Bán may in 3d

Chất lượng hộp mực máy in Xerox P115 hàng nhập khẩu Bản in đẹp: hộp mực in của chúng tôi cho ra bản in đậm đẹp, sắc nét. Với giá thành thấp, Các bạn chỉ việc mua về gắn vào sử dụng, không phải nạp mực, bụi bẩn,... Năng suất trang in lớn lên đến 1500 trang giúp bạn tiết kiệm tối đa chi phí sử dụng mực. Lưu ý: Các bạn ở TPHCM cần mực gấp có thể liên lạc trực tiếp với chúng tôi theo số điện thoại nhé. Thông số hộp mực máy in Xerox P115 Mã mực: CT202137 Số lượng trang in ước tính 1500 trang/ độ phủ 5% trên mỗi hộp mực (khổ Letter / A4) Tương thích với các dòng máy in: Fuji Xerox DocuPrint P115w, Fuji Xerox DocuPrint M115w, Fuji Xerox DocuPrint M115fw Hàng nguyên đai nguyên kiện mới 100% Bảo hành 3 tháng hoặc đến hết mực. Mực máy in Xerox P115 tháo lắp dể dàng. Bước 1: Mở nắp máy in và lấy Cụm drum và hộp mực cũ đã hết mực hoặc hư hỏng ra khỏi máy. Bước 2: tách hộp mực đã hết mực ra khỏi cụm drum. bằng cách nhấn lãy màu xanh ở phía bên phải của cụm drum và nhấc hộp mực ra. Bước 3 : Tháo hộp mực in mới ra khỏi bao bì, Lắc hộp mực từ bên này sang bên kia 4-5 lần để phân bố lại lượng mực, vì trong quá trình vận chuyển có thể mực bị dồn về một phía. Bước 4 : mở nắp bảo vệ trục từ ra. (màu vàng hoặc màu cam) Bước 5 : Gắn hộp mực vào cụm drum (khi gắn vào các bạn sẽ nghe tiếng tạch và lãy màu xanh được nâng lên, hộp mực được cố định trong cụm drum) Bước 6: Gắn cụm drum vào lại máy và in thử. Hộp mực được đóng gói cẩn thận 3 lớp 1. Bao ni long chống ẩm 2. Túi khi chống sốc (Hoặc xốp giữ hộp mực chống sốc) 3. Hộp giấy bên ngoài. Hotline, Zalo mua hàng: 0902991149 #mực_xerox_p115w #mựcxeroxp115w #mựcmáyinxerox #Mực_Xerox #mực_máy_in _xerox #hộp_mực_xerox_p115w #hộpmựcmáyinxeroxp115w #hộp_mực_máy_in_xerox_p115w #xeroxp115w #xerox_p115w #hộpmựcxerox #hộp_mực_xerox #Mựcinxerox #MựcXerox #máyinxeroxp115w #máy_in_xerox_p115w #hộpmựcmáyinxeroxm115z #hộp_mực_máy_in_xerox_

Before making reservations, please read it first, because we do not expect to disappoint our customers. As long as the goods still have postings it means stock the product is ready, so it can be in order direct. For reservations if a choice of color options is requested to include color information and options if the color is empty or (call cs). Thank you Size is in the photo Note: List the color requested in the description yes Pay attention, please. 1. We 've ordered qc both in number and quality, (give the note an alternative color choice, if it' s empty we 'll notify it through chat features and we' ll wait for a 1x24-hour response, no chat response then the color will be changed to a similar color / random) 2. Damage / loss of package in delivery beyond our responsibility (can claim directly to the chosen courier party) 3. Wait for the next order invite friends and family yes! 4. Thank you. ~ ~ > > > customer satisfaction is our primary goal < < < ~ ~ ~ ~ > > > > > thank you for your visit < < < < < <

Specification: Brand new Material: Aluminium Alloy - 6063 T5 Color: silver Size: approx. 20*40mm Length: approx. 500mm High strength and hardness. Durable in use. Used to professional 3D printers, plasma, lasers, stands, furniture etc. Package included: 1 x Aluminum Profiles Note: Please allow 1-3cm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated

High temperature resistance Chemical resistant Ultimate non-stick surface UV stable Colour:Transparent color Material:PE film Size:270 x 200 x 0.15mm Package Contents: 4 x FEP filmOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Reprap description 3d printing solid state relay ssr-40dd Reprap 3d printing solid state relay ssr

500mm Length 2040 T-Slot Aluminum Profiles Extrusion Frame For CNC Applications: Professional 3D Printers, Plasma, Lasers, Stands, Furniture, etc. Tolerances: Length(+/- 3mm) Dimension: 20mm x 40mm 7. Length: 500mm ; (1cm=0.39Inches) Color: sier Material: aluminum alloy Package Contents: 1* Printer Extrusion RackOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Đặc trưng máy in 3d Anet ET5 / ET5X / ET5 pro - Máy in thiết kế dạng module, máy in 3d chỉ mất 10 phút để cài đặt và sử dụng, tiết kiệm thời gian và công sức. - Thiết kế nguyên khối bằng kim loại bao quanh cho phép cấu trúc ổn định và đáng tin cậy. - Máy có chức năng tự cân bàn. - Chức năng phát hiện hết nhựa và nhắc nhở kịp thời. - Chức năng tự động in tiếp tục sau khi mất điện, khi có điện lại máy in tiếp tục in từ điểm bị gián đoạn, không lo mất điện đột xuất. - Tự động bổ sung và rút nhựa chỉ với một cú nhấp chuột. - Màn hình cảm ứng đủ màu 3.5 inch giúp bạn dễ dàng thao tác. - Được bảo vệ với các tính năng an toàn như bảo vệ quá dòng, bảo vệ quá tải, bảo vệ quá nhiệt, cảnh báo trước nhiệt độ. (Tự động tắt công tắc sưởi) - Được trang bị bàn nhiệt bằng nhôm và kính cường lực, giường sưởi nhanh trong vòng chưa đầy 5 phút, in mô hình phẳng và mịn, dễ dàng dán và tháo vật in. - Con lăn Vslot chính xác trên trục X và Y giúp giảm tiếng ồn khi in và cung cấp độ chính xác in cực cao. - Hỗ trợ các sợi nhựa in 1,75mm khác nhau như PLA, HIPS, Wood, v.v. - Được sử dụng rộng rãi trong đồ chơi, kiến ​​trúc, nội thất, giáo dục, y tế, nhu yếu phẩm hàng ngày và các lĩnh vực khác. Thông số kỹ thuật: Model: Anet ET5 / ET5X / ET5 pro Màu: - ET5 màu đỏ và đen - ET5X màu xanh nước biển và đen - ET5 pro màu đen Nguồn điện: 240V AC 350W Cấu trúc: Khung kim loại Công nghệ in: FDM Số lượng máy đùn: 1 Kích thước in: 300x300x400mm Độ phân giải in: 0,1mm Độ dày lớp: 0,1-0,3mm Chế độ kết nối: In trực tuyến / ngoại tuyến Màn hình LCD: Màn hình cảm ứng 3.5 inch Tốc độ in: 20-150mm / s (tốc độ khuyến nghị 30-60mm / s) Đường kính kim phun tiêu chuẩn: 0,4mm Nhiệt độ làm việc của đầu đùn (Tối đa): 250 ℃ Nhiệt độ bàn nhiệt (Tối đa): 100 ℃. Khuyến cáo 60 ℃ Chất liệu tấm nóng: tấm nhôm và kính cường lực Độ chính xác trục XY: 0,012mm Độ chính xác trục Z : 0,004mm Nguyên liệu in: PLA, HIPS, Wood, v.v. Đường kính sợi: 1,75mm Sợi được đề xuất: PLA Ngôn ngữ phần mềm điều khiển: tiếng Anh / tiếng Trung Định dạng đầu vào dữ liệu: STL, OBJ, G-Code Định dạng đầu ra dữ liệu: Gco, Gcode Hệ điều hành: Windows, MAC Phần mềm in: Cura, Repetier, Simplify3D Kích thước máy: 44.0 x 34.0 x 48.0cm / 17.3 x 13.4 x 18.9in Kích thước đóng gói: 48.0 x 45.5 x 21.0cm / 18.9 x 18.0 x 8.3in Trọng lượng máy: Khoảng 9.7kg Trọng lượng gói hàng 15.2kg Ghi chú: ET5X cân bàn thủ công, trục z có công tắc hành trình Endstop Z, driver a4988. ET5 cân bàn tự động, driver a4988. ET5 pro cân bàn tự động, driver TMC 2208 silent. Màu sắc của 10m nhựa PLA tặng kèm là ngẫu nhiên. Danh sách gói hàng: 1 x Bộ máy in 3D #ET4 #ET4X #mayin3d #FDM #fdm #3dprinter #PLA #PETG #ABS #anycubic #anet #resin

Description: Form a perfect solution for custom machine frames, workstations, prototyping, guarding and many more purposes. The extrusion are a great framing material as they are adjustable and can hold T-Slot Nuts on all 4 Grooved Surface sides. High strength and hardness. Durable in use. Used to professional 3D printers, stands, furniture etc. Specification: Material: aluminium alloy Color: Black 50cm: Size: Approx. 500x 20x 20mm/ 19.69x 0.79x 0.79inch Package Includes: 2 Pieces Aluminum Profiles Note: The color may have different as the difference display, pls understand. Please allow 1-3mm error due to hand

Do you want to enjoy high-quality experience? Then get into our store and pick it up.! Decription: Specifications: Temperature resistance: 200°C Temperature sensor:100KΩ Resistance accuracy: ±1% R25/50:3950K Quantity:5 Pcs Wiring length:1.1m Working temperature range: -40°C ~ 300°C Dissipative power coefficient:≥5 mW /°C(in static air) Thermal time constant:≤7s(in static air) Maximum rated power: 45mW Features: Use for heated bed or extruder It has 2 pin female connector Temperature sensor 100KΩ accuracy of ± 1% Included: 5 x NTC 3950 100K Thermistor With Female

Welcome to my shop, wish you have a happy day!!! [Newyear]5Pcs 3D Printer Nozzle Cleaning Needles Kit Stainless Steel Cleaning Tool Description: 100% brand new & high quality. Features: 3D Printer nozzle cleaning needle with diameter of 0.2mm/0.25mm/0.3mm/ 0.35mm/ 0.4mm. For all 0.4mm nozzle (for Reprap, for Ultimaker, for Makerbot, for Flashforge and more). The tip of the needle is smooth and sharp. The needle body has the advantages of high strength and good toughness. Unique needle handle and needle body construction. Can effectively clean the nozzle of 3D printer, nozzle will not easily be damaged. Specifications: Item Type: Nozzle Cleaning Needle For 3D Printer Material: Stainless Steel Color: Silver Diameter:0.2/0.25/0.3/ 0.35/0.4mm Quantity: 5Pcs Note: 1.Transition: 1cm=10mm=0.39inch 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! 4.No retail package Package includes: 5Pcs x Nozzle Cleaning Ne

Reprap 3d printing solid state relay mgr-1 dd220d40 Load current: 40a, control current: Dc 5-25ma Load voltage: 5-220v dc; control voltage: 3-32v dc 4.4mm diameter mounting hole Size: 58x45 x

Apply to for Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc. From the ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful. From the 40W power to 50W, the maximum temperature increases from 300-31Celsius to 340-350Celsius. Can be used with the new HT-NTC100K temperature thermistor. The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life. Colour:white Material:metal Package Contents: 3 * 24V 50W Ceramic Cartridge HeaterOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

500mm Length 2040 T-Slot Aluminum Profiles Extrusion Frame For CNC Applications: Professional 3D Printers, Plasma, Lasers, Stands, Furniture, etc. Tolerances: Length(+/- 3mm) Dimension: 20mm x 40mm 7. Length: 500mm ; (1cm=0.39Inches) Color: sier Material: aluminum alloy Package Contents: 1* Printer Extrusion RackOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: MK10 assembled extruder hotend kit is compatible with X5SA/X5SAPRO/XY-2PRO 3D printer. 0.4mm nozzle; 1.75 filament size; aluminum heating block; and heater wire 24V 50W. 100K ohm thermistor with pin head, 1 meter PTFE tube for 1.75mm filament. Made of aluminum, with excellent heat resistance and heat insulation, durable and smooth printing. Nozzle with silicone protective cover, safer and faster heating. Specifications: Heat Sink Material: Aluminum Heater Block Material: Aluminum Nozzle Material: Brass Filament Diameter: for 1.75mm Nozzle Size: 0.4mm Heating Wire: 24V 50W Tube Length: 1m/ 3.3ft Heater Block Size: 23 * 23 * 13mm/ 0.9 * 0.9 * 0.5in Package Size: 18 * 15 * 3cm / 7.1 * 5.9 * 1.2in Package Weight: 88g / 3.1oz Packing List: 1 * Hotend Extrude

High temperature resistance Chemical resistant Ultimate non-stick surface UV stable Colour:Transparent color Material:PE film Size:270 x 200 x 0.15mm Package Contents: 4 x FEP filmOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Screw mainly used in stepper motor, Machine Tool, and other equipment. Screw without processing, direct connected to bearing. Suitable for Industrial automation equipment, stepper motor rails; such as 3D printers; engraving machine; XYZ ule; slider; lifts etc. color: gold+sier Lead screw: Material: stainless steel Diameter: 8mm spacing: 2mm Total Length: 500mm Screw nut: Material: brass Diameter: 8mm Mounted ball bearing: Material: zinc alloy Bore diameter: 5mm Hole diameter: 8mm Total length: 55mm Height: 29mm Shaft coupling: Material: aluminium Shaft: 6.35 x 8mm Length: 24mm Diameter: 18mm How to install: 1. Pls put screw nut into the Lead screw 2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw 3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing 4. Put shaft coupling into the Lead screw beside the Mounted ball bearing Package Included: 1x Lead screw 1x Screw nut 2x Mounted ball bearing 1x Shaft coupling Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

For: V6 Support Filament: 1.75mm 3D Printer Parts Threaded heat pipe Compatible with long-range short-range Colour: sier Material: aluminum alloy Size: height 37.5mm Package Contents: 5 x radiatorsOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! Original creality cr-10s pro 3d printer hotend thermi

Specification: Brand new Material: Aluminium Alloy - 6063 T5 Color: silver Size: approx. 20*40mm Length: approx. 500mm High strength and hardness. Durable in use. Used to professional 3D printers, plasma, lasers, stands, furniture etc. Package included: 1 x Aluminum Profiles Note: Please allow 1-3cm errors due to manual measurement. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated s

Screw mainly used in stepper motor, Machine Tool, and other equipment. Screw without processing, direct connected to bearing. Suitable for Industrial automation equipment, stepper motor rails; such as 3D printers; engraving machine; XYZ ule; slider; lifts etc. color: gold+sier Lead screw: Material: stainless steel Diameter: 8mm spacing: 2mm Total Length: 500mm Screw nut: Material: brass Diameter: 8mm Mounted ball bearing: Material: zinc alloy Bore diameter: 5mm Hole diameter: 8mm Total length: 55mm Height: 29mm Shaft coupling: Material: aluminium Shaft: 6.35 x 8mm Length: 24mm Diameter: 18mm How to install: 1. Pls put screw nut into the Lead screw 2.Then the 2 Mounted ball bearing separately install at both ends of the Lead screw 3. According to the size of you need to adjust the distance between the nut and Mounted ball bearing 4. Put shaft coupling into the Lead screw beside the Mounted ball bearing Package Included: 1x Lead screw 1x Screw nut 2x Mounted ball bearing 1x Shaft coupling Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! 3d zaiku indonesia Original creality cr-10 v2 3d printer hotend thermi

E3d v6 3d printer description throat / heat break straight-through 4.1mm Heat break / throat e3d v6 Suitable for e3d v6 jhead long type heatsink Stainless steel material: Type: Straight-through (ptfe straight through) Bore: 4.1mm Filament size: 1.75mm Price inscribed for: 1x e3d v6 3d printer straight through 4.1mm heat

The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. You will got smoother movement especially on the delta-style 3Dprinter under DVR8825 stepper driver and A4988/ 2 drivers. Lower vbration lower noise smoother result! colour: Photo Color material: ABS Package Contents: 4xTL-Smoother V1.0 Addon ule(with 4pcs line)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: LM8UU Bearing is suitable for RepRap Mendel 3D printers. Made of plastic material. Plastic linear bearings can remove vibrations and unnecessary noise. If you add lubricating oil, It will be smoother. The inner diameter will be slightly larger than the 8mm metal rod. This is to reduce unnecessary friction and ensure smoothness. Color: Yellow material: plastic Inner Diameter: 8mm Outer Diameter: 15mm Length: 24mm Per Item Weight: 4g / 0.1oz Package Included: 10 * LM8UU Bearings Note: This plastic bearing is particularly used for 3D printers(large machines are not recommended)Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Hello! Nice to meet you! Welcome to our shop! Check out our shop daily for the latest products We are an ethical business where prices are always affordable and reasonable No worries! You are guaranteed to be satisfied with the quality of our products It is checked rigorously multiple times before it reaches you Feel free to contact us if you have any questions Have a nice day and don’t forget to give us 5 stars if you enjoy your product Thank you for visiting! Hope you have an outstanding shopping experience! 3d zaiku indonesia Original creality ender 3 / 3 pro / v2 hotbed thermistor 3d pri

High temperature resistance Chemical resistant Ultimate non-stick surface UV stable Colour:Transparent color Material:PE film Size:270 x 200 x 0.15mm Package Contents: 4 x FEP filmOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Reprap 3d printing meger solid state relay ssr-1 d4840 Load current 10a,25a,40a,60a,75a,90a,120a Load voltage. 480vac. Current control Dc5-25ma. Voltage control 4-32vdc. On voltage. 2.3v Off leakage current. 2ma On-off time. 10ms Dielectric strength 2000vac. Insulin resistance. 1000 m / 500vdc Ambient temperature -20 °C ~ + 75. °C Mounting methods Bolting The working instructions. Led Weight.

Product Name: z-axis screw holder upgrade Colour:black Material:Injection molding Size: 3.28 x 3.28 x 2cm Package Contents: 1 x Z axis Lead Screw fix mountOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

el: 2GT Color: Black Main Material: Rubber, Aluminum Teeth: 16 Bandwidth: 6mm Hole: 5mm Overall Length: 2M Suitable For: 3D Printer Parts RepRap Prusa Accurate transmission, without slipping at work, having a constant gear ratio Smooth transmission, a buffer, damping capacity, low noise High transmission efficiency, energy-saving effect Easy maintenance, no lubricants Packing Included 2 x synchronous wheel 1 x timing belt 1 x wrench Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

[Great 3D Printer Nozzle and Cleaning Kit]Comes with 15pcs 0.40mm MK8 extruder nozzles, 10pcs cleaning with container, 2 tweezers. Durable brass nozzles: made of high quality brass, sturdy and durable, input diameter is 1.75 mm, output diameter is 0.4 mm, and hexagonal diameter is 6 mm, suitable for Makerbot Anet A8, Creality CR-10 CR-10S S4 S5, compatible with all 1.75 mm PLA, ABS 3D printers. ANTISTATIC NON MAGNETIC tweezers: Ergonomic design, easy to use, straight and curved precision tweezers available, perfect for 3D printer nozzle maintenance, cleaning extruder hotends and cleaning excess support material (PLA/ABS filament). FLEXIBLE STAINLESS STEEL : 0.4mm diameter will not break, rotate easily, perfect for gently maintaining your 0.4mm nozzles and hard to reach places such as neck and feeder equipment. MULTIPURPOSE CLEANING TOOL KIT: Remove excess plastic and clear jams with high precision, also perfect for general maintenance of the heat sink. Colour:Gold+sier+black Material:metal Size:: 0.4mm Package Contents: 15 x 1.75/0.4 mm Print Head MK8 Nozzle 10 x Cleaning 2 x Antistatic Tweezers 1 x boxOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1