiệu: HANTEK
Mã đặt hàng: DSO5072P
Đặc điểm:
Specification DSO5072P
Số kênh 2
Dải đo 70Mhz
Tần số lấy mẫu. 500Ms/s-1Gs/s
Thời gian xung ≤14ns
Memory Depth 25kpts
Tốc độ ≥2000wfms/s
Dải điện áp V/div 1mV/div~20V/div
Dai thời gian times/div 10ns/div~50s/div
Lưu trữ Setup,Wave,Bitmap
Chế độ trigger Edge, Pluse, Video, Alternate
Giao diện USB OTG,Pass/Fail
Đặc tính cơ bản
Nguồn 100-240VAC, 40-440Hz
Màn hình 7 Inches 64K Color TFT LCD, 400×240
Màu sản phẩm Trắng
Trọng lượng 2.2 Kg
Kích thước (W×H×D) 306mm ×147mm × 122mm
Phụ kiện tiêu chuẩn Que đo×2 (1×,10× chế độ),Dây nguồn AC, USB cáp, CD hướng dẫn
Standard Individual Packing Gift Box, English Manual
Standard Quantity Per Carton 2 PCs
Kích thước hộp giấy (L×W×H) 450mm × 420mm × 280mm
* Địa chỉ: Số 3/63 ngõ 816 Kim Giang
* Di động / Zalo: Vũ Dương: 0967.35
Xem thêm
#TOP 10
bán oscilloscope cũ
Máy hiện sóng PC Oscilloscope Hantek 6022BE
Mô tả
Khi dùng thiết bị điện, chúng ta không thể tránh khỏi việc nó có thể bị hỏng trong quá trình sử dụng. Để có thể sửa chữa các lỗi cơ bản như mất điện, thiếu điện, điện áp thấp, dòng thấp, quá tải… chỉ cần sử dụng đồng hồ đo điện, cờ lê, tô-vít các thợ sửa chữa điện đã có thể giải quyết hơn 70% các lỗi (pan) thông thường.
Tuy nhiên, đối với các pan (lỗi) khó, cần đo ở độ chính xác cao hơn, phức tạp hơn thì các công cụ cơ bản không thể đáp ứng được. Lúc này, chúng ta cần sự trợ giúp của máy hiện sóng để giải quyết các sự cố.
Máy hiện sóng PC Oscilloscope Hantek 6022BE với thiết kế kiểu công nghiệp, vỏ nhôm anodised như IPAD không chỉ đẹp và trang nhã mà còn tăng cường độ cứng của bề mặt hợp kim nhôm, có khả năng chịu nhiệt chịu lực tốt dễ dàng di chuyển linh hoạt.
Cổng USBXI TM tiêu chuẩn (dễ dàng chèn vào vỏ USBXI TM để tạo thành một công cụ kết hợp)
Cổng USB 2.0 dễ dàng sử dụng, không cần phải cấp nguồn ngoài
Thích hợp cho máy tính xách tay, môi trường linh động, bảo trì, bảo hành
Hiệu suất cao băng thông 20MHz thời gian lấy mẫu 48MS / s
Tương thích với các hệ điều hành: Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA.
Với 23 chức năng đo, kiểm tra PASS/FALL, phù hợp cho các ứng dụng kỹ thuật
Dạng sóng trung bình, cường độ, nghịch đảo, cộng, trừ, nhân chia, biểu đồ X Y
Có thể lưu dạng sóng dưới dạng tệp: văn bản txt, ảnh jpg/bmp, excel / word
Một máy tính có thể mở nhiều màn hình DSO, mở rộng dễ dàng
Phụ kiện kèm máy: S/W CD, đầu dò, sách hướng dẫn sử dụng, dây usb
Thông số kỹ thuật
- Nhà sản xuất: Hantek Electronic CO., Ltd
- Mã sản phẩm: Hantek6022BE
- Số kênh: 2
- Điện áp Max 2 kênh: 35V ( nếu sử dụng điện áp cao hơn có thể dùng cầu chia áp)
- Băng thông: 20MHZ (Hantek6022BE)
- Trở kháng đầu vào: 1MΩ 25pF
- Tốc độ mẫu:48MS / s
- Phạm vi: 10mV – 5V, 9 bước
- Độ chính xác: ± 3%
- Phạm vi thời gian đo: 4ns – 5ks
- Xung test mặc định trên board: 1KHZ 2V p-p (xung vuông)
- Bảo vệ đầu vào: diode clamping
- Trục: XY
- Nối thêm đầu vào: No
- Triger Mode: Auto, Normal and Single
- Triger Slope: +/-
- Triger level adjustable: Yes
- Triger Type: Tăng cạnh, giảm cạnh
- Triger Source: CH1, CH2
- Pre/Post triger: 0-100%
- Bộ nhớ đệm: 1M/ 1 kênh
- Có lựa chọn lấy mẫu
- Hiển thị dạng sóng: port / line, waveform average, persistence, intensity
- Hỗ trợ đo bằng con trỏ
- Các phép toán: FFT, cộng, trừ, nhân, chia
- Con trỏ: Tần số, điện áp
- Cân nặng: 740g
- Kích thước: 200mmx120mmx30mm
- Màu sắc: đen
Lưu ý: Từ ngày 18-9 các máy không có đĩa CD ( đĩa này chứa Drive & Software), quý khách vui lòng truy cập tại địa chỉ: http://hantek.com.cn/download?word=6022be&sid=0&pid=0&key=yyrj để tải và làm theo hướng dẫn như video để sử dụ
Xem thêm
#TOP 11
bán oscilloscope cũ
[hàng mới về] Handheld Oscilloscope JDS6052S Digital Storagesignal Function Generator
Mô tả
[hàng mới về] Handheld Oscilloscope JDS6052S Digital Storagesignal Function Generator
Features:
1. This instrument has the functions of oscilloscope and signal generator, which is powerful and practical.
2. High definition LCD screen with 320 x 240 resolution IPS full screen technology, the visual effect is very good.
3. High-performance two-channel sampling channel with sampling rate up to 100MS/S and maximum bandwidth up to 25MHz.
4. The 2 analog channel handheld digital oscilloscope is easy to operate and use, portable and easy to carry.
5. Made of high quality material, this digital oscilloscope is durable and can be used for a long time.
Description:
Simple operation panel, simple and intuitive operation.
Specifications:
Number of channels: 2
Maximum real-time sampling rate: CH1 200MSa/s for single channel, CH1,CH2 100MSa/s for dual channel
Bandwidth: 50M on single channel, 25M on double channel.
Vertical resolution: 8 bits
Vertical file: 10mV-5V(probe x 1) 100mV-50V(probe x 10) 1,2,5 step
Impedance: 1MΩ 25pF
Display mode: Y-T/X-Y
Input voltage: 40V(probe x 1), 400V(probe x 10), Use high voltage probe, maximum voltage is determined by the quality of the probe
Time-base range: 12.5 ns-5s 100ms-5s is scan mode(scan).
Storage depth: 3K per channel
Trigger mode: Automatic, normal and single
Trigger type: Up, down
Automatic detection: 50Hz-20MHz
Cursor measurement: Time, voltage(manual mode)
Recordable contrast waveform: 2
Screenshot function: Support
Numerical calculation: CH1+CH2, CH1-CH2,CH2-CH1
Self-calibration: Support
Number of channels: 1
Frequency :Sine wave (1Hz-5MHz)
Square wave :(1Hz-1MHz)
Forward sawtooth wave :(1Hz-1MHz)
Reverse sawtooth wave: (1Hz-1MHz)
Range :100mV-8V
Offset :Maximum +-(0V-4V)
Duty ratio :0%-100%
Type:US,EU optional
Color:black
Package Included:
1 x Oscilloscope
1 x CD
1 x Charger
1 x USB Data Cable
1 x Data Connection Line
2 x Probe(with Instruction Manual)
1 x Set of Probe Adjustment
1 x Screen Film
Notes:
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Please allow slight dimension difference due to different manual measure
Xem thêm
#TOP 12
bán oscilloscope cũ
DSO188 Handheld Mini Digital Display Stable Engineering 5M Sample Rate Bandwidth Oscilloscope Set
Mô tả
Features:
This is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements.
Small size, light weight, easy to carry, can be operated by hand.
A variety of trigger modes, support positive and negative edge trigger, logic trigger, pulse width trigger.
Powerful waveform processing capability, can automatically measure voltage, frequency, pulse width and other parameters.
It is great for production test, research, design and education.
Specifications:
Product name: mini oscilloscope
Color: white
Bandwidth: 1MHz
Max sample rate: 5MSa/s
Screen size: 1.8inch
Storage: 40KB
Size: about 57 x 34 x 11mm
Number of channels: 1
Input impedance: 1M
Battery capacity: built in 300mAh batteries
Rise time: less than or equal to 100ns
Vertical sensitivity: 50mv/div-200V/div
Horizontal time base range: 100mS/div ~ 2uS/div
Trigger mode: rising/falling edge trigger
Maximum input voltage: 1X40 V, 10X600 V
Power supply: 5V/1A, 5V/2A, 5V/4A
Package included:
1pc x mini oscilloscope
1pc x MCX adapters
1pc x usb cable
1pc x instruction manual
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
#Oscilloscope #Set #DSO188 #Digital #Display #5M #Sample #Rate #Electronic #Handheld #Mini #Portable #Stable #Mainte
Xem thêm
#TOP 13
bán oscilloscope cũ
Que Đo Máy Hiện Sóng 👉 Đầu Dò BNC Oscilloscope 👈 P6100 100Mhz
Mô tả
Que Đo Máy Hiện Sóng 👉 Đầu Dò BNC Oscilloscope 👈 P6100 100Mhz
Hàng mới
- Mẫu sản phẩm: P6100
- Loại sản phẩm: Đầu dò BNC
- Tỷ lệ suy giảm: 1X; 10X
- Dãy tần số đo: 100MHz
- Thời gian đáp ứng:3.5ns ( 10:1 ), 58ns (1:1)
- Điện trở đầu vào: 1X: 1MΩ ± 2%; 10X: 10MΩ ± 2%
- Điện dung đầu vào: 1X: 70pF ~ 120pF 10X: 13pF ~ 17pF
- Đầu vào tối đa: X1: :<150VDC+Peak AC
X10: :<300VDC+Peak AC
- Môi trường hoạt động: 0 ~ 50 ℃, 0 ~ 80% RH
- Môi trường bảo quản: -20 ~ 60 ℃, 0 ~ 85% RH
#Oscilloscope #queDoMayHienSong #DauDoOscilloscope #QueDo #DauDo
Xem thêm
#TOP 14
bán oscilloscope cũ
Assembled Digital Easy Use Electronic Intelligent Multi Function Oscilloscope
Mô tả
Description:
Vertical displacement adjustable with indication.
Digital display with waveform parameters: frequency, period, pulse width, duty cycle, maximum value, minimum value, average value, effective value.
With automatic, regular and single trigger mode, convenient to capture instantaneous waveforms.
Can be triggered by rising or falling edges.
The waveform display can be frozen at any time.
Specifications:
Product name: Oscilloscope
Color: Beige
Material: Plastic
Highest real-time sampling rate: 1Msps
Accuracy: 12Bit
Sample buffer depth: 1024 Bytes
Analog bandwidth: 0 - 200KHz
Vertical sensitivity: 5mV/Div 20V/Div (inward by 1-2-5)
Input impedance: 1M
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling mode: DC/A C/GND
Horizontal time base range: 10s/Div 50s/Div
Size: About 14* 9.5* 3 cm
Package Included:
1 x Oscilloscope
1 x Test clip
Note:
Transition: 1cm=10mm=0.39inch.
1.Due to the light and screen difference, the item's color may be slightly different from the pictures.
2.Please allow 0.5-2 cm differences due to manual measurement.
#Oscilloscope #Assembled #Digital #With #Indication #Automatic #Easy #Use #Electronic #High #Accuracy #Intelligent #Multi #Fun
Xem thêm
#TOP 15
bán oscilloscope cũ
Que đo HANTEK T3100 Oscilloscope Probe (100 :1, 2500V)
Mô tả
QUE ĐO HANTEK T3100 đầu dò T3100 được thiết kế như một bộ phận mạnh mẽ, linh hoạt và đáng tin cậy cho máy hiện sóng theo chức năng cơ thể con người. Nó tương thích với tất cả các máy hiện sóng kỹ thuật số và máy hiện sóng tương tự với tần số chi tiết quốc tế.
THÔNG SỐ KỸ THUẬT :
Model : T3100
Đầu vào cho DPT:X100: 14.5pF ~ 17.5pF
Băng thông hệ thống :DC ~ 100 mhz
Đầu vào điện áp làm việc tối đa:X100: <2000VDC + AC Peak
Cân nặng :81 grams
Chiều dài của cáp:120 cm
QUY ĐỊNH BẢO HÀNH VÀ ĐỔI TRẢ
Hỗ trợ kiểm tra.
Cam kết đổi trả trong 7 ngày với các trường hợp lỗi do sản phẩm.
Shop chỉ sử lý các trường hợp thiếu hàng khi có video mở hộp.
Các trường hợp không may phát sinh về vấn đề kỹ thuật hỏng hóc vui lòng liên hệ shop để được hỗ trợ trong giờ hành chính.
Shop cam kết sản phẩm đúng như hình ảnh. Hỗ trợ sửa chữa cho khách hàng dù sản phẩm đã hết bảo hành.
Cám ơn các bạn đã mua sản phẩm của SMDCHIP.
#do #quedo #que #oscilloscope #hantek #quedohantek #probe #smd #sm
Xem thêm
#TOP 16
bán oscilloscope cũ
Dây Đo Oscilloscope P60 100MHZ Suy Giảm 10:1 1:1
Mô tả
Dây đo oscilloscope P60 100MHZ được sử dụng trong các máy Oscilloscope cần độ chính xác cao, dây có băng thông lên tới 100Mhz với độ trễ 3.5ns đảm bảo cho kết quả đo đạt được độ chính xác cao nhất.
Dây đo P60 có 2 chế độ, 1:1 và 10:1 (đo suy giảm, qua đó tăng phạm vi đo Oscillocope lên 10 lần)
Dây đo P60 cũng được sử dụng máy hiện sóng: P61, P60, DSO138
Thông số kỹ thuật Dây đo oscilloscope P60100MHZ:
- Que đo máy hiện sóng 100Mhz: P6100, P60, DSO138,...
- Chế độ: đo thường (1:1), đo suy giảm (10:1)
- Dải tần số: 100MHz
- Trở kháng vào:10MΩ(10:1),1MΩ(1:1)
- Điện dung đầu vào:18pF(10:1),90pF(1:1)
- Dải điện áp:600V ( 10:1 ) , 300V (1:1)
- Thời gian đáp ứng:3.5ns ( 10:1 ), 58ns (1:1)
- Chiều dài: 1,2m
- Trọng lượng: 65gram
#daydop60 #daydo100mhz #daydosu
Xem thêm
#TOP 17
bán oscilloscope cũ
<Hot~new>New dso138 2.4" tft digital oscilloscope acrylic case diy kit smd soldered
Mô tả
Product desceiption:
Training for electronic production , complete detailed descriptive information ,
Including schematics , production guidance , instructions ,
Troubleshooting methods , etc., making a high success rate .
Component species diversity for students to identify elements ,
Inline elements welding, soldering SMD components training.
Students can get in at the same time making a practical tool
For audio, video synchronization , low-frequency switching power supply ,
Infrared receiver transmitter signal waveform and many other occasions,
Effectively observed and measured , increased interest in learning, improve learning outcomes .
Kits using ARM Cortex-M3 processor (STM32F103C8),
And includes a 2.4 -inch color TFT display can be used as test ARM development board .
Available source , the ability of a friend can be secondary development kit based on ,
For example, it can be changed to Millivoltmeter , data loggers , and so on .
Circuit is simple , reliable , inexpensive
Performance
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source
Package included:
1Pcs
Xem thêm
#TOP 18
bán oscilloscope cũ
Máy hiện sóng cầm tay FNIRSI-1C15 Digital Oscilloscope 500MS/s 110MHz
Mô tả
GIÁ CÓ THỂ THAY ĐỔI LÊN HOẶC XUỐNG, KHI QUÝ KHÁCH ĐẶT HÀNG SHOP SẼ BÁO LẠI GIÁ CHUẨN NHẤT. CẦN MUA GÓI BẢO HÀNH DÀI VUI LÒNG CALL : 0906010103.
Shop công nghệ No2:Số Nhà 5 Ngõ 58/3/22 Trần Bình-Mai Dịch- Cầu Giấy- Hà Nôi : 0906 01 01 03 _ 0843 96 96 69.
Thông số sản phẩm: Mô hình: FNIRSI-1C15 Số kênh:
1 Kích thước màn hình: 2.4 inch Độ Phân Giải màn hình: 320*240 Analog băng thông: 110M
Tốc Độ lấy mẫu: 500M 1K Hz tự kiểm tra sóng vuông: Đứng Tăng Thời Gian: <3ns Lưu trữ Độ sâu: 12 Kpts Thời gian Căn Cứ phạm vi: 5ns-10s Dọc Độ nhạy: 20mV/div-100v/div Kích hoạt chế độ:
Tự Động/Bình Thường Kích hoạt Loại: Tăng/Giảm Chế độ hiển thị: YT/cuộn Phát sáng sau thời gian: Không/1S/∞ Phương pháp sạc: 5V/800mA Điện áp Phạm vi đo lường: ± 40V (X1 tập tin);± 400V (x10 tập tin) Kênh Khớp nối: AC-DC Một nút bấm tự động:
Đứng Dạng sóng đo: 14 loại Đo độ chính xác: ± 2% Tham khảo dạng sóng:
Đứng Dạng sóng tiết kiệm: Đứng Tần số Độ chính xác: ± 0.01%.
Sản phẩm được bảo hành 1 tháng.
Gía sản phẩm chưa bao gồm cước vận chuyển
Khách hàng đổi sản phẩm không do lỗi của sản phẩm( khách hàng chịu phí vận chuyển) khách hàng trả lại sản phẩm sẽ mất phu phí
Thời gian bảo hành từ thứ 2- thứ 7 bắt đầu từ 13h30-17h30
Shop công nghệ No2: 0906 01 01 03 _ 0843 96 96 69
FB:https://goo.gl/c1ByKL
Shop: https://goo.gl/kzzV
Xem thêm
#TOP 19
bán oscilloscope cũ
Máy hiện sóng kỹ thuật số DSO138 👉 Mạch tự ráp 👈 DSO138 Digital Oscilloscope 1MSa/s 0-200KHz 50vpk
Mô tả
Máy hiện sóng DSO138
Nếu bạn muốn quan sát dạng sóng khi sửa chửa cũng như lắp ráp các mạch điện tử như các mạch Ampli, mạch kích sin chuẩn,hoặc trong sửa chửa máy vi tính ... khi bạn chưa có điều kiện mua các máy hiện sóng ( Oscilloscope ) giá cao từ vài triệu đến vài chục triệu thì DSO138 là một giải pháp lý tưởng cho bạn cấu hình của nó tuy khiêm tốn nhưng cũng đủ để đáp ứng các nhu cầu trên một cách tốt nhất
Bộ này sử dụng bộ vi xử lý ARM Cortex-M3 (STM32F103C8), và bao gồm màn hình hiển thị TFT màu 2,4 inch, có thể được sử dụng làm bảng phát triển thử nghiệm ARM.
Có thể được phát triển thứ cấp trên cơ sở của bộ này, ví dụ, nó có thể được thay đổi thành Milivoltmeter, bộ ghi dữ liệu.
Có thể điều chỉnh độ dịch chuyển theo chiều dọc và có hướng dẫn.
Với các chế độ tự động, thông thường và một lần, dễ dàng ghi lại dạng sóng trong khoảnh khắc.
Kích hoạt cạnh tăng hoặc giảm có sẵn.
Dạng sóng kích hoạt trước đó có thể quan sát được (độ trễ âm).
Có thể đóng băng bất kỳ lúc nào hiển thị dạng sóng (chức năng HOLD).
Đi kèm nguồn tín hiệu kiểm tra sóng vuông 1Hz /3.3V.
Với màn hình kỹ thuật số thông số dạng sóng, bao gồm tần số, chu kỳ, độ rộng xung, tỷ lệ nhiệm vụ, các giá trị MAX./MIN./AVG./Peak-Peak/virtual.
Chức năng lưu trữ dạng sóng: sẽ không bị mất dạng sóng sau khi tắt nguồn.
Phát hiện ngắn mạch và hở mạch: có thể giúp người dùng tìm ra lỗi hàn.
Chức năng nhận dạng bộ điều khiển TFT.
SMD đã được hàn, phù hợp hơn cho người mới bắt đầu sử dụng điện tử.
THÔNG SỐ KỸ THUẬT:
Số lượng kênh: 1
Điện áp đầu vào tối đa: 50vpk (1X đầu dò)
Băng thông Analog: 0-200KHz
Phạm vi Độ nhạy: 10mV/Div - 5V/Div
Lỗi Độ nhạy: <5%
Trở kháng đầu vào: 1m ohms/20PF
Độ phân giải: 12 bit
Độ dài kỷ lục: 1024 điểm
Chế độ Khớp nối: DC / AC / GND
Tốc độ lấy mẫu thời gian thực tối đa: 1msa/S
Khoảng thời gian cơ bản: 10us/Div - 500S/div
Chế độ kích hoạt: tự động, bình thường và đơn
Vị trí kích hoạt: Tâm đệm
Màn hình: Màn hình TFT LCD màu 2.4 "với độ phân giải 320*240
Điện áp cung cấp: DC 9V
Kích thước bảng chính: 117*76mm / 4.6 * 3.1in
Kích thước bảng hiển thị: 52*40mm / 2*1.575in
Kích thước đóng gói: 18*12.5*3cm / 7.08*4.92 * 1.18in
Trọng lượng gói hàng: 119g / 4.21oz
Danh sách gói hàng:
1 * Bộ KIT máy hiện sóng kỹ thuật số tự làm DSO138
1 * Đầu dò
1 * Hướng dẫn sử dụng (tiếng Anh)
1 * Shematic
#mayhiensong #Oscilloscope #maydaodongkythuatso #DSO138 #DSO138mini #D
Xem thêm
#TOP 20
bán oscilloscope cũ
Máy Đo Dao Động Dso138 2.4 "Tft
Mô tả
Dear friend, welcome to our shop!Hope you have happy shopping!More discount are waiting for you!
Product desceiption:
Training for electronic production , complete detailed descriptive information ,
Including schematics , production guidance , instructions ,
Troubleshooting methods , etc., making a high success rate .
Component species diversity for students to identify elements ,
Inline elements welding, soldering SMD components training.
Students can get in at the same time making a practical tool
For audio, video synchronization , low-frequency switching power supply ,
Infrared receiver transmitter signal waveform and many other occasions,
Effectively observed and measured , increased interest in learning, improve learning outcomes .
Kits using ARM Cortex-M3 processor (STM32F103C8),
And includes a 2.4 -inch color TFT display can be used as test ARM development board .
Available source , the ability of a friend can be secondary development kit based on ,
For example, it can be changed to Millivoltmeter , data loggers , and so on .
Circuit is simple , reliable , inexpensive
Performance
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source
Package included:
1Pcs
Xem thêm
#TOP 21
bán oscilloscope cũ
Máy oscilloscope mini cầm tay
Mô tả
- oscilloscope mini cầm tay
- Chức năng hoạt động của thiết bị
Số Kênh: 2
Analog Băng Thông: DC - 200KHz
Độ nhạy: 5mV/Div - 20V/Div (với X1 dò)
Độ sai số Lỗi: < 5%
Độ phân giải: 12-bit
Trở Kháng đầu vào: 1M ohm / 25pF
Điện Áp Đầu Vào tối đa: 50Vpk
Khớp nối: DC, AC
Thời gian Tối đa Thực Tốc Độ Lấy Mẫu: 1Msps (mỗi kênh)
Timebase: 10us/Div - 500S/Div
Dài: 1024 điểm
Kích hoạt Chế Độ: Tự Động, Bình Thường, Đơn
Kích hoạt Loại: Rising/rơi cạnh
Kích hoạt Chức Vụ: 1/2 Kích thước đệm
Kích hoạt lưu kênh: Ch1, Ch2
Kích Hoạt Điện Áp tối đa : 15V
Số kênh: 2
Dạng sóng Loại: Sin, biểu thị( Vuông răng cưa, Cầu Thang)
Dải tần số: DC - 20KHz (Sin)
Biên độ Phạm Vi: 0 - 3V ( giá trị cao điểm )
Bù đắp: 0V hoặc + 3.3V
Chu kỳ làm việc: 0 - 100%
Giai đoạn: -360 - 360 độ
Nguồn điện Cung Cấp:
Sử dụng nguồn điện vào 3.7V Li-ion pin hoặc USB
Dòng điện Tiêu Thụ: ~ 300mA @ 3.7 - 5V
Tự động tắt nguồn khi không làm việc
Pin Thời gian chạy: Appr. 3hrs (khi sạc đầy)
Màn hình màu 2.4 "320x240 cảm ứng đa điểm
Kết nối qua phần mềm pc hiện thị trực quan
- ứng dụng rộng rãi trong lĩnh vực sửa chữa điện thoại laptop máy tính bảng
LK - Phụ Trợ Sửa Chữa Mobile
Shop cũng cấp thiết bị phụ trợ sửa chữa điện thoại toàn quốc.
✅ Đặt hàng trực tiếp Link https://shopee.vn/trongquyet2006?smtt=0.0.9
✅ Ship cod toàn quốc.Nhận hàng đồng kiểm thanh toán
✅ Bao test bao back và bảo hành chu đáo sau bán hàng.
👉🏿 Shop nhận Oder những linh kiện thiết bị hiếm nếu quý khách có nhu cầu.
Liên Hệ : 0948759859 - 0839750777
Rất Hân Hạnh Được Phục Vụ Qúy
Xem thêm
#TOP 22
bán oscilloscope cũ
Máy hiện sóng, Oscilloscope Siglent SDS1052DL+, 50MHz, 2 CH
Mô tả
Băng thông 50MHz, tốc độ lấy mẫu 500Msa/s
Màn hình 7”TFT-LCD display, 800×480 pixel
Kênh: 2 kênh analog +1 kênh Trigger (EXT)
Bộ nhớ 32Kpts memory depth
Bộ đếm tần số 6 chữ số, màn hình hiển thị thời gian thực
Hỗ trợ lệnh SCPI (programming command control)
Giao tiếp hiện đại: USB Device, USB Host, RS-232, Pass/Fail
Có chức năng lọc kỹ thuật số và bộ ghi dữ liệu (data recorder)
Máy tích hợp sẵn 12 ngôn ngữ khác nhau, có chức năng online help, 01 phím lưu và 01 phím In (one key storing and one key printing)
Trọng lượng: 2.5KG
Kích thước: 323mm×157mm×135mm (W×H×D)
Máy hiện sóngSDS1052DL+50 MHz500 MSa/s, 2kênh32 kpts/kênh7 inch
Oscilloscope SDS1052DL+
Kỹ sư nghiên cứu phát triển sản phẩm
Kỹ thuật sửa chữa tại các trung tâm bảo hành, bảo trì thiết bị điện tử, bảo trì nhà máy
Trường Đại học, cao đẵng, trung cấp nghề …nơi mà SDS1052DL+ là sự lựa chọn hoàn hảo về cấu hình và giá cả
Phụ Kiện bao gồm:
1x Digital Oscilloscope
1x EasyScope3.0 Computer Software System
1x Power Cord
1x USB Cable
2x Probe (1:1,
Xem thêm
#TOP 23
bán oscilloscope cũ
Ooidshop Digital Oscilloscope DIY Handheld DSO FNIRSI‑150 15001K 0‑200KHz 5mV / div‑20mV idv
Mô tả
___________________❀OOID'S❀___________________
Welcome to our store, we insist on the lowest price to sell the best quality items.
✔Ready Stock ✔Wholesale Price ✔Quality Checked
★Surprises for you★
☞Shop Voucher: Get More Discount
☞Follow Shop: Free Gifts
☞“Like” Items: Priority Shipping
( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss)
★★Attention Please★★
✌We will be based on your guests in your country to send the corresponding adapter plug.
_______________❀Product Information❀______________
Feature:
1. Adopt ARM Cortex‑M3 (STM32F103C8), and include a 2.4‑inch color TFT display screen.
2. Used for secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
3. Come with instructions, easy to install and operate, with Auto/Normal/Single trigger modes, easy to capture the moment waveform.
4. Available rising or falling edge trigger, observable previous waveform before trigger(negative delay), can freeze waveform display at any time(HOLD function).
5. With waveform parameter digital display, including frequency, period, pulse width, duty ratio, Mmaximum./MIN./AVG./Peak‑Peak/virtual values.
6. With TFT controller recognition and waveform storage function, will not lose the waveform after power off.
7. Short‑circuit and open‑circuit detection: can help the user find out the soldering error, the SMD has been soldered, more suitable for electronic beginner.
Specification:
Item Type: Digital Oscilloscope Material: Engineering plastic
Purpose: DIY oscilloscope
Maximum Real-time Sampling Rate: 1MSa/s
Analog Bandwidth: 0-200KHz
Sensitivity Range: 5mV / div-20mV / idv
Maximum Input Voltage: 50Vpk (1x probe)
Input Impedance: 1MΩ / 20pF
Accuracy: 12 bits
Record Length: 1024 points
Coupling Mode: DC / AC / GND
Time Base Range: 500s / Div-10us / Div
Trigger Mode: Automatic, normal and single
Trigger Position: Buffer center
Power Supply Voltage: DC 9V (8-10V)
Package List:
1 x Oscilloscope
1 x Test Chuck
1 x User Manu
Xem thêm
#TOP 24
bán oscilloscope cũ
Superparis Mini Oscilloscope Module with 0.96in Touch Button B Type Medium Low Voltage Equipment
Mô tả
__________________♤Welcome Superparis Store♤_______________
✔Ready Stock!!Buy Now!
✔COD
✔Quality Checked
✔Best price
✈Shipping in 1 day
★Surprises for you★
☛Free Gifts:Follow Shop
❤“Like” 5 Items: Priority Shipping
✉Sent me Screenshot and Message on your order : "Free Gift",if not will Miss
✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug)
➷Wholesale retailers are welcome to negotiate long-term business with us!
__________________❀Product Information❀__________________
Feature:
1. This oscilloscope is light in weight and one‑handed operation reduces operator fatigue.
2. The mini oscilloscope is integrally formed without burrs, has a glossy exterior and glossy installation.
3. PCB adopts the whole process of spraying tin to ensure the good passing performance of large and small currents.
4. The measuring range is 0‑30k, which is easy to operate and has strong practicability.
5. With small size, multiple functions all in one, easy to use, stable performance.
Specification:
Item Type: Mini Oscilloscope ModuleMaterial: PCB
Single-Chip Microcomputer Type: STC8A8K64S4A12 at 27MHzSystem Power Supply: 5V Type-C power supply
Display Device: 0.96in Organic Light-Emitting Diode Display
Voltage Range: 0-30V
Measuring Range: 0-30K
Sampling Rate: 250KHz KSPS
Package List:
1 x Oscilloscope1 x Connection Line
Note:
Random shipment of knob col
Xem thêm
#TOP 25
bán oscilloscope cũ
Bảng Mạch Máy Hiện Sóng Dao Động Dso138 2.4 "Tft
Mô tả
Product desceiption:
Training for electronic production , complete detailed descriptive information ,
Including schematics , production guidance , instructions ,
Troubleshooting methods , etc., making a high success rate .
Component species diversity for students to identify elements ,
Inline elements welding, soldering SMD components training.
Students can get in at the same time making a practical tool
For audio, video synchronization , low-frequency switching power supply ,
Infrared receiver transmitter signal waveform and many other occasions,
Effectively observed and measured , increased interest in learning, improve learning outcomes .
Kits using ARM Cortex-M3 processor (STM32F103C8),
And includes a 2.4 -inch color TFT display can be used as test ARM development board .
Available source , the ability of a friend can be secondary development kit based on ,
For example, it can be changed to Millivoltmeter , data loggers , and so on .
Circuit is simple , reliable , inexpensive
Performance
Maximum real-time sampling rate : 1Msps
Accuracy : 12Bit
Sampling buffer depth : 1024 bytes
Analog bandwidth : 0 - 200KHz
Vertical Sensitivity : 10mV / Div - 5V / Div ( 1-2-5 progressive manner )
Adjustable vertical displacement , and with instructions
Input impedance : 1MΩ
Maximum input voltage : 50Vpp (1: 1 probe ), 400Vpp (10: 1 probe )
Coupling modes include DC / AC / GND
The horizontal time base range : 10μs / Div - 50s / Div ( 1-2-5 progressive manner )
With automatic, regular and one-shot mode , easy to capture the moment waveform
Available rising or falling edge trigger
Adjustable trigger level position , and with instructions
Observable trigger waveform before ( negative delay )
Can freeze at any time waveform display (HOLD function )
Comes 1Hz /3.3V square wave test signal source
Package included:
1Pcs
Xem thêm
#TOP 26
bán oscilloscope cũ
Fallingstar 100cm P1204 BNC Male Plug to Safety Banana Coaxial Cable Oscilloscope Test Lead
Mô tả
Features:
1. 100% brand new and high quality
2. Adopted of high quality electronic components, and precision process, ensure for the durability
3. The cable length is 100cm which is long enough to satisfy your needs
4. This is protective BNC male to safety banana plugs cable used for testing.
5. Suitable for oscilloscope test electronic equipment
Specification:
Condition: 100% Brand New
Model: P1204
Transform: BNC to Safety Banana Plug
Impedance: 50Ω 500V / 5A
Length: Approx. 100cm / 39.4in
Main Cable Diameter: Approx. 5mm / 0.2in
Sub-cable Diameter: Approx. 3.5mm / 0.1in
Black Head Length: Approx. 50mm / 2.0in
Red Head Length: Approx. 57mm / 2.2in
Package List:
1 * BNC Male Plug to Safety Banana Plug Cable
8 * Colorful Circ
Xem thêm
#TOP 27
bán oscilloscope cũ
Hantek Max.600V DC Peak AC x1 x10 60MHz 10MΩ Oscilloscope Clip Probe with Accessories
Mô tả
Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations. Attenuation ratio: 1x and 10x optional. Compatible with domestic and international digital and analog oscilloscopes in relevant frequency.
Features:
High quality and reliable.
Attenuation ratio: 1× and 10× adjustable.
Portable design according with ergonomics.
Integral injection molding makes the usage more flexible and the oscilloscope able to adapt more testing situations.
Safety standards: it has passed the CE Attestation of European Community.
Application Fields:
● Compatible with domestic and international digital and analog oscilloscopes in relevant frequency.
● Measurement in intermediate and low frequency signals.
Specifications:
Color: Black + Grey
Type: PP-80 / PP-150 / PP-200 (Optional)
Attenuation: x1 x10
Input Resistance: 1MΩ: 10MΩ
Input Capacitance: x1: 85pF-115pF
x10: 18.5pF-22.5pF
Compensation Range: 20pF ~ 40pF
System Bandwidth: x1: DC-6MHz
x10: DC-60MHz
Input Voltage: x1: <200V DC +Peak AC
x10: <600V DC +Peak AC
Operating Temperature: -10℃ ~ +50℃ / 14℉ ~ 122℉
Non Operating Temperature:-20℃ ~ +75℃ / -4℉ ~ 167℉
Humidity: ≤85% (Relative Humidity)
Cable Length: 120cm / 47.2in
Item Size: Approx. 17 * 2 * 2cm / 6.7 * 0.8 * 0.8in (ONLY Probe)
Item Weight: Approx. 49g / 1.7oz
Package Size: Approx. 20 * 13 * 2cm / 7.9 * 5.1 * 0.8in
Package Weight: Approx. 73.8g / 2.6oz
Package List:
1 * Oscilloscope Probe
1 * Adjustment Tool
1 * Tip Locating Sleeve
6 * Color Circle
1 * Instruction
#hantekprobe #clipprobewithaccessorie #hantekoscilloscopeprobe #oscilloscopeprobe #oscilloscopeclipprobe #200mhzoscilloscopeswitchableclipprobe #hpscopetestleadskit #oscilloscopetestprobe #hantekoscilloscopeclip
Xem thêm
#TOP 28
bán oscilloscope cũ
Digital Oscilloscope Probe MCX Replaceable Test Hook Probes Cable for Mini DSO Nano Quard DSO201 DSO203 DS201 DS203 VC101 VC102 DSO112A
Mô tả
This oscilloscope probe with MCX replaceable type test hook is designed to make measurement process simple and precise. It has compact size and stable performance. The test hook is used to detect the logic signals of the circuit board, especially when the component's feet are close and dense.
Features:
Compact size, several functions combined in one, convenient to use.
Replaceable type test hook, long lifespan and high quality probe hook.
Specially designed for DSO201 DSO203 DS201 DS203 VC101 VC102 DSO112A virtual oscilloscope.
1X probe attenuation, specially designed for detection of circuit board logic signals.
Detachable hook tip, the hook is well protected by the plastic case.
Hook type test clip with safety handle and pressure spring, great choice for oscilloscope probe.
Specifications:
Color: Black + Red
Material: Plastic
Attenuation Ratio: 1:1
Usage: Measurement of Logic
Length: 680mm / 2.23ft
Test Jaw Extension: 7.5mm / 0.30in
Suitable Models: for Mini DSO Nano Quard Pocket Osciloscopio DSO201 DSO203 DS201 DS203 VC101 VC102 DSO112A
Operating Temperature: -15~70℃
Operating Humidity: 0~80%RH
Item Weight: 34g / 1.18oz
Package Size: 11 * 10 * 1cm / 4.33 * 3.94 * 0.39in
Package Weight: 13g / 0.46oz
Package List:
1 * Oscilloscope Probe Cable
1 * Pair of Test
Xem thêm
#TOP 29
bán oscilloscope cũ
Fallingstar P1203 BNC Male Plug to Banana Coaxial Cable Oscilloscope Test Lead 120cm
Mô tả
Features:
1. 100% brand new and high quality
2. Adopted of high quality electronic components, and precision process, ensure for the durability
3. The cable length is 120cm which is long enough to satisfy your needs
4. This is protective BNC male to banana plug cable used for testing.
5. Suitable for oscilloscope test electronic equipment
Specification:
Condition: 100% Brand New
Model: P1203
Transform: BNC to Banana Plug
Impedance: 50Ω 500V / 5A
Length: Approx. 120cm / 47.2in
Main Cable Diameter: Approx. 5mm / 0.2in
Sub-cable Diameter: Approx. 3.5mm / 0.1in
Package List:
1 * BNC to Banana Plug Connecting Cable
8 * Silicone Protective Circles(the color is rand
Xem thêm
#TOP 30
bán oscilloscope cũ
Máy Hiện Sóng Oscilloscope Hantek 2C42
Mô tả
- Model Hantek 2C42 – Series 200 Hantek
-Tần số dao động 40MHz
-Kênh 2CH + DMM
-Phạm vi: 250MSa/s(Single-channel), 125MSa/s(Dual-channel)
-Đường đi của sóng theo dạng (sin x)/x
-Độ dài bản ghi Max. 6K for single-channel; 3K samples per dual-channel
-Phạm vi SEC/ DIV 5ns/div~500s/div 1, 2, 5 sequence
-Tỉ lệ chuyển đổi A/ D 8-bit resolution,each channel sampled simultaneously
Phạm vi đo V/ DIV 10mV/div~10V/divat input BNC
Giới hạn băng thông 20MHz
-Tần số thấp nhất từ -3db ≤10Hz at BNC
-Thời gian băng BNC ≤5ns
-Độ chính xác DC đạt được ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
------------------⭐🌟⭐-----------------
🤩CHUYÊN CUNG CẤP, ORDER CÁC LOẠI LINH KIỆN ĐIỆN TỬ PHỤC VỤ ANH EM THỢ.
🛫 Ship COD toàn quốc, nhận hàng - kiểm tra rồi thanh toán.
👉Shoppe: https://shopee.vn/dientuaz?smtt=0.0.9
👉https://linhkiendientu3h.vn
🥰Bác nào có nhu cầu nhắn tin gửi ảnh hoặc kết bạn #Zalo để được tư vấn nhanh nhất.
☎️Hotline,#Zalo_094498
Xem thêm
bán oscilloscope cũ
Viết bởi
Thiều Hoa được biết đến là thương hiệu Thời trang nữ – Thời trang trung niên, được ra đời bắt nguồn từ sự hiếu thảo của anh Kiệt – Nhà sáng lập Thiều Hoa. Ngay từ thời sinh viên khốn khó, anh đã ý thức được mong muốn của mình sẽ dành tặng cho mẹ những món quà thật ý nghĩa nhất trong dịp lễ Tết. Vì quanh năm mẹ chỉ lo lắng cho gia đình nên không có thời gian chăm chút cho việc ăn mặc. Nhưng tìm kiếm những thương hiệu có trang phục đảm bảo tiêu chí sang trọng và phù hợp với túi tiền anh thời đó thì thật sự rất khó.